10points 3.mq4 - page 453
You are missing trading opportunities:
- Free trading apps
- Over 8,000 signals for copying
- Economic news for exploring financial markets
Registration
Log in
You agree to website policy and terms of use
If you do not have an account, please register
Leandar have you seen this post?
https://www.mql5.com/en/forum/174975
post 4509
I do not understand sorry ... Do you mean: we need the version with no indicators trading on open bar by tick as TickScalper?
look this BUY/SELL ea opening orders suddenly dont know what is based on this...
i got this ea from this thread
add pips increment in this 2 ea will be better.
10x3bbuy.mq4 and 10x3bsell.mq4
Leandar have you seen this post?
https://www.mql5.com/en/forum/174975
post 4509yes mrtools i saw that post i tested with smi but main problem was delay in opening orders,
look my above post there is two ea attached that opening orders suddenly thats what we need in "10points_3_Smi_Adj_TakeProfit"
or add pips increment in that BUY-SELL ea ( attached above ) same of 10points_3_Smi_Adj_TakeProfit
Like i stated in that post i removed all indicators and its only using macd, only asking you to share your results, as far as immediately opening orders change bar to 0 then you will be using open bar, as far as buy and sell just change your common outputs one version only buy other version only sell with different magic number.
It is the account with 10points_3_Smi_1.01 EA.
Alpari broker,
1:100 leverage with 3,000 dollars initial deposit.
Since 05th of September.
EURUSD only.
This account had margin call and 3,000 dollar deposit became 160 dollars only.
For now - we all are see how the phoenix rose from the ashes: it is 600 dollars for now!
it is EURUSD only with
3,000 initial deposit
with 1:100 leverage, Alpari:----------
My comment:
The best pair for this EA is USDJPY (not EURUSD). EURUSD is the second one after USDJPY.
That's all news.
===================
- 10points_3_Smi_Adj_TakeProfit EA is on this post. What this version is doing is using the pips setting, as Ea opens a buy trade, it goes aganist you 20 pips the Ea should open another trade, with a new take profit the original take profit + 20 pips to keep the original take profit,if it still goes aganist the original trade another 20 pips the Ea should open another buy but this time the take profit is same as original but +40 pips and etc.. By default the take profit is 10 pips and lot increase is also default at 1.
-10points_3_Smi_1.01 EA with settings for M1 timeframe, together with indicators is on this post.
- Some explanation about how to setup for different pairs - read this post.
- EA is trading on 3,000 dollars initial deposit using stats website - read this post for results online.
- next version 10points_3_Smi_1.02a EA is on this post: changed out the trailing stop, added a breakeven plus trailing.
- 10points_3_Smi_1.3 EA is on this post. This is version 1.3 smi, the trailing stop and break even are separate also added a lot more safety features.
- non-martingale settings for 2 versions of the EAs with pre-set files and trading results - read this post;
- some other martingale settings for 10points_3_Smi_1.02a EA is on this post.
- 10points_3_Easy EA is on this post. This version is using TDI, heiken ashi and by default 5 period high low ma.
- 10points_3_Easy-1 EA is on this post. This version is using different TDI indicator which seems to be better.
10points_3_Smi_1.01 EA fixed version with settings for M1 timeframe, together with fixed indicators: download from this post.
Statements by pairs and visual statements are attached to this post (inside zip file).
M1 timeframe, FXCM broker.
===================
Some profit/loss in dollars from the beginning of trading since 14th of August:
EURCHF: 3744
EURJPY: 6911
EURUSD: 1103
USDCHF: 6485
USDJPY: 1158
====================
Some profit/loss in dollars for this week (in dollars):
EURCHF: 95
EURJPY: 210
EURUSD: 309
USDCHF: 125
USDJPY: 45
====================
Just some of the visual statements (from the beginning of the trading since 05th of August) - all visual statements - see zip file attached to the post:
EURJPY:
EURCHF:
USDCHF:
USDJPY:
All the statements (including Metatrader's statements by pairs, by pips and by dollars) - see zip/rar file attached.
----------
USDJPY is the best pair to trade: less risky, small drawdown and small maxmum lot size.
And FXCM broker is much more better than Alpari for this EA (just compare EURUSD trades here with the trades for EURUSD on the next post).
Some pairs are profitable in pips calculation. It means that it will be profitable in case of fix lot size with no any martingale.
Just about p/l in 4 digit pips since the beginning of the trading (14 august)
EURCHF: 3766
EURJPY: 637
EURUSD: -535
USDCHF: 1092
USDJPY: 1597
That's all news
===================
- 10points_3_Smi_Adj_TakeProfit EA is on this post. What this version is doing is using the pips setting, as Ea opens a buy trade, it goes aganist you 20 pips the Ea should open another trade, with a new take profit the original take profit + 20 pips to keep the original take profit,if it still goes aganist the original trade another 20 pips the Ea should open another buy but this time the take profit is same as original but +40 pips and etc.. By default the take profit is 10 pips and lot increase is also default at 1.
-10points_3_Smi_1.01 EA with settings for M1 timeframe, together with indicators is on this post.
- Some explanation about how to setup for different pairs - read this post.
- EA is trading on 3,000 dollars initial deposit using stats website - read this post for results online.
- next version 10points_3_Smi_1.02a EA is on this post: changed out the trailing stop, added a breakeven plus trailing.
- 10points_3_Smi_1.3 EA is on this post. This is version 1.3 smi, the trailing stop and break even are separate also added a lot more safety features.
- non-martingale settings for 2 versions of the EAs with pre-set files and trading results - read this post;
- some other martingale settings for 10points_3_Smi_1.02a EA is on this post.
- 10points_3_Easy EA is on this post. This version is using TDI, heiken ashi and by default 5 period high low ma.
- 10points_3_Easy-1 EA is on this post. This version is using different TDI indicator which seems to be better.
The other account for 10points_3_Smi_1.01 EA, FXCM broker, 2,000 dollar initial deposit.
Since 21st of November.
USDJPY only.
FXCM broker.
===================
- 10points_3_Smi_Adj_TakeProfit EA is on this post. What this version is doing is using the pips setting, as Ea opens a buy trade, it goes aganist you 20 pips the Ea should open another trade, with a new take profit the original take profit + 20 pips to keep the original take profit,if it still goes aganist the original trade another 20 pips the Ea should open another buy but this time the take profit is same as original but +40 pips and etc.. By default the take profit is 10 pips and lot increase is also default at 1.
-10points_3_Smi_1.01 EA with settings for M1 timeframe, together with indicators is on this post.
- Some explanation about how to setup for different pairs - read this post.
- EA is trading on 3,000 dollars initial deposit using stats website - read this post for results online.
- next version 10points_3_Smi_1.02a EA is on this post: changed out the trailing stop, added a breakeven plus trailing.
- 10points_3_Smi_1.3 EA is on this post. This is version 1.3 smi, the trailing stop and break even are separate also added a lot more safety features.
- non-martingale settings for 2 versions of the EAs with pre-set files and trading results - read this post;
- some other martingale settings for 10points_3_Smi_1.02a EA is on this post.
- 10points_3_Easy EA is on this post. This version is using TDI, heiken ashi and by default 5 period high low ma.
- 10points_3_Easy-1 EA is on this post. This version is using different TDI indicator which seems to be better.
And one more
It is very experimental situation: I opened account with Alpari, with initial deposit of 200 dollars.
10points_3_Smi_Adj_TakeProfit EA,
non-martingale settings (fixed 0.01 lot size with no any martingale),
Alpari broker, 200 dollar initial deposit.
Since 12 of December.
USDJPY only.
No any trades yet (I opened it today only).
Next account: 10points_3_Smi_Adj_TakeProfit EA, non-martingale settings (fixed 0.01 lot size with no any martingale), FXCM broker, 500 dollar initial deposit.
Since 1st of December.
USDJPY only.
===================
- 10points_3_Smi_Adj_TakeProfit EA is on this post. What this version is doing is using the pips setting, as Ea opens a buy trade, it goes aganist you 20 pips the Ea should open another trade, with a new take profit the original take profit + 20 pips to keep the original take profit,if it still goes aganist the original trade another 20 pips the Ea should open another buy but this time the take profit is same as original but +40 pips and etc.. By default the take profit is 10 pips and lot increase is also default at 1.
-10points_3_Smi_1.01 EA with settings for M1 timeframe, together with indicators is on this post.
- Some explanation about how to setup for different pairs - read this post.
- EA is trading on 3,000 dollars initial deposit using stats website - read this post for results online.
- next version 10points_3_Smi_1.02a EA is on this post: changed out the trailing stop, added a breakeven plus trailing.
- 10points_3_Smi_1.3 EA is on this post. This is version 1.3 smi, the trailing stop and break even are separate also added a lot more safety features.
- non-martingale settings for 2 versions of the EAs with pre-set files and trading results - read this post;
- some other martingale settings for 10points_3_Smi_1.02a EA is on this post.
- 10points_3_Easy EA is on this post. This version is using TDI, heiken ashi and by default 5 period high low ma.
- 10points_3_Easy-1 EA is on this post. This version is using different TDI indicator which seems to be better.
Like i stated in that post i removed all indicators and its only using macd, only asking you to share your results, as far as immediately opening orders change bar to 0 then you will be using open bar, as far as buy and sell just change your common outputs one version only buy other version only sell with different magic number.
Theoretically "10points_3_Smi_Adj_TakeProfit EA" wont work
Reasons :
1, TP increase but opening new order range ( pips ) not increase in this EA so this will get big draw down due to unwanted open orders in small range.
2, There is no "true / false" in indicators, that 3 indicators taking more time to open orders
Please add "PIPS" range increase and "true / false" in indicators to test in forward.