CREATE A ROBOT/EA BASED ON DEFINED GAPS AND TRENDLINE POSITION

Specifiche

Hello Everyone,

I am seeking a professional and passionate developer to help with my Forex trading strategy on both MT4 and MT5. Currently shown above is my report for February which I will explain to help identify how the EA/ Robot will work. As shown above is price movements between Highs and Lows where RED is HIGH and GREEN is LOW prices. The Robot will identify the HIGH and LOW positions based on the 1. market price movements, 2. Trendline price, 3. DEFINED GAP, 4. BENEFIT GAP( Can be % of DEFINED GAP or absolute price) and 5. TRENDLINE DIRECTION (UP/DOWN).

The Robot will plan for trading only when the prices have crossed the trendline and a certain Defined GAP has been achieved based on last price position at the other extreme of the TRENDLINE. After the DEFINED GAP has been achieved and market still goes against the moves, then new bids will start to activate at the BENEFIT GAP after achieving the DEFINED GAP.  If prices have activated and didn’t cross the TRENDLINE, then it will still use the last extreme price to continue to calculate the positions until it crosses or meets the DEFINED GAP at the new position.  The DEFINED GAP bid must ALWAYS activate at the opposite side of the CURRENT BID. So if the CURRENT BID is above the TRENDLINE and a SELL, then the BUY must be at a PRICE achieved with the DEFINED GAP and Below the TRENDLINE for a BUY to activate. Also note that lot sizes of Benefit gaps will increase either as addition or multiplication.

example of data


EXAMPLES

AUDJPY     Defined GAP= 2, Benefit Gap= 50% of defined gap=1, Trendline direction is UP.

So at High price of 81.48, then first defined bid will activate at 81.48-2(defined gap)= 79.48. However price stopped at 80.36, which is below the trendline. Then ROBOT will identify 80.36 and plan for a SELL bid which must achieve the Defined GAP and also be at the opposite side of the Trendline. So the next bid will be 80.36(LOW) + 2(GAP) =82.36 (which must be above the trendline) and price went above to 84, so 82.36 (Defined Bid) + 1(Benefit Gap)= 83.36 (Benefit Bid 1), Benefit Bid 2 would have been Benefit bid 1 (83.36) + Benefit Gap (1)= 84.36 (but not achieved). So only 2 SELL bids will activate. Then at 84 (HIGHEST PRICE After bid) it will plan a BUY at 84- Defined bid (2)= 82 for a BUY, which must also be below the trendline. While Benefit bid would have activated at 82-1= 81 (but price didn’t reach it. So once the Defined new bid has been activated, it will close all previous bids and then plan for the new direction. So since the LOW is 81.53, then only a BUY price of 82 will activate and all SELL at 82.36 and 83.36 will close. With the current Low at 81.53, the next DEFINED BID will activate at 81.53+2= 83.53. Current High is 83.34. and so only BUY bid at 81.53 will be active.

 

NASDAQ     Defined GAP= 600, Benefit Gap= 30% of defined gap=180, Trendline direction is DOWN.

So at High price of 14515, then first defined bid will activate at 14515 - 600(defined gap)= 13915. However price stopped at 14219, which is below the trendline. Then ROBOT will identify 14219 (based on current LOW) and plan for a SELL bid which must achieve the Defined GAP and also be at the opposite side of the Trendline, ie above the trendline as current position is below the trendline.  So the next bid will be 14219(LOW) + 600( Defined GAP)=14819 (which must be above the trendline) and price went above to 15280, so 14819 (Defined Bid) + 180(Benefit Gap)= 14999 (Benefit Bid 1), Benefit Bid 2 will be Benefit bid 1 (14999) + Benefit Gap (180)= 15179. Benefit Bid 3 would   have been Benefit bid 2 (15179) + Benefit Gap (180)= 15359 (but not achieved). So only 3 SELL bids will activate. Then at 15280 (HIGHEST PRICE After bid) it will plan a BUY at 15280- Defined bid (600)= 14680 for a BUY, which must also be below the trendline. While Benefit bid 1 will activate at 14680 (Defined bid) – 180 (Benefit Gap)= 14500. So Benefit Bid 2 of BUY would have activated at 14500-180= 14320 (but price didn’t reach it, as it stopped at 14370). So once the Defined new bid has been activated, it will close all previous bids and then plan for the new direction. So since the LOW is 14370, then only a BUY price of 14680, and 14500 will activate, while the previous SELL bids at 14819, 14999 and 15179 will close at or below the Defined BUY bid. If Defined BUY bid is above the TRENDLINE, then the first Buy bid will activate at the trendline PRICE. With the current Low at 14370, the next DEFINED BID will activate at 14370+ 600 = 14970. Current High is 15065. and so Benefit bid would have activated at 14970 + 180= 15150 (but nit reached as Highest was 15050) . So the next bid will be at 15065 (Current HIGHEST PRICE) – Defined bid (600)=  14465 for a BUY which must also be below the trendline. Benefit Bid 1 will activate at 14465 (Defined bid) – 180 (Benefit Gap)= 14285. So Benefit Bid 2 of BUY will activate at 14285 -180= 14105. Benefit Bid 3 of BUY would have activated at 14105 -180= 13925 (but price didn’t reach it, as it stopped at 14040). So once the Defined new bid has been activated, it will close all previous bids and then plan for the new direction. So since the LOW is 14040, then only have BUY bids at price of 14285, and 14105 will activate, while the previous SELL bid at 14970 will close at or below the Defined BUY bid or trendline.

At LOW of 14040, then next positions will be a SELL at 14040+600= 14640 (Defined Bid), 14640+180= 14820 (Benefit bid 1, but price didn’t reach it as it stopped at 14680),

At HIGH of 14680, then next positions will be a Defined bid at 14680-600= 14080, Benefit bid 1 will be 14080-180= 13900, therefore benefit BUY bid will not activate as current Lowest price is 13910.

 

Please only Developers who have understood the logic of the trading concept should bid for it and also note that the payments will only be fully paid after it has been fully tested and certified by me to work according to the above logic.

 

I have attached additional pictures to test the bid logic movements.

 

You can see the DEFINED GAP as MINGAP in Picture 2.

 

Thanks


Con risposta

1
Sviluppatore 1
Valutazioni
(9)
Progetti
19
16%
Arbitraggio
3
67% / 0%
In ritardo
0
Gratuito
2
Sviluppatore 2
Valutazioni
(77)
Progetti
240
73%
Arbitraggio
7
100% / 0%
In ritardo
1
0%
Gratuito
3
Sviluppatore 3
Valutazioni
(5)
Progetti
6
0%
Arbitraggio
3
0% / 100%
In ritardo
0
Gratuito
4
Sviluppatore 4
Valutazioni
(69)
Progetti
146
34%
Arbitraggio
13
8% / 62%
In ritardo
26
18%
Gratuito
Pubblicati: 6 codici
Ordini simili
Greetings, I'm seeking a price quote for the following EA description. 1) Short positions are opened after trades that have closed below the open of the trade. 2) Long positions are opened after trades that have closed above the open of the trade. 3) The base lot size plus the spread is applied for every trade that opens after the take profit has been reached. 4) Double the lot size of the previous trade plus
I have an issue with my ninja script and i would like you to help me straighten things I wanted to create an indicator and i have the source code already but i am getting compiling errors on my NinjaTrader And i tried fixing the error it still same I sent 3 images here for you to understand the errors and i would like to ask if you can help me fix it so i can go ahead and compile my source code. Thanks
Good day, I would like to build an automated trading system for Ninjatrader using 2 MACD, a Supertrend, and a moving average indicator. I want the option to adjust the indicator settings, the ability to trade at three different times, and the option to receive alerts. I want to get an idea of what that will cost me. It will enter trades on all blue take one contract out at a fixed point, move the stop to break even
I have an indicator i need automated i use it manually and it plots arrows. Can you automate it for my Ninjatrader8? Do you need to see file? Expert Ninjatrader Developer can Bid for this project
Project Overview We are seeking an experienced MetaTrader 5 (MT5) / MQL5 developer to design and build a production-ready Expert Advisor intended for live trading with capital at risk . This is not a hobby, experimental, or retail-grade EA. We are only interested in developers with proven experience delivering robust, well-tested MT5 systems . Project Objective Design and implement a high-quality MT5 Expert Advisor
I want developer who know how to create bot which immediately transfer specific crypto coin deposit to one crypto address to another specific address in just a second,, if you know about this then only comment on this post
Hey bro, can you help with NT8. On a vps, multiple algos and prop account but the strategies keep getting out of sync, going from true to false for no reason….. mid trade it pops errors.The algo codes are locked… other than that it’s open VPs, NT8 and strategy is open You will notice in the strategies xml that there are standard, then 100k and 50k versions…… Also I did version that are in strategy labeled "Apex"
Hello Developers, I need ready made MT5 HFT Gold Scalper. Must pass in backtesting lower DD work with minimum $50 if you have ready made scalper than send file for Demo test and than we Final the deal. Thanks
I would like to create an indicator for my strategy on trading view , my strategy involves a liquidity sweep , wick or candle body closure , this needs to happen inside a higher time frame pd array such as a fair value gap that’s atleast 5m + and there needs to be an inversion fair value gap for my entry , I want the fair value gaps on all time frames so I can see them all on the 1 minute chart but i want the fair
can you help me with making a simple tradingview/script that draws boxes labeling consolidation areas according to my specifications? IF anyone can help with this kindly do well to bid to this so we can discuss more about the project thanka

Informazioni sul progetto

Budget
30 - 50 USD