• Información general
  • Comentarios (31)
  • Discusión (656)
  • Novedades


The utility copies trades from the signal provider accounts (master accounts, one or multiple providers) to unlimited number of receiver accounts (slave accounts). The provider is defined by the 'provider' parameter (any combination of numbers and letters). For example, there are two providers. Run the utility in master mode on them, and set different values to the provider parameter. On the account designated for copying these signals, run two utilities in slave mode in different windows, setting the 'provider' of the first provider to one of them, and 'provider' of the second provider to the other one.

The copying can be set in the opposite direction (reversed), and also with a size (greater or less) changed by the multiplier.

The utility monitors the changes in the stop loss and take profit orders of the positions copied from a master account. All the working parameters of the utility are displayed on the screen for clarity.

The utility does not interfere with the positions on the slave accounts opened manually or automatically by other experts/utilities.

To avoid premature closure of positions of a slave account due to the spread difference with the master account, it is possible to disable copying the stop loss and take profit orders by setting the corresponding parameters to 'off'.

The utility is able to copy the trades on instruments that have prefixes/suffixes. To do that, specify them in the 'prefix' and 'suffix' parameters. In case the master and slave accounts have the same prefixes and suffixes, these parameters can be left blank.

Note! In slave mode, the copier applies the comment field to identify copied trades. Therefore, this field should not be changed by the trading server when opening traedes.  Also, you need to use identifiers (Provider number) of the same length if you use several master copiers. For example. 1, 2, 3 or 11, 13, 22.

The utility works by timer with a second delay. If failed to set the timer (for example, during the server re-load), the utility is switched to the tick mode informing of this in a comment on a symbol chart.

Parameters of the utility specified both in master and in slave modes

  • Copier mode – operation mode of the utility: master (signal provider) or slave (signal receiver)/slave2 (manual closure of orders).
  • Provider number – unique identifier of the signal provider to copy trades from (any string value consisting of numbers and letters).
  • Prefix – set the prefix of the traded instrument (if any).
  • Suffix – set the suffix of the traded instrument (if any).

Parameters of the utility specified onlyin slave mode

  • Slave number – number of the copier. Set when copying from one account to several accounts.
  • Copy with reversal – copy trades in the opposite direction (reverse): on (enabled) or off (disabled).
  • Copy stop loss – copy the stop loss of the trade from the master account: on (copy) or off (do not copy).
  • Copy take profit – copy the take profit of the trade from the master account: on (copy) or off (do not copy).
  • Slippage & Price difference (in pips) – allowed slippage (in points) and allowed price deviation.
  • Do not copy if spread - disable copying if a spread exceeds a specified value.
  • Multiply lot of copied deals by – multiplier of the copied position.
  • Show last events - inform of the last copier actions.

Parameters of the utility specified onlyin master mode

  • Do not copy deals with magic (space separated) – disable copying trades having magic numbers specified here (space separated).

eliasazar 2019.11.15 02:40 

Excellent trading utility ,thank you Vladimir.

Mehdi Faraz Fard
Mehdi Faraz Fard 2019.11.03 17:02 

El usuario no ha dejado ningún comentario para su valoración

nisheiru 2019.10.27 06:01 

Excellent product! Easy to use and works like a charm.

Tony 2019.09.08 16:05 

Thank you for your work. I am testing the application and it seems wonderful.

sunnychow 2019.08.31 15:33 

Thanks for share

Yongqiang Chao
Yongqiang Chao 2019.08.22 10:19 

You are the best! Thank you for your generosity! Thank you for your free.

Olena Mykhailovska
Olena Mykhailovska 2019.08.12 18:35 


ninja_salaiyang 2019.07.23 11:41 

really good

Spectron 2019.07.19 11:11 

Awesome, fast, simple and reliable

Dr. Sajwani
Dr. Sajwani 2019.07.10 14:54 

El usuario no ha dejado ningún comentario para su valoración

Quang Mai Van
Quang Mai Van 2019.05.02 11:56 

Need faster

Catalin Zachiu
Catalin Zachiu 2019.04.16 05:49 

Works great , thank you .

Vasil Dzhambazov
Vasil Dzhambazov 2019.03.08 14:35 

El usuario no ha dejado ningún comentario para su valoración

Giordan Costa
Giordan Costa 2019.01.11 18:18 

Very useful and free,Thanks

Paul9 2019.01.03 15:15 

Excellent utility

AirOne1 2018.10.07 05:57 

useful product thanks

MARCOFRANCA 2018.08.28 16:09 

Very good!

Matthew Todorovski
Matthew Todorovski 2018.06.12 15:21 

El usuario no ha dejado ningún comentario para su valoración

enzo pellitteri
enzo pellitteri 2018.05.04 11:50 


Chayapakorn Surangkul
Chayapakorn Surangkul 2018.05.03 10:13 

El usuario no ha dejado ningún comentario para su valoración

Dmitry Olyushin
Dmitry Olyushin 2017.12.29 17:44 

Все работает без лишних хлопот супер

Abdullah Alrai
Abdullah Alrai 2017.11.12 20:33 

Great Work Friend i hope you make same for mt5 then we will be available to use it copying between mt4 to mt5

Aleksandr Tamonin
Aleksandr Tamonin 2017.10.23 19:06 

Спасибо! Отличный копировщик!

Ali irwan
Ali irwan 2017.07.23 13:00 

El usuario no ha dejado ningún comentario para su valoración

Michael 2017.07.22 09:00 

Very easy to set up and get running and increase the lot size of the signal im using. Great work.

Aldo Doberti
Aldo Doberti 2017.05.12 19:15 

Fantastic Sir Thx

Yuan Zhao Ng
Yuan Zhao Ng 2017.03.08 10:22   

there is a lag of 3 to 4 seconds before the trades are copied from master to slave accounts.. why is this happening?

Chris Mechen
Chris Mechen 2017.03.04 08:47 

Very good easy to use!Very quick and quick response from author!

Gennadiy Voltornist
Gennadiy Voltornist 2017.01.03 15:43 

отличный бесплатный копировщик

Dmitriy Falkov
Dmitriy Falkov 2016.11.07 14:47 

Very good solution if your broker doesn't support signals.

Mujeeb Abdul
Mujeeb Abdul 2015.05.26 19:50 


Versión 6.1 2018.02.26
1. Data on the copier actions on a recipient (slave) account is displayed on the screen. The data is used to control its actions.
2. If the copier cannot be launched based on the timer, it works based on new ticks.
3. The copier uses the comment field of copied trades to identify them. If a broker adds an additional info to the comment, the copying was disrupted. This has now been fixed.
4. The utility copies trades on gold and silver even if their names are different: XAUUSD=GOLD and XAGUSD=SILVER.
Versión 3.8 2017.10.13
1. Changed the description of the parameters.
2. Prohibition of copying orders by magic number can be set by a list.
3. Added the Slave number parameter. Used when copying from one account to several accounts.
Versión 3.7 2015.12.03
Full renovation (see description).
Versión 3.1 2015.08.27
1. Trades are copied faster.
2. The utility's parameters can only be changed by pressing the F7 button.
3. It works with symbols having prefixes and suffixes. If instruments have same prefixes and suffixes on Master and Slave accounts, there is no need to set them in prefix and suffix parameters of the utility.
4. Added the ability to skip copying of specified instruments. The list can be set in the no_trade_list parameter where you specify blank separated instruments in the Slave mode only. At that you need to specify prefixes and suffixes if any.
Versión 2.0 2015.08.03
1. The Slave (signal copying) mode was optimized.
2. Copying signals of numerous providers is available. To select the signal provider set appropriate provider parameter (any combinations of letters and numbers). For instance, you have two providers. Run this utility as a Master on both accounts, set different value to the provider parameter. Then on a receiver account run two utilities as a Slave in different terminal's windows. For one Slave set first provider, for another set the other provider.
3. Now you can cancel copying a stop loss order (copy sl - parameter, "on" or "off") in order to eliminate early closing by stop loss if spread is different on Master and Slave accounts.
Versión 1.6 2015.05.08
Now it checks correction of a lot size after multiplication.
Versión 1.5 2015.02.13
Fixed detected errors.
Versión 1.1 2015.01.16
1. The disk is accessed only if there are changes in orders.
2. Fixed errors.