Swap Checker

SHORT SUMMARY
See the daily and weekly swap for every symbol you trade, Buy and Sell, in your account currency, before you hold a position overnight.

------------------------------------------------------------
DESCRIPTION
------------------------------------------------------------

Swap is easy to ignore when you open a trade and hard to ignore when it adds up. Swap Checker puts the overnight cost of holding, or the credit you earn, for every symbol you trade into one compact table on your chart.

For each symbol, the panel shows two rows, one for Buy and one for Sell, with the swap for Monday through Friday and a weekly total. Every value is calculated from your own broker's contract specification and shown in your account currency for the lot size you choose.

Green means that direction pays you to hold. Red means it costs you. White means it's flat. You can see in a few seconds which side of a pair carries, and how much a multi-day hold really costs.

WHAT IT SHOWS
- Two rows per symbol (Buy and Sell) with Mon, Tue, Wed, Thu and Fri columns plus a weekly total
- The triple-swap day for each symbol, marked with an asterisk (*) and already multiplied by 3
- Colour coding by weekly result: earning, paying or flat
- A summary line with lot size, symbol source, symbol count and last update time

KEY FEATURES
- Two symbol sources: every symbol on your open charts, or your full Market Watch list
- Adjustable lot size (default 1.00), so the figures match the size you actually trade
- Per-symbol triple-swap day, read from the broker's rollover setting rather than assumed to be Wednesday. FX pairs, indices, metals and crypto can triple on different days.
- Swap filter with seven modes: None, Positive Only, Negative Only, Zero Only, Positive and Zero, Negative and Zero, Positive and Negative. Buy and Sell are filtered independently, so "Positive Only" shows exactly which direction earns swap on each symbol.
- Alphabetical or default ordering, with each symbol's Buy and Sell rows kept together
- Option to hide symbols with zero swap on both sides
- A compact panel that sizes itself to the rows shown and minimises to its title bar
- Fully customisable colours

HOW THE NUMBERS ARE CALCULATED
Swap Checker reads each symbol's swap mode, long and short swap rates, rollover day and contract details directly from the terminal, then converts the result to your account currency.

Supported swap modes:
- Points: points x point size x contract size x lots, converted from the symbol's profit currency. A second calculation using the broker's tick value runs as a cross-check, and any disagreement of more than 5% is written to the Experts log with the raw values.
- Currency (base, margin or deposit currency): converted to your account currency using live exchange rates
- Interest rate (current or open price): annual rate applied to position value using a 360-day convention
- Legacy "reopen" modes don't reduce to a fixed daily amount and are shown as N/A rather than as an invented number.

BUILT TO BE RELIABLE
After a terminal restart, broker data for some symbols can take a moment to arrive. Instead of mislabelling those symbols, Swap Checker shows them as "Syncing..." and retries every 5 seconds for up to about two minutes. Once everything is in, it switches to your normal refresh interval (default: every 6 hours, since swap rates rarely change intraday).

READ-ONLY
Swap Checker is an indicator. It never opens, modifies or closes trades and places no orders.

------------------------------------------------------------
INPUT PARAMETERS
------------------------------------------------------------
Symbol Source
- Symbol Source: Open Charts or Market Watch
- Max symbols to display: default 20
- Hide symbols with 0 swap both sides: default false
- Row order: Default (collection order) or Alphabetical
- Swap filter: None (default), Positive Only, Negative Only, Zero Only, Positive and Zero, Negative and Zero, Positive and Negative

Calculation
- Lot size: default 1.00

Display
- Show panel: default true
- Refresh interval in seconds: default 21600 (6 hours)
- Colours: header, text, positive swap, negative swap, unsupported (N/A), syncing

------------------------------------------------------------
GOOD TO KNOW
------------------------------------------------------------
- Values are forward-looking estimates based on the current contract specification. They aren't a record of swaps already charged, and brokers can change swap rates at any time.
- Filters use the weekly total, so a row counts as positive when its five-day sum is above zero.
- If a broker sets the triple-swap day to Saturday or Sunday, the extra charge is shown in the Friday column.
- For interest-rate swap modes, some brokers use a 365-day convention, so expect small differences.
- If no conversion pair is available for a currency-based swap, the figure is shown in its original currency. Check those rows against your broker's specification.
- The panel uses a fixed-width layout. On a very narrow chart window, widen the chart to see the weekly column in full.

REQUIREMENTS
- MetaTrader 5
- Any broker, account type and account currency
- Works on any symbol and timeframe. Attach to one chart; it reads all symbols from your selected source.

제작자의 제품 더 보기
True Move AD
Ebuka Francis Obiakor
True Move A/D The flow-level read. One line. Two combined signals. The standard Chaikin Accumulation/Distribution line uses a single factor — where the close sits within the bar's range. True Move A/D uses three, and weights them by their actual reliability. The composite formula: K = 0.3 × Midpoint Bias + 0.70 × Close-to-Close Direction The 70% weight on close-to-close momentum is deliberate. Where a candle closed relative to where it opened is the most consistent signal of genuine directiona
FREE
Close Open AD
Ebuka Francis Obiakor
Close-Open A/D (CO A/D): A Cumulative Volume-Efficiency Line for Accumulation/Distribution Analysis CO A/D is a cumulative Accumulation/Distribution-style indicator built around a simple question On-Balance Volume and Chaikin A/D don't directly ask: how efficiently did each bar convert its own volume into open-to-close travel? Formula CO_raw = (Close − Open) / (High − Low) Volume = Log(TickVolume + 1) [or raw volume — selectable] CO A/D = Previous CO A/D + (CO_raw × Volume) Where OBV assigns ful
FREE
Directional Impulse
Ebuka Francis Obiakor
Directional Impulse  One formula. Every candle. Instantly legible. Most indicators tell you where price is or how fast it's moving. Directional Impulse tells you something different: who won this candle, and by how much. Built on an original formula — X = (2C − H − L) × (H − L) & X = (C − O) x (H − L) — it multiplies directional bias by the bar's full range rather than normalising it away like every preceding indicator in this lineage. The result is a signed energy measure for each bar that ca
FREE
Equity Guard Dog: the guardrails your trading account is missing You’re probably not losing because you can’t read a chart. You’re losing because nothing stops you on the bad days: the oversized position, the third entry stacked on the same level, the revenge trade after a loss, the drawdown that creeps past the point you swore you’d stop. Equity Guard Dog is the discipline you wish you always had, running quietly on your MetaTrader 5 chart. It watches your entire account, enforces the rules you
BRIEF DESCRIPTION On-chart panel showing SL, TP, risk and RR for every position, with optional break-even and loss caps. FULL DESCRIPTION TradeMonitor puts all of your open positions and pending orders on one clean chart panel, so you can see exactly what you are risking and what you stand to make on every trade, in dollars. It does not open trades. It watches the trades you already have and, if you choose, helps protect them. SEE EVERY POSITION AT A GLANCE - Stop loss risk in account curren
Invalidation Line EA
Ebuka Francis Obiakor
SHORT DESCRIPTION Hide your stop loss on the chart. The EA closes only after confirmed candle closes, not wicks. FULL DESCRIPTION Have you ever widened your stop to give a trade more room, only to be stopped out and watch price reverse? Most traders have. Widening a stop makes your risk-reward worse, and a stop that sits at an obvious level is easy to wick through. Invalidation Line EA takes a different approach. Instead of a hard stop at the level, you draw a line where your trade idea is in
Average Entry Price Lines
Ebuka Francis Obiakor
Average Entry Price Lines draws one horizontal line at the volume-weighted average entry price of your open positions, with Buy and Sell calculated separately. When you are scaled into a position across several tickets, that single line tells you where the whole basket actually sits. With one position, the average collapses to that position's own entry, so the line lands exactly on it. What it draws Volume-weighted average entry per direction: avg = SUM(entry x lots) / SUM(lots) Optional project
FREE
필터:
리뷰 없음
리뷰 답변