Swap Checker

SHORT SUMMARY
See the daily and weekly swap for every symbol you trade, Buy and Sell, in your account currency, before you hold a position overnight.

------------------------------------------------------------
DESCRIPTION
------------------------------------------------------------

Swap is easy to ignore when you open a trade and hard to ignore when it adds up. Swap Checker puts the overnight cost of holding, or the credit you earn, for every symbol you trade into one compact table on your chart.

For each symbol, the panel shows two rows, one for Buy and one for Sell, with the swap for Monday through Friday and a weekly total. Every value is calculated from your own broker's contract specification and shown in your account currency for the lot size you choose.

Green means that direction pays you to hold. Red means it costs you. White means it's flat. You can see in a few seconds which side of a pair carries, and how much a multi-day hold really costs.

WHAT IT SHOWS
- Two rows per symbol (Buy and Sell) with Mon, Tue, Wed, Thu and Fri columns plus a weekly total
- The triple-swap day for each symbol, marked with an asterisk (*) and already multiplied by 3
- Colour coding by weekly result: earning, paying or flat
- A summary line with lot size, symbol source, symbol count and last update time

KEY FEATURES
- Two symbol sources: every symbol on your open charts, or your full Market Watch list
- Adjustable lot size (default 1.00), so the figures match the size you actually trade
- Per-symbol triple-swap day, read from the broker's rollover setting rather than assumed to be Wednesday. FX pairs, indices, metals and crypto can triple on different days.
- Swap filter with seven modes: None, Positive Only, Negative Only, Zero Only, Positive and Zero, Negative and Zero, Positive and Negative. Buy and Sell are filtered independently, so "Positive Only" shows exactly which direction earns swap on each symbol.
- Alphabetical or default ordering, with each symbol's Buy and Sell rows kept together
- Option to hide symbols with zero swap on both sides
- A compact panel that sizes itself to the rows shown and minimises to its title bar
- Fully customisable colours

HOW THE NUMBERS ARE CALCULATED
Swap Checker reads each symbol's swap mode, long and short swap rates, rollover day and contract details directly from the terminal, then converts the result to your account currency.

Supported swap modes:
- Points: points x point size x contract size x lots, converted from the symbol's profit currency. A second calculation using the broker's tick value runs as a cross-check, and any disagreement of more than 5% is written to the Experts log with the raw values.
- Currency (base, margin or deposit currency): converted to your account currency using live exchange rates
- Interest rate (current or open price): annual rate applied to position value using a 360-day convention
- Legacy "reopen" modes don't reduce to a fixed daily amount and are shown as N/A rather than as an invented number.

BUILT TO BE RELIABLE
After a terminal restart, broker data for some symbols can take a moment to arrive. Instead of mislabelling those symbols, Swap Checker shows them as "Syncing..." and retries every 5 seconds for up to about two minutes. Once everything is in, it switches to your normal refresh interval (default: every 6 hours, since swap rates rarely change intraday).

READ-ONLY
Swap Checker is an indicator. It never opens, modifies or closes trades and places no orders.

------------------------------------------------------------
INPUT PARAMETERS
------------------------------------------------------------
Symbol Source
- Symbol Source: Open Charts or Market Watch
- Max symbols to display: default 20
- Hide symbols with 0 swap both sides: default false
- Row order: Default (collection order) or Alphabetical
- Swap filter: None (default), Positive Only, Negative Only, Zero Only, Positive and Zero, Negative and Zero, Positive and Negative

Calculation
- Lot size: default 1.00

Display
- Show panel: default true
- Refresh interval in seconds: default 21600 (6 hours)
- Colours: header, text, positive swap, negative swap, unsupported (N/A), syncing

------------------------------------------------------------
GOOD TO KNOW
------------------------------------------------------------
- Values are forward-looking estimates based on the current contract specification. They aren't a record of swaps already charged, and brokers can change swap rates at any time.
- Filters use the weekly total, so a row counts as positive when its five-day sum is above zero.
- If a broker sets the triple-swap day to Saturday or Sunday, the extra charge is shown in the Friday column.
- For interest-rate swap modes, some brokers use a 365-day convention, so expect small differences.
- If no conversion pair is available for a currency-based swap, the figure is shown in its original currency. Check those rows against your broker's specification.
- The panel uses a fixed-width layout. On a very narrow chart window, widen the chart to see the weekly column in full.

REQUIREMENTS
- MetaTrader 5
- Any broker, account type and account currency
- Works on any symbol and timeframe. Attach to one chart; it reads all symbols from your selected source.

作者的更多信息
True Move AD
Ebuka Francis Obiakor
True Move A/D 资金流层面的解读。一条线。三个组合信号。 标准 Chaikin 累积/派发线只使用一个因素 —— 收盘价位于K线波幅内的位置。True Move A/D 使用三个因素,并按其实际可靠性加权。 复合公式: K = 0.10 × 价格流 + 0.10 × 中点偏差 + 0.70 × 收盘-收盘方向 将 70% 的权重赋予收盘-收盘动量是经过深思熟虑的。一根K线收盘价相对于开盘价的位置,是跨K线最真实方向性承诺的最一致信号。两个K线内部成分增添细节,而不会淹没主要信号。 所有数据均按前一根K线的加权平均价进行标准化 —— 使该指标跨品种、跨时间框架保持一致,防止大波幅K线仅凭规模就主导结果。 与现有 A/D 指标的区别: 标准 Chaikin A/D 完全忽略收盘-收盘关系 OBV 仅使用方向,无幅度 PVT 使用百分比变化,但无K线内部位置 True Move A/D 将三者结合为单一原则性复合指标 背离是主要信号。当 True Move A/D 上升而价格横盘或下跌时,真实的买方压力正在积聚。当该线走平而价格创出新高时,信念正在图表确认之前消退。 与
FREE
Close Open AD
Ebuka Francis Obiakor
Close-Open A/D (CO A/D): A Cumulative Volume-Efficiency Line for Accumulation/Distribution Analysis CO A/D is a cumulative Accumulation/Distribution-style indicator built around a simple question On-Balance Volume and Chaikin A/D don't directly ask: how efficiently did each bar convert its own volume into open-to-close travel? Formula CO_raw = (Close − Open) / (High − Low) Volume = Log(TickVolume + 1) [or raw volume — selectable] CO A/D = Previous CO A/D + (CO_raw × Volume) Where OBV assigns ful
FREE
Directional Impulse
Ebuka Francis Obiakor
Directional Impulse 一个公式。每根K线。瞬间可读。 大多数指标告诉你价格在哪里或移动速度有多快。Directional Impulse 告诉你的是另一回事:这根K线谁赢了,赢了多少。 基于原创公式 — X = (2C − H − L) × (H − L) 与 X = (C − O) × (H − L) — 它将方向性偏差乘以K线的完整波幅,而不是像该谱系中所有先前指标那样将其归一化消除。结果是每根K线的有符号能量度量,同时捕捉了信念与波动性。有符号平方根变换将输出缩放到线性价格单位,使K线的完整分布变得可读,而非被一两个异常走势主导。 Combo 版本同时绘制两层: 中点锚定(宽柱)—— 当内部压力转变时最先翻转。最先发现看涨或看跌K线内部正在形成的拉锯。 开盘锚定(窄柱)—— 仅当K线实体反转时才翻转。确认完全接管。 共识模式 —— 将两个锚定叠加为单柱,在一致时放大,在 contested K线时压缩至接近零。 你以前看不到、现在能看到的: 一根带有长上影线的看涨K线显示为看跌 —— 因为卖方在收盘前将价格推回至波幅中点下方 衰减的脉冲柱(同方向、缩小尺寸
FREE
**你需要这个工具。** 你亏损不是因为不懂交易,而是因为没有风控护栏在交易。这个工具能解决这个问题。 无论你是新手还是专业交易员,这都是你保护、管理和壮大交易账户所需的唯一工具。 **部分核心功能包括:** **净值保护** – 达到最大回撤时停止交易   ️ **保证金保护** – 防止过度暴露   **杠杆控制** – 限制有效杠杆   **时间过滤** – 仅在设定时段内交易   **智能仓位管理** – 按风险百分比或固定金额   **ATR 间距** – 避免过度交易   **趋势过滤** – 顺势交易   **移动止损** – 锁定利润   **自动操作** – 阻止、平仓或清理订单   **实时仪表盘** – 全面掌握账户状况   **这是你当初开始交易前就希望拥有的工具。** --- **使用指南如下:** **第 1 步:挂上 EA**   将 EA 添加到任意图表   适用于:   - 外汇   - 加密货币   - 股指   - 大宗商品   **第 2 步:设置你的风控规则(重要)**  
BRIEF DESCRIPTION On-chart panel showing SL, TP, risk and RR for every position, with optional break-even and loss caps. FULL DESCRIPTION TradeMonitor puts all of your open positions and pending orders on one clean chart panel, so you can see exactly what you are risking and what you stand to make on every trade, in dollars. It does not open trades. It watches the trades you already have and, if you choose, helps protect them. SEE EVERY POSITION AT A GLANCE - Stop loss risk in account curren
Invalidation Line EA
Ebuka Francis Obiakor
SHORT DESCRIPTION Hide your stop loss on the chart. The EA closes only after confirmed candle closes, not wicks. FULL DESCRIPTION Have you ever widened your stop to give a trade more room, only to be stopped out and watch price reverse? Most traders have. Widening a stop makes your risk-reward worse, and a stop that sits at an obvious level is easy to wick through. Invalidation Line EA takes a different approach. Instead of a hard stop at the level, you draw a line where your trade idea is in
Average Entry Price Lines
Ebuka Francis Obiakor
Average Entry Price Lines draws one horizontal line at the volume-weighted average entry price of your open positions, with Buy and Sell calculated separately. When you are scaled into a position across several tickets, that single line tells you where the whole basket actually sits. With one position, the average collapses to that position's own entry, so the line lands exactly on it. What it draws Volume-weighted average entry per direction: avg = SUM(entry x lots) / SUM(lots) Optional project
FREE
筛选:
无评论
回复评论