JET Wave Momentum (Free + PRO): momentum oscillator with a signal line and overbought and oversold levels

22 November 2026, 16:10
JETINVEST
0
18

JET Wave Momentum is a new momentum oscillator for MetaTrader 5. In a separate window it shows a fast line and a signal line that follow the momentum of price, with two overbought and two oversold levels. It comes in two editions: JET Wave Momentum, free, with the two lines and the levels on fixed settings, and JET Wave Momentum PRO, which adds highlighted crossings, confirmed divergences, a histogram, editable settings, calculation on a higher timeframe, a 4-timeframe panel, alerts and data for Experts.

How it works

The fast line and the signal line move between the overbought zone at the top of the window and the oversold zone at the bottom. In the upper zone, momentum is stretched up; in the lower zone, it is stretched down. When the fast line crosses the signal line, momentum is turning.

Crossings. The PRO version marks each crossing of the two lines with a dot on the signal line: green for a crossing up, red for a crossing down. A crossing up inside the oversold zone, or a crossing down inside the overbought zone, is a crossing beyond the levels and gets a larger dot.

Divergences. When price makes a new low but the fast line makes a higher low, the PRO version draws a bullish divergence line (green); when price makes a new high but the fast line makes a lower high, a bearish divergence line (red). The line is drawn in the indicator window and, optionally, on the price chart. A divergence appears only after it is confirmed, a few bars after the turn, and its line never moves afterwards.

Crossings and divergences are evaluated on the closed bar and do not repaint: in the Strategy Tester, the values of closed bars never changed. The forming bar keeps updating until it closes. It is an indicator only: it never opens, closes or changes orders.

Free or PRO?

FreePRO
Fast line and signal line in a separate windowyesyes
Two overbought and two oversold levels, plus the zero lineyesyes
Editable calculation settings and levels—yes
Histogram—yes
Crossing dots: all, only beyond the levels, or none—yes
Confirmed divergences in the indicator window and on the price chart—yes
Calculation on a higher timeframe—yes
Editable colors—yes
Panel with 4 timeframes, dark / light / automatic theme, 11 languages—yes
Alerts: popup, sound, push notification, e-mail—yes
Data for Experts (iCustom buffers)—yes

The free version has no inputs: it uses the default values of the PRO version, works only on the chart timeframe and uses dark colors. The zones beyond the outer levels are shaded (red above, green below), and a small note in the window reminds you of what the PRO version adds. It has no panel, no alerts of any kind and no data for Experts.

What you see in the PRO version

  • Fast line (green), dotted signal line (red) and histogram (gray), which can be turned off.
  • Two overbought and two oversold levels, plus the zero line.
  • Crossing dots on the signal line: all crossings, only those beyond the levels, or none. Crossings beyond the levels also get a larger dot.
  • Bullish (green) and bearish (red) divergence lines in the indicator window and, optionally, on the price chart.
  • State panel with 4 timeframes (M15, H1, H4 and D1 by default).

Settings and timeframes

Calculation

  • Channel length (2-200), Average length (2-200) and Signal length (1-50): shorter values make the lines react sooner and cross more often; longer values make them smoother. The defaults are 10, 21 and 4.
  • Overbought level 1 and Overbought level 2 (60 and 53 by default), Oversold level 1 and Oversold level 2 (-60 and -53 by default). Level 1 is the outer level and level 2 the inner one. The order must be Overbought level 1 above Overbought level 2, both above zero, and Oversold level 2 above Oversold level 1, both below zero; otherwise the indicator uses the defaults and writes a message in the Experts log.
  • Bars to calculate (500-50000): 5,000 by default.
  • Timeframe of the calculation (current or higher): for example H1 on an M5 chart. The lines, crossings and divergences then come from that timeframe.

Signals

  • Crossings shown: All (default), Only beyond the levels, or None. Only the dots change; the data for Experts and the alerts stay the same.
  • Show divergences (on by default).
  • Divergence: bars left of a turn (2-20) and Divergence: bars right of a turn (1-10): how many bars must stay on each side of a top or bottom of the fast line for it to count as a turn. More bars on the right confirm the divergence later and leave fewer, larger turns.
  • Divergence: maximum bars between turns (10-300): two turns farther apart than this are not compared.
  • Divergence lines also on the price chart (on by default).

Display

  • Show histogram (on by default).
  • Colors: Fast line, Signal line, Histogram, Up crossing / bullish divergence and Down crossing / bearish divergence.

Nothing is recalculated backwards: crossings and divergences change only when a bar closes.

Alerts on the closed bar

  • Four alerts in the group Alerts (closed bar), each with its own mode: Any crossing, Crossing beyond the levels, Entered overbought / oversold and Divergence confirmed.
  • Modes: Off, Popup, Sound, Smartphone notification, Popup + Sound, Notification + Sound, Popup + Notification, or Popup + Sound + Notification. Sound chooses the sound file (alert2 by default); Also by e-mail sends the alerts by e-mail too (off by default).
  • By default, only Crossing beyond the levels is on (Popup + Sound). A crossing beyond the levels triggers only that alert, not two.
  • Entered overbought / oversold fires when the signal line enters the zone beyond the outer level (level 1).
  • The messages are in the panel language, for example "Up crossing in the oversold zone", "Down crossing in the overbought zone", "Entered the overbought zone" or "Bullish divergence confirmed".

Data for Experts (iCustom)

  • Buffer 0: fast line
  • Buffer 1: signal line
  • Buffer 2: histogram
  • Buffer 3: crossing on this bar (+2 = up beyond the levels, +1 = up, 0 = none, -1 = down, -2 = down beyond the levels)
  • Buffer 4: zone (+2 / +1 = overbought, 0 = neutral, -1 / -2 = oversold; 2 = beyond the outer level)
  • Buffer 5: divergence confirmed on this bar (+1 = bullish, -1 = bearish, 0 = none)
  • Signals (buffers 3 and 5) are valid on closed bars (index 1 or higher) and stay 0 on bar 0; buffers 0, 1, 2 and 4 update with each tick.
  • With a higher timeframe, the values come from the last closed bar of that timeframe, mapped to the chart bars; a signal shows on the first chart bar after that bar closes.

Panel (PRO)

  • Four timeframes (Panel timeframe 1 to Panel timeframe 4: M15, H1, H4 and D1 by default). Each row shows, for the last closed bar of its timeframe, a colored dot and the state: "Overbought" (red dot), "Oversold" (green dot) or "Neutral" (gray dot), followed by ▲ when the fast line is above the signal line or ▼ when it is below. After a crossing in the last 3 bars of that timeframe, the row shows "Turned up" or "Turned down" instead. On the right, the current value of the fast line.
  • Right after the indicator is attached, a row may show "Loading..." for a few seconds while the terminal prepares that timeframe. If the terminal does not have enough history for it, the row shows "No history" with the bars available / needed instead of waiting without end.
  • Title bar buttons: [–] collapses the panel to its title bar, [A-] / [A+] resize it from 60% to 200%, [X] removes the indicator with all its objects. The size and the collapsed state are saved for each chart. The panel can be dragged and always stays whole inside the chart.
  • Panel size (60-200 %): starting size (100 by default). Theme: Dark (default), Light or Automatic (chart background). Show the panel turns it off.
  • Language: Terminal language (default) or one of 11 languages: English, Português, Español, Русский, Deutsch, Français, Italiano, 中文, 日本語, 한국어 and Türkçe. The panel texts and the alert messages follow this choice.

Programmatic use (PRO)

The last group of inputs, PROGRAMMATIC USE, is meant for Experts and dashboards that read the indicator through iCustom, often on many symbols at once. The default values keep the normal behavior.

  • Draw graphics (true by default): with false, nothing is drawn on the chart (lines, dots, divergence lines and panel). The data for Experts and the alerts stay the same.
  • Max bars to draw (0 = all): crossing dots and divergence lines only on the last N bars. The data for Experts does not change.
  • Max bars to calculate (0 = all): the calculation covers only the last N bars; before them the buffers are empty.
  • These inputs are at the end of the list, so the positions of the other inputs in an iCustom call do not change. Each input group also counts as one position in iCustom.

Works on any symbol and timeframe

  • Forex, indices, stocks, metals, crypto and futures, such as the B3 mini index or CME index futures, with any broker.
  • Any chart timeframe; the panel and the higher-timeframe calculation read the other timeframes directly from the terminal.

Download

Questions and suggestions: send me a private message through my MQL5 profile.