Telegram Coppy Custom
- Utilities
-
Sergey Batudayev
Hello!
My name is Sergey, I have been trading in financial markets since 2014. Since 2018, I have been developing applications and utilities that I myself use in my trading.
I have a master's degree in finance. - Version: 2.3
- Updated: 4 May 2026
- Activations: 5
Telegram Coppy Custom for MT5
Telegram Coppy Custom for MT5 is a special extended edition of the regular TG Coppy 1.57, created for traders who need more advanced post-entry trade management, stricter signal lifecycle control, and more flexible automation logic than the standard version provides.
While the regular version is focused on Telegram signal copying and general trade execution, Telegram Coppy Custom adds a dedicated Advanced Custom Management block with new logic for trade handling after entry. This includes custom TP milestone management, FXGDP-style timeout behavior, advanced trigger-based trailing, additional entry filtering, and several new controls for how SL, TP, and trade state are managed.
Main difference from the regular TG Coppy 1.57
The standard TG Coppy 1.57 is a powerful Telegram-to-MT5 copier, but this Custom version goes much further by adding a separate management engine for traders who want to control what happens to a trade after it has been opened.
- Dedicated Advanced Custom Management engine
- Optional multiple trades per one signal
- Flexible choice of whether to use signal SL and signal TP
- Custom single-trade TP selection mode for one-trade scenarios
- Advanced break-even logic with configurable trigger and offset
- TP-level management mode where TP milestones control SL movement
- FXGDP-style 2-day time rule with automatic trade-state actions
- Custom trigger step trailing with up to 10 independent trigger levels
- Entry blocking logic if TP1 has already been reached before entry
- Blocking of new trades for the same signal after TP1
- Additional debug/testing logs for easier scenario validation
Advanced Custom Management
The biggest upgrade in Telegram Coppy Custom is the new Advanced Custom Management section. This block adds a separate management workflow on top of the normal copier logic, allowing the user to control how trades behave after opening.
- Enable custom management engine
- Allow multiple trades per signal
- Set maximum number of trades per signal
- Choose whether SL should come from the signal
- Choose whether TP should come from the signal
- Select which TP to keep in single-trade mode:
- Keep default
- Use first TP
- Use last TP
This makes Telegram Coppy Custom much more flexible for traders who do not want to follow the signal structure exactly as it comes from Telegram.
TP-Level Management Mode
One of the key additions in Telegram Coppy Custom is TP-Level Management Mode. In this mode, the TP ladder is not used only as profit targets — it becomes a management framework for Stop Loss movement.
This means TP levels can act as milestones for trade protection:
- When TP1 is reached, SL can be moved to Break Even
- When TP2 is reached, SL can be moved to TP1
- When TP3 is reached, SL can be moved to TP2
- And so on, step by step through the stored TP structure
This is a major difference from the regular TG Coppy 1.57, because it allows the copier to manage trades according to the original target ladder instead of using only standard trailing behavior.
FXGDP TIME RULE
Another major Custom feature is the FXGDP TIME RULE block. This logic introduces an FXGDP-style timeout model, designed for signals that should not remain unmanaged for too long if TP1 has not been reached.
- Enable FXGDP-style 2-day time rule
- Use automatic FXGDP state logic
- Define near-entry threshold in points
- Select legacy timeout action if automatic mode is disabled
- Block new trades for the same signal after TP1
- Block entry if TP1 was already reached before the trade could open
- Use test timeout override instead of the real 2-day rule
- Set test timeout in minutes for easier scenario testing
Automatic FXGDP trade-state logic
When the automatic FXGDP logic is enabled, the copier can apply different actions depending on where the trade is at timeout:
- If the trade is still at or near entry, it can close the trade
- If the trade is already in profit, it can move SL to entry
- If the trade is in loss, it can move TP to entry
This is far more advanced than the regular version because the timeout result is not fixed — it depends on the actual state of the position.
If automatic mode is turned off, a legacy action can still be selected manually:
- Close trade
- Move SL to entry
- Move TP to entry
TP1-based protection and entry filtering
Telegram Coppy Custom also adds new TP1-based protective logic that does not exist in the standard workflow.
- Track TP1 status for each managed trade
- Move SL to entry automatically when TP1 is reached in FXGDP mode
- Block new trades for the same signal after TP1
- Skip late entry if TP1 has already been reached before the trade opens
This helps avoid bad late entries and prevents the copier from opening new positions on signals that have already moved too far.
Custom Trigger Step Trailing
Telegram Coppy Custom also introduces a much more advanced alternative to simple trailing stop logic: Custom Trigger Step Trailing.
Instead of one standard trailing mode, the user can configure up to 10 independent trigger levels, each with its own trailing behavior.
- Trigger 1 + trailing step 1
- Trigger 2 + trailing step 2
- Trigger 3 + trailing step 3
- Trigger 4 + trailing step 4
- Trigger 5 + trailing step 5
- Trigger 6 + trailing step 6
- Trigger 7 + trailing step 7
- Trigger 8 + trailing step 8
- Trigger 9 + trailing step 9
- Trigger 10 + trailing step 10
Each trigger is measured in points from entry. When a trigger is reached, the corresponding trailing step becomes active. If the step is set to 0, it can behave like a break-even style milestone instead of full trailing.
This gives the trader much finer control over how protection evolves as profit grows, which is a major upgrade over the regular trailing logic of TG Coppy 1.57.
Advanced Break Even logic
Telegram Coppy Custom extends break-even control inside the flexible management engine.
- Set a custom break-even trigger in points
- Add an extra offset in points to the break-even price
- Use break-even as part of milestone logic or as a separate management stage
This allows more precise protection compared to a simple SL-to-entry move.
Custom TP ladder and independent automation
Telegram Coppy Custom extends advanced profit-management logic by combining signal TP handling with custom TP ladder automation.
- Use Custom TP1 to TP6 ladder
- Choose TP unit in Price / Pips / Points
- Set individual values for TP1, TP2, TP3, TP4, TP5, TP6
In addition, the product includes a separate independent partial-close automation mode:
- Auto Close % After X Points
- Set after how many points the action should trigger
- Set what percentage of volume should be closed
- Optionally leave a runner with the minimum possible lot
This gives the trader another layer of automation beyond normal TP execution.
Debug and testing improvements
Because this version is intended for more complex custom workflows, Telegram Coppy Custom also includes a dedicated testing and validation layer.
- Verbose logs for testing
- Additional internal state tracking for TP levels and signal lifecycle
- More convenient scenario validation in backtesting and live checks
- Special timeout override for faster testing instead of waiting for the real FXGDP deadline
Why choose Telegram Coppy Custom instead of TG Coppy 1.57?
- The regular version is focused on copying and standard trade handling
- The Custom version adds a full post-entry management framework
- It is better for traders who want trade lifecycle automation, not only signal entry
- It is suitable for channels where the trade idea must be managed in stages
- It is useful when late entries must be blocked and reused signals must be controlled
- It is better for advanced testing and custom strategy replication
Who is this version for?
- Traders who want more than the standard TG Coppy 1.57 workflow
- Users who need milestone-based SL management
- Traders using FXGDP-style time-based trade logic
- Users who want trigger-based trailing with multiple levels
- Anyone who wants more precise control over trade behavior after entry
System recommendations
For best performance, it is recommended to run Telegram Coppy Custom for MT5 on a Windows VPS so the bridge application and MetaTrader 5 terminal can stay online continuously. A home Windows PC can also be used, but it must remain powered on and connected to the internet at all times.
If you use macOS, the recommended solution is a Windows VPS, because the bridge application is intended for Windows environment.
Important notes
- Run the bridge EXE as administrator
- If Telegram is blocked in your country, use a VPN on the full PC or VPS
- Make sure auto trading is enabled in MetaTrader 5
- Configure the management logic carefully before live use
- Backtest and test settings before applying them to a real account
Final overview
Telegram Coppy Custom for MT5 is not just another Telegram copier. Compared with the regular TG Coppy 1.57, this Custom version adds a new advanced management layer with milestone TP logic, FXGDP-style timeout actions, TP1-based entry protection, 10-level custom trigger trailing, custom break-even control, and independent profit automation tools. For traders who want deeper control over how copied signals are managed after entry, this version offers a much more advanced and strategy-oriented solution.
