16 lis 2026 · @Paul
1. Introduction
JET PRO is a price-action signal indicator for MetaTrader 5. It turns your chart into a cockpit: each signal comes with an entry, a stop loss, five take-profit levels, a quality grade and a live dashboard (the HUD).
JET PRO is an indicator. It shows signals and suggested levels, but it never opens, changes or closes trades. Every trading decision stays with you.
Requirements
- MetaTrader 5 (any recent build)
- Any symbol: Forex, metals, indices, crypto
- Any timeframe from M1 to MN
Installation
- In MetaTrader 5, open File → Open Data Folder.
- Copy JetPRO.ex5 (or JetPRO.mq5 ) into MQL5 → Indicators.
- Back in MetaTrader, right-click Indicators in the Navigator and choose Refresh.
- Drag JetPRO onto a chart.
- On the Common tab, tick Allow DLL imports only if your version asks for it; JET PRO 2.2 needs no DLLs. Click OK.
The first load reads up to 500 candles of history (setting MaxBarsToScan ). On a fresh chart MetaTrader may need a few seconds to download data; the HUD fills in as soon as it is ready.
2. Quick start
Five minutes from install to your first signal:
- Load JET PRO on a chart, for example EURUSD M15. The chart switches to the dark cockpit colors and the HUD appears in the top-left corner.
- Pick a mode. Click the mode name on the HUD (or press 1–4). Start with CRUISE, the balanced default.
- Read the lock banner. "SCANNING ..." means no signal is active. "BUY / SELL TARGET LOCKED" means a signal is live.
- Check the grade. The SIGNAL THRUST meter shows how many of the 5 quality checks passed, and the grade (A+, A, B, C).
- Follow the plan on the chart. Entry, SL and TP1–TP5 are drawn as lines and zones. The R-tape on the HUD shows where price is right now.
- Watch the squadron. The 6 boxes show the same signal on other timeframes. WINGMEN tells you how many agree with your signal.
- Turn on alerts. Popup and sound alerts are on by default; enable push notifications to get signals on your phone (section 9).
3. Flight modes
JET PRO has four signal modes. Switch live by clicking the mode name on the HUD (it cycles), or with hotkeys 1–4. The chart rebuilds instantly.
| Key | Mode | Pattern | Type | Signal frequency |
|---|---|---|---|---|
| 1 | AFTERBURNER | Engulfing candle | Reversal | Highest |
| 2 | INTERCEPT | Pin bar + confirmation candle | Reversal | High |
| 3 | CRUISE (default) | Inside-bar breakout | Breakout | Moderate, steady |
| 4 | STEALTH | Donchian channel breakout | Breakout | Low, in waves |
AFTERBURNER – engulfing. The signal candle's body fully engulfs the previous opposite candle. Entry = close of the engulfing candle. SL = beyond the low (BUY) or high (SELL) of both candles, plus the ATR buffer.
INTERCEPT – pin bar. A pin bar (long wick, small body) rejects a price, then the next candle closes beyond the pin bar's high (BUY) or low (SELL). Entry = close of the confirmation candle. SL = beyond the pin bar and the confirmation candle, plus the buffer. Fine-tune with PinBarWickRatio and PinBarMaxBodyRatio .
CRUISE – inside-bar breakout. A candle forms completely inside the previous "mother" candle, then the next candle closes beyond the inside bar. Entry = close of the breakout candle. SL = beyond the inside bar and mother candle, plus the buffer.
STEALTH – channel breakout. The candle closes above the highest high (BUY) or below the lowest low (SELL) of the last 20 candles ( DonchianLookback ). Entry = close of the breakout candle. SL = beyond the other side of the channel, plus the buffer.
In every mode the signal candle must be at least 0.5 × ATR ( MinBodyATRRatio ), so tiny candles never trigger a signal.
4. Signals and the trade plan
Every signal is a complete plan: entry, stop loss and five targets measured in R (1R = the distance from entry to SL).
| Level | Price |
|---|---|
| Entry | Close of the signal candle |
| SL | Beyond the pattern, plus SLBufferATRMultiplier × ATR |
| TP1 – TP5 | Entry + 1R, 2R, 3R, 4R, 5R in the signal direction |
One active signal at a time. While a signal is active, JET PRO ignores new patterns. This keeps one clear plan on the chart.
When a signal ends. The active signal is retired when one of these happens:
- price reaches TP5;
- the candle closes beyond the SL 3 times in a row ( InvalidationCloses ); the HUD shows "SL WARN 1/3", "2/3" as a warning first;
- the signal is 150 candles old ( MaxBarsSinceSignal ).
The next pattern after that starts a new signal.
No repainting. With SignalsOnCandleClose = true (default) signals use closed candles only. A signal never moves or disappears after its candle has closed.
Direction. TradeDirection shows all signals, BUY only or SELL only.
5. The cockpit HUD
The HUD reads from top to bottom: what is happening, how good the signal is, where price is, and what other timeframes and symbols say.
| Section | What it shows |
|---|---|
| Header | JET PRO + version, symbol and timeframe, the [-] / [+] collapse button |
| MODE | Current flight mode (click to cycle) and the signal GRADE on the right |
| STAT | WAITING, RUNNING, TP1–TP5 REACHED or SL WARN x/3; AGE = candles since the signal / maximum age |
| Lock banner | "BUY / SELL TARGET LOCKED" (blinking) or "SCANNING ..." |
| HTF ATTITUDE | Higher-timeframe trend as an aircraft horizon: CLIMB (up), DIVE (down) or LEVEL, with an angle in degrees |
| SIGNAL THRUST | 5 bars = 5 quality checks, score x/5 and the GRADE (section 6) |
| R-TAPE | TP5 … SL ladder with prices; reached targets turn gold; the ◄ pointer shows the current R, "best" the highest R reached |
| READOUTS | P/L in pips, candle CLOSE countdown, SPREAD, ATR in pips, chart TREND, RISK amount, LOTS for that risk |
| AUTOPILOT | Suggested stop: HOLD SL, STOP → BE / TP1 … with price, or STOP HIT (section 7) |
| Filter row | HTF / SES / SPR filter status, or OFF |
| SQUADRON | The signal on 6 timeframes (section 8) |
| SCANNER | Signals on your symbol list (section 8) |
Readouts in detail
- P/L – pips from entry to the current chart price. Green in profit, red in loss.
- SPREAD – turns orange with "!" when the spread is above MaxSpreadPips or larger than half the signal's risk (common at rollover or news).
- TREND – UP or DOWN: last close above or below the EMA 200 ( TrendMAPeriod ).
- RISK – RiskPercent (default 1%) of your account balance.
- LOTS – the position size that loses exactly RISK at the stop loss, rounded to your broker's lot step. Orange = the broker minimum is larger than your risk allows.
Collapsed HUD. Click [-] to shrink the HUD to the header, MODE, STAT and the lock banner (with the live R). Click [+] to open it again.
6. Signal grade
Every signal gets a grade from five quality checks on its signal candle. The grade describes the signal; it never hides or blocks it.
| Bar | Modes | Passes when |
|---|---|---|
| HTF | All | The higher-timeframe trend (close vs EMA 50 on H4 by default) points the same way as the signal |
| SES | All | The signal candle formed between SessionStartHour and SessionEndHour (server time) |
| ROOM | All | At least 2R of free space between entry and the nearest swing level price has not broken yet (last 150 candles); nothing in the way also passes |
| VOL | CRUISE, STEALTH | ATR at the signal is above its 50-candle average: the breakout has energy |
| LVL | AFTERBURNER, INTERCEPT | The pattern's low (BUY) or high (SELL) is the extreme of the last 20 candles: the reversal rejects a real level |
| TRD | All | On the chart timeframe the close is on the signal's side of the EMA 200 |
The 4th bar is mode-aware: breakouts are checked for energy (VOL), reversals for a real level (LVL). Its label switches automatically when you change mode.
| Score | Grade |
|---|---|
| 5 / 5 | A+ |
| 4 / 5 | A |
| 3 / 5 | B |
| 0 – 2 / 5 | C |
Where you see it: the SIGNAL THRUST meter, GRADE next to MODE on the HUD, the target-lock label on the chart ("SELL LOCK · GRADE A"), and the new-signal alert.
How to use it. A+ and A mean the context is on your side. With B or C, look at which bars are dark. A B with only VOL missing is very different from a B where the higher-timeframe trend is against you.
Tip: the SES check always uses your session hours, even when the session filter is off. Set them to the hours you actually trade.
7. On the chart
The active signal's whole story is drawn on the chart.
Signal arrow. A BUY arrow (cyan) below or a SELL arrow (pink) above the signal candle, 1 ATR away from it.
Target lock. A blinking crosshair surrounds the signal arrow, with the label "BUY / SELL LOCK · GRADE x". Turn off with ShowTargetLock .
Zones and level lines. A red risk zone between entry and SL, and five green reward bands that fade toward TP5. Lines with price labels mark ENTRY, SL and TP1–TP5; a reached target turns solid gold and its label reads "TP2 HIT". The levels extend 15 candles into the future ( LevelExtendBars ).
Runway lights. Evenly spaced lights along each TP line. They turn gold when that target is reached. Turn off with ShowRunwayLights .
Autopilot stop. A suggested trailing stop, drawn as a stepped amber line from the signal:
| AutopilotMode | The stop moves to |
|---|---|
| Step (default) | BE after TP1, TP1 after TP2, TP2 after TP3, TP3 after TP4 |
| Wide | BE after TP2, TP1 after TP3, TP2 after TP4 |
| Off | Not shown |
If price later touches the moved stop, the line ends there with "AUTOPILOT STOP HIT @BE" (or @TP1 …), the HUD shows STOP HIT and an alert fires. The autopilot is display only: it never touches your orders.
Power candles. JET PRO draws its own candles with 4 brightness levels by candle body compared with ATR:
| Level | Body size | Look |
|---|---|---|
| Weak | below 0.35 × ATR | Faded into the background |
| Normal | 0.35 – 0.70 × ATR | Medium |
| Strong | 0.70 – 1.10 × ATR | Full color |
| Impulse | 1.10 × ATR and above | Brightest, slightly whitened |
MetaTrader's own candles are hidden while power candles are on. Change the levels with PowerWeakATR , PowerStrongATR , PowerImpulseATR , or turn off with PowerCandles .
Chart paint. With PaintChart = true the background, grid, scales, candles and volumes switch to the cockpit colors. Your original colors are saved and come back when JET PRO is removed.
8. Squadron view and scanner
Two panels look beyond the current chart: the squadron watches other timeframes of the same symbol, the scanner watches other symbols.
Squadron (multi-timeframe). Six boxes run the full JET PRO signal engine – same mode, same settings – on other timeframes of the chart symbol ( SquadronTFs , default M5, M15, M30, H1, H4, D1).
| Box shows | Meaning |
|---|---|
| ▲ / ▼ arrow + R | Active BUY / SELL signal and its current R |
| TP1 – TP5 (gold) | Highest target that signal has reached |
| ● SCAN | No active signal on that timeframe |
| LOAD | History still downloading |
The box of the chart's own timeframe has a brighter top bar. Click any box to switch the chart to that timeframe. Top right, WINGMEN x/5 counts the other timeframes with a signal in the same direction as yours; with no signal it shows the BUY / SELL count.
Multi-symbol scanner. Runs the same engine on your symbol list ( ScannerSymbols ) on the chart timeframe or a fixed one ( ScannerTimeframe ).
| Column | Meaning |
|---|---|
| Symbol | Symbol name |
| Direction | BUY / SELL, or -- when no signal |
| R | Current R of the active signal |
| Status | RUN, TP1 – TP5, SL WARN, SCAN, LOADING, NO DATA, NOT FOUND |
Click a symbol to switch the chart ( ScannerClickAction ), or open a new chart with a template or an empty chart. Use the exact symbol names of your broker (for example EURUSD.m ). The scanner refreshes every 5 seconds ( ScannerRefreshSec ); ScannerAlerts sends an alert when a scanned symbol gets a new signal.
9. Signal filters and alerts
Filters decide which patterns become signals; alerts tell you when something happens. All filters are off by default.
| Filter | Setting | Effect |
|---|---|---|
| HTF trend | UseHTFFilter , HTFTimeframe (H4), HTFMAPeriod (50) | Only signals in the direction of the higher-timeframe trend (close above / below the EMA). No HTF data yet = the signal is allowed. |
| Session | UseSessionFilter , SessionStartHour (7), SessionEndHour (20) | Only signals whose candle formed inside these server-time hours |
| Spread guard | MaxSpreadPips (0 = off) | Holds back the new-signal alert while the spread is too wide; it fires if the spread normalises before the next candle |
The filter row on the HUD shows each filter's live status: the HTF trend (UP / DN), the session (OPEN / CLOSED) and the spread (OK / HIGH).
Alerts
| Alert | Setting | Example |
|---|---|---|
| New signal | EnableAlerts | EURUSD M15: JET PRO SELL signal (CRUISE, grade A 4/5) |
| Target reached | EnableTradeAlerts | SELL signal reached TP2 (+2R) - autopilot stop to TP1 1.10384 |
| SL warning | EnableTradeAlerts | SELL signal SL warning 1/3 |
| Autopilot stop hit | EnableTradeAlerts + autopilot on | SELL signal: autopilot stop hit at BE 1.10546 |
| Scanner signal | ScannerAlerts | New signal on a scanned symbol |
Alerts use a popup with sound ( AlertSoundFile ). With EnablePush = true they also go to the MetaTrader mobile app: enter your MetaQuotes ID under Tools → Options → Notifications and tick Enable Push Notifications.
10. Controls and hotkeys
Everything you switch often is one click or one key away.
| Action | How |
|---|---|
| Afterburner / Intercept / Cruise / Stealth | Keys 1 / 2 / 3 / 4 (main keyboard or numeric keypad) |
| Cycle to the next mode | Click the mode name on the HUD |
| Cycle the HUD theme | Click the JET PRO title |
| Collapse / expand the HUD | Click [-] / [+] |
| Switch the chart timeframe | Click a squadron box |
| Switch the chart symbol | Click a symbol in the scanner |
The mode and theme are remembered per chart, also after a timeframe change. Hotkeys can be turned off with EnableHotkeys if they clash with other tools.
Themes: Cyan (default), Night-Vision Green, Amber, Stealth Gray and Custom (your own colors from the HUD settings).
11. Settings reference
All settings with their defaults, grouped as in the indicator's Inputs tab.
Signal engine
| Setting | Default | What it does |
|---|---|---|
| SignalMode | Cruise | Start mode (also switchable live) |
| TradeDirection | All signals | All, BUY only or SELL only |
| MinBodyATRRatio | 0.5 | Minimum signal-candle size × ATR |
| ATRPeriod | 14 | ATR period |
| SLBufferATRMultiplier | 1.0 | Extra SL distance × ATR |
| PinBarWickRatio | 0.6 | Intercept: minimum wick share of the pin bar (higher = stricter) |
| PinBarMaxBodyRatio | 0.35 | Intercept: maximum body share of the pin bar (lower = stricter) |
| DonchianLookback | 20 | Stealth: channel length in candles |
| SignalsOnCandleClose | true | Closed candles only (no repainting) |
| MaxBarsToScan | 500 | Candles of history processed |
| InvalidationCloses | 3 | Closes beyond SL in a row that end a signal |
| MaxBarsSinceSignal | 150 | Maximum signal age in candles |
Signal filters
| Setting | Default | What it does |
|---|---|---|
| UseHTFFilter | false | Only signals with the higher-timeframe trend |
| HTFTimeframe | H4 | HTF filter and HTF grade check timeframe |
| HTFMAPeriod | 50 | HTF EMA period (also used by the attitude indicator) |
| UseSessionFilter | false | Only signals inside the session hours |
| SessionStartHour | 7 | Session start, server time |
| SessionEndHour | 20 | Session end, server time (exclusive) |
| MaxSpreadPips | 0 | Spread guard for new-signal alerts (0 = off) |
Chart
| Setting | Default | What it does |
|---|---|---|
| ShowZones | true | Risk and reward zones |
| ZoneRiskColor / ZoneRewardColor | dark red / dark green | Zone colors |
| ShowLevelLines | true | Entry, SL, TP lines with price labels |
| LevelExtendBars | 15 | Candles the levels extend to the right |
| BullColor / BearColor | cyan / pink | BUY and SELL colors |
| SLColor / EntryLineColor | red / light blue | SL and entry line colors |
| ArrowUpCode / ArrowDownCode | 233 / 234 | Wingdings arrow symbols |
| PaintChart | true | Cockpit chart colors (restored on removal) |
| ChartBackColor, ChartGridColor, ChartAxisColor | dark navy / teal | Painted background, grid, scales |
| CandleBullColor / CandleBearColor | cyan / pink | Candle colors |
| ChartVolumeColor | dark cyan | Volume color |
| PowerCandles | true | Power candles on / off |
| PowerWeakATR / PowerStrongATR / PowerImpulseATR | 0.35 / 0.70 / 1.10 | Brightness levels × ATR |
| ShowTargetLock | true | Crosshair on the signal candle |
| ShowRunwayLights | true | Lights on TP lines |
| AutopilotMode | Step | Off, Step or Wide |
| AutopilotColor | amber | Autopilot line color |
Alerts
| Setting | Default | What it does |
|---|---|---|
| EnableAlerts | true | Popup + sound on a new signal |
| EnablePush | true | Push notifications to the mobile app |
| EnableTradeAlerts | true | TP reached, SL warning, autopilot stop hit |
| AlertSoundFile | alert.wav | Sound file from the terminal's Sounds folder |
HUD
| Setting | Default | What it does |
|---|---|---|
| ShowHUD | true | Show the HUD |
| HudTagline | TACTICAL MARKET SCANNER | Line under the title |
| HudTheme | Cyan | Color theme (click the title to cycle) |
| EnableHotkeys | true | Keys 1–4 switch mode |
| HudCorner | 0 | 0 top-left, 1 top-right, 2 bottom-left, 3 bottom-right |
| HudX / HudY | 10 / 12 | Distance from the chart edges (pixels) |
| HudWidth | 330 | HUD width (pixels) |
| HudFont / HudFontSize | Consolas / 9 | HUD font |
| HudColor … HudWarnColor, HudBackdropColor | – | Custom theme colors |
| HudProfitColor / HudLossColor / HudHitColor | green / red / gold | Profit, loss and reached-target colors |
| HudBackdrop | true | Dark panel behind the HUD |
| HudAnimate | true | Scan line, blinking lock banner and crosshair |
| ShowInstruments | true | Attitude indicator + thrust meter |
| AttitudeTimeframe | H4 | Attitude indicator timeframe |
| ShowRTape | true | R-tape and readouts |
| ShowFilterRow | true | Filter status row |
| TrendMAPeriod | 200 | EMA for the TRD check and TREND readout |
| RiskPercent | 1.0 | Balance % for the RISK and LOTS readouts |
Squadron and scanner
| Setting | Default | What it does |
|---|---|---|
| ShowSquadron | true | Squadron panel |
| SquadronTFs | M5,M15,M30,H1,H4,D1 | Up to 6 timeframes |
| ShowScanner | true | Scanner panel |
| ScannerSymbols | EURUSD,GBPUSD,USDJPY,AUDUSD,XAUUSD | Symbols, exact broker names |
| ScannerTimeframe | Current | Scanner timeframe |
| ScannerRefreshSec | 5 | Refresh interval in seconds |
| ScannerAlerts | false | Alert on new scanner signals |
| ScannerClickAction | Switch | Switch chart, new chart with template, or new empty chart |
| ScannerTemplate | JetPRO.tpl | Template for new charts |


