JET Squeeze Momentum (Free + PRO): volatility compression and four-color momentum

22 November 2026, 16:06
JETINVEST
0
17

JET Squeeze Momentum is a new indicator for MetaTrader 5 that shows, in a separate window, when volatility is compressed and the strength and direction of momentum in a four-color histogram. It comes in two editions: JET Squeeze Momentum, free, with the histogram and the compression dots in one level and fixed settings, and JET Squeeze Momentum PRO, which adds three compression levels, release signals and arrows, editable settings, calculation on a higher timeframe, a 4-timeframe panel, alerts and data for Experts.

How it works

JET Squeeze Momentum works in its own window below the price chart. A row of dots on the zero line shows the state of volatility: gray when there is no compression, colored while the market is compressed. The histogram shows momentum: above zero when it pushes up, below zero when it pushes down, in four colors: bright green = up and rising, dark green = up and falling, bright red = down and falling, dark red = down and rising.

Compression and release. A compression starts when volatility contracts and ends when it expands again. In the PRO version, when a compression that lasted at least a set number of bars ends (Minimum compression bars before a release, 3 by default), the indicator marks a release in the direction of momentum: up when the histogram is above zero, down when it is below. The release appears in the panel, in the alerts, in the data for Experts and, if you turn them on, as an arrow on the price chart. Compression can be shown in one level (orange) or in three levels: yellow = light, orange = medium, red = strong.

Signals are evaluated on the closed bar and do not repaint: once a release is marked, it never moves or disappears. The forming bar keeps updating until it closes. It is an indicator only: it never opens, closes or changes orders.

Free or PRO?

FreePRO
Momentum histogram in four colorsyesyes
Compression dots on the zero line, one levelyesyes
Values on the closed bar, no repaintingyesyes
Three compression levels: light, medium and strong—yes
Release signals with a minimum number of compression bars—yes
Release arrows on the price chart (optional)—yes
Editable calculation settings and colors (Free: fixed default values, dark colors)—yes
Calculation on a higher timeframe (Free: chart timeframe only)—yes
Panel with 4 timeframes, dark / light / automatic theme, 11 languages—yes
Alerts: popup, sound, push notification, e-mail—yes
Data for Experts (iCustom buffers)—yes

The free version shows the histogram and the compression dots (amber = compression, gray = no compression) with the default values of the PRO version, on an automatic scale centered on zero. A small note in the window reminds you of what the PRO version adds.

JET Squeeze Momentum PRO shows the same histogram and compression dots and adds release signals, three compression levels, calculation on a higher timeframe, a 4-timeframe panel, alerts and data for Experts.

  • Momentum histogram in four colors: up and rising, up and falling, down and falling, down and rising.
  • Compression dots on the zero line: gray = no compression; one level (orange) or three levels (yellow = light, orange = medium, red = strong).
  • Release on the closed bar, in the direction of momentum, only after a compression of at least the minimum number of bars.
  • Optional arrows on the price chart at each release: up arrow below the bar, down arrow above the bar. They stay on the chart while the indicator is on it.
  • State panel with 4 timeframes: compression with the number of bars, a recent release, or the direction of momentum with "weakening" when it loses strength.

Settings and timeframes

The inputs are in four groups, Calculation, Display, Panel and Alerts (closed bar), followed by PROGRAMMATIC USE (see below).

  • Compression levels: 1 level (default) or 3 levels (light, medium and strong compression).
  • Range channel width (1 level): how easily a compression is marked in the one-level mode. A higher value marks compression more often; a lower value marks only the tighter ones. In the three-level mode, Range channel width, light compression (3 levels), Range channel width, medium compression (3 levels) and Range channel width, strong compression (3 levels) do the same for each level. The light level is always the widest and the strong level the narrowest: if the three values are out of order, the indicator sorts them.
  • Volatility band length, Volatility band width (deviations), Range channel length, Range channel measure and Range channel middle: fine-tuning of the compression detection. A higher Volatility band width (deviations) marks fewer compressions. The default values suit most symbols and timeframes.
  • Momentum length: longer values give a smoother, slower histogram; shorter values a faster one.
  • Minimum compression bars before a release (3 by default): a release counts only after at least this many bars in a row in compression; shorter compressions end without a release.
  • Bars to calculate (500-50000): 5,000 by default.
  • Timeframe of the calculation (current or higher): for example H1 on an M5 chart. The histogram and the dots then come from the closed bars of that timeframe and change in steps, once per bar of that timeframe.
  • Display: colors of the four histogram states (Momentum up, rising, Momentum up, falling, Momentum down, falling, Momentum down, rising) and of the dots (No compression, Light compression (3 levels), Compression / medium compression, Strong compression (3 levels)), and Release arrows on the price chart (off by default).

Alerts on the closed bar

  • Compression started, Compression released, Momentum crossed zero and Momentum losing strength, each with its own mode: Off, Popup, Sound, Smartphone notification or a combination (Popup + Sound, Notification + Sound, Popup + Notification, Popup + Sound + Notification).
  • Sound: the terminal sound played (alert2 by default). Also by e-mail: sends the same alerts by e-mail too (off by default; it uses the e-mail settings of the terminal).
  • By default, only Compression released is on (Popup + Sound).
  • The message says what happened, for example "Compression released up" or "Momentum crossed below zero", in the language of the interface. Each alert fires once, when the bar closes.

Data for Experts (iCustom)

  • Buffer 0: momentum
  • Buffer 1: momentum state (0 = up and rising, 1 = up and falling, 2 = down and falling, 3 = down and rising)
  • Buffer 2: zero level of the compression dots (always 0; drawing only)
  • Buffer 3: compression state (0 = none; 1 = light, 2 = medium, 3 = strong; with one level: 0 or 2)
  • Buffer 4: consecutive bars in compression
  • Buffer 5: release on this bar (+1 = up, -1 = down, 0 = none)
  • Buffer 6: momentum crossed zero on this bar (+1 = up, -1 = down, 0 = none)
  • Buffer 7: width ratio (above 0; below 1 = compressed)
  • Signals (buffers 5 and 6) are valid on closed bars (index 1 or higher) and stay 0 on bar 0; the other buffers update with each tick.
  • With a higher timeframe, the values come from the last closed bar of that timeframe, mapped to the chart bars; a signal shows on the first chart bar after that bar closes.

Panel (PRO)

  • Four timeframes (M15, H1, H4 and D1 by default, editable with Panel timeframe 1 to Panel timeframe 4). Each row shows, with a colored dot, the state on the last closed bar of that timeframe.
  • During a compression: "Compression" and the number of bars in compression (for example "8 b"); with 3 levels, "Light compression", "Medium compression" or "Strong compression".
  • Right after a release: "Released up" or "Released down", highlighted in green or red, for 3 bars of that timeframe.
  • Otherwise: "Momentum up" or "Momentum down", with an arrow ▲ / ▼ when momentum is rising or falling, and "weakening" when it loses strength.
  • The footer shows the levels in use ("Levels: 1" or "Levels: 3") and, with a higher timeframe of calculation, that timeframe.
  • Right after the indicator is attached, a row may show "Loading..." for a few seconds while the terminal prepares that timeframe. If the terminal does not have enough history for it, the row shows "No history" with the bars available / needed instead of waiting without end.
  • Title bar buttons: [–] collapses the panel to its title bar, [A-] / [A+] resize it from 60% to 200% (Panel size (60-200 %)), [X] removes the indicator with all its objects. The size and the collapsed state are saved for each chart. The panel can be dragged and always stays whole inside the chart.
  • Theme: Dark (default), Light or Automatic (chart background). Language: Terminal language (default) or one of 11 languages. Show the panel: false hides it.

Programmatic use (PRO)

The last group of inputs, PROGRAMMATIC USE, is meant for Experts and dashboards that read the indicator through iCustom, often on many symbols at once. The default values keep the normal behavior.

  • Draw graphics (true by default): with false, nothing is drawn on the chart (histogram, dots, arrows and panel). The data for Experts and the alerts stay the same.
  • Max bars to draw (0 = all): compression dots and arrows only on the last N bars. The data for Experts does not change.
  • Max bars to calculate (0 = all): the calculation covers only the last N bars; before them the buffers are empty.
  • These inputs are at the end of the list, so the positions of the other inputs in an iCustom call do not change. Each input group also counts as one position in iCustom.

Works on any symbol and timeframe

  • Forex, indices, stocks, metals, crypto and futures from any exchange (B3, CME and others), with any broker.
  • Any timeframe, from M1 to MN1.

Download

Questions and suggestions: send me a private message through my MQL5 profile.