Instructions, recommendations, advices on the system (robot) Twin_HEDGE_DC.

Instructions, recommendations, advices on the system (robot) Twin_HEDGE_DC.

14 November 2018, 12:13
Stanislau Siatsko
8
2 886

This is a step-by-step instruction for using all 6 sets, 24 different ligaments - 48 currency pairs on one account. 

Choose EA for your trading platphorm MT4 or MT5:

Twin_HEDGE_DC MT4 version: https://www.mql5.com/en/market/product/32945 
Twin_HEDGE_DC MT5 version: https://www.mql5.com/en/market/product/47779

  download the actual .set files (Set_N1, Set-N2 and Set-N3) for Twin_HEDGE_DC you can on this page (at the end of description)

Files:

For MetaTrader 4 (MT4) or MetaTrader 5 (MT5):

Set-N1__Twin_HEDGE_DC__v.8.0_(28.03.2020).set 
Set-N2__Twin_HEDGE_DC__v.8.0_.set - updating/testing works are in progress
Set-N3__Twin_HEDGE_DC__v.8.0_.set - updating/testing works are in progress

Set-N4__Twin_HEDGE_DC__v.8.0_.set - updating/testing works are in progress
Set-N5__Twin_HEDGE_DC__v.8.0_.set - updating/testing works are in progress
Set-N6__Twin_HEDGE_DC__v.8.0_.set - updating/testing works are in progress


Recommendations and Account requirements:

  • Starting balance: no less $3000
  • Leverage: starting from 1:200... and more
  • Account Type: Any (preferably ECN)
  • Broker: Any MT4/MT5 broker (without using FIFO rules). Make sure that your broker does not use FIFO rules, otherwise it will prevent the correct operation of all systems simultaneously on the same account.

In my live trading I start with initial Balance = $3000 and use these setting in each Set:

..........Risk_value                        = 0.30
..........GLOBAL_Profit                     = 0.54
..........Use_Special_Tactic_Automatically  = true
..........Profit_for_one_Ligament           = 0.15


    Very IMPORTANT!!! 

    I recommend use this rule for using this portfolio of all strategies on your account: Need to introduce strategies into trade gradually, and not all at once. For example, at the very beginning, 

    • ...... we run  Twin_HEDGE_DC_EA with Twin_HEDGE_Set_N1,
    • then after 1-2 weeks
    • ...... we run  Twin_HEDGE_DC_EA with Twin_HEDGE_Set_N2,
    • then after 1-2 weeks 
    • ...... we run  Twin_HEDGE_DC_EA with Twin_HEDGE_Set_N3,
    • then after 1-2 weeks 
    • ...... we run  Twin_HEDGE_DC_EA with Twin_HEDGE_Set_N4,
    • then after 1-2 weeks 
    • ...... we run  Twin_HEDGE_DC_EA with Twin_HEDGE_Set_N5,
    • then after 1-2 weeks 
    • ...... we run  Twin_HEDGE_DC_EA with Twin_HEDGE_Set_N6,

    Just know: the longer the interval between the launch of a follow-up strategy into trade, the more balanced and diversified trade will be, and the lower the drawdown will be.




    1. Proper preparation of the MT4/MT5 terminal for trading.


    First make sure that all (28) currency pairs used in trading are loaded (displayed) in the window  Market Watch:


    • Set-N1_Twin_HEDGE need attached to <EURUSD> chart. This .set trade by these pairs: EURUSD, GBPJPY, GBPAUD, EURNZD, USDCHF, NZDCHF, NZDJPY, USDJPY.
    • Set-N2_Twin_HEDGE need attached to <AUDJPY> chart. This .set trade by these pairs: AUDJPY, NZDCAD, NZDUSD, EURCAD, AUDCHF, GBPCHF, GBPUSD, EURJPY.
    • Set-N3_Twin_HEDGE need attached to <AUDCHF> chart. This .set trade by these pairs: AUDCHF, AUDNZD, USDCAD, GBPCAD, EURCHF, CADJPY, GBPNZD, EURAUD.

    • Set-N4_Twin_HEDGE need attached to <AUDCAD> chart. This .set trade by these pairs: AUDCAD, EURJPY, USDJPY, GBPJPY, EURAUD, GBPAUD, GBPUSD, AUDCHF.
    • Set-N5_Twin_HEDGE need attached to <EURCHF> chart. This .set trade by these pairs: EURCHF, GBPCHF, NZDCAD, EURUSD, CADJPY, NZDCHF, GBPJPY, USDCHF.
    • Set-N6_Twin_HEDGE need attached to <NZDUSD> chart. This .set trade by these pairs: NZDUSD, AUDJPY, GBPCAD, AUDUSD, NZDJPY, CHFJPY, GBPNZD, EURNZD.




    2. 


    Used EA: Twin_HEDGE_DC:


    2.1 Open EURUSD chart:

    • Attach Twin_HEDGE_DC to the EURUSD chart (without pressing OK!).
    • Immediately in the settings <Inputs> click <Load> and load the file <_1___EURUSD___Set_N1_Twin_HEDGE___.set>
    • Make sure that in the settings <Common> selected <Allow live trading>, and only then confirm by pressing <OK>.

    2.2 Open AUDJPY chart:

    • Attach Twin_HEDGE_DC to the AUDJPY chart (without pressing OK!).
    • Immediately in the settings <Inputs> click <Load> and load the file <_2___AUDJPY___Set_N2_Twin_HEDGE___.set>
    • Make sure that in the settings <Common> selected <Allow live trading>, and only then confirm by pressing <OK>.

    2.3. Open AUDCHF chart:

    • Attach Twin_HEDGE_DC to the AUDHF chart (without pressing OK!).
    • Immediately in the settings <Inputs> click <Load> and load the file <_3___AUDCHF___Set_N3_Twin_HEDGE___.set>
    • Make sure that in the settings <Common> selected <Allow live trading>, and only then confirm by pressing <OK>.

    2.4. Open AUDCAD chart:

    • Attach Twin_HEDGE_DC to the AUDCAD chart (without pressing OK!).
    • Immediately in the settings <Inputs> click <Load> and load the file <_4___AUDCAD___Set_N4_Twin_HEDGE___.set>
    • Make sure that in the settings <Common> selected <Allow live trading>, and only then confirm by pressing <OK>.

    2.5. Open EURCHF chart:

    • Attach Twin_HEDGE_DC to the EURCHF chart (without pressing OK!).
    • Immediately in the settings <Inputs> click <Load> and load the file <_5___EURCHF___Set_N5_Twin_HEDGE___.set>
    • Make sure that in the settings <Common> selected <Allow live trading>, and only then confirm by pressing <OK>.

    2.6. Open NZDUSD chart:

    • Attach Twin_HEDGE_DC to the NZDUSD chart (without pressing OK!).
    • Immediately in the settings <Inputs> click <Load> and load the file <_6___NZDUSD___Set_N6_Twin_HEDGE___.set>
    • Make sure that in the settings <Common> selected <Allow live trading>, and only then confirm by pressing <OK>.




    3. Switch ON auto trading in MT4:


    Click on button <AutoTrading>:




    The most significant input parameters:

    • Tradind_MODE                                  = Medium – The choice of trade mode. Affects the frequency of entry into the market.
    • _Custom                                       = 1.0    – Setting custom parameters for the trade mode (values from 0.1 to 2+), works only when Tradind_MODE=Custom The smaller the value, the more often the entrances to the market.
    • Step_between_Orders_MODE                      = Normal – Selection of the operation mode for adding orders of one ligament.
    • Custom_step                                   = 1.0    - Setting user parameters for adding orders (values from 0.1 to 2+), works only when Step_between_Orders_MODE=Custom The smaller the value, the closer the additional order will be to the last order.
    • Risk_value                                    = 1.0    – Risk level Affects lot size. The higher the value, the larger the lot size.
    • Use_GLOBAL_Closing                            = true   – Enables / disables order closing function.
    • GLOBAL_Stop                                   = 100.0  – Stop level in% of the deposit to close all orders. Values are set individually for each trader and for his style. When trading all 24 pairs and using the settings of Set-N1, Set-N2 and Set-N3, the maximum risk reached 12%.
    • GLOBAL_Profit                                 = 0.35   – Profit level in% of the deposit for closing all orders on one set.
    • MaxTrades_for_one_pair                        = 5      – The maximum number of ligaments when adding.
    • k_Lots                                        = 1.0    – The multiplying factor of the lot, for each subsequent opening position. If =1 - the lot is the same for all orders.
    • Use_Panel                                     = true   – Enables / disables the information panel.
    • DisableAllTrade_InfoOnly                      = false  – Turns off all trade, but displays the current trading situation. Useful if trading work from VPS at terminal MT4.
    • Symbol_1 .... Symbol_8                        = true   – Currency pairs used in trading.
    • MoneyManagement                               = true   – Enable / disable money management (automatic calculation of the lot on the size of the deposit).
    • UseAccountFreeMargin                          = false  – The calculation of the lot is relatively free margin. If false, the calculation is from the Balance.
    • Lot_size_by_Deposit_Currency                  = false  – To consider deposit currency when calculating lot.
    • Lots                                          = 0.01   – Lot size for opening positions. Works only when MoneyManagement = false
    • Symbol_1_BUY_Signal_1..Symbol_8_BUY_Signal_1  = true   – Enable / disable trading on the selected currency pair.


    Any questions - just contact me.

    -------------------------------
    Sincerely, Stanislau.
    http://forex-expert-advisor.com

    Share it with friends: