Nexora Prime
- Эксперты
-
Emmanuel Chinedu Ifechukwu
Developer/ Circuit Technician - Версия: 8.28
- Обновлено: 1 октября 2026
- Активации: 5
NEXORA PRIME — Complete User Guide
==================================
A practical guide for setting up, understanding, and operating NEXORA PRIME in MetaTrader 5
COMPLETE INPUT REFERENCE
============================
Every user-facing input in the packaged version is described below. Values shown are the packaged defaults.
Lot Size & Account Sizing
-------------------------
Setting: Use Fixed Lot Size
Input: InpUseFixedLot
Default: false
Purpose: Choose fixed-lot sizing instead of percentage-risk sizing.
Setting: Fixed Lot Size
Input: InpFixedLotSize
Default: 0.10
Purpose: Lot size used when fixed-lot mode is enabled.
Setting: Risk Per Trade
Input: InpRiskPct
Default: 1.0%
Purpose: Percentage of account balance used for risk-based sizing. The input has a 5% hard safety cap.
Setting: Max Daily Loss
Input: InpMaxDailyLossPct
Default: 10.0%
Purpose: Maximum daily drawdown measured from the opening-day balance.
Target TP Distances & Scaling
-----------------------------
Setting: Override Engine TPs
Input: InpOverrideEngineTP
Default: false
Purpose: When ON, use the three fixed RR values below instead of each engine's tuned targets.
Setting: TP1 RR
Input: InpTP1_RR
Default: 1.0R
Purpose: First management milestone; normally moves protection toward break-even.
Setting: TP2 RR
Input: InpTP2_RR
Default: 1.8R
Purpose: Second milestone used for partial closing.
Setting: TP3 RR
Input: InpTP3_RR
Default: 3.0R
Purpose: Main final target when fixed-RR override is enabled.
Setting: TP1 Close %
Input: InpTP1_ClosePct
Default: 50%
Purpose: Percentage of the original position closed at TP1.
Setting: TP2 Close %
Input: InpTP2_ClosePct
Default: 25%
Purpose: Percentage of the original position closed at TP2.
Trailing Stop Controls
----------------------
Setting: Enable Trailing Stop
Input: InpEnableTrailingStop
Default: true
Purpose: Turns trailing-stop management on or off.
Setting: Trailing Step Distance
Input: InpTrailingStepPoints
Default: 150
Purpose: Distance in broker points used by the trailing logic.
Macro DXY & News Filters
------------------------
Setting: Enable DXY Filter
Input: InpEnableDXYFilter
Default: false
Purpose: Uses a 4H DXY trend filter when enabled.
Setting: DXY Symbol
Input: InpDXY_Symbol
Default: USDX
Purpose: Broker symbol name used for DXY. Change it if your broker uses another name.
Setting: Enable News Filter
Input: InpEnableNewsFilter
Default: false
Purpose: Uses the MT5 economic calendar to block trading around configured news events.
Setting: News Blackout
Input: InpNewsBlackoutMin
Default: 30 min
Purpose: Minutes before and after a qualifying news event during which trading is blocked.
Adaptive Precision Guard
------------------------
Setting: Loss-Streak Guard
Input: InpEnableLossStreakGuard
Default: true
Purpose: Adds a confidence floor after consecutive losses on a symbol.
Setting: Loss-Streak Expiry
Input: InpLossStreakExpiryHours
Default: 4 h
Purpose: How long the recent-loss condition remains relevant.
Setting: Global Minimum Confidence
Input: InpEnableMinConfidence
Default: false
Purpose: Turns on a global confidence gate.
Setting: Minimum Confidence
Input: InpMinConfidence
Default: 0.65
Purpose: Minimum confidence required when the global gate is enabled.
Setting: Scalp Minimum Confluence
Input: InpEnableScalpMinConfluenceScore
Default: false
Purpose: Turns on the scalp confluence gate.
Setting: Scalp Confluence Score
Input: InpScalpMinConfluenceScore
Default: 3.0
Purpose: Minimum scalp confluence when enabled.
Setting: Trending Minimum Confluence
Input: InpEnableTrendingMinConfluenceScore
Default: false
Purpose: Turns on the trending confluence gate.
Setting: Trending Confluence Score
Input: InpTrendingMinConfluenceScore
Default: 3.0
Purpose: Minimum trending confluence when enabled.
Setting: Ranging Minimum Confluence
Input: InpEnableRangingMinConfluenceScore
Default: false
Purpose: Turns on the ranging confluence gate.
Setting: Ranging Confluence Score
Input: InpRangingMinConfluenceScore
Default: 2.5
Purpose: Minimum ranging confluence when enabled.
Setting: Correction Minimum Confluence
Input: InpEnableCorrectionMinConfluenceScore
Default: false
Purpose: Turns on the correction confluence gate.
Setting: Correction Confluence Score
Input: InpCorrectionMinConfluenceScore
Default: 3.0
Purpose: Minimum correction confluence when enabled.
Setting: Synthetic Minimum Confluence
Input: InpEnableSyntheticMinConfluenceScore
Default: false
Purpose: Turns on the synthetic confluence gate.
Setting: Synthetic Confluence Score
Input: InpSyntheticMinConfluenceScore
Default: 6.0
Purpose: Minimum synthetic confluence when enabled.
Analysis Detection
------------------
Setting: Enable 347-Item Analysis
Input: InpEnable347AnalysisDetection
Default: true
Purpose: Runs the broad analysis catalog for information/diagnostics. It is not itself a trade blocker.
Setting: Log 347-Item Detections
Input: InpLog347AnalysisDetections
Default: false
Purpose: Writes detected catalog items to the log on each new chart bar.
Dynamic Balanced Evidence
-------------------------
Setting: Strong: Minimum Detected
Input: InpEvidenceStrongMinDetected
Default: 2
Purpose: Minimum detected tools for the strong-evidence tier.
Setting: Strong: Minimum Families
Input: InpEvidenceStrongMinFamilies
Default: 2
Purpose: Minimum independent evidence families for the strong tier.
Setting: Strong: Maximum Opposing
Input: InpEvidenceStrongMaxOpposing
Default: 1
Purpose: Maximum opposing evidence families allowed.
Setting: Strong: Minimum ICT
Input: InpEvidenceStrongMinICT
Default: 3
Purpose: Minimum ICT evidence categories.
Setting: Strong: Minimum Support
Input: InpEvidenceStrongMinSupport
Default: 0.18
Purpose: Minimum support ratio.
Setting: Strong: Maximum Contradiction
Input: InpEvidenceStrongMaxContradiction
Default: 0.25
Purpose: Maximum contradiction ratio.
Setting: Normal: Minimum Detected
Input: InpEvidenceNormalMinDetected
Default: 3
Purpose: Minimum detected tools for normal evidence.
Setting: Normal: Minimum Families
Input: InpEvidenceNormalMinFamilies
Default: 2
Purpose: Minimum independent families for normal evidence.
Setting: Normal: Maximum Opposing
Input: InpEvidenceNormalMaxOpposing
Default: 1
Purpose: Maximum opposing families allowed.
Setting: Normal: Minimum ICT
Input: InpEvidenceNormalMinICT
Default: 2
Purpose: Minimum ICT evidence categories.
Setting: Normal: Minimum Support
Input: InpEvidenceNormalMinSupport
Default: 0.12
Purpose: Minimum support ratio.
Setting: Normal: Maximum Contradiction
Input: InpEvidenceNormalMaxContradiction
Default: 0.34
Purpose: Maximum contradiction ratio.
Setting: Thin: Minimum Detected
Input: InpEvidenceThinMinDetected
Default: 3
Purpose: Minimum tools when evidence is thin/conflicted.
Setting: Thin: Minimum Families
Input: InpEvidenceThinMinFamilies
Default: 3
Purpose: Minimum independent families required in thin/conflicted conditions.
Setting: Thin: Maximum Opposing
Input: InpEvidenceThinMaxOpposing
Default: 0
Purpose: No opposing family is allowed in this tier.
Setting: Thin Support Trigger
Input: InpEvidenceThinSupportTrigger
Default: 0.08
Purpose: Below this support ratio, the stricter thin-evidence family requirement is used.
Setting: Conflict Trigger
Input: InpEvidenceConflictTrigger
Default: 0.50
Purpose: Above this contradiction ratio, the stricter conflict gate is used.
Setting: Conflict: Minimum Detected
Input: InpEvidenceConflictMinDetected
Default: 3
Purpose: Minimum tools during high contradiction.
Setting: Conflict: Minimum Families
Input: InpEvidenceConflictMinFamilies
Default: 3
Purpose: Minimum independent families during high contradiction.
Setting: Conflict: Maximum Opposing
Input: InpEvidenceConflictMaxOpposing
Default: 0
Purpose: Maximum opposing families during high contradiction.
SMC Confluence
--------------
Setting: Supply/Demand Zones
Input: InpEnableSupplyDemandZones
Default: true
Purpose: Adds supply/demand zones as supporting evidence where applicable.
Setting: Inverse FVG
Input: InpEnableInverseFVG
Default: true
Purpose: Adds inverse fair-value-gap evidence where applicable.
Setting: Fibonacci OTE
Input: InpEnableFibonacciOTE
Default: true
Purpose: Adds the 61.8%–78.6% retracement area as confluence.
Setting: Price Action Detection
Input: InpEnablePADetection
Default: true
Purpose: Adds pinbar/engulfing-style price-action evidence.
Setting: Divergence Detection
Input: InpEnableDivergenceDetection
Default: true
Purpose: Adds MACD/RSI divergence evidence.
Setting: CVD Delta
Input: InpEnableCVDDelta
Default: true
Purpose: Adds cumulative-volume-delta evidence.
Setting: Chart Patterns
Input: InpEnableChartPatterns
Default: true
Purpose: Adds detected chart-pattern evidence.
Time, Day & Synthetic Mode
--------------------------
Setting: Session Management
Input: InpEnableSessionManagement
Default: false
Purpose: Master switch for session/day management.
Setting: Auto Detect Synthetic
Input: InpAutoDetectSynthetic
Default: true
Purpose: Automatically adapts filtering for synthetic-style symbols.
Setting: Enable Synthetic Engine
Input: InpEnableSyntheticEngine
Default: true
Purpose: Allows the dedicated synthetic engine to operate.
ICT Tools
---------
Setting: Enable ICT Models
Input: InpEnableICTModels
Default: true
Purpose: Enables advanced ICT model detection.
Setting: Enable SMT
Input: InpEnableICTSMT
Default: false
Purpose: Enables SMT divergence when peer symbols are configured.
Setting: SMT Symbol 1
Input: InpICTSMTSymbol1
Default: blank
Purpose: First correlated symbol name exactly as shown by the broker.
Setting: SMT Symbol 2
Input: InpICTSMTSymbol2
Default: blank
Purpose: Second correlated symbol name exactly as shown by the broker.
Setting: Silver Bullet Window 1
Input: InpICTSilverBulletStart1 / End1
Default: 03:00–04:00
Purpose: Broker/server-hour window.
Setting: Silver Bullet Window 2
Input: InpICTSilverBulletStart2 / End2
Default: 10:00–11:00
Purpose: Broker/server-hour window.
Setting: Silver Bullet Window 3
Input: InpICTSilverBulletStart3 / End3
Default: 14:00–15:00
Purpose: Broker/server-hour window.
Synthetic Settings
------------------
Setting: Synthetic M15 Confluence
Input: InpSyntheticM15Confluence
Default: false
Purpose: Adds M15 evidence to synthetic scoring.
Setting: Synthetic Pending Orders
Input: InpSyntheticPendingOrders
Default: true
Purpose: Allows valid synthetic pullback limit entries.
Setting: Synthetic Stop Orders
Input: InpSyntheticStopOrders
Default: true
Purpose: Allows confirmed breakout stop entries.
Setting: Require Sweep
Input: InpSyntheticRequireSweep
Default: false
Purpose: If enabled, a confirmed M5 liquidity sweep is required rather than sweep OR structure break.
Setting: Synthetic Diagnostics
Input: InpSyntheticDiagnostics
Default: false
Purpose: Adds detailed synthetic setup messages to the log.
Setting: Spike Cooldown
Input: InpSyntheticSpikeCooldown
Default: true
Purpose: Pauses new synthetic entries after abnormal spikes.
Setting: Spike ATR Threshold
Input: InpSyntheticSpikeATR
Default: 3.0 ATR
Purpose: Abnormal M5 range threshold.
Setting: Spike Cooldown Bars
Input: InpSyntheticSpikeCooldownBars
Default: 2
Purpose: Number of M5 bars to wait after a spike.
Setting: Synthetic Max Spread
Input: InpSyntheticMaxSpreadPoints
Default: 1000 points
Purpose: Hard synthetic spread ceiling.
Setting: Synthetic Spread/ATR
Input: InpSyntheticMaxSpreadATR
Default: 0.35
Purpose: Maximum spread as a fraction of M5 ATR; 0 disables this ratio check.
Setting: Pending Invalidation
Input: InpSyntheticPendingInvalidation
Default: true
Purpose: Cancels stale or invalid synthetic pending orders.
Setting: Pending Max Bars
Input: InpSyntheticPendingMaxBars
Default: 6
Purpose: Maximum M5 bars a pending setup can remain.
Setting: Pending Invalidation ATR
Input: InpSyntheticPendingInvalidationATR
Default: 3.50 ATR
Purpose: Price-distance invalidation threshold.
Synthetic Family Tuning
-----------------------
Setting: Boom Minimum Confidence
Input: InpSyntheticMinConfBoom
Default: 0.74
Purpose: Minimum confidence for Boom-family setups.
Setting: Crash Minimum Confidence
Input: InpSyntheticMinConfCrash
Default: 0.74
Purpose: Minimum confidence for Crash-family setups.
Setting: Volatility Minimum Confidence
Input: InpSyntheticMinConfVol
Default: 0.75
Purpose: Minimum confidence for Volatility-family setups.
Setting: Step Minimum Confidence
Input: InpSyntheticMinConfStep
Default: 0.75
Purpose: Minimum confidence for Step-family setups.
Setting: Other Synthetic Minimum Confidence
Input: InpSyntheticMinConfOther
Default: 0.75
Purpose: Minimum confidence for other synthetic families.
Setting: Boom Stop ATR
Input: InpSyntheticStopBoom
Default: 1.35 ATR
Purpose: Stop-distance multiplier.
Setting: Crash Stop ATR
Input: InpSyntheticStopCrash
Default: 1.35 ATR
Purpose: Stop-distance multiplier.
Setting: Volatility Stop ATR
Input: InpSyntheticStopVol
Default: 1.15 ATR
Purpose: Stop-distance multiplier.
Setting: Step Stop ATR
Input: InpSyntheticStopStep
Default: 1.15 ATR
Purpose: Stop-distance multiplier.
Setting: Other Stop ATR
Input: InpSyntheticStopOther
Default: 1.15 ATR
Purpose: Stop-distance multiplier.
Setting: Boom Displacement
Input: InpSyntheticDispBoom
Default: 0.70 ATR
Purpose: Minimum displacement body relative to ATR.
Setting: Crash Displacement
Input: InpSyntheticDispCrash
Default: 0.70 ATR
Purpose: Minimum displacement body relative to ATR.
Setting: Volatility Displacement
Input: InpSyntheticDispVol
Default: 0.55 ATR
Purpose: Minimum displacement body relative to ATR.
Setting: Step Displacement
Input: InpSyntheticDispStep
Default: 0.55 ATR
Purpose: Minimum displacement body relative to ATR.
Setting: Other Displacement
Input: InpSyntheticDispOther
Default: 0.55 ATR
Purpose: Minimum displacement body relative to ATR.
Trading Hours & Days
--------------------
Setting: Enable Time Filter
Input: InpEnableTimeFilter
Default: false
Purpose: Turns UTC trading-hour restrictions on.
Setting: Start Hour
Input: InpStartHour
Default: 07 UTC
Purpose: Trading start hour when the time filter is enabled.
Setting: End Hour
Input: InpEndHour
Default: 23 UTC
Purpose: Trading end hour when the time filter is enabled.
Setting: Avoid Asian Session
Input: InpAvoidAsianSession
Default: false
Purpose: Blocks 00:00–07:00 UTC.
Setting: Trade Monday
Input: InpTradeMonday
Default: true
Purpose: Allows Monday trading.
Setting: Trade Friday
Input: InpTradeFriday
Default: true
Purpose: Allows Friday trading.
Setting: Friday Close Hour
Input: InpFridayCloseHour
Default: 22 UTC
Purpose: Stops new Friday trading at this hour.
Trade & Exposure Limits
-----------------------
Setting: Max Symbol Trades
Input: InpMaxSymbolTrades
Default: 1
Purpose: Maximum concurrent trades for one symbol.
Setting: Max Total Trades
Input: InpMaxTotalTrades
Default: 3
Purpose: Maximum concurrent trades across the EA.
Pending Order Expiry
--------------------
Setting: Use Pending Expiry
Input: InpUsePendingExpiry
Default: true
Purpose: Automatically expires pending orders.
Setting: Expiry Hours
Input: InpPendingExpiryHours
Default: 0
Purpose: Whole hours after placement.
Setting: Expiry Minutes
Input: InpPendingExpiryMinutes
Default: 45
Purpose: Additional minutes after the hour component.
Emergency Equity Floor
----------------------
Setting: Enable Equity Floor
Input: InpEnableEquityFloor
Default: false
Purpose: Stops new trading when equity reaches the specified floor.
Setting: Minimum Equity
Input: InpMinEquityThreshold
Default: 9000
Purpose: Account-equity floor in account currency.
Execution Safety
----------------
Setting: Maximum Entry Drift
Input: InpMaxEntryDriftPoints
Default: 40 points
Purpose: Maximum allowed difference between the signal price and execution price.
Setting: Requote Retries
Input: InpMaxRetryOnRequote
Default: 2
Purpose: Number of retry attempts after requote/off-quotes conditions.
Notifications & Display
-----------------------
Setting: Show HUD Dashboard
Input: InpShowHUDDashboard
Default: true
Purpose: Shows the on-chart information panel.
Setting: Push Alerts
Input: InpSendPushAlerts
Default: false
Purpose: Sends MT5 mobile push alerts when supported/configured.
Setting: Email Alerts
Input: InpSendEmailAlerts
Default: false
Purpose: Sends MT5 email alerts when supported/configured.
Setting: Verbose Logging
Input: InpVerboseLogging
Default: false
Purpose: Adds more detailed messages to the Experts/Journal logs.
Execution & Protection
----------------------
Setting: Maximum Spread
Input: InpMaxSpreadPoints
Default: 1000 points
Purpose: Blocks entries when spread exceeds this limit.
Setting: Magic Number
Input: InpMagicNumber
Default: 888111
Purpose: Unique identifier used to separate this EA's trades from other trades.
Spike Detector
--------------
Setting: Enable Spike Detector
Input: InpEnableSpikeDetector
Default: false
Purpose: Master switch for the abnormal-market detector.
Setting: Range Check
Input: InpSpikeCheckRange
Default: true
Purpose: Detects unusually large bars relative to ATR.
Setting: Range Threshold
Input: InpSpikeRangeATRMultiple
Default: 2.5 ATR
Purpose: Range-spike threshold.
Setting: Wick Check
Input: InpSpikeCheckWick
Default: true
Purpose: Detects one-sided wick/climax conditions.
Setting: Wick Dominance
Input: InpSpikeWickDominancePct
Default: 70%
Purpose: Minimum wick share of the bar range.
Setting: Gap Check
Input: InpSpikeCheckGap
Default: true
Purpose: Detects opening gaps versus the prior close.
Setting: Gap Threshold
Input: InpSpikeGapATRMultiple
Default: 1.0 ATR
Purpose: Gap size threshold.
Setting: Acceleration Check
Input: InpSpikeCheckAcceleration
Default: true
Purpose: Detects three-bar directional acceleration.
Setting: Velocity Check
Input: InpSpikeCheckVelocity
Default: true
Purpose: Detects unusually fast intrabar price movement.
Setting: Max Points/Second
Input: InpSpikeMaxPointsPerSecond
Default: 1000
Purpose: Velocity threshold.
Setting: Velocity Window
Input: InpSpikeVelocityWindowSec
Default: 2 sec
Purpose: Measurement window.
Setting: Spread Check
Input: InpSpikeCheckSpread
Default: true
Purpose: Detects a spread blowout relative to the recent average.
Setting: Spread Multiple
Input: InpSpikeSpreadMultiple
Default: 3.0×
Purpose: Spread blowout threshold.
Setting: Spike Cooldown
Input: InpSpikeCooldownBars
Default: 2 M5 bars
Purpose: Quarantine period after a detected spike.
Engine Activation
-----------------
Setting: Trending Engine
Input: InpEnableTrending
Default: true
Purpose: Enable/disable Trending.
Setting: Ranging Engine
Input: InpEnableRanging
Default: true
Purpose: Enable/disable Ranging.
Setting: Correction Engine
Input: InpEnableCorrection
Default: true
Purpose: Enable/disable Correction.
Setting: Scalp Engine
Input: InpEnableScalp
Default: true
Purpose: Enable/disable Scalp. The scalp engine uses 1M entry evaluation.
