• Übersicht
  • Bewertungen (21)
  • Diskussion (228)
  • Neue Funktionen

Fast Copy MT4

The program allows to copy trades between different MetaTrader 5 and MetaTrader 4 accounts in any direction and amount quickly and easily.

Any type of copying is available

  • MT4 → MT5
  • MT4 → MT4
  • MT5 → MT5
  • MT5 → MT4

* full description

How the program works

The program copies transactions between two or more terminals installed on one "PC" or "VPS". You need to install the program in the "MASTER" mode on one terminal, it can be a terminal with a trading password or an investor password, you need to install the program in the "SLAVE" mode on another terminal and select the account number from which transactions will be copied in a special window. It is necessary to start the program once for one account - the program will automatically recognize and copy all transactions for all selected currency pairs. Be careful, for MT4 and MT5 different versions of the program are needed.

MetaTrader 4Fast Copy MT4

MetaTrader 5 Fast Copy MT5

* Before buying, you can test the program in any mode and for your tasks by downloading free demo versions — Fast Copy MT4 demo / Fast Copy MT5 demo

Main features

  • One tool for sending and receiving transactions: [master] or [slave] operation mode can be selected in the program
  • One provider [master] can copy trades to multiple receiver [slave] accounts
  • One receiver [slave] can copy trades from multiple provider [master] accounts
  • Absolutely compatible between MetaTrader 4 ↔ MetaTrader 5 as well as Netting ↔ Hedge order/position accounting systems
  • Copying SL and TP — optional. It is possible to set custom SL and TP levels for trades opened by the program
  • Copying Buy Limit, Sell Limit, Buy Stop and Sell Stop pending orders — optional
  • Receiver's account [slave] can still trade manually or use other EAs without any conflict
  • The ability to copy any characters in any combination. By default, the most suitable pairs will be offered, then you can select any pair
  • Ability to copy trades and orders depending on their Magic Number
  • Restore all settings and status after the terminal closure
  • Easy usage and friendly interface
  • Execution speed

Modes of Work

  1. MASTER — provide deals
  2. SLAVE — receive deals
  3. Reset settings & Clear Data

Attention !!! Below is a short list of program settings - a full description of all functions and settings items will be posted on a separate page a little later

  • Button OFF/ON — turn on/off execution
  • [ Normal | Fast | Extreme ] Copy Speed — select copying speed
  • Slave settings — slave mode settings
    • Select Master — choose the number of the account from which deals will be copied
    • Multiplier — trade volume multiplier
    • Balance — auto calculate ratio of master's and slave's balances
    • Fix. Balance — a fixed balance value of [slave] account
    • Equity — auto calculate ratio of master's and slave's equity
    • Fix. Volume — fixed volume per each trade
    • Deviation — maximum allowable price deviation to copy if a trade is profitable. If the value is negative, copying will be performed at a price more advantageous than the one on the master account
    • Copy BUY — copy "buy" trades from the signal provider
    • Copy SELL — copy "sell" trades from the signal provider
    • Copy SL — copy Stop Loss 
    • Copy TP — copy Take Profit 
    • Buy Limit — copy Buy Limit
    • Sell Limit — copy Sell Limit
    • Buy Stop — copy Buy Stop
    • Sell Stop — copy Sell Stop
    • Save Position Coefficient — save open position ratio. The parameter is used in strategies where the next order should be proportional to the previous one
    • Lock Copy Less Minimum Volume — block the opening of the transaction if, after recalculation and rounding, its volume will be less than the minimum
    • Reopen Closed Deals — allow reopening after the “slave” transaction is closed manually or by other means
    • Reverse copy — SELL ↔ BUY trade reversal mode, SL ↔ TP levels are also reversed in this mode, as well as Buy Limit ↔ Sell Stop and Sell Limit ↔ Buy Stop pending orders
  • Symbols setting — set matching the symbols for copying master and slave accounts
  • ON — enable/disable any symbol at will. All symbols are enabled for copying by default
  • Master Symbol
  • Slave Symbol

#tags copy trade copier copylot copy trades copier kopir fast copier

★★★★★ Rate this product — it will help the author to release updates faster and add new features — all program updates you get for free

Yuriy Pikin
Yuriy Pikin 2019.06.04 15:30 

Разработчик гений! Браво!

dadoneemiliano 2019.05.30 16:35 

i try modified order but get error = 130 what is this ?

Nuzhat Atif
Nuzhat Atif 2019.04.17 17:15 

Initially I was impressed at how easy it was to set this up!

It all worked fine when the markets were calm and quiet. As soon as there is slight volatility in the market, this thing stops working completely! This can be disastrous if you are copying to larger accounts.

orcafm 2019.03.06 18:42 

Excellent software, version 3.7 gives full control. Pavel's updates are always high-level and the technical support is great. highly recommend

mirai326 2019.03.02 05:57 

Der Benutzer hat keinen Kommentar hinterlassen

Shine Scariah
Shine Scariah 2019.02.24 04:33 

Simply Superb.

The author positively understands our requirements and add the new features as quickly in the upcoming revisions. Great personal support always.

Martin Volk
Martin Volk 2019.01.28 19:40 

Works well

Liyan Huang
Liyan Huang 2019.01.04 14:15 

Can you add a replenishment order? That is to replenish slave's own voluntary closing order?

Zhiming Liu
Zhiming Liu 2018.11.28 01:09 

Not working, it keeps showing trade is disabled, when trying to copy the single.

vladmedd 2018.11.18 19:38 

Der Benutzer hat keinen Kommentar hinterlassen

FXAdvanced 2018.09.27 16:32 

works great so far, easy to use interface.

Carl Gustav Ekstroem
Carl Gustav Ekstroem 2018.06.22 17:05 

Der Benutzer hat keinen Kommentar hinterlassen

Marcin Pakulski
Marcin Pakulski 2018.06.10 20:42 

Der Benutzer hat keinen Kommentar hinterlassen

shipyr 2018.05.06 12:37 

This Copier has good background, but it is not ready for professional signals copying from trader to managed accounts, as it lacks for some very necessary features:

1) no possibility to set MAGIC number in Slave mode (-> to track deals from different sources),

2) no possibility to block new deals opening in case of low free margin (-> to prevent margin calls),

3) no possibility to set multiplication coefficients based on symbols (-> to copy between brokers with different symbols specifications).

When each of these 3 major drawbacks will be eliminated in future releases, I will increase my mark accordingly.

Valter Oliveira
Valter Oliveira 2018.03.18 23:54 

It works very well. Thanks

Emmanuel Santana
Emmanuel Santana 2018.01.10 20:27   

Hi good day.

With the new update of MT4 and MT5 of version 2.7 of its software, the Master in MT5 does remain ON, but in MT4 it does not show me the master and I can not do the copying, help!

Sairoong Kidtook
Sairoong Kidtook 2017.11.15 14:51 

I tested it today and very very amazing product, real fast :-)

just sad i ask info seller for product but never answer.

Gorkoo 2017.07.13 15:42 

Works fine

Giorgio Monteleone
Giorgio Monteleone 2017.06.21 10:37 

Very good utility! Thank you

Aleksandr Romazanov
Aleksandr Romazanov 2017.06.06 11:13 

Отличный копировщик, очень доволен! Очень удобно, а главное просто. Спасибо разработчику, за его работу. Рекомендую!!!

С прибыли, планирую купить и версию в МТ5.

Robert Jagger
Robert Jagger 2017.04.05 21:46   

I am very happy that I bought this product.

I chose it because I need to copy trades from my MT4 accounts to MT5 ... a piece of cake with this!

(Note: you do need to purchase both Fast Copy MT4 and Fast Copy MT5 to do this).

I have used other trade copiers, and this is by far the easiest to set up and use.

Lastly (because I am a geek at heart) I love the flickering green icon that lets you know its working!

Version 3.9 2019.05.21
Added option "Equity"
Option "Round Off" is replaced by a clear "Fix.Balance"
Added check type "pending order"
Updated filtering by "magic" number
Version 3.8 2019.04.16
Updated copy security settings for latest terminal versions
Version 3.5 2019.02.23
Added the ability to optionally disable copying transactions below the minimum volume
Added the ability to reopen trades closed manually or by other means
Made changes on the results of testing
Version 3.4 2019.02.16
Added percentage indicator of the program
Updated copy mode for pending orders
Changed the names of the menu items "Copy Speed"
Cumulative updates of functions and algorithms of the program
Version 3.3 2018.06.25
Significantly reduced the load on terminals when working with a large number of symbols
Leave only the necessary symbols in the "Market Watch", fewer symbols = more speed
Version 3.2 2018.03.21
Updated the logic for copying Pending Orders
Version 3.1 2018.03.08
Code optimization
Version 3.0 2018.03.01
• Added arbitrary selection of copied symbol names — "AnyThing" can be copied "AnyWhere"
• Added copying pending orders
• Added copying by a fixed volume
• Added ability to copy trades and orders depending on their magic number
• Revised the interaction and execution algorithms
• Revised the security group
• Revised the graphical interface
Version 2.8 2018.01.22
Menu updated
Version 2.7 2018.01.09
Improved the algorithm of the program
• Increased the operation speed in all modes
• Reduced the CPU load in all modes
Version 2.6 2017.07.07
Added selection of the operation mode:
• Low consumption of the PC resources
• Balanced mode
• High copying speed

Added automatic recognition:

Added trade reversal mode - "Reverse copy"
SL ←→ TP
Version 2.5 2017.06.06
Optimization of work algorithms
Increases efficiency by 20%
Version 2.4 2017.05.24
Code optimization
Version 2.3 2017.05.17
The visual menu now looks more compact.
Added the possibility to choose copying of BUY/SELL.
Added a new mode allowing to reduce load on the PC.
Fixed errors reported by some users.
Added security checks.
Version 2.2 2017.02.13
The program can now work at certain brokers.
Added configuration checks before starting the operation
Small improvements and code optimization
Version 2.1 2017.01.27
The menu has been completely redesigned
Added ability to copy SL and TP levels
Added ability to save position ratio
Added partial copying option - only selected symbols