CurrencyStrength MTF 28 Pair Analyzer — Full User Manual (MT5)

20 November 2026, 13:42
Keiichi Ushiroda
0
6
CurrencyStrength MTF 28 Pair Analyzer — Full User Manual (MT5)

English Edition | Version 1.00 | MetaTrader 5

This guide explains installation, the eight-currency strength display, 28-pair analysis, multi-timeframe (MTF) conditions, chart markers, alerts, settings, and troubleshooting. It is intended for the MQL5 Market edition of CurrencyStrength.

Product page: CurrencyStrength on MQL5 Market.

Important: CurrencyStrength is an analytical aid for discretionary trading. It does not place trades and does not guarantee results. A BUY/SELL arrow shows that configured analysis conditions have been met; an X mark indicates that an active condition state has ended. Neither marker is an instruction to open or close a position.

Contents

  1. Introduction and system requirements
  2. Install and get started
  3. Understand the display and panels
  4. How the signal conditions work
  5. Alerts, push notifications, and CSV logging
  6. Practical workflows
  7. Complete input parameter reference
  8. Free Market demo
  9. Important usage notes
  10. Troubleshooting and frequently asked questions
  11. Disclaimer, support, and version information

1. Introduction and System Requirements

1.1. What CurrencyStrength does

CurrencyStrength measures the relative strength of USD, EUR, GBP, JPY, CHF, CAD, AUD, and NZD. It analyzes the 28 foreign-exchange pairs formed by these eight currencies and displays eight strength scores on a scale of 0 to 100.

The indicator combines currency strength lines, an eight-currency ranking, a 28-pair ranking, higher-timeframe direction analysis, condition-based markers, and optional notifications. A single chart can be used to monitor conditions across the 28 supported pairs.

1.2. What signals mean — please read

  • A blue upward arrow indicates that BUY-direction strength conditions have been satisfied.
  • A red downward arrow indicates that SELL-direction strength conditions have been satisfied.
  • A gray X indicates cancellation of a previously active condition state, usually because the currency-strength difference has narrowed.
  • These markers are not entry or exit instructions. They are not measures of profit or loss. Use your own chart analysis, position sizing, and risk management.

1.3. Requirements

Requirement Details
Platform MetaTrader 5 desktop for Windows (not MetaTrader 4).
Market data All 28 supported Forex pairs must be available from the broker; sufficient price history is required.
Analysis timeframes M1 through D1. On W1 or MN1 charts, the indicator uses D1 for signal analysis.
Symbols The indicator searches for common broker prefixes and suffixes automatically; manual override is available.
Historical data The first launch can take longer while the terminal downloads history for multiple symbols.
Multiple charts One chart can monitor all 28 pairs. Additional instances can increase CPU/memory use.

2. Installation and First Launch

2.1. Install the Market product

  1. Open MetaTrader 5 and sign in to the MQL5 account used to purchase or rent the product.
  2. Install CurrencyStrength through the Market section of the terminal. The Market manages the installation and licensing.
  3. Open a supported Forex chart, such as USDJPY M5 or EURUSD M15.
  4. Find CurrencyStrength in the Navigator, attach it to the chart, and review the Inputs tab. The defaults are suitable for an initial test.
  5. Confirm the settings to start the indicator.

Market edition note: You do not need to copy a separately delivered EX5 file into the Indicators folder. These steps replace the manual file-copy installation described in the original Japanese distribution guide.

[[INSERT IMAGE 01: English MT5 indicator input window — Timeframes and Signal conditions]]

2.2. Wait for history synchronization

CurrencyStrength requests price history for all 28 Forex pairs, including pairs not currently open as charts. The first initialization may take from several seconds to longer, depending on the terminal, server, and available history. Switching symbols or timeframes may trigger additional loading.

Check E: STATUS in the main panel and the status label in the indicator subwindow. When the panel displays READY, the indicator is operating normally. A loading or waiting state means the required data has not yet become available.

2.3. Chart history settings

In the desktop terminal, open Tools > Options > Charts and check Max bars in chart. The original manual recommends at least 100,000 or an unlimited setting, when available, to avoid insufficient history for long lookbacks. If the terminal reports insufficient history, increase the limit and reattach the indicator after history is downloaded.

2.4. First-launch checklist

  • The selected broker provides all 28 required Forex pairs.
  • History loading has completed and the status is READY.
  • The main panel and eight currency lines are visible.
  • The current chart is a supported Forex pair if you want pair-specific MTF data and chart markers.
  • The appropriate signal timeframe and notification target have been selected.

3. Understand the Display and Panels

3.1. Main chart and indicator subwindow

CurrencyStrength displays condition markers on the main price chart and a set of currency-strength lines in a separate indicator subwindow. The main information panel normally appears on the price chart; a separate CURRENCY panel controls line visibility in the indicator subwindow.

[[INSERT IMAGE 02: Full English MT5 chart — price markers, main panel, strength subwindow]]

3.2. Eight strength lines

Strength scores range from 0 to 100. 50 is a neutral reference level; 70 and 30 are optional upper and lower guide levels. Values above 50 indicate relative strength in the indicator model, and values below 50 indicate relative weakness. They do not represent order flow or guarantee a price move.

The two currencies of the current chart pair normally use thicker lines than the remaining currencies. If the signal timeframe is set higher than the displayed chart timeframe, the line may appear step-like because it is updated according to the signal timeframe.

Currency Default line color
USD LimeGreen
EUR DodgerBlue
GBP Red
JPY Gold
CHF Magenta
CAD Orange
AUD Aqua
NZD White

[[INSERT IMAGE 03: Eight strength lines and 70 / 50 / 30 reference levels]]

3.3. Arrows and X marks

Marker Meaning Chart placement
Blue upward arrow BUY-direction conditions were met. Below the marked candle.
Red downward arrow SELL-direction conditions were met. Above the marked candle.
Gray X The preceding active condition state ended. Near/above the marked candle.

Markers are drawn on the candle immediately following the completed signal-timeframe bar used for evaluation. Hovering over a marker can show related evaluation information such as timestamp, Gap, and MTF state. When displaying a higher signal timeframe on a lower chart, or vice versa, marker placement may appear unusual or several events may be grouped visually on one chart candle.

An X is not a trade-closing signal and does not forecast a reversal.

[[INSERT IMAGE 04: Real BUY/SELL arrows and X marks — English chart]]

3.4. CURRENCY sub panel and line controls

  • Click a currency row to show or hide that currency line. Hidden currencies appear dimmed.
  • Select All to display all eight currency lines.
  • Select Pair only to display just the two currencies of the current chart, such as USD and JPY on USDJPY.
  • Click CURRENCY to collapse or expand the controls.
  • Line-display preferences are normally retained while switching charts/timeframes, but may reset if you remove and reattach the indicator.

[[INSERT IMAGE 05: All / Pair only and individual line visibility]]

3.5. Main panel overview (A–E)

Click the heading of an A–E section to collapse or expand it. The open/closed indicator beside the heading changes to reflect that state. Font, size, color, position, and margins are adjustable.

Section Purpose
A: RANKING Ranks the eight currencies based on their latest completed signal-timeframe scores.
B: MTF Shows the selected chart pair, higher-timeframe Gap values and directions, agreement counts, Momentum, and signal state.
C: ACTIVE SIGNALS Lists Forex pairs whose indicator conditions are currently active, typically the top five by Gap magnitude.
D: PAIR RANKING Ranks the 28 Forex pairs and allows clicking a row to switch the current chart symbol.
E: STATUS Reports indicator status, evaluation time, and monitored notification-pair count.

[[INSERT IMAGE 06: English A–E main panel overview]]

3.6. Reading A: RANKING

A: RANKING sorts the eight currencies from strongest to weakest using the most recently completed signal-timeframe bar. Its heading also indicates the analysis timeframe and the evaluation timestamp.

3.7. Reading B: MTF

B: MTF identifies the chart pair and whether its signal state is waiting, BUY-active, or SELL-active. Each selected filter timeframe is listed with its own Gap and direction: BUY, SELL, or NEUTRAL. A tilde or similar marker may identify the use of a forming higher-timeframe candle when that option is selected.

The line MTF BUY 1/3 SELL 2/3 (need 2), for example, means that one of three filters agrees with the BUY direction, two of three with SELL, and two are required for the direction condition.

MOM is the momentum value based on how the Gap has expanded or contracted. The condition-status line shows which of the three requirements (Gap, MTF, Momentum) are currently met. An active signal state can display the Gap threshold used for cancellation, while a recently canceled state may show a re-signal cooldown.

[[INSERT IMAGE 07: Enlarged English B: MTF panel]]

3.8. Reading C: ACTIVE SIGNALS and D: PAIR RANKING

C: ACTIVE SIGNALS shows pairs with currently active BUY/SELL-direction condition states. Columns include pair name, direction, Gap, Momentum, and MTF agreement. Its initial visible count is five, configurable from 1 to 28.

D: PAIR RANKING sorts pairs according to the selected ranking mode. The default uses signal-timeframe Gap; alternative modes include mean Gap across selected MTF periods and agreement-based ranking. A star denotes an active condition state. Click a row to switch the current chart to that pair while keeping its timeframe. Chart switching cannot be evaluated in the Market demo tester.

[[INSERT IMAGE 08: Enlarged English D: PAIR RANKING panel]]

3.9. Reading E: STATUS

Status type What it means / recommended action
READY The required data is available and the indicator is running.
Loading / initializing Multiple symbols/timeframes are loading; allow additional time.
Waiting for next bars The signal bar has closed, but the indicator is waiting for corresponding bars on other required pairs.
Market closed Insufficient recent Forex ticks, typically during weekends or market holidays.
Data gap Some necessary candles are missing; calculation is paused for the affected period.
Missing pairs / insufficient history / invalid settings Check broker symbols, history availability, and input settings; examine the Experts log.
Notify N pairs The count of pairs included in the chosen notification scope, when notifications are enabled.

Exact English status wording can differ depending on the situation or installed build; the descriptions above explain the corresponding states.

4. How Currency Strength and Signals Work

4.1. Strength-score calculation

For each supported pair, the indicator compares price movement over a selected lookback window (default 12 bars) and normalizes it by that pair's typical volatility (default volatility window: 100 bars). A currency's contributions from its seven related Forex pairs are combined and transformed into a 0–100 score, then lightly smoothed (default period: 3).

Normalization is intended to prevent naturally more volatile pairs from dominating solely because their raw price changes are larger.

4.2. Gap: difference between base and quote

Gap = Base-currency strength score − Quote-currency strength score.

Example: if USD is 65 and JPY is 50, the USDJPY Gap is +15, meaning USD is relatively stronger than JPY by 15 points according to this indicator. Positive Gap corresponds to BUY direction and negative Gap to SELL direction; neither is a guaranteed trade outcome.

4.3. Three activation conditions

On each completed signal-timeframe bar, the indicator evaluates each supported pair. For a BUY-direction condition, all three default requirements must be met; SELL conditions use the opposite sign.

Condition BUY-direction default SELL-direction default
1. Gap Signal-timeframe Gap ≥ +12.0 Signal-timeframe Gap ≤ −12.0
2. MTF direction At least 2 higher filter timeframes have Gap ≥ +8.0 (or all available when fewer than 2) At least 2 higher filter timeframes have Gap ≤ −8.0 (or all available when fewer than 2)
3. Momentum Directional Gap expands by at least 3.0 points compared with 3 signal bars earlier Negative Gap expands in the SELL direction by at least 3.0 points compared with 3 bars earlier

When all requirements are satisfied, the state becomes BUY-active or SELL-active and an arrow can be displayed and a notification sent, subject to settings and cooldown rules.

4.4. Cancellation, direction changes, and cooldown

  • A BUY-active state is canceled when its signal-timeframe Gap falls below +8.0 (default).
  • A SELL-active state is canceled when its Gap rises above −8.0 (default).
  • A gray X may be shown at cancellation. If conditions in the opposite direction are simultaneously satisfied, an X and a new opposite-direction arrow may appear together.
  • After a cancellation, arrows for the same direction are suppressed for 3 signal-timeframe bars by default. During this period the analytical state can still become active, but a repeated arrow may not appear. A cooldown value of 0 disables this restriction.

4.5. Missing data and recovery

If the candles needed for a particular evaluation are missing, CurrencyStrength avoids generating a signal from unsupported data. After data resumes, it waits 2 bars by default before restoring normal evaluation. Short missing intervals may be filled using the previous close when Fill missing bars with the previous close is enabled; longer gaps are not guessed or extrapolated indefinitely.

4.6. Automatic and manual filter timeframes

Signal timeframe Automatically selected higher filters
M1 M5, M15, H1
M5 M15, H1, H4
M15 H1, H4, D1
H1 H4, D1
H4 D1
D1 None

Choose Auto to select the above filters. Choose Manual to specify up to four filter timeframes using TF1–TF4. The setting Filter timeframes required to agree (0 = all) determines how many must align; if the requested number exceeds the available filters, all available filters are used. On H4, only D1 is available automatically. On D1, no higher filters are available, so no higher-timeframe agreement is required.

4.7. Closed higher-timeframe bars versus forming bars

  • Closed bar (default): uses confirmed higher-timeframe candles. This is stable, though higher-timeframe direction updates only after the relevant candle has completed.
  • Forming bar: calculates the higher-timeframe condition using the price available when the signal-timeframe candle closes. It reacts sooner but can produce more short-lived alignments.

Signal evaluation itself is performed when the signal-timeframe bar closes. The Japanese source manual reports that completed historical and sequential live signal evaluations were checked for consistency in the Strategy Tester. This describes the indicator's evaluation design, not a guarantee that brokers or incomplete histories will produce identical results.

5. Alerts, Push Notifications, Email and CSV

5.1. Available notifications

Method Indicator input Other requirements
Popup and sound Alert (popup and sound) = true (default) MetaTrader 5 desktop terminal running.
Mobile push Push notification (MT5 mobile) = true MetaQuotes ID and desktop terminal notification settings.
Email Email = true Desktop MetaTrader 5 email delivery settings.
Cancellation notification Also notify signal exits = true Relevant alert method must be enabled; “exit” means condition cancellation.
CSV log Save notified signals to CSV = true A writable terminal/common Files folder.

5.2. Set up push notifications

  1. Install and open the MetaTrader 5 mobile app. Find the MetaQuotes ID in the app's notification/messages settings.
  2. On desktop MT5, go to Tools > Options > Notifications.
  3. Enable push notifications, enter your MetaQuotes ID, and use the terminal's test function to confirm delivery.
  4. In CurrencyStrength Inputs, set Push notification (MT5 mobile) to true.
  5. Keep the desktop terminal and indicator operating to detect new signals.

[[INSERT IMAGE 09: MT5 desktop Tools > Options > Notifications — English interface]]

5.3. Choose which currency pairs send alerts

Set Pairs to notify to one of these modes: Chart pair only (default), All 28 pairs, or Listed pairs/currencies. Use the list fields to include or exclude symbols; exclusions take priority over inclusions.

Input example Result
EURUSD,USDJPY Monitors EURUSD and USDJPY.
GBP Monitors the seven supported pairs containing GBP.
All 28 pairs; exclude NZD,CHF Excludes all pairs containing NZD or CHF; 15 pairs remain in the standard 28-pair universe.

Separate values with commas or spaces. Names are case-insensitive; forms such as EUR/USD may be accepted. Do not add broker-specific prefixes or suffixes to the list. Unrecognized entries are ignored and can generate warnings in the Experts log.

5.4. Alert content and duplicate prevention

Example notification: CurrencyStrength [H1] USDJPY BUY 10:00 Gap +13.2 MTF 2/2. When several monitored pairs trigger at the same time, the indicator can consolidate them. Signals that existed before the indicator was attached do not generate retroactive notifications.

Notifications for the same signal are suppressed across multiple attached instances. If you want to monitor all 28 pairs, it is usually more efficient to attach the indicator to one chart and select All 28 pairs. M1 and M5 can produce frequent signals, so narrow the notification scope as needed.

5.5. CSV log of notified events

Enable Save notified signals to CSV to record notifications, including cancellation events if enabled. The usual terminal path is MQL5\Files\CurrencyStrength\CS_SignalLog.csv; a common Files location may be selected in the CSV location input. CSV output is optional and is off by default.

6. Practical Workflows

6.1. A simple market-analysis routine

  1. Look at A: RANKING to identify relatively strong and weak currencies.
  2. Open D: PAIR RANKING and look for pairs with a sizable Gap; click a pair to change the chart if desired.
  3. Check B: MTF to see whether higher-timeframe directions support the current Gap direction.
  4. Use arrows, the active-signals panel, and notifications to identify when the configured conditions are met.
  5. Make any trade entry, stop-loss, profit-taking, or exit decision according to your independent method.

6.2. Example configurations by trading horizon

Style Typical chart Signal TF Automatic higher filters Suggested alert scope
Scalping M1 / M5 current M1 → M5/M15/H1; M5 → M15/H1/H4 Chart pair or a short selected list.
Day trading M15 / H1 current M15 → H1/H4/D1; H1 → H4/D1 Selected pairs or all 28 as needed.
Swing analysis H4 / D1 current H4 → D1; D1 → none All 28, if appropriate.

These are configuration examples, not recommended trade entry strategies. The original Japanese guide notes that notifications on M1 across all 28 pairs can be extremely frequent; scope selection is especially important on M1/M5.

6.3. Analyze H1 while viewing an M5 chart

Set Signal timeframe (current = chart timeframe) to H1, then open an M5 chart. The indicator continues to evaluate H1-based conditions while the visible chart shows lower-timeframe price detail. The strength lines can look stepped because the signal timeframe remains H1.

6.4. How to interpret an X

The X indicates that the active currency-strength condition has ended, commonly because Gap has contracted. A price reversal is not implied, and the mark should not be treated as an automatic take-profit or stop-loss signal.

7. Complete Input Parameter Reference

The following tables cover the CurrencyStrength_EN.mq5 v1.00 inputs. Parameter names reproduce the English labels from the supplied source. Default colors and numeric values correspond to the English build; a few display labels may be shortened by the MetaTrader input window.

7.1. Timeframes

Input name (English) Default What it controls
Signal timeframe (current = chart timeframe) current Bar timeframe used for strength and signal evaluation. Fix it to H1, etc., to keep the signal TF independent of the chart TF.
Use multiple timeframes (MTF) true Enable higher-timeframe direction filtering.
Filter timeframe selection Auto Auto chooses up to three higher filters; Manual uses TF1–TF4.
Use TF1 (manual) true Include first manually selected filter when Manual mode is active.
TF1 timeframe (manual) M15 First manual filter timeframe.
Use TF2 (manual) true Include second manual filter.
TF2 timeframe (manual) H1 Second manual filter timeframe.
Use TF3 (manual) true Include third manual filter.
TF3 timeframe (manual) H4 Third manual filter timeframe.
Use TF4 (manual) true Include fourth manual filter.
TF4 timeframe (manual) D1 Fourth manual filter timeframe.
Filter timeframes required to agree (0 = all) 2 Minimum number of same-direction filters; 0 means all available.
Bar used for filter timeframes Closed bar Closed higher-timeframe bars (default) or forming bars.
Gap threshold for direction per timeframe 8.0 Gap magnitude used to categorize each filter as BUY, SELL, or NEUTRAL.

7.2. Signal conditions

Input name (English) Default What it controls
Entry Gap threshold (signal TF) 12.0 Signal activation Gap threshold, not an order-entry price.
Exit Gap threshold (signal TF) 8.0 Active-condition cancellation Gap threshold, not a trade exit.
Momentum lookback (bars) 3 Comparison period used for directional Gap expansion.
Momentum threshold 3.0 Minimum directional Gap expansion.
Bars before the same direction can signal again (0 = off) 3 Suppress repeated same-direction arrows for this many bars after cancellation.
Bars to wait after a data gap 2 Recovery bars required before resuming normal evaluation.

7.3. Display

Input name (English) Default What it controls
Show strength lines true Show/hide the eight currency lines.
Line width of the chart pair's two currencies 2 Thickness of the two currencies belonging to the current chart pair.
Line width of other currencies 1 Thickness of the other six currencies.
Show line values in the Data Window false Include line values in MetaTrader Data Window.
Show signal arrows true Display historical and new indicator arrows.
Buy arrow color DodgerBlue BUY-direction arrow color.
Sell arrow color Red SELL-direction arrow color.
Arrow size 2 Size of the arrows.
Show exit mark (x) true Show X when a signal condition state is canceled.
Exit mark color Gray Color of the X mark.
Bars to display (also sets the calculation range) 500 Historical drawing range and related calculation scope.
Show guide levels (50 is always shown) true Show the optional upper and lower reference lines.
Upper guide level 70.0 Upper reference level.
Lower guide level 30.0 Lower reference level.

7.4. Main panel

Input name (English) Default What it controls
A: Show currency ranking true Show panel A.
B: Show the chart pair by timeframe true Show panel B.
C: Show pairs with active signals true Show panel C.
C: Number of pairs (1-28) 5 Number of active pairs shown.
D: Show pair ranking (click to switch chart) true Show panel D.
D: Sort by Signal TF Gap Pair ranking mode: signal-TF Gap, average MTF Gap, or MTF agreement.
D: Number of pairs (1-28) 5 Number of ranked pairs shown.
Font (monospaced) Consolas Font for main panel; monospaced recommended.
Font size 9 Main panel text size.
Position Upper right Main panel chart corner.
Horizontal margin from the corner 10 Horizontal offset in pixels.
Vertical margin from the corner 20 Vertical offset in pixels.
Background color 20,20,28 Panel background color (RGB).
Text color Silver Main panel text color.
Border color DimGray Main panel border color.

7.5. Sub panel

Input name (English) Default What it controls
Show sub panel (click to show/hide lines) true Display CURRENCY controls.
Font (monospaced) Consolas Font for sub panel.
Font size 9 Sub panel text size.
Position Upper right Sub panel corner.
Horizontal margin from the corner 10 Horizontal offset in pixels.
Vertical margin from the corner 4 Vertical offset in pixels.
Background color 20,20,28 Sub panel background (RGB).
Border color DimGray Sub panel border color.
Text color of hidden currencies DimGray Appearance of hidden currency rows.

7.6. Currencies

Input name (English) Default What it controls
USD: show line true Show the USD strength line at initialization.
EUR: show line true Show the EUR strength line at initialization.
GBP: show line true Show the GBP strength line at initialization.
JPY: show line true Show the JPY strength line at initialization.
CHF: show line true Show the CHF strength line at initialization.
CAD: show line true Show the CAD strength line at initialization.
AUD: show line true Show the AUD strength line at initialization.
NZD: show line true Show the NZD strength line at initialization.
USD: color LimeGreen Strength line color for USD.
EUR: color DodgerBlue Strength line color for EUR.
GBP: color Red Strength line color for GBP.
JPY: color Gold Strength line color for JPY.
CHF: color Magenta Strength line color for CHF.
CAD: color Orange Strength line color for CAD.
AUD: color Aqua Strength line color for AUD.
NZD: color White Strength line color for NZD.

7.7. Notifications

Input name (English) Default What it controls
Alert (popup and sound) true Enable MT5 popup/sound alerts.
Push notification (MT5 mobile) false Enable MetaQuotes-ID-based phone alerts.
Email false Enable email notifications; terminal mail must be configured.
Pairs to notify Chart pair only Chart pair, all 28, or a selected list.
Listed pairs/currencies, e.g. EURUSD,USDJPY,GBP blank Pairs/currencies to include when selected-list mode is used.
Excluded pairs/currencies, e.g. NZD,CHF,EURGBP blank Exclusion filter; takes priority over inclusions.
Also notify signal exits false Notify signal-state cancellations (X); not trade exits.
Save notified signals to CSV false Write notified events to CSV.
CSV location MQL5 Files of this terminal Location of the signal-log CSV file.

7.8. Strength calculation (advanced, usually unchanged)

Input name (English) Default What it controls
Strength lookback (bars) 12 Price-change lookback used for strength.
Volatility period (bars) 100 Price-volatility normalization window.
Minimum volatility 0.000001 Lower bound used in volatility calculations.
Missing bars allowed in volatility window 10 Permitted missing observations inside the normalization window.
Smoothing period 3 Final smoothing period.
Smoothing warm-up bars 30 Warm-up period for smoothing.
Consecutive missing bars that reset smoothing 8 Reset smoothing after a sufficiently long data interruption.
Preparation bars 150 Extra historical bars for calculation initialization.
Fill missing bars with the previous close true Fill limited short gaps using the last close; not unlimited synthetic history.
Time reference pair (when filling is off) EURUSD Reference pair used for time alignment when filling is disabled.

7.9. Symbols (usually unchanged)

Input name (English) Default What it controls
Specify symbol prefix/suffix manually false Enable manual broker symbol-affix configuration.
Prefix (e.g. FX:) blank Optional prefix such as FX:.
Suffix (e.g. .pro) blank Optional suffix such as .pro.

7.10. Other

Input name (English) Default What it controls
Log level (errors and warnings are always shown) Standard Choose minimal, standard, or detailed logging; errors and warnings remain visible.

[[INSERT IMAGE 10: English parameter pages — Timeframes, Signal conditions, Display, Main panel]]

[[INSERT IMAGE 11: English parameter pages — Sub panel, Currencies, Notifications, Calculation, Symbols, Other]]

8. Free Market Demo — Test Before You Buy

The MQL5 Market demo version can be evaluated using the MetaTrader 5 Strategy Tester in Visual Mode. It cannot be attached to ordinary live charts. It is not a time-limited license for real-time use.

  1. Download the Market demo in MetaTrader 5.
  2. Open the Strategy Tester and select the indicator.
  3. Choose the test symbol, timeframe, and historical period, and review the input parameters.
  4. Start a visual test to inspect strength lines, rankings, MTF state, and historical signal markers.
  5. Stop the test, change settings such as Gap/MTF/Momentum, and run again if desired.

Tester limitations: popup/sound alerts, push notifications, and email delivery are disabled in Strategy Tester. Pair-click chart switching is not supported there. The demo also needs adequate price history for its 28-pair calculations. Full real-time functionality requires a purchased or rented license.

9. Important Usage Notes

  • During broker-server rollover hours, spreads and prices can behave irregularly; use particular caution when interpreting short-term signals.
  • At first launch or after changing symbols/timeframes, the terminal may need more time to load history.
  • On weekends and Forex market holidays, new events may not occur and the indicator can report a market-closed state, even when viewing a chart for another instrument.
  • M1 and M5 can generate many events across 28 pairs. Limit the notification scope if needed.
  • Forming higher-timeframe bar mode reacts sooner than closed-bar mode but can produce more transient conditions.
  • When historical coverage is short, older chart sections may show no strength lines or markers.
  • Brokers can differ in price feeds, server times, and available history; their resulting scores and signal timings may differ.
  • The indicator can run in Strategy Tester; however, preparing 28-pair history can increase startup time.
  • On non-Forex-pair charts, such as Gold, currency ranking and strength lines may still display, while chart-pair MTF and arrows are unavailable for that symbol.

10. Troubleshooting and Frequently Asked Questions

10.1. The status says some required currency pairs are missing.

Check whether the broker offers all 28 pairs. Inspect the Experts log for the missing symbols. If the broker uses a prefix or suffix that auto-detection cannot handle, enable manual symbol-affix inputs.

10.2. The status says insufficient history.

Allow MT5 time to download price data; increase Max bars in chart if it is too small; reattach the indicator after history becomes available. Make sure the selected timeframes exist for all required pairs.

10.3. No strength lines or arrows are visible.

Check E: STATUS, display parameters, and currency visibility. If the chart is Gold or another unsupported pair, strength lines and rankings can still be shown but pair-specific arrows and B: MTF are not drawn.

10.4. It keeps waiting for a new bar.

The signal-timeframe candle closed, but not all required pairs have corresponding completed bars yet. During illiquid periods this can take longer; during weekends it may transition to a market-closed state.

10.5. No alerts arrive on my phone.

Confirm Pairs to notify and the notify count in E: STATUS. Enable Push notification (MT5 mobile), set MetaQuotes ID under desktop MT5 Tools > Options > Notifications, and use its test function. Historical markers do not send retroactive alerts.

10.6. My markers changed when I changed chart timeframe.

If Signal timeframe is current, it changes along with the chart timeframe. Select a fixed Signal timeframe (for example H1) if you want consistent H1-based evaluation while changing chart periods.

10.7. The ranking click does nothing in Strategy Tester.

The tester does not allow symbol changes in the way a normal chart does. This is a tester limitation, not an indication that the purchased product is missing the feature.

10.8. Why do different brokers show different values?

The indicator depends on broker price feeds and timing. Divergent history, missing bars, and different server times can result in different scores.

10.9. How do I collect logs for support?

Set Log level to Detailed, reattach the indicator if needed, reproduce the issue, and copy the relevant messages from the Experts tab. Include broker, account type, chart symbol/timeframe, modified settings, and a screenshot of E: STATUS.

11. Disclaimer, Support and Version Information

11.1. Disclaimer

  • CurrencyStrength provides reference information for independent trading decisions and is not a recommendation to buy or sell any instrument.
  • No profitability, winning percentage, or future market direction is guaranteed.
  • The user remains responsible for all trading, position sizing, exits, and risk management.
  • MetaTrader, broker, connectivity, and market-data changes can affect operation.
  • The indicator and accompanying documentation remain subject to the author's copyright; unauthorized duplication, redistribution, or resale are not permitted.

11.2. Support on MQL5

For product questions or bug reports, use the product Comments section or the MQL5 messaging system. When reporting a technical issue, please provide your broker and account type, chart symbol and timeframe, changed inputs, E: STATUS message, and relevant Experts logs. Do not post private account credentials.

11.3. Version

Manual: English guide for CurrencyStrength EN, version 1.00. Based on the original Japanese 20-page manual for the MT5 edition, with installation and support instructions adapted to MQL5 Market distribution. Screenshots in this guide should be taken from the EN build.

Product: CurrencyStrength MTF 28 Pair Analyzer on the MQL5 Market.