CREATE A ROBOT/EA BASED ON DEFINED GAPS AND TRENDLINE POSITION

İş Gereklilikleri

Hello Everyone,

I am seeking a professional and passionate developer to help with my Forex trading strategy on both MT4 and MT5. Currently shown above is my report for February which I will explain to help identify how the EA/ Robot will work. As shown above is price movements between Highs and Lows where RED is HIGH and GREEN is LOW prices. The Robot will identify the HIGH and LOW positions based on the 1. market price movements, 2. Trendline price, 3. DEFINED GAP, 4. BENEFIT GAP( Can be % of DEFINED GAP or absolute price) and 5. TRENDLINE DIRECTION (UP/DOWN).

The Robot will plan for trading only when the prices have crossed the trendline and a certain Defined GAP has been achieved based on last price position at the other extreme of the TRENDLINE. After the DEFINED GAP has been achieved and market still goes against the moves, then new bids will start to activate at the BENEFIT GAP after achieving the DEFINED GAP.  If prices have activated and didn’t cross the TRENDLINE, then it will still use the last extreme price to continue to calculate the positions until it crosses or meets the DEFINED GAP at the new position.  The DEFINED GAP bid must ALWAYS activate at the opposite side of the CURRENT BID. So if the CURRENT BID is above the TRENDLINE and a SELL, then the BUY must be at a PRICE achieved with the DEFINED GAP and Below the TRENDLINE for a BUY to activate. Also note that lot sizes of Benefit gaps will increase either as addition or multiplication.

example of data


EXAMPLES

AUDJPY     Defined GAP= 2, Benefit Gap= 50% of defined gap=1, Trendline direction is UP.

So at High price of 81.48, then first defined bid will activate at 81.48-2(defined gap)= 79.48. However price stopped at 80.36, which is below the trendline. Then ROBOT will identify 80.36 and plan for a SELL bid which must achieve the Defined GAP and also be at the opposite side of the Trendline. So the next bid will be 80.36(LOW) + 2(GAP) =82.36 (which must be above the trendline) and price went above to 84, so 82.36 (Defined Bid) + 1(Benefit Gap)= 83.36 (Benefit Bid 1), Benefit Bid 2 would have been Benefit bid 1 (83.36) + Benefit Gap (1)= 84.36 (but not achieved). So only 2 SELL bids will activate. Then at 84 (HIGHEST PRICE After bid) it will plan a BUY at 84- Defined bid (2)= 82 for a BUY, which must also be below the trendline. While Benefit bid would have activated at 82-1= 81 (but price didn’t reach it. So once the Defined new bid has been activated, it will close all previous bids and then plan for the new direction. So since the LOW is 81.53, then only a BUY price of 82 will activate and all SELL at 82.36 and 83.36 will close. With the current Low at 81.53, the next DEFINED BID will activate at 81.53+2= 83.53. Current High is 83.34. and so only BUY bid at 81.53 will be active.

 

NASDAQ     Defined GAP= 600, Benefit Gap= 30% of defined gap=180, Trendline direction is DOWN.

So at High price of 14515, then first defined bid will activate at 14515 - 600(defined gap)= 13915. However price stopped at 14219, which is below the trendline. Then ROBOT will identify 14219 (based on current LOW) and plan for a SELL bid which must achieve the Defined GAP and also be at the opposite side of the Trendline, ie above the trendline as current position is below the trendline.  So the next bid will be 14219(LOW) + 600( Defined GAP)=14819 (which must be above the trendline) and price went above to 15280, so 14819 (Defined Bid) + 180(Benefit Gap)= 14999 (Benefit Bid 1), Benefit Bid 2 will be Benefit bid 1 (14999) + Benefit Gap (180)= 15179. Benefit Bid 3 would   have been Benefit bid 2 (15179) + Benefit Gap (180)= 15359 (but not achieved). So only 3 SELL bids will activate. Then at 15280 (HIGHEST PRICE After bid) it will plan a BUY at 15280- Defined bid (600)= 14680 for a BUY, which must also be below the trendline. While Benefit bid 1 will activate at 14680 (Defined bid) – 180 (Benefit Gap)= 14500. So Benefit Bid 2 of BUY would have activated at 14500-180= 14320 (but price didn’t reach it, as it stopped at 14370). So once the Defined new bid has been activated, it will close all previous bids and then plan for the new direction. So since the LOW is 14370, then only a BUY price of 14680, and 14500 will activate, while the previous SELL bids at 14819, 14999 and 15179 will close at or below the Defined BUY bid. If Defined BUY bid is above the TRENDLINE, then the first Buy bid will activate at the trendline PRICE. With the current Low at 14370, the next DEFINED BID will activate at 14370+ 600 = 14970. Current High is 15065. and so Benefit bid would have activated at 14970 + 180= 15150 (but nit reached as Highest was 15050) . So the next bid will be at 15065 (Current HIGHEST PRICE) – Defined bid (600)=  14465 for a BUY which must also be below the trendline. Benefit Bid 1 will activate at 14465 (Defined bid) – 180 (Benefit Gap)= 14285. So Benefit Bid 2 of BUY will activate at 14285 -180= 14105. Benefit Bid 3 of BUY would have activated at 14105 -180= 13925 (but price didn’t reach it, as it stopped at 14040). So once the Defined new bid has been activated, it will close all previous bids and then plan for the new direction. So since the LOW is 14040, then only have BUY bids at price of 14285, and 14105 will activate, while the previous SELL bid at 14970 will close at or below the Defined BUY bid or trendline.

At LOW of 14040, then next positions will be a SELL at 14040+600= 14640 (Defined Bid), 14640+180= 14820 (Benefit bid 1, but price didn’t reach it as it stopped at 14680),

At HIGH of 14680, then next positions will be a Defined bid at 14680-600= 14080, Benefit bid 1 will be 14080-180= 13900, therefore benefit BUY bid will not activate as current Lowest price is 13910.

 

Please only Developers who have understood the logic of the trading concept should bid for it and also note that the payments will only be fully paid after it has been fully tested and certified by me to work according to the above logic.

 

I have attached additional pictures to test the bid logic movements.

 

You can see the DEFINED GAP as MINGAP in Picture 2.

 

Thanks


Yanıtlandı

1
Geliştirici 1
Derecelendirme
(9)
Projeler
19
16%
Arabuluculuk
3
67% / 0%
Süresi dolmuş
0
Serbest
2
Geliştirici 2
Derecelendirme
(77)
Projeler
242
74%
Arabuluculuk
7
100% / 0%
Süresi dolmuş
1
0%
Çalışıyor
Yayınlandı: 1 makale
3
Geliştirici 3
Derecelendirme
(5)
Projeler
6
0%
Arabuluculuk
3
0% / 100%
Süresi dolmuş
0
Serbest
4
Geliştirici 4
Derecelendirme
(69)
Projeler
146
34%
Arabuluculuk
13
8% / 62%
Süresi dolmuş
26
18%
Serbest
Yayınlandı: 6 kod
Benzer siparişler
I need a AI signal generating bot for forex trading that use the latest ai technology to track real time forex market, analyse and give signals. The bot should operate such that when i put it in a chart it will analyse the market, after several minutes it will display whether the trade is buying or selling. It should display the one minute, five minute,15minute, 30 minute, one hour, 4 hours and daily time frame
I need a fully automated end-to-end system where a backend continuously runs my deterministic CORE EDGE validator on live market data, generates numeric JSON trade tickets (GO) or alert levels (NO-GO), and automatically pushes those instructions to the MT5 EA for execution. There are no manual signals. ROLE SPLIT (IMPORTANT) Backend (analysis & decision engine): Continuously evaluates live data using my CORE EDGE
step by step and structure this into a full IEEE 830 / ISO/IEC/IEEE 29148 style Requirements Specification. This format will include: Introduction System Overview Functional and Performance Requirements Traceability Matrix (linking requirements to test cases) Verification and Validation Compliance Standards 1. Introduction 1.1 Purpose The purpose of this document is to define the technical requirements for the
i need an expert to help join 3 model i have in ninjatrader into one, kindly message me and i will be expecting from you and i need this work done in maximum of 4 days, so i need expert that can get it done
BitsoFx 40 - 10000 USD
//+------------------------------------------------------------------+ //| Simple Robo Trader MT5 | //| Works on any pair & timeframe | //+------------------------------------------------------------------+ #property strict // Input settings input double LotSize = 0.01; input int FastMA = 10; input int SlowMA = 30; input int RSIPeriod = 14; input int StopLoss = 200; // in points input int TakeProfit = 400;// in
I am looking for an experienced MQL5 developer to convert a complex TradingView Pine Script (will provide the script from tradingview) into a fully automated MT5 Expert Advisor -bot. The TradingView script includes: Market Structure (BOS, CHoCH, Swing BOS) Strong / Weak High & Low Equilibrium (Premium / Discount zones) Volumetric Order Blocks Fair Value Gaps (FVG / VI / OG) Accumulation & Distribution zones Equal
// Add this to your EA after ExportState() function void SendToBase44(const string state, const string dir, double entry, double sl, double tp) { string url = " https://preview-sandbox--ee0a32a725b788974de435e8cef40b7a.base44.app/api/functions/receiveEAState "; string headers = "Content-Type: application/json\r\n"; string json = "{" "\"symbol\":\""+_Symbol+"\","
1.Sinyal Perdagangan : Sinyal beli: garis MACD utama memotong garis sinyal ke atas (macd_current>signal_current && macd_previous<signal_previous). Sinyal jual: garis MACD utama memotong garis sinyal ke bawah (macd_current<signal_current && macd_previous>signal_previous). Gambar di bawah menunjukkan kasus beli dan jual. 2. Posisi ditutup pada sinyal yang berlawanan: Posisi beli ditutup pada sinyal jual, dan posisi

Proje bilgisi

Bütçe
30 - 50 USD