MAGNETIC CURRENT -Swing Trading Strategy

MAGNETIC CURRENT -Swing Trading Strategy

18 November 2026, 22:52
Andres Felipe Carvajal Rodriguez
0
8
MAGNETIC CURRENT

Swing Trading Strategy

Trend, pullback and volume-flow confluence

Analysis and execution system for MetaTrader 5.

1. Strategy Overview

Magnetic Current is a swing trading strategy designed to capture multi-day market movements by combining directional bias, pullbacks, market regime analysis and volume confirmation.

The trading process follows a specific sequence:

  1. Identify the dominant market direction.

  2. Locate a pullback magnet.

  3. Confirm the market regime on H4.

  4. Validate the reversal and volume at the H1 candle close.

  5. Execute the trade with controlled risk and predefined profit targets.

Indicators used:

2. Chart Setup

Timeframe Indicators
D1 HeatMap
H4 HeatMap and Quorum
H1 MarketCrack, HeatMap, Quorum and Smart Volume Flow

MarketCrack is installed only once on the H1 chart. Its panel displays multiple timeframes, including H12, H8, H6, H4 and H1.

Keep all seven default rows enabled. H2 and H3 also contribute to the panel's overall confirmation calculation.

For HeatMap, use HybridMode = true, with the Sniper and Institutional filters disabled. Load a separate instance on D1, H4 and H1.

3. Identifying the Main Market Direction

Market direction is determined using the H12, H8 and H6 rows in MarketCrack.

To validate a buy or sell trade:

  • The panel footer must display CONFIRMED or FULL ALIGN in the direction of the intended trade.

  • At least two of the H12, H8 and H6 rows must agree.

  • None of these three rows may show pressure in the opposite direction.

  • H1 must confirm the same direction.

  • H4 must not show opposing pressure or be in FADE.

The states LOW, FLAT, FADE, STALE or missing data do not count as confirmations.

How to interpret LOW and FADE: These labels do not indicate direction by themselves. Check the row color and the sign of its numerical value (+ or -). On H12, H8 and H6, both LOW and FADE count as opposing pressure when their sign indicates the opposite direction, disqualifying the trade. On H4, any FADE state invalidates the entry.

With the default settings, MarketCrack uses seven rows and requires six votes to display CONFIRMED. H2 and H3 also participate in this calculation. Do not disable any rows, as doing so would change the panel's confirmation criteria.

4. Identifying the Pullback Magnet

HeatMap identifies price zones that the market may revisit before continuing its movement.

  • Green (Upper): the near edge of a gap left by selling activity.

  • Red (Lower): the near edge of a gap left by buying activity.

Only Medium and Strong levels are used. Weak levels are disregarded.

The trade setup follows this logic:

  • Buy: wait for a pullback toward a red magnet and look for a green target above the current price.

  • Sell: wait for a pullback toward a green magnet and look for a red target below the current price.

Profit targets and pullback levels are identified differently:

  • The target must be an active daily level, with another H4 or H1 level in the same zone, within a maximum distance of 0.30 Daily ATR.

  • The pullback magnet can be a Medium or Strong level on H4 or H1. It does not necessarily need to be a daily level.

Timeframe confluence is assessed manually because each HeatMap instance calculates its own levels independently.

When price touches the pullback magnet with its wick, HeatMap marks it as Touched and freezes the line. This does not invalidate the entry: the touch is precisely the pullback being anticipated. Profit targets, however, must remain active and untouched.

5. Confirming the Market Regime on H4

Quorum on H4 is used to verify that the market regime supports the intended trade direction.

  • Buy: Consensus above 50 and Quorum above Consensus.

  • Sell: Consensus below 50 and Quorum below Consensus.

The reading must be taken from the most recently closed H4 candle, not the candle currently forming.

On this timeframe, the objective is to confirm the market regime; a new crossover is not required. Any FADE state on H4 invalidates the entry.

6. Confirming the Entry on H1

The entry is triggered when price reaches the pullback magnet and the required Quorum and Smart Volume Flow confirmations appear.

Quorum confirmation:

  • Buy: the white line (Quorum) closes above the gold line (Consensus), after previously closing below it.

  • Sell: the white line closes below the gold line, after previously closing above it.

The crossover must be confirmed by the closed H1 candle.

Smart Volume Flow confirmation:

One of the following three signals is required:

  • Absorption

  • Directional Rejection

  • Directional Change

For buy trades, the signal must appear above zero. For sell trades, it must appear below zero.

Absorption may appear less frequently because it depends on the terminal having collected the necessary tick data. If this information is unavailable, Volume Rejection may appear instead. This signal is not accepted as an entry confirmation.

The following signals are not used for entry: Continuation Climax, Volume Rejection and Exhaustion.

Execution condition: the pullback magnet touch, Quorum crossover and valid Smart Volume Flow signal must all occur on the same closed H1 candle.

If all three conditions do not appear on that same candle, no trade is executed. If the closing price has already moved beyond the intended Stop Loss level, the order must not be placed either.

7. Setting Profit Targets

Profit targets are identified using active, repeated HeatMap zones located in the direction of the trade.

A repeated level is defined as a zone where levels from different timeframes converge. Levels separated by 0.30 Daily ATR or less are grouped into a single zone rather than treated as separate targets.

  • Buy: TP1 is the first repeated green zone above the current price. TP2 is the next repeated green zone further above.

  • Sell: TP1 is the first repeated red zone below the current price. TP2 is the next repeated red zone further below.

The proposed position management is:

  • Close 50% of the position at TP1.

  • Close the remaining 50% at TP2.

If only one valid zone exists, use a single profit target. Do not invent a second level.

TP1 must offer a minimum risk-to-reward ratio of 1:1.5. Additionally, to preserve the multi-day nature of the strategy, the target must be at least 1 H4 ATR away from the entry price.

8. Stop Loss and Risk Management

  • Maximum risk per trade: 0.5% of account equity.

  • Only one open position per instrument.

  • Place the Stop Loss beyond the opposite side of the pullback magnet, allowing a buffer of 0.30 H1 ATR.

  • Do not widen the Stop Loss to keep a losing trade open.

  • Do not average down or use grid trading.

9. When to Exit Early

A trade may remain open while the MarketCrack panel footer displays:

  • CONFIRMED in the direction of the trade.

  • FULL ALIGN in the direction of the trade.

  • BIAS in the same direction as the trade.

Close the trade when the panel displays:

  • BIAS in the opposite direction.

  • MIXED.

  • FADE.

  • Confirmation of the opposite direction.

The trade must also be closed if:

  • The H1 row switches to FADE.

  • When price reaches the target zone, Smart Volume Flow displays exhaustion on the same side as the trade: above zero for a buy or below zero for a sell.

Exhaustion on the opposite side is not, by itself, considered an exit signal, as it represents weakening pressure from the side opposing the trade.

Time-based exit: If ten daily candles pass without price covering at least half the distance to TP1, and the panel footer no longer displays CONFIRMED or FULL ALIGN, close the trade. This also applies when the panel displays BIAS in the same direction as the trade, but price has not covered half the distance to TP1.

10. Pre-Trade Checklist

Before placing a buy or sell trade:

  • MarketCrack displays CONFIRMED or FULL ALIGN in the intended direction.

  • At least two of H12, H8 and H6 agree, and none shows opposing pressure.

  • H1 confirms the direction, and H4 is neither opposing nor in FADE.

  • HeatMap identifies a Medium or Strong pullback magnet on H4 or H1.

  • An active daily target exists, with H4 or H1 confluence within a maximum distance of 0.30 Daily ATR.

  • Quorum H4 confirms the market regime on the most recently closed candle.

  • Price touches the pullback magnet.

  • Quorum H1 confirms the crossover at candle close.

  • Smart Volume Flow displays a valid signal.

  • All three entry conditions occur on the same closed H1 candle.

  • TP1 offers at least a 1:1.5 risk-to-reward ratio and is at least 1 H4 ATR away.

  • The Stop Loss level has not been breached at candle close.

  • Risk does not exceed 0.5% of account equity.


Fundamental Principle

First identify the current, then wait for the pullback, confirm the market regime, and finally execute the trade.

The strategy does not attempt to anticipate the market. It waits for the indicators to provide the conditions required to trade a directional move with a defined entry point and controlled risk.

Patience is an essential part of the system: if all confirmations do not coincide on the same H1 candle, there is no trade.