CREATE A ROBOT/EA BASED ON DEFINED GAPS AND TRENDLINE POSITION

Tarea técnica

Hello Everyone,

I am seeking a professional and passionate developer to help with my Forex trading strategy on both MT4 and MT5. Currently shown above is my report for February which I will explain to help identify how the EA/ Robot will work. As shown above is price movements between Highs and Lows where RED is HIGH and GREEN is LOW prices. The Robot will identify the HIGH and LOW positions based on the 1. market price movements, 2. Trendline price, 3. DEFINED GAP, 4. BENEFIT GAP( Can be % of DEFINED GAP or absolute price) and 5. TRENDLINE DIRECTION (UP/DOWN).

The Robot will plan for trading only when the prices have crossed the trendline and a certain Defined GAP has been achieved based on last price position at the other extreme of the TRENDLINE. After the DEFINED GAP has been achieved and market still goes against the moves, then new bids will start to activate at the BENEFIT GAP after achieving the DEFINED GAP.  If prices have activated and didn’t cross the TRENDLINE, then it will still use the last extreme price to continue to calculate the positions until it crosses or meets the DEFINED GAP at the new position.  The DEFINED GAP bid must ALWAYS activate at the opposite side of the CURRENT BID. So if the CURRENT BID is above the TRENDLINE and a SELL, then the BUY must be at a PRICE achieved with the DEFINED GAP and Below the TRENDLINE for a BUY to activate. Also note that lot sizes of Benefit gaps will increase either as addition or multiplication.

example of data


EXAMPLES

AUDJPY     Defined GAP= 2, Benefit Gap= 50% of defined gap=1, Trendline direction is UP.

So at High price of 81.48, then first defined bid will activate at 81.48-2(defined gap)= 79.48. However price stopped at 80.36, which is below the trendline. Then ROBOT will identify 80.36 and plan for a SELL bid which must achieve the Defined GAP and also be at the opposite side of the Trendline. So the next bid will be 80.36(LOW) + 2(GAP) =82.36 (which must be above the trendline) and price went above to 84, so 82.36 (Defined Bid) + 1(Benefit Gap)= 83.36 (Benefit Bid 1), Benefit Bid 2 would have been Benefit bid 1 (83.36) + Benefit Gap (1)= 84.36 (but not achieved). So only 2 SELL bids will activate. Then at 84 (HIGHEST PRICE After bid) it will plan a BUY at 84- Defined bid (2)= 82 for a BUY, which must also be below the trendline. While Benefit bid would have activated at 82-1= 81 (but price didn’t reach it. So once the Defined new bid has been activated, it will close all previous bids and then plan for the new direction. So since the LOW is 81.53, then only a BUY price of 82 will activate and all SELL at 82.36 and 83.36 will close. With the current Low at 81.53, the next DEFINED BID will activate at 81.53+2= 83.53. Current High is 83.34. and so only BUY bid at 81.53 will be active.

 

NASDAQ     Defined GAP= 600, Benefit Gap= 30% of defined gap=180, Trendline direction is DOWN.

So at High price of 14515, then first defined bid will activate at 14515 - 600(defined gap)= 13915. However price stopped at 14219, which is below the trendline. Then ROBOT will identify 14219 (based on current LOW) and plan for a SELL bid which must achieve the Defined GAP and also be at the opposite side of the Trendline, ie above the trendline as current position is below the trendline.  So the next bid will be 14219(LOW) + 600( Defined GAP)=14819 (which must be above the trendline) and price went above to 15280, so 14819 (Defined Bid) + 180(Benefit Gap)= 14999 (Benefit Bid 1), Benefit Bid 2 will be Benefit bid 1 (14999) + Benefit Gap (180)= 15179. Benefit Bid 3 would   have been Benefit bid 2 (15179) + Benefit Gap (180)= 15359 (but not achieved). So only 3 SELL bids will activate. Then at 15280 (HIGHEST PRICE After bid) it will plan a BUY at 15280- Defined bid (600)= 14680 for a BUY, which must also be below the trendline. While Benefit bid 1 will activate at 14680 (Defined bid) – 180 (Benefit Gap)= 14500. So Benefit Bid 2 of BUY would have activated at 14500-180= 14320 (but price didn’t reach it, as it stopped at 14370). So once the Defined new bid has been activated, it will close all previous bids and then plan for the new direction. So since the LOW is 14370, then only a BUY price of 14680, and 14500 will activate, while the previous SELL bids at 14819, 14999 and 15179 will close at or below the Defined BUY bid. If Defined BUY bid is above the TRENDLINE, then the first Buy bid will activate at the trendline PRICE. With the current Low at 14370, the next DEFINED BID will activate at 14370+ 600 = 14970. Current High is 15065. and so Benefit bid would have activated at 14970 + 180= 15150 (but nit reached as Highest was 15050) . So the next bid will be at 15065 (Current HIGHEST PRICE) – Defined bid (600)=  14465 for a BUY which must also be below the trendline. Benefit Bid 1 will activate at 14465 (Defined bid) – 180 (Benefit Gap)= 14285. So Benefit Bid 2 of BUY will activate at 14285 -180= 14105. Benefit Bid 3 of BUY would have activated at 14105 -180= 13925 (but price didn’t reach it, as it stopped at 14040). So once the Defined new bid has been activated, it will close all previous bids and then plan for the new direction. So since the LOW is 14040, then only have BUY bids at price of 14285, and 14105 will activate, while the previous SELL bid at 14970 will close at or below the Defined BUY bid or trendline.

At LOW of 14040, then next positions will be a SELL at 14040+600= 14640 (Defined Bid), 14640+180= 14820 (Benefit bid 1, but price didn’t reach it as it stopped at 14680),

At HIGH of 14680, then next positions will be a Defined bid at 14680-600= 14080, Benefit bid 1 will be 14080-180= 13900, therefore benefit BUY bid will not activate as current Lowest price is 13910.

 

Please only Developers who have understood the logic of the trading concept should bid for it and also note that the payments will only be fully paid after it has been fully tested and certified by me to work according to the above logic.

 

I have attached additional pictures to test the bid logic movements.

 

You can see the DEFINED GAP as MINGAP in Picture 2.

 

Thanks


Archivos adjuntos:

Han respondido

1
Desarrollador 1
Evaluación
(9)
Proyectos
19
16%
Arbitraje
3
67% / 0%
Caducado
0
Libre
2
Desarrollador 2
Evaluación
(77)
Proyectos
240
73%
Arbitraje
7
100% / 0%
Caducado
1
0%
Libre
3
Desarrollador 3
Evaluación
(5)
Proyectos
6
0%
Arbitraje
3
0% / 100%
Caducado
0
Libre
4
Desarrollador 4
Evaluación
(69)
Proyectos
146
34%
Arbitraje
13
8% / 62%
Caducado
26
18%
Libre
Ha publicado: 6 ejemplos
Solicitudes similares
I have an issue with my ninja script and i would like you to help me straighten things I wanted to create an indicator and i have the source code already but i am getting compiling errors on my NinjaTrader And i tried fixing the error it still same I sent 3 images here for you to understand the errors and i would like to ask if you can help me fix it so i can go ahead and compile my source code. Thanks
Good day, I would like to build an automated trading system for Ninjatrader using 2 MACD, a Supertrend, and a moving average indicator. I want the option to adjust the indicator settings, the ability to trade at three different times, and the option to receive alerts. I want to get an idea of what that will cost me. It will enter trades on all blue take one contract out at a fixed point, move the stop to break even
I need an MQL5 indicator that identifies reversals without repainting or placing signals with an offset. The goal is to minimize lag and reduce whipsaw trades. Desired results are similar to the attached image. Requirements: - No repainting - No signal offset - Emphasis on reducing lag - MQL5 compatible - Clear, concise code If you have the expertise to create a reliable, high-performance indicator, let's discuss
I'm looking for a skilled trader/developer to share a proven scalping strategy on M1-M5 timeframes without using Martingale, Grid trading, or Hedge. Requirements: - Minimum trade duration: 2 minutes - Lot size: <20 - Proof of skill: Provide MT4/MT5 trade history report (PDF/HTML) - No High Frequency Trades - GMT+1 timezone, flexible hours - Price negotiable, performance-based compensation possible If you're a
Good day, I would like to build an automated trading system for Ninjatrader using 2 MACD, a Supertrend, and a moving average indicator. I want the option to adjust the indicator settings, the ability to trade at three different times, and the option to receive alerts. I want to get an idea of what that will cost me. It will enter trades on all blue take one contract out at a fixed point, move the stop to break even
I have an indicator i need automated i use it manually and it plots arrows. Can you automate it for my Ninjatrader8? Do you need to see file? Expert Ninjatrader Developer can Bid for this project
Hi! I need a trading bot/robot to automate my trades. I don't need much complicated bot. I want it to enter, exit trade and can do this in matter of second or multiple times in a second. Should be able to adjust, put SL/TP in the same menu. Would appreciate your ideas! Please write to me before anything else
Hi, im not looking into developing a new EA. I am looking into purchasing an existing EA that can deliver such results like: mq5 source, 4‑year backtest (2022‑2025) report, equity curve, trade list, strategy description, and 1‑month demo access. Please without concrete prove of experience functioning existing EA working perfectly and as contained on my description, then we can't strike a deal. Thank you
Title: Ultimate Quantum EA V1.01 | Dynamic Hedge Recovery System Description: Professional automated trading system designed for high-precision execution and advanced risk management. Key Features: Dynamic Hedge Recovery: Automatically manages losing trades by opening calculated hedge positions (2x-3x) to exit in total profit. Basket Profit Management: Closes all open positions once the total dollar profit target is
I am looking for an experienced MT5 (MQL5) Expert Advisor developer to fix a chart distortion / corruption issue in my existing EA ( EA ALPHA ). Issue Description When the EA is attached to the chart on a specific broker (ATFX), the chart becomes visually distorted The distortion appears on the left-hand side / historical area of the chart The same EA works correctly on other brokers (e.g. CFI) A previous developer

Información sobre el proyecto

Presupuesto
30 - 50 USD