Nexora Prime
- Uzmanlar
-
Emmanuel Chinedu Ifechukwu
Developer/ Circuit Technician - Sürüm: 10.20
- Güncellendi: 19 Ekim 2026
- Etkinleştirmeler: 5
ALL INPUT SETTINGS — SOURCE DEFAULTS AND PLAIN-LANGUAGE EXPLANATIONS
Each item below shows the exact input name so you can find it in MetaTrader 5, its default value from the supplied source, and what it means.
LOT SIZE & ACCOUNT SIZING
Use fixed lot size — InpUseFixedLot (default: On (true))
Choose whether every new trade uses the same lot size or whether the EA calculates the lot size from the risk percentage and stop-loss distance.
Fixed lot size — InpFixedLotSize (default: 0.01)
The lot size used when fixed-lot mode is on. A smaller number generally means a smaller trade. The broker's minimum and step rules still apply.
Risk per trade (%) — InpRiskPct (default: 1.0)
When fixed-lot mode is off, this is the approximate percentage of account balance the EA aims to risk on one trade if the stop loss is reached. It is not a promise of the exact final loss.
Maximum daily loss (%) — InpMaxDailyLossPct (default: 10.0)
Stops new trading when the EA's daily loss limit is reached, measured against the account balance at the start of the day. Check the EA's actual handling of open positions before relying on it as an account-wide guarantee.
TARGET TP DISTANCES & SCALING
Use shared TP targets — InpOverrideEngineTP (default: Off (false))
Turn this on to use the shared take-profit distances below instead of each strategy's own target settings.
TP1 risk multiple — InpTP1_RR (default: 1.0)
The first target distance, measured in multiples of the original distance between entry and stop loss. At 1.0, the target is one initial risk-distance away.
TP2 risk multiple — InpTP2_RR (default: 1.8)
The second target distance in multiples of the initial stop-loss distance.
TP3 risk multiple — InpTP3_RR (default: 3.0)
The third target distance in multiples of the initial stop-loss distance.
Close at TP1 (%) — InpTP1_ClosePct (default: 50.0)
The percentage of the open position the EA attempts to close at the first target.
Close at TP2 (%) — InpTP2_ClosePct (default: 25.0)
The percentage of the open position the EA attempts to close at the second target.
TRAILING STOP CONTROLS
Enable trailing stop — InpEnableTrailingStop (default: On (true))
Allows the EA to move the stop loss as price moves favourably, aiming to protect some gains. It can also close a trade after a pullback.
Trailing step (points) — InpTrailingStepPoints (default: 150.0)
The price movement, in broker points, used for the trailing-stop step. A point is the smallest quoted price increment used by the symbol; its money/price value varies by instrument and broker.
Continue beyond TP3 — InpEnableTP3Runner (default: On (true))
Allows a trade to continue beyond the third target under the EA's runner rules, using a trailing stop instead of treating TP3 as the final close target.
MACRO DXY & NEWS FILTERS
Use US dollar index filter — InpEnableDXYFilter (default: Off (false))
When enabled, uses the configured US dollar index symbol and timeframe as an extra market-direction filter. It is off by default.
US dollar index symbol — InpDXY_Symbol (default: "USDX")
The exact symbol name your broker uses for the US dollar index. Brokers may use different names or suffixes.
US dollar index timeframe — InpDXYMacroTF (default: 4 hours)
The chart period used to assess the US dollar index. H4 means each candle represents four hours.
Volume-profile timeframe — InpVolumeProfileTF (default: 1 hour)
The chart period used for volume-profile-related analysis.
Use news filter — InpEnableNewsFilter (default: Off (false))
When enabled, the EA checks the MetaTrader economic calendar and can avoid trading around listed news events.
News blackout (minutes) — InpNewsBlackoutMin (default: 30)
How many minutes before and after a relevant news event the EA should avoid new trades when the news filter is on.
STRATEGY ANALYSIS
Use ADX evidence — InpEnableADX (default: Off (false))
Allows ADX to contribute extra evidence to analysis. It is off by default; it is not a standalone instruction to buy or sell.
LOSS-STREAK PRECISION GUARD
Loss-streak protection — InpEnableLossStreakGuard (default: On (true))
Turns on a safety rule that becomes more selective after a run of losing trades.
Losses before protection — InpLossStreakThreshold (default: 2)
How many consecutive losing trades trigger the loss-streak guard.
Protection duration (hours) — InpLossStreakExpiryHours (default: 4)
How long the loss-streak restriction lasts before it expires.
Required confidence after losses — InpLossStreakMinConfidence (default: 0.80)
The minimum confidence required while the loss-streak guard is active. Higher values make the EA more selective after losses.
ENGINE MINIMUM CONFIDENCE THRESHOLDS
Trending minimum confidence — InpTrendingMinConfidence (default: 0.60)
The minimum confidence score required for a Trending-engine candidate to be considered.
Ranging minimum confidence — InpRangingMinConfidence (default: 0.60)
The minimum confidence score required for a Ranging-engine candidate to be considered.
Correction minimum confidence — InpCorrectionMinConfidence (default: 0.80)
The minimum confidence score required for a Correction-engine candidate. The default is stricter than the other engine thresholds.
Scalp minimum confidence — InpScalpMinConfidence (default: 0.65)
The minimum confidence score required for a Scalp-engine candidate.
347-ITEM ANALYSIS DETECTION
Enable shared analysis — InpEnable347AnalysisDetection (default: On (true))
Enables the shared analysis layer used by regime classification and the Scalp engine. Turning it off can remove analysis those paths depend on.
Analysis refresh (seconds) — Inp347AnalysisRefreshSeconds (default: 60)
How many seconds may pass before the shared analysis results are recalculated. This is a refresh interval, not a candle period.
DATA AVAILABILITY SAFETY
Block if US dollar index data missing — InpBlockOnMissingDXYData (default: On (true))
If the DXY filter is enabled but its data cannot be read, this setting decides whether affected trades are blocked for safety.
Block if news data missing — InpBlockOnMissingNewsData (default: On (true))
If the news filter is enabled but calendar data is unavailable, this setting decides whether new trades are blocked for safety.
SMC CONFLUENCE
Synthetic Fibonacci zone evidence — InpEnableFibonacciOTE (default: On (true))
For synthetic instruments only, lets Fibonacci retracement-zone evidence add support to a setup score. It does not guarantee a trade.
Synthetic candle-pattern evidence — InpEnablePADetection (default: On (true))
For synthetic instruments only, allows pin-bar and engulfing-candle evidence to support a setup.
Synthetic divergence evidence — InpEnableDivergenceDetection (default: On (true))
For synthetic instruments only, allows RSI/MACD divergence evidence to support a setup.
Synthetic pressure estimate — InpEnableCVDDelta (default: On (true))
For synthetic instruments only, enables a candle/tick-volume-based estimate of buying-versus-selling pressure. It is an estimate, not exchange bid/ask volume delta.
Synthetic chart-pattern evidence — InpEnableChartPatterns (default: On (true))
For synthetic instruments only, allows patterns such as double tops, double bottoms and flags to add supporting evidence.
ICT TOOLS (RESTORED FOR ANALYSIS COMPARISON)
Use ICT-style pattern checks — InpEnableICTModels (default: On (true))
Enables the EA's ICT-style market-pattern checks where they are used in analysis. A detected pattern is not a guarantee of a trade.
Use related-market SMT comparison — InpEnableICTSMT (default: On (true))
Enables comparison of related instruments for SMT divergence. This requires the peer symbols and their price data to be available.
SMT comparison symbol 1 — InpICTSMTSymbol1 (default: "XAUUSD")
First instrument used for the SMT comparison. Change it to the exact symbol name supplied by your broker if necessary.
SMT comparison symbol 2 — InpICTSMTSymbol2 (default: "XAGUSD")
Second instrument used for the SMT comparison. Change it to the exact symbol name supplied by your broker if necessary.
SMT comparison symbol 3 — InpICTSMTSymbol3 (default: "USOIL")
Third instrument used for the SMT comparison. Change it to the exact symbol name supplied by your broker if necessary.
SMT comparison symbol 4 — InpICTSMTSymbol4 (default: "BTCUSD")
Fourth instrument used for the SMT comparison. Change it to the exact symbol name supplied by your broker if necessary.
Silver Bullet window 1 start hour — InpICTSilverBulletStart1 (default: 3)
Start hour for the first Silver Bullet time window, using the EA's broker/server clock. Verify the clock before changing it.
Silver Bullet window 1 end hour — InpICTSilverBulletEnd1 (default: 4)
End hour for the first Silver Bullet time window, using the EA's broker/server clock.
Silver Bullet window 2 start hour — InpICTSilverBulletStart2 (default: 10)
Start hour for the second Silver Bullet time window, using the EA's broker/server clock.
Silver Bullet window 2 end hour — InpICTSilverBulletEnd2 (default: 11)
End hour for the second Silver Bullet time window, using the EA's broker/server clock.
Silver Bullet window 3 start hour — InpICTSilverBulletStart3 (default: 14)
Start hour for the third Silver Bullet time window, using the EA's broker/server clock.
Silver Bullet window 3 end hour — InpICTSilverBulletEnd3 (default: 15)
End hour for the third Silver Bullet time window, using the EA's broker/server clock.
SYNTHETIC INSTRUMENT CONTROLS
Detect synthetic instruments — InpAutoDetectSynthetic (default: On (true))
Allows the EA to recognise supported synthetic-index symbol names and send them to the separate synthetic strategy.
Enable synthetic strategy — InpEnableSyntheticEngine (default: On (true))
Turns the synthetic-specific strategy on or off. Keep this enabled if you want the EA to trade supported synthetic indices.
Use optional M15 confirmation — InpSyntheticM15Confluence (default: Off (false))
Adds optional 15-minute confirmation to synthetic setup scoring. It is off by default, so M15 confirmation is not required by this switch.
Allow synthetic Limit orders — InpSyntheticPendingOrders (default: On (true))
Allows the synthetic strategy to place eligible Buy Limit and Sell Limit orders near pullback areas.
Allow synthetic Stop orders — InpSyntheticStopOrders (default: On (true))
Allows the synthetic strategy to place eligible Buy Stop and Sell Stop orders around confirmed breakouts.
Require M5 liquidity sweep — InpSyntheticRequireSweep (default: Off (false))
When on, requires a confirmed M5 liquidity sweep. When off, the setup may qualify through a sweep or a valid structure break, subject to the other rules.
Show synthetic diagnostic messages — InpSyntheticDiagnostics (default: Off (false))
Writes additional information about synthetic setup checks to the log. Usually leave off unless troubleshooting.
Enable synthetic spike waiting period — InpSyntheticSpikeCooldown (default: Off (false))
Turns on a waiting period after an unusually large synthetic price move. It is off by default.
Synthetic spike size (ATR multiple) — InpSyntheticSpikeATR (default: 3.0)
Defines how large an M5 candle must be, relative to ATR, to count as an abnormal spike when the synthetic spike protection is enabled.
Synthetic spike wait (M5 bars) — InpSyntheticSpikeCooldownBars (default: 2)
Number of M5 candles to wait after a detected synthetic spike when that protection is enabled.
Synthetic maximum spread (points) — InpSyntheticMaxSpreadPoints (default: 2000.0)
Maximum allowed spread for synthetic entries, measured in broker points. The practical meaning of a point depends on the symbol's quote format.
Synthetic spread relative to ATR — InpSyntheticMaxSpreadATR (default: 0.35)
Also limits spread relative to M5 ATR. A value of 0 disables this relative-spread check; otherwise smaller values are stricter.
Cancel invalid synthetic pending orders — InpSyntheticPendingInvalidation (default: On (true))
Allows the EA to cancel synthetic pending orders when their setup becomes stale or price invalidates the planned entry.
Synthetic pending lifetime (M5 bars) — InpSyntheticPendingMaxBars (default: 6)
Maximum number of M5 candles a synthetic pending order should remain valid before the EA expires it under this rule.
Synthetic pending invalidation distance (ATR) — InpSyntheticPendingInvalidationATR (default: 3.50)
How far price may move against a pending setup, measured in multiples of M5 ATR, before the order is considered invalid.
SYNTHETIC FAMILY TUNING
Boom stop distance (ATR multiple) — InpSyntheticStopBoom (default: 1.35)
Stop-loss distance multiplier for Boom-family synthetic instruments, based on ATR. Larger values generally place the stop farther away.
Crash stop distance (ATR multiple) — InpSyntheticStopCrash (default: 1.35)
Stop-loss distance multiplier for Crash-family synthetic instruments, based on ATR.
Volatility stop distance (ATR multiple) — InpSyntheticStopVol (default: 1.15)
Stop-loss distance multiplier for Volatility-family synthetic instruments, based on ATR.
Step stop distance (ATR multiple) — InpSyntheticStopStep (default: 1.15)
Stop-loss distance multiplier for Step-family synthetic instruments, based on ATR.
Other synthetic stop distance (ATR multiple) — InpSyntheticStopOther (default: 1.15)
Stop-loss distance multiplier for synthetic families not covered by the named groups, based on ATR.
Boom minimum candle strength (ATR) — InpSyntheticDispBoom (default: 0.70)
Minimum candle-body strength relative to ATR required by the Boom setup rules. Higher values require stronger movement.
Crash minimum candle strength (ATR) — InpSyntheticDispCrash (default: 0.70)
Minimum candle-body strength relative to ATR required by the Crash setup rules.
Volatility minimum candle strength (ATR) — InpSyntheticDispVol (default: 0.55)
Minimum candle-body strength relative to ATR required by the Volatility setup rules.
Step minimum candle strength (ATR) — InpSyntheticDispStep (default: 0.55)
Minimum candle-body strength relative to ATR required by the Step setup rules.
Other synthetic minimum candle strength (ATR) — InpSyntheticDispOther (default: 0.55)
Minimum candle-body strength relative to ATR required for other supported synthetic families.
POST-CLOSE RE-ENTRY COOLDOWN
Wait after a trade closes (seconds) — InpPostTradeCloseCooldownSeconds (default: 300)
How long to block new entries on a symbol after a partial or full position close. Zero disables the waiting period. The default is 300 seconds (5 minutes).
TRADE & EXPOSURE LIMITS
Maximum trades per symbol — InpMaxSymbolTrades (default: 1)
Maximum number of this EA's concurrent trades allowed for one symbol, subject to the EA's trade-counting rules.
Maximum trades across symbols — InpMaxTotalTrades (default: 3)
Maximum number of this EA's concurrent trades allowed across symbols, subject to its shared ownership/magic-number rules.
PENDING ORDER EXPIRY
Expire pending orders — InpUsePendingExpiry (default: On (true))
Enables automatic expiry for pending orders placed by the EA.
Pending expiry hours — InpPendingExpiryHours (default: 0)
Whole hours in the pending-order expiry duration.
Additional pending expiry minutes — InpPendingExpiryMinutes (default: 45)
Additional minutes added to the hours above. For example, 0 hours and 45 minutes means 45 minutes.
EMERGENCY EQUITY FLOOR
Enable minimum-equity protection — InpEnableEquityFloor (default: Off (false))
Enables a safety floor that blocks trading when account equity falls below the chosen amount. Off by default.
Minimum equity amount — InpMinEquityThreshold (default: 9000.0)
The equity amount below which the equity-floor protection applies when enabled. Use the account's deposit currency.
EXECUTION SAFETY
Maximum entry price movement (points) — InpMaxEntryDriftPoints (default: 40.0)
Maximum allowed difference between the planned signal price and the price at submission, in broker points. Larger movement can cause the entry to be rejected.
Maximum market-order deviation (points) — InpMaxSlippagePoints (default: 40.0)
Maximum permitted execution deviation for market orders, in broker points. The broker can still reject or fill differently according to its rules.
NOTIFICATIONS & DISPLAY
Show on-chart information panel — InpShowHUDDashboard (default: On (true))
Shows or hides the on-chart information panel.
Send mobile notifications — InpSendPushAlerts (default: Off (false))
Allows alerts to be sent to the MT5 mobile app, if push notifications are configured in MetaTrader.
Send email notifications — InpSendEmailAlerts (default: Off (false))
Allows alerts to be sent by email, if email settings are configured in MetaTrader.
Show detailed log messages — InpVerboseLogging (default: Off (false))
Writes more detailed messages to the Experts/Journal logs. Leave off for quieter logs unless investigating a problem.
Show test diagnostics — InpTesterDiagnostics (default: Off (false))
Shows additional diagnostic messages during Strategy Tester runs.
EXECUTION & PROTECTION
Maximum allowed spread (points) — InpMaxSpreadPoints (default: 2000.0)
Maximum spread allowed for regular entry paths, measured in broker points. The synthetic strategy also has its own spread limits.
EA trade identifier — InpMagicNumber (default: 888111)
The identifier used to distinguish this EA's trades from trades placed manually or by other EAs. Use a consistent, unique value for this EA setup.
SPIKE DETECTOR
Enable spike protection — InpEnableSpikeDetector (default: Off (false))
Master switch for the spike guard used by Scalp and the main Trend/Range/Correction engines. Off means this additional guard is not applied.
Scalp spike-check timeframe — InpScalpSpikeTF (default: 1 minute)
Candle timeframe used by the spike guard for Scalp entries.
Main-strategy spike-check timeframe — InpMainSpikeTF (default: 5 minutes)
Candle timeframe used by the spike guard for Trending, Ranging and Correction entries.
Check oversized candle range — InpSpikeCheckRange (default: On (true))
Checks for a candle whose full high-to-low range is unusually large compared with ATR.
Candle range threshold (ATR) — InpSpikeRangeATRMultiple (default: 2.5)
How many ATRs a candle's range must reach before it is treated as a range spike.
Check dominant candle wick — InpSpikeCheckWick (default: On (true))
Checks for a candle with an unusually dominant wick, which can signal a sharp rejection or burst.
Dominant wick threshold (%) — InpSpikeWickDominancePct (default: 70.0)
The wick's share of the candle range needed to trigger the wick check. Higher percentages require a more dominant wick.
Check opening gaps — InpSpikeCheckGap (default: On (true))
Checks for an unusually large gap between the previous close and the next candle's opening price.
Gap threshold (ATR) — InpSpikeGapATRMultiple (default: 1.0)
How large a gap must be, measured in ATR, to trigger the gap check.
Check rapid multi-candle acceleration — InpSpikeCheckAcceleration (default: On (true))
Checks whether several consecutive candles show unusually strong movement in one direction.
Check very fast price movement — InpSpikeCheckVelocity (default: On (true))
Checks for unusually fast short-term price movement.
Fast-movement threshold (points/second) — InpSpikeMaxPointsPerSecond (default: 2000.0)
Movement speed threshold for the velocity check, expressed in broker points per second.
Speed measurement window (seconds) — InpSpikeVelocityWindowSec (default: 2.0)
Number of seconds used to measure the short-term movement speed.
Check sudden spread increase — InpSpikeCheckSpread (default: On (true))
Checks whether the spread suddenly becomes much larger than its recent average.
Spread increase threshold (multiple) — InpSpikeSpreadMultiple (default: 3.0)
How many times the recent average spread triggers the spread-blowout check.
Wait after spike (bars) — InpSpikeCooldownBars (default: 2)
Number of candles on the relevant spike-check timeframe to wait after a detected spike.
ENGINE TIMEFRAME CONFIGURATION
Regime direction timeframe — InpRegimeBiasTF (default: 4 hours)
Higher timeframe used to estimate the broad market direction for regime filtering.
Regime context timeframe — InpRegimeContextTF (default: 1 hour)
Middle timeframe used to check the market's broader structure for regime filtering.
Regime confirmation timeframe — InpRegimeConfirmationTF (default: 30 minutes)
Additional timeframe used to confirm the market regime.
Enable regime filter — InpEnableRegimeFilter (default: On (true))
Turns the market-regime filter on or off. When on, Trend, Range and Correction candidates must fit the detected regime; Scalp and Synthetic are outside this extra filter.
ENGINE ANALYSIS TIMEFRAME MODE
Trending: use chart timeframe — InpTrendingChartTFAnalysis (default: On (true))
Use the chart's current timeframe for Trending analysis. This must be paired with the matching hierarchy switch being off.
Trending: use timeframe sequence — InpTrendingTimeframeHierarchy (default: Off (false))
Use the configured multi-timeframe sequence for Trending analysis. This must be paired with chart-timeframe analysis being off.
Ranging: use chart timeframe — InpRangingChartTFAnalysis (default: On (true))
Use the chart's current timeframe for Ranging analysis. This must be paired with the matching hierarchy switch being off.
Ranging: use timeframe sequence — InpRangingTimeframeHierarchy (default: Off (false))
Use the configured multi-timeframe sequence for Ranging analysis. This must be paired with chart-timeframe analysis being off.
Correction: use chart timeframe — InpCorrectionChartTFAnalysis (default: On (true))
Use the chart's current timeframe for Correction analysis. This must be paired with the matching hierarchy switch being off.
Correction: use timeframe sequence — InpCorrectionTimeframeHierarchy (default: Off (false))
Use the configured multi-timeframe sequence for Correction analysis. This must be paired with chart-timeframe analysis being off.
Scalp: use chart timeframe — InpScalpChartTFAnalysis (default: On (true))
Use the chart's current timeframe for Scalp analysis. This must be paired with the matching hierarchy switch being off.
Scalp: use timeframe sequence — InpScalpTimeframeHierarchy (default: Off (false))
Use the configured multi-timeframe sequence for Scalp analysis. This must be paired with chart-timeframe analysis being off.
Synthetic: use chart timeframe — InpSyntheticChartTFAnalysis (default: On (true))
Use the chart's current timeframe for Synthetic analysis. This must be paired with the matching hierarchy switch being off.
Synthetic: use timeframe sequence — InpSyntheticTimeframeHierarchy (default: Off (false))
Use the configured multi-timeframe sequence for Synthetic analysis. This must be paired with chart-timeframe analysis being off.
Trending: direction timeframe — InpTrendingBiasTF (default: 4 hours)
The higher timeframe used to determine the main direction for the Trending strategy when hierarchy mode is enabled.
Trending: structure timeframe — InpTrendingStructureTF (default: 1 hour)
The main timeframe used to read market structure for the Trending strategy.
Trending: backup timeframe — InpTrendingFallbackTF (default: 30 minutes)
A backup timeframe used by the Trending strategy when its main structure information needs a fallback.
Trending: optional confirmation — InpTrendingRefinementEnabled (default: Off (false))
Allows an additional timeframe to contribute confirmation to Trending setups. It is optional and only applies in hierarchy mode.
Trending: confirmation timeframe — InpTrendingRefinementTF (default: 1 minute5)
The timeframe used for the optional Trending confirmation.
Trending: entry timeframe — InpTrendingEntryTF (default: 5 minutes)
The timeframe used to refine or time Trending entries when hierarchy mode is enabled.
Ranging: context timeframe — InpRangingBiasTF (default: 4 hours)
The higher timeframe used for the Ranging strategy's context when hierarchy mode is enabled.
Ranging: range-structure timeframe — InpRangingStructureTF (default: 1 hour)
The main timeframe used to read range structure.
Ranging: backup timeframe — InpRangingFallbackTF (default: 30 minutes)
A backup timeframe for Ranging structure analysis.
Ranging: optional confirmation — InpRangingRefinementEnabled (default: Off (false))
Allows an extra timeframe to contribute confirmation to Ranging setups. It is optional and only applies in hierarchy mode.
Ranging: confirmation timeframe — InpRangingRefinementTF (default: 1 minute5)
The timeframe used for optional Ranging confirmation.
Ranging: entry timeframe — InpRangingEntryTF (default: 5 minutes)
The timeframe used to time Ranging entries when hierarchy mode is enabled.
Correction: context timeframe — InpCorrectionContextTF (default: 4 hours)
The higher timeframe used to understand the broader move for Correction setups.
Correction: structure timeframe — InpCorrectionStructureTF (default: 1 hour)
The timeframe used to examine the structure of the move being corrected.
Correction: optional confirmation — InpCorrectionRefinementEnabled (default: Off (false))
Allows an extra timeframe to contribute confirmation to Correction setups. It is optional and only applies in hierarchy mode.
Correction: confirmation timeframe — InpCorrectionRefinementTF (default: 1 minute5)
The timeframe used for optional Correction confirmation.
Correction: entry timeframe — InpCorrectionEntryTF (default: 5 minutes)
The timeframe used to time Correction entries when hierarchy mode is enabled.
Scalp: analysis/entry timeframe — InpScalpEntryTF (default: 1 minute)
The timeframe used by the Scalp engine for its analysis and market entry in hierarchy mode.
Scalp: stop-loss distance (points) — InpScalpStopDistancePoints (default: 100.0)
The Scalp market order's stop-loss distance in broker points. It is a distance setting, not a timeframe.
Synthetic: direction timeframe — InpSyntheticBiasTF (default: 4 hours)
The higher timeframe used for synthetic-market direction when hierarchy mode is enabled.
Synthetic: context timeframe — InpSyntheticContextTF (default: 1 hour)
The context timeframe used for synthetic analysis.
Synthetic: structure timeframe — InpSyntheticStructureTF (default: 5 minutes)
The timeframe used to detect synthetic structure and entry conditions.
Synthetic: optional confirmation — InpSyntheticRefinementEnabled (default: Off (false))
Allows an extra timeframe to contribute optional confirmation to synthetic setups. It only applies in hierarchy mode.
Synthetic: confirmation timeframe — InpSyntheticRefinementTF (default: 1 minute5)
The timeframe used for optional synthetic confirmation/scoring.
Synthetic: entry timeframe — InpSyntheticEntryTF (default: 5 minutes)
The timeframe used to time synthetic entries when hierarchy mode is enabled.
ENGINE ACTIVATION FLAGS
Enable Trending strategy — InpEnableTrending (default: On (true))
Turns the Trending strategy on or off.
Enable Ranging strategy — InpEnableRanging (default: On (true))
Turns the Ranging strategy on or off.
Enable Correction strategy — InpEnableCorrection (default: On (true))
Turns the Correction strategy on or off.
Enable Scalp strategy — InpEnableScalp (default: On (true))
Turns the Scalp strategy on or off. This strategy uses its own analysis path and market orders.
