MQH will never become a language on the level of C++, MML5 - General

SuhanovDM94 2022.02.06 07:21 #31461

Good day to all. Can you please advise whether Sleep() function is executed in EA testing mode (testing on real ticks, of course)?

fxsaber 2022.02.06 08:18 #31462

SuhanovDM94 #:
Good day to all. Could you please advise whether Sleep() is executed in the Expert Advisor testing mode (testing on real ticks, of course)?

In progress - the Tester time is changed by an appropriate amount.

SuhanovDM94 2022.02.06 10:46 #31463

fxsaber #:

Executed - the Tester time is changed by an appropriate amount.

Thank you very much!

[Deleted] 2022.02.06 18:31 #31464

Wizard #:
Is it possible to find the size of the very tick in mql5, after which a position was opened?

It turns out that you can. The for loop is inserted in a separate function, in the OnTick() function or at your own discretion. I am interested in the opinion of others. For example, I need it to create an ultra-precise system. Therefore, I'm writing without libraries, including functions for opening and closing positions. Whoever says what, mqh libraries slow down the work, for example compilation takes 1.5 times longer. It's better to write everything in one file. The style, OOP or procedural, does not matter. MQL5 will never become a language on the level of C++, it is limited. The point is in libraries.

#define  EXPERT_MAGIC 261              // MagicNumber эксперта
input string Symbol_T  = "XAUUSD";    // глобальная переменная для задаваемого символа

..............

for(int i = PositionsTotal()-1; i >= 0; i--)
{
   if(PositionGetTicket(i) > 0 && PositionGetString(POSITION_SYMBOL) == Symbol_T && PositionGetInteger(POSITION_MAGIC) == EXPERT_MAGIC)
   {
      int attempts = 0;       // счетчик попыток
      bool success = false;   // флаг успешного выполнения копирования тиков
      MqlTick tick_array[];   // массив для приема тиков
         
      //--- сделаем 3 попытки получить тики
      while(attempts < 3)
      {
         //--- замерим время старта перед получением тиков
         uint start = GetTickCount();
         //--- дата, по которую запрашиваются тики (время открытия позиции)
         datetime Time_Open = (datetime)PositionGetInteger(POSITION_TIME);
         //--- дата, с которой запрашиваются тики (достаточно взять на 30 секунд раньше открытия позиции)
         datetime Time_Start = (datetime)(Time_Open-30);
         //--- запросим тиковую историю с момента Time_Start до момента Time_Open
         int received = CopyTicksRange(Symbol_T, tick_array, COPY_TICKS_ALL, Time_Start*1000, Time_Open*1000);
         if(received != -1)
         { 
            //--- выведем информацию о количестве тиков и затраченном времени
            PrintFormat("%s: received %d ticks in %d ms", Symbol_T, received, GetTickCount()-start);  
            //--- если тиковая история синхронизирована, то код ошибки равен нулю
            if(GetLastError()==0)
            {
               success = true;
               break;
            }
            else
               PrintFormat("%s: Ticks are not synchronized yet, %d ticks received for %d ms. Error=%d", Symbol_T, received, GetTickCount()-start, _LastError);
         }
         //--- считаем попытки
         attempts++;
         //--- пауза в 1 секунду в ожидании завершения синхронизации тиковой базы
         Sleep(1000);
      }
      //--- не удалось получить запрошенные тики от самого начала истории с трех попыток 
      if(!success)
      {
         PrintFormat("Ошибка! Не удалось получить %d тиков по %s с трех попыток", Symbol_T);
	 //return; (вставить, если цикл находится внутри функции типа void)
      }

      //--- узнаем количесто элементов в массиве
      int ticks = ArraySize(tick_array);

      //--- выведем bid последнего тика в массиве перед самым открытием позиции
      double last_bid_before_priceopen = tick_array[ticks-1].bid;
      Print("BID последнего тика: ", tick_array[ticks-1].bid);
      //--- выведем ask последнего тика в массиве перед самым открытием позиции
      double last_ask_before_priceopen = tick_array[ticks-1].ask;
      Print("ASK последнего тика: ", tick_array[ticks-1].ask);

      //--- узнаем цену, по которой была открыта позиция
      double Position_PriceOpen = PositionGetDouble(POSITION_PRICE_OPEN);

      if((ENUM_POSITION_TYPE)PositionGetInteger(POSITION_TYPE) == POSITION_TYPE_BUY)
      {
         //--- вычислим размер последнего тика, на котором была открыта позиция (для BUY позиции открытие было по цене ASK)
         double size_last_tick_ASK = NormalizeDouble(fabs(Position_PriceOpen - last_ask_before_priceopen), _Digits);
      }
      else if((ENUM_POSITION_TYPE)PositionGetInteger(POSITION_TYPE) == POSITION_TYPE_SELL)
      {
         //--- вычислим размер последнего тика, на котором была открыта позиция (для SELL позиции открытие было по цене BID)
         double size_last_tick_BID = NormalizeDouble(fabs(last_bid_before_priceopen - Position_PriceOpen), _Digits);
      }
   }
}

[ARCHIVE!] Any rookie question, ATcl - Tcl interpreter MT5 is for programmers,

Max B 2022.02.06 23:37 #31465

I'm sick of this bug - there is an indicator, there is an expert working on it. I change the indicator and recompile it. The indicator changes can be clearly seen on the chart - the Expert Advisor is run in the tester - but it is as if it didn't change anything. The same result.

If I restart the terminal and pass the tester after that it will generate a new code.

What is this hack, I do not understand.

I removed indicator ex5. Tester continues to run as if nothing has happened. Where does it get the file to run????

MetaTrader 4 Build 529 Speculation write file in tester

Nikolai Semko 2022.02.07 00:48 #31466

Roman #:

3184
Strange behaviour in the indicator.
The for loop goes into the body, not on every tick, but only once on a new candle.

But i == 0 and the given condition allows i>=0

on the tick on the same bar limit = 0
so the first value of i = -1 and condition i>=0
that is why it does not go into the loop.

Roman 2022.02.07 01:08 #31467

Nikolai Semko #:

at the tick on the same bar limit = 0
so the first value i = -1 and the condition i>=0
that's why it doesn't go into the loop.

Thanks, I missed the one.

But now indicator buffer IndBuff[i] is doing its head in, array out of range.
What does it need? Why doesn't it allocate to initial i=limit ?

//+------------------------------------------------------------------+
//|                                                       Simple.mq5 |
//|                                  Copyright 2021, MetaQuotes Ltd. |
//|                                             https://www.mql5.com |
//+------------------------------------------------------------------+
#property copyright "Copyright 2021, MetaQuotes Ltd."
#property link      "https://www.mql5.com"
#property version   "1.00"
#property indicator_chart_window

#property indicator_buffers      1
#property indicator_plots        1


//indicator buffers
double IndBuff[];

double c = 0;

//+------------------------------------------------------------------+
//| Custom indicator initialization function                         |
//+------------------------------------------------------------------+
int OnInit()
{
   SetIndexBuffer(0, IndBuff, INDICATOR_DATA);
   PlotIndexSetInteger(0, PLOT_DRAW_TYPE,  DRAW_LINE);   //тип отрисовки
   PlotIndexSetInteger(0, PLOT_LINE_STYLE, STYLE_SOLID); //стиль отрисовки
   PlotIndexSetInteger(0, PLOT_LINE_COLOR, clrAqua);     //цвет отрисовки
   PlotIndexSetInteger(0, PLOT_LINE_WIDTH, 1);           //толщина отрисовки
   PlotIndexSetString(0,  PLOT_LABEL,"K");               //метка
   PlotIndexSetDouble(0,  PLOT_EMPTY_VALUE, 0.0);        //нулевые значения считать пустыми
   
   return(INIT_SUCCEEDED);
}


//+------------------------------------------------------------------+
//| Custom indicator iteration function                              |
//+------------------------------------------------------------------+
int OnCalculate (const int rates_total,       
                 const int prev_calculated,   
                 const int begin,             
                 const double& price[])      
{

   ArraySetAsSeries(IndBuff, true);
   
   //-------------------------------------------------------------------------
   //Проверка и расчёт количества просчитываемых баров
   int limit = rates_total-prev_calculated;

   
   //-------------------------------------------------------------------------
   //Расчёт индикатора
   for(int i=limit; i>=0; i--)
   {
      c = iClose(_Symbol,PERIOD_CURRENT,i);      
      
      IndBuff[i] = c;  //на этой строке array out of range

   }
   

   return(rates_total);
}

Vitaly Muzichenko 2022.02.07 03:44 #31468

Roman #:

Thanks, missed the one.

But now indicator buffer IndBuff[i] is doing the brains, array out of range.
What does it need? Why it does not allocate to initial i=limit ?

   //Проверка и расчёт количества просчитываемых баров
   int limit = rates_total-prev_calculated;

   if(limit==1)
     limit=2;
   //-------------------------------------------------------------------------
   //Расчёт индикатора
   for(int i=limit-1; i>=0; i--)
   {
      c = iClose(_Symbol,PERIOD_CURRENT,i);      
      
      IndBuff[i] = c;  //на этой строке array out of range

   }

Roman 2022.02.07 03:55 #31469

Vitaly Muzichenko #:

So on every bar it goes into a loop, while it needs to go into a loop on every tick.

It used to work like this

for the ticks i>=0,

for bars i>0

Now I do not know how to work with the buffer.

Roman 2022.02.07 09:15 #31470

That's because IndBuff is not allocated to rates_total + 1
And ArrayResize is not applicable to it.
They broke the for construct. Now we have to use if-arses to do everything?

//+------------------------------------------------------------------+
//| Custom indicator iteration function                              |
//+------------------------------------------------------------------+
int OnCalculate (const int rates_total,       
                 const int prev_calculated,   
                 const int begin,             
                 const double& price[])      
{

   ArraySetAsSeries(IndBuff, true);
   
   //-------------------------------------------------------------------------
   //Проверка и расчёт количества просчитываемых баров
   int limit = rates_total-prev_calculated;
   
   if(limit > 1)
   {
      
      Print(rates_total,": rates_total");
      Print(limit,": limit");   
      Print(ArraySize(IndBuff),": IndBuff");
   }   
   
   //-------------------------------------------------------------------------
   //Расчёт индикатора
   for(int i=limit; i>=0; i--)
   {
      c = iClose(_Symbol,PERIOD_CURRENT,i);    

      IndBuff[i] = c;  //array out of range

   }
   

   return(rates_total);
}

100686: rates_total
100686: limit
100686: IndBuff
array out of range in 'Simple.mq5' (82,15)

Errors, bugs, questions - page 3147