FX Exploit AutoPilot detailed description (interface)

FX Exploit AutoPilot detailed description (interface)

2 December 2019, 10:30
Aliaksandr Kryvanos
0
89

Instruction to the FX Exploit AutoPilot expert advisor interface: 

Product page: https://www.mql5.com/en/market/product/43923


===============================================================================

Left 28x5 matrix monitoring of market activity
Column "A" the total activity on the basis of which the concluded of market activity:

*Activity is a measure of directional price movement

Activity settings set the filter to determine the market activity

An audible alarm for increased activity is possible at a frequency of 1 time in x minutes

Activity alert On/Off button enables/disables the high/very high activity alarm (alerts):


Default activity filter 95% (can be adjusted between 90-99%):


Number of active pairs, activity filter, define market activity:

In the wide flat at low activity, quite wide movements are possible, especially on GBP pairs

So the trade from morning European session to end of the Americans session

===============================================================================

The buttons with currency pair names are located to the right:


Clicking on the button opens the corresponding chart of the currency pair with the TF and template that you set in the settings:



To the right of the buttons is the spread column for all pairs:


Feeding is possible an audible alert about spread exceeding, if the spread is 7 or more pairs higher than the maximum value:

A warning will be displayed once in x minutes, on/off this feature can be enabled/disabled by pressing the Spread alert on/off button (**This is protection against a very high spread, the spread was up to 500 points (5 digits) during the referendum on brexit):


the spread above the maximum value (Max spread value) in the column is displayed in a different color:


===============================================================================

Signal column - output of signals for trading:


Signal indicator (fx calm trader) works on D1 and looks for reversals in a calm market during a wide flat

The Signal On/Off button enables and disables the audible signals from the signal indicator:


the Clear signals button clears the signal column (this is the main function):


2 parameters are available for the signal indicator in the settings:


the signal indicator indicates the price level, which is either a reversal or a return

If the price is higher or lower than this level, the signal indicator gives signals with a frequency of 1 time in X minutes (in the settings), i.e. the signal repeats

(can enable notification)

===============================================================================

Action buttons for manual trading and setting of SL/TP:


Position manager columns specifying the number of positions by type (how many buy/sell positions are separately)
lots

Profit/loss (profitable trades are highlighted in green, loss - red):



The button for closing open positions closes all positions by the corresponding symbol:



You can set up to show the buttons of closing only purchases and sales only:



===============================================================================

Trailing button On/Off:


The settings can always be set to be the active button:

trailing is multi-currency and monitors both single transactions and the basket of orders (from the breakeven point of the grid orders one symbol at a time)

===============================================================================

Basket button On/Off:

the settings can always be set to be the active button:

If button enable, the Expert Advisor will close all transactions with total profit or loss 

===============================================================================

Profit and loss panel:

===============================================================================

Displays the lot used for each trade:

===============================================================================

Set button for all SL/TP positions (one click to set and remove SL/TP):

===============================================================================

===============================================================================

Autopilot panel:

Button to enable or disable autopilot functions (autotrade):

The autopilot button does not work if the Expert Advisor is not allowed to trade automatically



===============================================================================


===============================================================================

More info read:

1). https://www.mql5.com/en/market/product/43194#!tab=comments
2). https://www.mql5.com/en/market/product/42942#!tab=comments
3). https://www.mql5.com/en/market/product/43353#!tab=comments
4). https://www.mql5.com/en/market/product/43923#!tab=comments




Share it with friends: