Grid ADX Wilder EA
- 专家
- 版本: 3.15
- 激活: 5
Run it free before anything else: open Grid ADX Wilder EA in the Strategy Tester, turn on visual mode and watch the panel read trend strength, place each level and bank each closure live on the chart.
A TREND-STRENGTH GRID THAT WAITS FOR DIRECTION TO BE CONFIRMED BEFORE IT BUILDS A SINGLE LEVEL.
Grid ADX Wilder EA lets the classic Wilder directional system decide when a cycle may begin, then hands the position to a full grid management engine that keeps closing the oldest exposure piece by piece.
In short
- Entry comes from a +DI / -DI cross that only counts when ADX sits inside a strength band you choose.
- The Rising-ADX Guard ignores crosses while the trend is losing energy.
- Profits are banked in groups of oldest and newest orders, with partial slices when a whole old order is too heavy.
- No stop loss and no forced close-all; protection blocks new levels instead of dumping the book.
- Hedging and netting accounts are both supported, with every limit visible as an input.
----------
START HERE
Symbol ideas: EURUSD or XAUUSD. Timeframe: H1 is a calm first choice. Lot: keep the default 0.01 with the additive ladder. Mode: start on Scan only, watch the plans on the panel, then switch to Armed. Test on your own broker's data first, because spreads, swaps and commissions differ.
----------
Why it carries Wilder's name
J. Welles Wilder built the Directional Movement system to answer two separate questions: which side is in control, and how strong is that control. Most grids ignore both and simply start wherever price happens to be. This EA asks both questions before it commits. The directional lines tell it which side to arm, and the ADX line tells it whether the move is real enough to be worth a cycle, or so stretched that it is better left alone.
What is new
The new Rising-ADX Guard accepts a directional cross only while ADX is climbing on the signal bar, so a cross that appears inside a fading trend no longer starts a cycle. The panel gains an ADX LENS row that labels the current strength band as WEAK, TREND or EXHAUSTED and shows whether the guard is open or holding. Margin-level timeframe safety is also included and is switched off by default.
----------
The life of one cycle
1. The reading. On every closed bar the EA reads ADX, +DI and -DI from the built-in ADX Wilder indicator. Nothing is taken from the forming candle, so the signal never repaints.
2. The cross. A BUY cycle is considered when +DI crosses above -DI; a SELL cycle when -DI crosses above +DI. The cross must also leave a minimum gap between the two lines, so a hair-thin touch is ignored.
3. The strength check. ADX must be above your minimum level, proving there is a trend at all, and below your maximum level, so the EA does not arrive late to a move that is already exhausted. With the Rising-ADX Guard on, ADX must also be rising on that bar.
4. The optional trend filter. An EMA can confirm the side: trade only with the EMA, trade only against it as a fade, or ignore it.
5. The spacing. A quiet bar gap between accepted signals keeps a choppy session from firing a burst of new cycles, and a signal can stay valid for a few bars if a level could not be placed at once.
6. The ladder. Levels open at a fixed or ATR-based distance, with a floor, a ceiling and an option to freeze the distance for the whole cycle. BUY and SELL grids can run side by side or one at a time.
7. The harvest. The closer looks for groups made of the oldest and newest orders and closes the group the moment the combined result clears your target after swap and commission. When the oldest order is still too heavy, only a slice of it is closed, paid for by profit already on the table.
8. The guard. A reopen guard refuses any closure that would immediately reopen the same level. Every leg is verified against the deal history, failed legs go to a retry queue, and a plan is dropped if the book changes between the scan and the send.
9. Optional hedge cycle. Off by default. When enabled it keeps a balanced pair on a symbol you choose and retires it in equal slices funded by a small surcharge on closures the grid already makes.
----------
The panel
The panel sits on the left and leaves the right side and the price scale clean. It shows symbol and magic number, a status pill (ARMED, SCAN ONLY or PAUSED), grid mode, lot step, spacing, banked profit, the book in lots and net result, the closing plan for each side with its own close button, the order list, an ADX PULSE row with the live readings and the ADX LENS row with the strength band and guard state. Buttons switch Armed / Scan only, Pause / Resume, chart marks and slicing. It can be dragged and minimised, adapts to the screen, and draws nothing in a non-visual backtest so optimisation stays fast.
----------
Safety you control
No stop loss and no forced close-all: when limits are reached, new levels are blocked while existing orders keep being managed.
The money check asks one plain question before every order: is there enough free margin, with a buffer, for this order?
Caps on levels per grid, orders per side and lot per order keep the ladder bounded, and the lot ladder stops growing at the level limit.
On netting accounts the margin of the merged position is kept within a percentage of equity.
Optional margin-level timeframe safety: when the margin level falls to the levels you set, the EA moves its working timeframe up so signals arrive less often, and it steps back only after margin recovers past a hysteresis cushion. Off by default.
Scan only mode shows every decision on the panel without sending a single order.
----------
Every setting explained
Grid - how levels are opened
Trade mode - dual grid by default (BUY and SELL side by side) or a single direction.
Grid space between levels - fixed distance in points (25) when ATR spacing is not used.
Spacing multiplier per level - 1.0 keeps levels evenly spaced; higher values widen deeper levels.
Maximum levels per grid - upper bound on levels in one grid (1000).
An up move arms the BUY side - sets which side an upward move belongs to.
Magic number for the grid orders - identifies this EA's orders (9754210).
Comment on the grid orders - text written on each grid order.
One order per bar - at most one new level per bar.
Lot ladder
Starting lot - first level volume (0.01).
Lot sizing mode - additive by default, or multiply.
Lot multiplier - in multiply mode, each level is the previous lot times this (1.25).
Lot add step - in additive mode, volume added per level (0.01; 0 means the starting lot).
Maximum lot for any single order - hard ceiling per order (1.0).
Auto lot - scales the starting lot with balance (off).
Auto lot reference balance - balance that matches the starting lot (1000).
Allow scaling down - lets auto lot go below the starting lot (off).
ATR spacing
Spacing mode - ATR by default, or fixed points.
ATR timeframe and ATR period - where and how volatility is measured (current chart, 14).
ATR spacing factor - distance equals ATR times this (1.0).
ATR bar shift - 1 uses the last closed bar.
ATR spacing floor and ceiling - minimum and maximum distance in points (50 and 5000; 0 means none).
Freeze ATR spacing for the cycle - keeps one distance for the whole cycle (off).
Profit target
Desired profit per closure - base target in account money (2.0).
Final profit multiplier - scales the target from 1.00 to 2.00.
Profit target mode - scaled by default, so larger and deeper books need a larger result.
Volume exponent - how strongly closing volume raises the target (1.0; 0 turns it off).
Depth bonus - extra target per additional open level (0.10).
Maximum multiple - ceiling on the scaled target as a multiple of the base (50).
Reach cap - limits the target to a fraction of one grid step so it stays reachable (0.50).
Fragment scanner
Multi-leg scan - checks combinations of several orders before the plain pair (on).
Max oldest legs and max newest legs - group size limits (3 and 6).
Scan priority - ranks qualifying groups, most orders first by default.
Never bank less than the pair - a group must also clear the plain pair target (on).
Closing volume must exceed target volume - newest volume must outweigh the oldest (on).
Minimum closing to target volume ratio - 1.5 by default.
Target slicing - partial closes
Enable slicing - closes a slice of the oldest order when the whole lot is out of reach (on).
Profit weight power - how profit is weighted per closing lot (1.5).
Smallest slice - minimum slice as a percent of the target order (20).
Allow several closers - lets several newest orders combine to fund one slice (on).
Prefer full closure - a full closure always wins over a slice when both qualify (on).
Reopen guard
Reopen guard mode - blocks closures that would immediately reopen a level (step based).
Guard cushion - safe distance as a fraction of one grid step (0.90).
Account protection
Minimum margin level - blocks new levels below this margin level percent (0 = off).
Maximum floating loss - blocks new levels above this loss as a percent of balance (0 = off).
Netting margin cap - maximum margin of the net position as a percent of equity (5.0).
Maximum orders per side - absolute order cap (1000).
Execution and verification
Run mode - Armed or Scan only; Scan only is the gentle way to begin.
Leg send order - oldest first by default.
Maximum slippage - 30 points.
Maximum spread - trading pauses above this spread (7500 points).
Seconds between closures - minimum pause between two closures per side (5).
Attempts per leg - sends before a leg moves to the retry queue (3).
Verify timeout - how long a stuck leg keeps being checked (90 seconds).
Wait when the market is closed - waits for the session instead of halting (on).
Market closed retry - retry interval while orders are refused (30 seconds).
Auto resume - clears a halt automatically after this many seconds (300; 0 waits for the panel).
Partial close retry - retries partial closes this many minutes after a broker refusal (15; 0 never).
Abort if the book changed - drops a plan if a leg changed between scan and send (on).
Full commission - counts commission for both sides (on).
Commission per lot - fallback value when history has none (0 reads it from history).
Closing comment - text written on closing deals.
Hedge cycle
Enable hedge cycle - off by default.
Hedge symbols - comma-separated list; repeating a symbol gives it more turns (XAGUSD).
Symbol rotation - how the next cycle symbol is chosen (per cycle).
Tester symbol cap - limits rotation in the Strategy Tester only (2; 0 means no cap).
Cycle lots and slice lots - lots per side and lots retired per slice (0.01 each).
Fragment bonus and bonus is percent - extra amount on top of the slice cost, as a percent by default (100).
Maximum surcharge in money and in percent - caps on how much one closure target may be raised (0 = no money cap, 50 percent).
Hedge magic number - must differ from the grid (9754211).
Reopen on finish - starts a fresh cycle when one ends (on).
Start requires a trade - waits for the grid to open something first (on).
Integrity check interval - verifies both legs every few seconds (5).
Auto repair and naked leg action - repairs a lone leg by re-hedging (on).
Hedge spread, slippage, attempts, verify timeout, commission and comment - execution controls for the hedge legs, mirroring the grid ones.
Weekly cash day
Weekly cash day - no new hedge cycle and no slice over your withdrawal window (off).
Cash day of week - 0 Sunday, 1 Monday and so on (1).
Cutoff hour - server hour after which no new slice is fired (21).
Panel and chart
Show panel, X and Y offsets, font size and corner - placement and size of the panel.
Show Arabic line - adds an Arabic line under the English (on).
Show chart marks - draws plans and levels on the chart (on).
Max table rows - order rows shown per grid (13).
Entry trigger
Entry trigger mode - the ADX strategy arms the first level by default.
Signal bar - 1 means the last closed bar.
Bars between accepted signals - 30 by default (0 accepts every signal).
Signal valid bars - a signal stays usable for this many bars (3).
Allow BUY and allow SELL - enable each direction separately.
Reverse signal - inverts the direction (off).
ADX Wilder - the signal
ADX period - smoothing length of the Wilder calculation (14).
Minimum ADX - a cross counts only above this strength (20).
Maximum ADX - a cross is skipped above this level because the move is already stretched (60; 0 = off).
Minimum DI gap - required distance between +DI and -DI on the signal bar (1.0).
Trend filter - 0 off, 1 trade with the EMA side, 2 trade against it as a fade.
Trend filter EMA period - 200.
Rising-ADX Guard - ADX must be rising on the signal bar (on).
Signal arrows - marks candles where a signal armed a cycle (on).
Margin timeframe safety
Use margin TF safety - off by default.
Level 1 margin percent and timeframe - at or below 6000 percent, work on M15.
Level 2 margin percent and timeframe - at or below 5000 percent, work on H1.
Hysteresis - margin must recover this far above a level before stepping back (500).
Debug
Debug mode - verbose journal logging (off).
----------
Honest expectations
A grid manages a position; it does not see the future. Grid ADX Wilder EA is careful about when a cycle starts and works steadily to keep each cycle short and each old order shrinking, but a long one-way trend can still hold the book open for a while. Pick a lot your account can carry through that, test on your own broker first, and let the Strategy Tester show you its rhythm before going live. Works on any symbol and timeframe, with no DLLs and no extra files.
If you use it, an honest review of how it behaved on your account helps other traders decide, whether your experience was good or not.
