Discussão | Local Trade Copier EA MT5 | Comprar Robô de Utilitário de negociação para MetaTrader 5

Eleni Anna Branou 2021.10.01 20:34 #1

This is the Quick Setup Video of Local Trade Copier EA MT4/5

Eleni Anna Branou 2021.11.04 11:56 #2

Dear friends and users of the Local Trade Copier EA MT4/5, I have published a new very useful troubleshooting guide with instructions and advice in the EA's setup and correct use.

You are welcomed to read it and let me know if you thing that I should include any other instructions or solutions about issues that may have encountered.

https://www.mql5.com/en/blogs/post/746561

Eleni Anna Branou 2021.12.07 10:43 #3

Dear friends,

Local Trade Copier EA MT5 was updated with the following improvements:

1. Partial closure algorithm was updated in order to address some issues and now works smoothly in all cases.

2. A Use Copying Expiration in Seconds: true/false option was added in order not to get in the way of copying current/already opened trades and missed trades that weren't copied after a network disruption.

3. Transmitter account apostrophe ' suffix will now be mapped automatically as all other prefixes/suffixes.

4. When both transmitter and receiver accounts use the same prefix/suffix, mapping will be done automatically, without the need of any special setup in the receiver account side.

5. 20 extra Special Symbols have been added, so a total of 30 Special Symbols are now available for cases of symbols and instruments that can't be mapped automatically or through the Prefix/Suffix of the Receiver Account setting.

Please update your Local Trade Copier EA MT5.

Eleni Anna Branou 2022.01.21 14:24 #4

Dear friends,

Local Trade Copier EA MT5 has been updated with the addition of Proportional Multiplier lot size calculation in Lot Size Types.

This new algorithm calculates the lot size of the receiver copied trades based on the balances of the transmitter and receiver account with an extra multiplier that can increase or decrease the final copied lot size.

The Proportional Multiplier value has been also added in the settings.

Please update your Local Trade Copier EA MT5.

Eleni Anna Branou 2022.03.08 11:40 #5

Dear friends,

Local Trade Copier EA MT5 has been updated with the following additions:

1. Magic Numbers to Copy setting has been added to make it easier to copy some magic numbers only, without the need to exclude all others in the Magic Numbers Not to Copy setting.

2. Symbols to Copy setting has been added to make it easier to copy some symbols only, without the need to exclude all others in the Symbols Not to Copy setting.

3. Copying Start Time and Copying End Time settings have been added, to allow time control of copying onto the receiver account.

4. Copy on Monday to Sunday true/false settings have been added to allow control over the days copying is allowed to the receiver account.

5. Maximum Spread in Points settings has been added to filter the copying of trades onto the receiver account, based on spread.

6. A Better Price Difference in Points setting has been added to make it possible to open copied receiver trades with a certain number of points improvement in opening price. For example if the transmitter buy open price is 1.08800 and this setting is 50, the receiver copied buy trade will be opened at 1.08750.

7. Custom Symbol Multipliers setting has been added, to allow different multipliers for various symbols, overriding the universal multiplier applied in the receiver settings. If for example a 2 multiplier has been set and in this setting you put: EURUSD3,GBPUSD4 the EURUSD receiver copied trades will be copied with a 3 multiplier and the GBPUSD trades with a 4 multiplier.

8. Minimum and Maximum Copying Lot Size settings have been added, to allow control over the minimum and maximum lot size that will be copied onto the receiver account. If for example you have a Maximum Copying Lot Size=5 setting and a receiver trade is about to be copied with a 7.50 lot size, it will be limited and opened as a 5 lots trade.

9. Ignore Copying Lot Size Below and Above settings have been added, to allow control over the size of trades that the user may not want to copy over the receiver account. So any size below or above these settings will NOT be copied at all.

10. Finally the option to use Virtual/Hidden TP, SL, BE and trailing SL levels has been added, to allow the user to hide these levels on the receiver account. There is also an option to show these virtual levels on chart, but this is only possible to the chart the Local Trade Copier EA MT5 is attached onto.

You can read all the details about these new settings in the Settings/Inputs guide: https://www.mql5.com/en/blogs/post/745681

Please update your Local Trade Copier EA MT5.

Eleni Anna Branou

Eleni Anna Branou 2022.05.01 16:34 #6

Dear friends,

Local Trade Copier EA MT5 has been updated with the following additions:

1. An extra option has been added to the Transmitter Comment setting, now the user can type the symbol @ in the transmitter side setup and the trade ID of the transmitter trades will be printed as a comment in the receiver copied trades.

2. An Allow TP/SL Manual Change true/false setting has been added that when it is true allow the user to modify the TP/SL levels of the copied receiver trades, after the transmitter TP/SL levels have been applied.

3. Finally Total Symbol Copied Volume and Total Account Copied Volume settings have been added, that give the user the opportunity to set total lot size limits for the receiver copied trades on symbol and account level.

For more details on these new settings please read carefully the settings/inputs guide: https://www.mql5.com/en/blogs/post/745681

Please update your Local Trade Copier EA MT5.

Eleni Anna Branou

Eleni Anna Branou 2022.06.03 13:05 #7

Dear friends,

Local Trade Copier EA MT5 has been updated with the following additions:

1. A Receiver Comment setting has been added, that gives the user the option to print the desired comment on the receiver account copied trades, overriding any transmitter comment.

2. Better Price option now allows the input of negative values, giving the user the opportunity to copy transmitter trades onto the receiver account, when a certain level or profit has been reached on the transmitter opened trades.

3. A Close All Copied Trades on certain day and time option has been added, that allows the user to close all receiver account copied trades at a specific day (or very day) and time.

4. Prefix and Suffix of the Transmitter Account settings have been added that make the copying from brokers with non dot prefixes and suffixes (like mEURUSD or EURUSDm) much easier. Automatic mapping of dot prefixes and suffixes (like r.EURUSD or EURUSD.r) continues to work as before.

For more details on these new settings please read carefully the settings/inputs guide: https://www.mql5.com/en/blogs/post/745681

Please update your Local Trade Copier MT5.

Eleni Anna Branou

Eleni Anna Branou 2022.08.14 12:52 #8

Hello dear friends,

Local Trade Copier EA MT5 has been updated:

1. New Basket settings in Money have been added to close all receiver account copied trades, when the desired Basket TP/SL in Money levels have been reached.

2. An issue with Better Price Difference in Points has been fixed and now Local Trade Copier EA MT5 applies the correct open price and TP/SL levels when Better Price is used, even when Opposite Logic is true or Pending Orders are placed.

3. Another issue that Local Trade Copier EA MT5 opened the transmitter trades again on the receiver account, if the computer was restarted, has been fixed.

Please update your Local Trade Copier EA MT5.

VIIIIX95 2022.09.25 23:51 #9

hello pls i made a mistake in renting the MT5 instead of the MT4 what do I do ?

Eleni Anna Branou 2022.09.26 09:09 #10

VIIIIX95 #:
hello pls i made a mistake in renting the MT5 instead of the MT4 what do I do ?

Hello, you can cancel your purhcase here if you haven't activated/installed it on the MT5 terminal and then purchase the MT4 version.

https://www.mql5.com/en/users/viiiix95/market

Eleni Anna Branou 2022.10.29 10:29 #11

Hello dear friends,

Local Trade Copier EA MT5 has been updated with the following improvements:

1. Comments to Copy and not to Copy settings have been added, to filter the receiver copied trades by the transmitter comment.

2. A new Lot Size Type option has been added, the Lot Size per 1000 of Balance, that allows you to apply your desired lot size based entirely on the receiver account's balance size.

3. Total Symbol Copied Trades and Total Account Copied Trades settings have been added, that give the option to limit the receiver copied trades by number.

4. A Max Drawdown % from Balance High setting has been added, that can close all receiver copied trades and disable copying when a certain drawdown value has been reached from the highest level of receiver account's balance.

5. A No Copying if Drawdown %> setting has been added that gives the option to suspend copying new trades on the receiver account if the current drawdown exceeds a certain level. Copying will resume when the drawdown level improves above the inserted value in this setting.

6. Closing of receiver copied trades due to basket or emergency account protection settings will be done following the FIFO rule from now on, making the Local Trade Copier EA MT5 FIFO compatible.

Please update your Local Trade Copier EA MT5

Eleni Anna Branou

ozcoz 2022.12.15 09:03 #12

Hi Eleni,

Nice clean piece of coding, well done.

I have been using this as a copier between two platforms and it works great, however I recently started using it for the self copier feature. It works fine until I partially close a trade. When a trade is partially closed, the EA will open another buy/sell at the level the partial close occurred. Could this be fixed please?

Thanks.

Eleni Anna Branou 2022.12.15 09:11 #13

ozcoz #:

Hi Eleni,

Nice clean piece of coding, well done.

I have been using this as a copier between two platforms and it works great, however I recently started using it for the self copier feature. It works fine until I partially close a trade. When a trade is partially closed, the EA will open another buy/sell at the level the partial close occurred. Could this be fixed please?

Thanks.

Hello, partial closure will work correctly in the coming update, due in a few days, so be a little patient please.

The way partial closure works now, gives the same profit/loss result in both sides, in the transmitter and receiver accounts, but will be updated to work as it usually works in the Metatrader terminal.

In this new update you will find 10 new features, like split copied trades in parts, take profit and stop loss multipliers, addition of lot size calculation on the copied trade in risk per trade in % of balance and risk per trade in money, the addition of TP/SL/BE and trailing SL of the copied trades in money and more...

Eleni Anna Branou 2022.12.19 11:23 #14

Dear friends,

Local Trade Copier EA MT5 had a major update with many changes and additions and I strongly advise you to make this update with no open trades on the receiver account side, when all receiver copied trades have been closed.

1. The opening/placement of copied trades/orders has been changed, applying TP/SL levels along with the trade opening. This will make trade copying even faster and will allow LTC to be used smoothly with prop firms.

2. The copy time settings format has been changed, allowing to put time periods that copying will be allowed, excluding specific times. For example if a user wants to pause copying 1 hour before and 1 hour after the NFP announcement on Friday (GMT+2 time) he can put Copy on Friday=00:00:00-14:30:00,16:30:00-23:59:59 and that way LTC will copy up to 14:30, then will pause copying until 16:30 and will copy normally again from 16:30 till midnight.

3. Take Profit and Stop Loss Multipliers have been added that will give the user the opportunity to increase or decrease the copied TP/SL levels of the original transmitter trades. These multipliers are 1 by default in order to copy the original TP/SL levels, but if the user puts for example Take Profit Multiplier=1.5 and Stop Loss Multiplier=2 the receiver copied trade will increase the applied take profit level by 150% and the applied stop loss level by 200%. In other words a 100 points transmitter TP will be copied as a 150 points receiver TP and a 200 points transmitter SL will be copied as a 400 points receiver SL.

4. Opposite Logic has been renamed Reverse Copying and a new Keep Original TP/SL Distances has been added that if it is true will apply the original transmitter TP/SL levels in points on the receiver opposite trade, but reversed of course. For example until now if a buy transmitter trade was opened with 100 points TP and 200 points SL, the opposite receiver trade was copied with a 100 points SL and 200 points TP, in order the receiver trade to close at the same time with the original transmitter trade. Now with Keep Original TP/SL Distances=true LTC will apply the original 100 points TP and 200 points SL on the receiver copied trade.

5. Two new lot size types have been added, Risk per Trade in % of Balance and Risk per Trade in Money. When any of these are selected the lot size of the receiver copied trades will be such that when the original SL is hit the receiver copied trade will lose a predefined by the user % of receiver account balance or a sum in money. These 2 new lot size types will work only if the receiver copied trades have a SL level of course, otherwise they can't be calculated properly.

6. A new Split Copied Trades in Parts setting has been added, which is 1 be default, giving the opportunity to copy the receiver copied trades in many lot size parts, overcoming brokers limitations in this area. If your broker has a small maximum lot size limit or the market liquidity is thin and you can't open large trades with their original lot size, you can split your receiver copied trades into smaller parts. If for example Split Copied Trades in Parts=3 a 1 lot transmitter trade with a Multiplier=1 lot size type setting in the receiver side, will be copied as three 0.33 0.33 and 0.34 trades.

7. Two new Ignore Transmitter Lot Size Below and Ignore Transmitter Lot Size Above settings have been added that will allow the user to filter the transmitter original trades by their lot size and to be copied or not on the receiver side.

8. Partial closure has been re-coded and will work perfectly and smoothly on the receiver copied trades from now on, exactly as it works on the transmitter side. Also partial closure can now be turned off if the user puts Apply Partial Closure=false in the receiver side settings.

9. Until now the user of LTC could apply its own TP/SL/BE and trailing SL levels in points onto the receiver copied trades. Now new TP/SL/BE and trailing SL levels in money have been added, making it easier to apply your desired TP/SL levels in account currency. These new levels in money will not work with the new Risk per Trade in % of Balance and Risk per Trade in Money lot size type settings, because its not possible to calculate the lot size and stop loss in money at the same time for a given copied trade. One variable of them has to be fixed.

10. A new Closing Copied Trades in Minutes setting has been added, that will allow the user to close each receiver copied trade after a certain number of minutes.

11. A No Copy if Transmitter Drawdown %> has been added that will allow the user to copy the transmitter original trades on the receiver side, only if the transmitter account has reach a certain drawdown. For example if No Copy if Transmitter Drawdown %>=5 the receiver account will start copying the transmitter trades only when the transmitter account drawdown exceeds the 5% level. If it does all transmitter trades will be copied, if later the transmitter drawdown goes below 5% new opened transmitter trades will not be copied until the transmitter drawdown goes above 5% again.

** I strongly advise you to make this update with no open trades on the receiver account side, when all receiver copied trades have been closed. **

Eleni Anna Branou

Eleni Anna Branou 2022.12.20 22:07 #15

How to Copy Deriv Volatility Indexes 0.001 trades

In order to copy trades with a lot size smaller than 0.01, like Deriv's Volatility Indexes, make sure that you put the following 4 settings to 0.0001 to allow the copying of 0.001 or 0.0001 trades. You will find the corresponding set file attached in this comment.

Arquivos anexados:

Local_Trade_Copier_EA_MT5_Deriv_Volatility_Indexes.set 7 kb

Chea Song Chiu 2022.12.28 11:17 #16

I saw the video it can copy form MT5 to MT4, but I can't install it or even find it on Mt4, what should I do

Eleni Anna Branou 2022.12.28 15:44 #17

songchiu0915 #:

I saw the video it can copy form MT5 to MT4, but I can't install it or even find it on Mt4, what should I do

Hello and thank you very much for your purchase.

If you want to copy from/to MT4 and MT5 terminals/accounts, you must purchase both MT4 and MT5 versions of Local Trade Copier EA MT4/5.

This is clearly mentioned in the product's description.

Chea Song Chiu 2022.12.28 17:19 #18

Eleni Anna Branou #:

Hello and thank you very much for your purchase.

If you want to copy from/to MT4 and MT5 terminals/accounts, you must purchase both MT4 and MT5 versions of Local Trade Copier EA MT4/5.

This is clearly mentioned in the product's description.

Alright, I get it, so both MT4 and MT5 also is your products and they will detect each other right?

Eleni Anna Branou 2022.12.28 17:21 #19

songchiu0915 #:

Alright, I get it, so both MT4 and MT5 also is your products and they will detect each other right?

Yes, exactly, the setup is the same whether you are copying between MT5>MT5 or MT5>MT4 or MT4>MT5.

This is the MT4 version: https://www.mql5.com/en/market/product/68950

Pannther 2023.01.23 15:58 #20

Hello, I have a question about the parameter "split copied trade in parts".

What if the receiving account has a limit of 100 lots per position and my sending account sends 200 lots?

Should I select 2 and the receiving account will take 2 trades with 100 lots each?

Thank you for your answer