All orders
Rules
Watch how to order a trading robot
Read the Rules before you post an order or execute it
How to Order a Trading Robot in MQL5 and MQL4
See a sample Requirements Specification to order a robot
New orders in the category:
30+ USD
40 - 300 USD
Job finished
Execution time 3 days
Feedback from customer
File was not downloadable, did not respond neither.
Specification
I’m looking to have an EA robot (mt4/5) created
that has a numerous set of simple rules that aligns with my strategy.
I own a signal group and have all of my trades from the past 12 most mapped out
I’m very new to robots so don’t know how everything works, my strategy is VERY simple but VERY efficient giving i have a 85%+ Win Rate. Looking for my bot to do the same results if not better. 1. Trend-Following with Pending Orders
• Entry Condition:
• Only place pending orders when both the 1-hour and 4-hour timeframes confirm a trend using the EMA (Exponential Moving Average). A buy stop is placed if the 50 EMA is above the 200 EMA on both timeframes, and a sell stop is placed if the 50 EMA is below the 200 EMA.
• Additional Condition: RSI(14) must be above 55 for a buy setup and below 45 for a sell setup on the 1-hour chart. This ensures momentum aligns with the trend.
• Pending Order Placement:
• Calculate the placement of the buy or sell stop order based on the Average True Range (ATR). For instance, if ATR(14) is 20 pips, place the order 15 pips above the last swing high for a buy or 15 pips below the last swing low for a sell.
• Trend Break Confirmation:
• Define a “strong trend break” as the price breaking out with a single 1-hour candle that closes beyond the recent swing high (for buy) or low (for sell) by at least 1.2 times the ATR(14).
2. Fly Zones (Weak Support and Resistance)
• Fly Zone Definition:
• Fly Zones are areas where price frequently crosses support and resistance levels. Define Fly Zones based on historical data where price has crossed a level at least 5 times in the past 3 months within a 30-pip range.
• Entry within Fly Zones:
• Only enter a position within a Fly Zone if RSI(14) is between 40 and 60 (indicating a potential reversal or breakout zone) and MACD shows a convergence or divergence. For example, if RSI is low but MACD shows bullish divergence, consider a buy setup.
3. Risk Management with Multiple Take Profits
• Position Sizing:
• Use ATR to set position sizes and stop-loss distances. For example, in low-volatility conditions (low ATR), use a higher position size with tighter stop losses; in high volatility (high ATR), use a smaller position size with wider stop losses.
• Three Separate Take Profits:
• Divide each position into three parts:
• Take Profit 1 (60%): Set at a 1:1 risk-to-reward ratio, ensuring achievable profits.
• Take Profit 2 (20%): Set at a 1:3 risk-to-reward ratio to capture moderate trend movement.
• Take Profit 3 (20%): Set at a 1:6 or higher risk-to-reward ratio, targeting maximum trend movement.
• Stop Loss Adjustment:
• When Take Profit 1 is reached, move the stop loss for the remaining position to breakeven.
• When Take Profit 2 is reached, move the stop loss of the final position to the level of Take Profit 1, locking in profit.
4. Protecting Profits and Minimizing Losses
• Trailing Stop: Implement a trailing stop for the final portion (Take Profit 3) at 1.5 times ATR(14). This allows the bot to maximize gains if the price moves further in your favor.
• Breakeven Stop:
• For each entry, adjust the stop loss to the entry level if Take Profit 1 is achieved, to prevent losing a winning trade.
5. Technical Analysis and Market Context
• Trend Confirmation with Technical Indicators:
• Use trendlines, price action, and candlestick patterns (e.g., bullish/bearish engulfing) to support entry and exit decisions. For example, if a bullish engulfing pattern appears on the 4-hour chart at a Fly Zone, consider a buy setup if it aligns with EMA and RSI.
• Market News Filter:
• Incorporate an external filter to pause trading 15 minutes before and after high-impact news events, as reported on an economic calendar (e.g., FOMC announcements, NFP, etc.).
6. Multi-Timeframe Confirmation for Entry Optimization
• Trend Alignment Across Multiple Timeframes:
• Confirm that both the 1-hour and 4-hour charts align in trend direction. For example, for a buy entry, ensure the 50 EMA is above the 200 EMA on both charts.
• Indicator Validation in Fly Zones:
• Combine Fly Zones with RSI and MACD. For instance, only place a buy stop in a Fly Zone if RSI(14) is above 55 and MACD shows a bullish cross.
7. ATR-Adjusted Pending Order Placement
• Pending Order Distance Based on ATR:
• For all pending orders, set entry levels a certain percentage beyond recent highs or lows, adjusting according to ATR. For example, place the buy stop order 10 pips + (0.5 * ATR(14)) above the most recent high. This helps account for volatility and prevents premature entries.
8. Enhanced Risk Management with ATR-Adjusted Position Sizing
• Position Sizing with ATR:
• Calculate stop-loss distances and position sizes based on ATR, ensuring consistent risk. For example, in high-volatility markets (high ATR), use a wider stop loss but a smaller position size; in low-volatility markets (low ATR), use a tighter stop with a larger position size.
9. AI-Driven Sentiment Analysis Filter
• Sentiment Analysis:
• Use sentiment data from tools like StockTwits, Twitter API, or custom AI models to filter trades. Only enter trades if sentiment aligns with your signal; for example, if sentiment is over 60% bullish when considering a buy.
• Position Sizing Based on Sentiment:
• Adjust position sizes based on sentiment alignment. If sentiment strongly supports the trend, increase position size within your risk management limits. If sentiment is mixed, reduce or skip the trade.
10. Adaptive Take Profit and Stop Loss
• Dynamic Take Profits:
• Allow the bot to adjust Take Profit 3 dynamically based on current price action. For example, if price action is strong (e.g., closing high on consecutive bars), extend Take Profit 3 by an additional 1:1 risk-to-reward ratio.
11. Daily Loss Limit and Drawdown Control
• Daily Loss Limit:
• Program the bot to stop trading once a daily loss limit of 2% of account balance is reached. This prevents excessive losses and preserves capital.
• Drawdown Control:
• Implement a maximum drawdown limit (e.g., 10% of account balance) to stop trading and require manual reset if breached.
Summary of Key Indicators and Values:
1. 50 EMA and 200 EMA on 1-hour and 4-hour charts for trend direction.
2. RSI(14):
• Above 55 for buy entries, below 45 for sell entries.
3. MACD:
• Confirm trend or divergence, particularly within Fly Zones.
4. ATR(14):
• Calculate stop-loss distances, pending order placements, and adjust position sizing based on volatility.
Responded
1
Rating
Projects
8
0%
Arbitration
2
50%
/
0%
Overdue
1
13%
Working
2
Rating
Projects
91
13%
Arbitration
34
26%
/
59%
Overdue
37
41%
Free
3
Rating
Projects
1
0%
Arbitration
0
Overdue
0
Free
4
Rating
Projects
0
0%
Arbitration
0
Overdue
0
Free
5
Rating
Projects
553
50%
Arbitration
57
40%
/
37%
Overdue
227
41%
Working
6
Rating
Projects
7
0%
Arbitration
3
0%
/
100%
Overdue
2
29%
Free
7
Rating
Projects
1
0%
Arbitration
4
0%
/
50%
Overdue
0
Working
Similar orders
Title: Simple background trading bot for my Oanda account (v20 REST API) Overview Hi, I need a simple, lightweight event based standalone trading bot that connects directly to my Oanda account using broker’s standard REST API (V20 account) via VPS The bot just needs to look at group of 5 currency pairs (manually selectable and adjustable) in different 4 baskets, do some basic percentage math every period, and place
Gold hunter v5
30+ USD
*TITLE:* 5 Trades EA - EMA20/50 + RSI - Safe for Small Account *SPECIFICATION:* I need MT5 EA - Source Code .mq5 *Logic:* Buy: EMA20 > EMA50 and RSI(14) 45-70 Sell: EMA20 < EMA50 and RSI(14) 30-55 Timeframe M15, Symbol XAUUSD and all Forex *Trade Management:* Max 5 trades at same time. Fixed lot 0.01. No martingale. No lot increase. Distance between trades 150 points. Do not open all 5 at same price. Max 5 total
Tradingview strategy develop
30+ USD
i need some tradingview strategy that i want to use as a tester, i have something that i am working on currently and i need someone that can provide me with tradingview strategies that doesn't have a win rate, the one with 1:1 RR it need to have low win rate like 10% or 5% profitability, i am not paying $30 for,i dont have up to that for this cause i only want to use it as a test, if anyone have any to send me please
An expert trading bot
250 - 350 USD
I have a working MetaTrader 5 Expert Advisor already coded and running -- this is not a "build from scratch" job. The EA trades a smart-money-concepts style model (structure breaks, liquidity sweeps, order blocks, fair value gaps, optimal trade entry retracement). Exact parameters and the rest of the underlying logic are proprietary and will only be shared once we're under a working agreement. To check you actually
I have 2 trading view indicators by GainzAlgo that I want code to mt5 , could u advise? I need you to give me response if you can convert This
I am looking to acquire an EXISTING and PROVEN MetaTrader 5 Expert Advisor. I am NOT looking for someone to develop a random new strategy from scratch. The objective is to find a robust EA with an existing track record, verify its performance and robustness, and purchase the MQL5 source code together with clearly defined commercial rights. MAIN REQUIREMENTS The EA should meet most or all of the following
Project Description I am looking for an experienced MQL5/MT5 Expert Advisor developer to develop an automated trading EA for XAUUSD on the M3 timeframe , running on an Exness account . The EA will automate a manual strategy based on SNR/GAP zones , using two setup types: Price Rejection Price Correction The EA should identify valid BUY/SELL setups around predefined SNR/GAP areas, apply configurable RSI, SMA, EMA and
SIERRA CHART PROJECT
64+ USD
Looking for an experienced Sierra Chart ACSIL/C++ developer to customize footprint chart. I need 3 things: 7-Day ATR – calculate and display a configurable 7-day ATR. Custom Footprint – footprint chart to match my preferred layout/data display. Automatic LVN – detect and plot Low Volume Nodes automatically based on volume distribution. I need to build one from scratch . Experience with Sierra Chart, ACSIL
Looking for an experienced Sierra Chart ACSIL/C++ developer to customize an existing footprint chart. I need 3 things: 7-Day ATR – calculate and display a configurable 7-day ATR. Custom Footprint – modify my existing footprint chart to match my preferred layout/data display. Automatic LVN – detect and plot Low Volume Nodes automatically based on volume distribution. I already have a working footprint chart, so no
V3 PRO Auto-Scalper EA
40+ USD
//———————————————————————————————————————————————————————————————————— struct S_MCAV { double matureSum; double totalSum; double value; void Init () { matureSum = 0.0; totalSum = 0.0; value = 0.5; } void AddContext (int ctx) { totalSum += 1.0; if (ctx == 1) matureSum += 1.0; } void ApplyDecay (double rate) { matureSum *= rate; totalSum *= rate; } void Update () {
Project information
Budget
50+ USD
Deadline
to 15 day(s)