Ichimoku Kumo Break
- 지표
-
Ich Khiem Nguyen
AlphaOnChart is now available on Android! If you trade and use an Android phone, do not miss this.
I just launched the Android version to help traders get ready-to-execute daily trade plans, key levels, and real-time M15 chart alerts right on their phones. - 버전: 1.0
- 활성화: 10
Ichimoku Kumo Break MT5
Algorithmic Trend Expansion Engine with Cloud Breakout and Tenkan/Kijun Momentum Confluence
The Ichimoku Kumo Break indicator for MetaTrader 5 provides an institutional-grade trend following system based on the classical Ichimoku Kinko Hyo framework. In traditional technical analysis, entering purely on a moving average cross often results in whipsaws during range-bound conditions, while trading solely on cloud breakouts frequently leads to late entries. This software resolves that dilemma by demanding simultaneous confluence: a decisive price breakout beyond the Ichimoku Cloud (Kumo) validated by a fresh, synchronized Tenkan-sen and Kijun-sen momentum crossover on the exact same candle close.
All calculations operate strictly on completed candle bars. Once confirmed upon bar close, signals, arrows, and projected management lines remain locked to their historical price bars and will never repaint, shift, or recalculate.
Algorithmic Logic and Trade Validation
The indicator computes the dynamic boundaries of the Kumo Cloud (Span A and Span B) alongside the Tenkan-sen (Conversion Line) and Kijun-sen (Base Line) using high-efficiency, handle-free mathematics optimized for multi-symbol operation.
Bullish Expansion Setup (BUY)
- Cloud Clearance: The signal candle must close strictly above the upper boundary of the Kumo Cloud ( Close > max(Senkou Span A, Senkou Span B) ), confirming that price has completely escaped the equilibrium zone.
- Synchronized TK Cross: Tenkan-sen crosses strictly above Kijun-sen on the current candle (previous bar: Tenkan ≤ Kijun ; current bar: Tenkan > Kijun ), confirming fresh upward acceleration.
- Simultaneous Execution: Both the cloud break and the bullish cross must occur concurrently on the closed bar.
- Operational Reference: The closing price of the qualifying candle serves as the operational entry level.
Bearish Expansion Setup (SELL)
- Cloud Clearance: The signal candle must close strictly below the lower boundary of the Kumo Cloud ( Close < min(Senkou Span A, Senkou Span B) ).
- Synchronized TK Cross: Tenkan-sen crosses strictly below Kijun-sen on the current candle (previous bar: Tenkan ≥ Kijun ; current bar: Tenkan < Kijun ).
- Simultaneous Execution: Both conditions must align at the exact same bar close.
- Operational Reference: The closing price of the qualifying candle serves as the operational entry level.
Integrated Risk Architecture and Trade Lifecycle
Immediately upon signal confirmation, the system projects a structured trade lifecycle plan directly onto the active chart:
- Structural Invalidation (Stop Loss): Positioned beyond the extreme wick of the breakout signal candle (Low for BUY, High for SELL), fortified with an integrated ATR volatility buffer (~0.1x ATR) to defend against spread expansion. If market price re-enters the breakout bar range, the structural hypothesis is immediately invalidated.
- Standardized R-Multiple Targets: Four progressive Take Profit objectives calculated as exact multiples of the initial risk distance (TP1: 1.0R, TP2: 2.0R, TP3: 3.0R, TP4: 4.0R).
- Visual Lifecycle Machine: Dynamically paints entry lines, protective stops, target ladders, and visual risk/reward zone shading. Completed setups remain permanently visible for historical analysis.
Core Modules and Analytical Features
- Multi-Symbol & Multi-Timeframe Scan Radar: A built-in dashboard monitors up to 100 instruments simultaneously across M15, M30, H1, H4, and D1, providing immediate visual awareness of cloud alignment and active signals from a single chart.
- Handle-Free Mathematical Architecture: Calculates all Ichimoku components natively via direct bar arrays without relying on terminal indicator handles, ensuring zero lag, reduced memory overhead, and smooth multi-asset scanning.
- Trend Alignment Filter Gate: Allows traders to restrict setups to align with higher-timeframe EMA trend direction.
- Alert Dispatcher: Native pop-up alerts, sound notifications, and instant push notifications to mobile MetaTrader terminals.
Complete Input Parameters & Trader Manual
All settings are organized below by functional groups as displayed in the MetaTrader 5 Inputs dialog. Adjust these parameters to fine-tune signal sensitivity and trade management.
1. Ichimoku Core Engine & Signal Parameters
Governs the periods for cloud boundaries and momentum crossover detection.
| Setting Name (In MT5) | Default | How It Affects Your Trading & Setup Guide |
|---|---|---|
| Tenkan-sen period | 9 | Conversion Line averaging period (short-term momentum). Traditional baseline is 9. Lower values trigger faster crosses; higher values smooth out choppy price action. |
| Kijun-sen period | 26 | Base Line averaging period (medium-term trend baseline). Acts as the primary dynamic equilibrium level. |
| Senkou Span B period | 52 | Long-term cycle period used to project the thicker boundary of the Kumo Cloud. 52 periods represents classical Ichimoku market structure. |
| Fast EMA (cell trend color) | 9 | Short-term moving average period used to evaluate trend bias for dashboard cell coloration. |
| Slow EMA (cell trend color) | 26 | Long-term moving average baseline for dashboard trend coloration. |
| ATR period | 14 | Averaging period for the Average True Range volatility metric, used to scale stop-loss padding and trend strength normalization. |
| Swing lookback for SL (bars) | 10 | Lookback window used to verify technical clearance and swing boundaries around the trigger bar. |
2. Stop Loss & Take Profit Target Ladders
Defines risk boundaries and progressive reward-to-risk (R:R) exit targets.
| Setting Name (In MT5) | Default | How It Affects Your Trading & Setup Guide |
|---|---|---|
| Stop Loss distance (x ATR) | 3.0 | Maximum volatility ceiling for the protective Stop Loss. Prevents excessively wide stops during sudden news spikes. |
| Early-exit SL (x R) | 1.0 | Fraction of initial risk distance where a trade is considered invalidated if momentum decisively reverses. |
| Take Profit 1 (R:R) | 1.0 | First reward-to-risk target (1.0x risk distance). Ideal for partial profit-taking or securing the trade at breakeven. Set to 0 to disable. |
| Take Profit 2 (R:R) | 2.0 | Primary liquidity target (2.0x risk distance), balancing high probability with healthy payout ratio. |
| Take Profit 3 (R:R) | 3.0 | Extended target (3.0x risk distance) designed for sustained trend continuation regimes. |
| Take Profit 4 (R:R) | 4.0 | Maximum runner target (4.0x risk distance). Marks the completion of the trade cycle. |
| Enable TP1 ping-pong re-entry | true | When enabled, allows the system to recognize secondary trend expansion setups after TP1 has been successfully achieved. |
3. Multi-Symbol & Multi-Timeframe Scan Radar
Controls watchlist monitoring across instruments and timeframes from a single screen.
| Setting Name (In MT5) | Default | How It Affects Your Trading & Setup Guide |
|---|---|---|
| Scan multiple symbols & timeframes | true | Master toggle for the on-chart scan table. Disable (false) if you want the indicator to focus exclusively on the active chart. |
| Scan all Market Watch symbols | false | When true, scans every pair visible in your Market Watch. When false, scans only the symbols specified in the input field below. |
| Symbol list, comma separated | (Empty) | Custom list of instruments to monitor (e.g. EURUSD,GBPUSD,USDJPY,XAUUSD,BTCUSD ). Leaving this blank monitors the current chart symbol only. |
| Hard cap on the symbol list | 100 | Safety throttle to prevent terminal resource overload when working with extensive broker symbol lists. |
| Timeframes | M15,M30,H1,H4,D1 | Timeframe horizons evaluated by the scan radar matrix. |
| Only take signals in trend direction | true | Trend Filter Gate: When enabled, signals are filtered to align strictly with the dominant trend (BUY only in uptrends; SELL only in downtrends). Recommended to keep enabled for breakout continuation setups. |
4. Visual Chart Display & Historical Depth
Configures chart aesthetics, visual zones, and history depth.
| Setting Name (In MT5) | Default | How It Affects Your Trading & Setup Guide |
|---|---|---|
| Chart history to scan (bars) | 3000 | Number of historical candles loaded upon attachment. Lowering this value (e.g. to 1000) improves initial chart loading speed. |
| Show last N setups | 0 | Number of setups drawn on chart. Set to 0 to retain all historical setups, or specify a number (e.g. 5 ) to keep charts completely uncluttered. |
| Shade risk/reward zones | true | Draws visual semi-transparent color bands for the risk zone (red) and profit progression zones (green). |
| Draw ONLY recommended TP line | false | When enabled, hides intermediate TP lines and only renders the primary target line for clean chart aesthetics. |
| Show win-rate panel | true | Displays the floating summary dashboard showing historical distribution across TP1–TP4. |
5. Alert Notifications
Instant notification delivery when a setup confirms at candle close.
| Setting Name (In MT5) | Default | How It Affects Your Trading & Setup Guide |
|---|---|---|
| Enable alerts | false | Master toggle for alert notifications. Set to true to activate real-time signaling. |
| Popup window | true | Triggers a standard MetaTrader 5 dialog box with instrument, timeframe, and entry details. |
| Sound | false | Plays an audible terminal alert (.wav file) upon trigger confirmation. |
| Push to phone | false | Sends push notifications to your mobile MetaTrader 5 app (requires MetaQuotes ID configured in terminal settings). |
6. Automated Trading Integration (Companion EA)
Connection parameters for linking the indicator to an automated execution robot.
| Setting Name (In MT5) | Default | How It Affects Your Trading & Setup Guide |
|---|---|---|
| Send signals to the auto-trade EA | true | Transmits verified signal data into terminal GlobalVariables for automated execution by compatible EAs. |
| Signal ID (Magic Number) | 924010 | Unique identifier matching the indicator with your automated robot. Must match the Producer Magic setting in your EA. |
Operational Environment and Technical Notices
- Classical Period Integrity: The default settings (9, 26, 52) reflect the standard mathematical cycles designed for daily and 4-hour market structure. While functional on lower timeframes (M15, M30), signals on H1, H4, and D1 carry inherently higher statistical reliability.
- Thin Cloud (Kumo Senkou Twist) Considerations: When Senkou Span A and Span B are nearly equal, the Kumo cloud becomes narrow. While breakouts occur more easily through thin clouds, support/resistance density is lower; traders should evaluate broad market context during thin-cloud phases.
- Recommended Assets: Highly trending assets including Spot Gold (XAUUSD), major forex pairs (EURUSD, USDJPY, GBPUSD), and liquid equity indices. Prolonged tight consolidation markets should be avoided.
- Account Compatibility: Fully operational across both Netting and Hedging MetaTrader 5 account types with standard or ECN execution.
- Statistical Notice: Technical indicators are analytical decision-support tools. Historical or simulated backtest results do not constitute a guarantee of future operational performance. Always implement disciplined risk management and position sizing.
Technical Support and Demo Evaluation
- Traders are invited to evaluate functionality in the built-in MetaTrader 5 Strategy Tester using the official free demo version available directly on this page.
- For inquiries, feature explanations, or setup guidance, please communicate exclusively through the MQL5 Comments tab or via MQL5 Direct Messaging.
