CGE Trading Suite

• MetriX
  Your trading desk on the chart. MetriX opens a structured panel for the full calendar month: equity, PnL, and the markets you care about in one place, with a custom watchlist so those pairs stay in front of you. Built-in Session Map and Session Heat show when each desk is live and where D1 capital flow is leaning, with one-click chart switching from the heat chips. A Settings panel applies every change immediately on the chart, no re-attach required.

• Daily Capital Flow Index + Scanner
  The core directional engine. It measures relative currency-basket strength to reveal where the dominant flow is running, so you trade with institutional money instead of against it. The Scanner ranks pairs by day trend and day bias in a live table you can filter and sort from the chart; weekday snapshots refresh capital flow three times — 1 hour before London, 1 hour before New York, and again at the D1 close — so you can read session bias before the open and recalibrate off the completed day.

• Chart Tools
  One panel to command the workspace. Toggle any module ON or OFF directly from the chart, so you build exactly the view a setup needs and strip away everything else.

• Price Label
  A live readout pinned to price: bid, ask, real-time spread, and a countdown to the close of the active bar. A built-in mini Daily Capital Flow Index chart shows the prevailing directional bias, so you read the exact price you are trading and the pressure behind it in one compact panel.

• Smart Grid
  Automatically plots the psychological round numbers where price repeatedly reacts, putting key levels on your chart before the market reaches them.

• Trap Play
  Flags false breakouts in real time: moments where price appears to break out only to reverse sharply. Sidestep the deceptive entry and position around the liquidity-driven reversal instead.

• Knee-Jerk Pattern
  A single-bar trap: price spikes beyond the prior bar's high or low, closes back inside, and the next bar confirms the failure. It is not a trend change, just a choppy-market head-fake. Do not chase the spike; wait for the true move that follows.

• Exhaustion Pattern 9/13
  Tracks momentum exhaustion with a dual-cycle sequential count. A 9-bar impulse marks where trend momentum begins to fade; if pressure persists, a 13-bar cascade confirms full exhaustion, the structural point where buying or selling pressure is spent. Each completed count projects a risk level onto the chart, marking the price that must hold for the signal to remain valid; a break through it invalidates the setup. Use it to find high-probability reversal zones and to avoid entering trends already running on empty.

• Breakout Line Channel
  A cyclical, momentum-based tool that reads the angle of price movement to reveal direction and pressure. Steeper angles signal stronger momentum, letting you spot potential breakouts and breakdowns early.

• Trend Channel
  Draws the pair of parallel trend lines that frame the dominant uptrend or downtrend. It scans back through price history for two major swing highs and two major swing lows, then builds a primary trend line and its matching parallel so the active trading channel is unmistakable.

• MIDAS - Hawkins
  A VWAP-based tool that plots dynamic support and resistance by anchoring volume-weighted price curves to significant market turning points. The Hawkins method anchors directly to highs and lows for precise, actionable levels, while the Top/Bottom Finder weighs cumulative volume against price movement to tell you whether a trend has the fuel to continue, or whether exhaustion and a reversal are approaching.

• #5 Trend Line Rule
  Finds the breakout that actually counts. Markets rarely reverse cleanly: price typically prints five false breakouts before the sixth follows through with real conviction. The suite tracks every trend-line breach automatically, so you always know where you stand in the sequence and avoid being shaken out before the move that matters.

• SMC Playbook
  Maps the institutional trading day directly onto your chart. The Asian range, London Open, New York AM, and London Close kill zones are shaded as the windows where smart-money activity concentrates, with the Asian range projected forward as live liquidity reference lines and the Silver Bullet windows (03:00, 10:00, and 14:00 New York) marked for high-probability setups. A corner session clock tracks live New York time, highlights the active kill zone, and counts down to the next session, and to the reopen whenever the market is closed. Timezone and US daylight-saving shifts are handled automatically, so every session aligns precisely with New York regardless of your broker.

• Order Blocks
  Automatically maps supply and demand zones anchored to confirmed swing pivots. A strict impulse filter admits only zones with a genuine institutional footprint: price must leave the base with real conviction. Fresh, untested zones are distinguished from levels already revisited, and broken zones are cleared automatically, so your chart only ever shows the areas where the market is most likely to react.

• Market Structure
  Reads trend the way an institutional desk does, as a sequence of swing points and the breaks between them. Every confirmed pivot is labelled HH, HL, LH or LL and colour-coded by direction, so the character of the trend is legible at a glance. Each break of a protected level is then classified: a break in the direction of the trend is a Break of Structure and confirms it, while a break against the trend is a Change of Character and flips the bias. Live rays project the current protected high and low forward, marking the exact prices that will trigger the next event before it happens. Hover either one and the card tells you what a break there would do to your bias. Structure is confirmed on closed bars only, so nothing repaints and no signal is withdrawn after you have acted on it. The module reads from the same swing engine as Order Blocks, so structure and zones are always derived from identical pivots.

• Legs
  Maps the impulse and correction legs that make up the trend, so you see how far a move has already travelled and where the next swing is likely to form. Each leg is drawn from tip to origin on a Wick or Close basis you choose in Settings, with an optional V-shape filter that keeps only clean, tradable swings and drops the noise. Breaks of structure along the path are marked when enabled, and everything confirms on closed bars, so the picture you act on does not repaint. Use it beside Market Structure and Order Blocks when you need the path of the move, not only the pivots.

• Bifurcation
  Marks the bar where a market stops behaving the way it has been. Character rarely changes gradually: price holds its state, becomes less able to absorb disturbance, then resolves quickly one way or the other. Bifurcation marks that moment and draws both paths, because the loss of stability does not decide which one is taken. A close through the upper curve resolves it upward, the lower one downward, and a mark reaching neither simply came to nothing. Infrequent by design and confirmed on closed bars only, so nothing repaints.

• Volume Profile
  Reveals where the market actually did business. Every other volume tool measures activity against time. Volume Profile measures it against price, distributing traded volume across each level to show where value was accepted and where it was rejected. The Point of Control marks the price with the heaviest participation, and the value area bounds the 70% of volume around it, separating the prices the market agreed on from the ones it merely visited. Naked POCs, prior sessions' control prices that have never been traded back through, are tracked automatically and cleared the moment price returns, marking the unfinished auctions that so often act as a draw on liquidity. The profile period scales with your chart automatically, from daily sessions on intraday timeframes through weekly, monthly and yearly profiles above, and samples from its own source timeframe so resolution stays high whether you are on M1 or MN1. Volume source is detected automatically, using real exchange volume where the broker reports it and tick volume elsewhere, with the active source shown on the hover card.

• Arrays
  A timing tool rooted in Pi-cycle theory that pinpoints high-energy turning-point windows in time. Blue bars signal low energy and normal conditions; gold bars indicate converging cycles and expanding volatility; orange bars, the core signal, mark windows where a trend change is probable; crimson bars flag extreme convergence, where the sharpest reversals, capitulation lows, and blow-off tops tend to cluster. Read them as a sequence: a clean build from blue to crimson and back is the highest-quality signal the system produces.

• ECM & Pi Cycles
  Plots long-term ECM and π-based timing cycles directly on the chart as vertical markers. These cycles have historically coincided with major market turning points, giving you a macro timing backdrop to confirm whether your short-term signals align with a larger cyclical move.

• Economic Events
  A full economic calendar built directly into your charts. High-impact releases are plotted as vertical markers; hover any marker for the event name and live countdown, without leaving your workflow. Anticipate volatility, stay out during risky windows, or position ahead of the announcements that move markets.

• Live News Ticker
  A scrolling breaking-news strip pinned along the bottom of your chart, streaming market-moving headlines in real time so you never miss a release while you stay focused on price. Headlines refresh continuously, newest first, and hovering any headline expands the full story for instant context, with no second screen and no switching tabs. Where the Economic Events calendar covers the scheduled releases, the ticker captures the unscheduled flow: central-bank remarks, geopolitical headlines, and surprise data, giving you both sides of the news picture. The ticker is powered by the CGE News Bridge, which streams live InvestingLive.com headlines into the suite.

• CGE Trade Desk
  The execution layer of the suite. Drag entry, stop-loss and take-profit lines directly on the chart, and the desk calculates the exact position size from your risk, sets the expiry and places the order. A built-in prop-firm protection layer enforces daily loss limits and profit targets, with an automatic daily lockout. It shares the suite's theme and attaches beneath Chart Tools automatically, so analysis and execution work as one.

Support & Communication
Developer support is available through the MQL5 messaging system, with most inquiries answered within 24 hours.