Tüm siparişler
Kurallar
Bir alım-satım robotunun nasıl sipariş edileceğini izleyin
Bir sipariş vermeden veya bir siparişe başvurmadan önce Kuralları okuyun
Bir MQL5/MQL4 Alım-Satım Robotu Nasıl Sipariş Edilir?
Bir robot sipariş etmek için örnek Gereklilikler Şartnamesine bakın
Kategorideki yeni siparişler:
30 - 20000 USD
30 - 100 USD
50+ USD
50 - 100 USD
30 - 50 USD
İş tamamlandı
Tamamlanma süresi: 19 gün
Müşteri tarafından geri bildirim
Igor is smart, and software is his thing. He spent days and hours in this business. Even at 3, 4, 5 o'clock at night. Patience may be the right word to describe itself. Thanks.
Geliştirici tarafından geri bildirim
Thanks for task, it was interesting! Wish you all the best!
Şartname
Hello Everyone,
I want to make additional additions to the EA I use in my current hand. If it is possible.
Main plugins i want: An add-on to TrailingStop and take profit in case of multi-robot (EA) usage. And minor fixes.
The explanations may be long, to be more descriptive, but I am definitely not talking about a complicated plugin.
Avaliable features - Exists:
--------------------------------
* When the number of positions increases, the following is also increased: step between positions, lot size, take profit (martingale)
With the increase in the number of positions:
the step between positions is increased;
the distance of take profit is increased.
If a signal emerges and the number of positions is equal to the limit, one more position is opened and at the next bar (if there is a signal to open a position)
the most losing position is closed.
Protection of profit: if protection is allowed and the total profit of all positions is greater than the specified value,
as well as the number of positions is greater than or equal to the protected amount, the most profitable position is closed.
For example, we have a total profit of $52 and four open positions. The protected amount is set to "3". So we can close one position,
thus trying to keep a minimum of three positions always open.
This EA's current Input Parameters; (Exists)
** Lots (if <= "0" -> "Risk" is used) - position volume (if <= "0.0", lot "Risk" parameter will be calculated audibly); >>>>Available and used.
** Stop Loss (in pips) - Stop Loss value; >>>>Available and used.
** Take Profit (in pips) - Take profit value; >>>>Available and used.
** Trailing Stop (in pips) - trailing value; >>>>Available and used.
** Trailing Step (min value == 1) (in pip) - trailing step value; >>>>Available and used.
** Percentage risk for a free margin deal - risk per trade as a percentage of free margin; >>>>Available and used.
** Maximum open quotes - the maximum number of open positions (eg = 5) as well as the maximum one-way open position limitation (eg = 3) (Buy or Sell); >>>>Available and used.
** Interval between positions - the distance between positions; (must be in bars.) >>> >>>>Available and used. (it is not working right now.)
** Coefficient interval between positions - multiplier for the step between positions; >>>>Available and used.
** Coefficient Take profit - multiplier for the Take Profit step; >>>>Available and used.
** Min profit. Close max profit position - minimum profit, at which the most profitable position will be closed; >>>>Available and used.
** Account protection. If "true" -> closes max profit position - maintains profit at which the most profitable position will be closed; >>>>Available and used.
** If "account protection" = "true" then number of items open - number of locations to protect; >>>>Available and used.
** Reverse case - reversal signals; >>>>Available and used. (You can remove this part. I don't need Reverse Signal.)
** Max volume of position - maximum allowed position volume; >>>>Available and used.
** Lot coefficient - lot multiplier, the more open positions exist, the greater lot multiplier will be. >>>>Available and used.
** BenefitK. I have added it. (Maybe in need of some regulation) >>>>Available and used.
These are Okay.
----------------------------------------------------------------------------------------------------------------------
The Original EA is here: >>> https://www.mql5.com/en/code/19598. ( I transformed from this orginal EA )
I changed the ZeroLag indicator and just added the MACD Average Signal Line instead.
The indicator i used here: >>> https://www.mql5.com/en/code/20242
----------------------------------------------------------------------------------------------------------------------
In addition i want;
----------------------------------------------------------------------------------------------------------------------
1-)
The current Classic Trailing Stop and Follow-Up Step is ok. With the additional add-on I want,
after the position is taken to the ground and the classic Trailing Stop is activated,
the following Stop will approach the price as much as the value determined by the input, as well as the value of xx bars (eg = 7 bars).
Let's call this additional plugin BarStep.
Let's call the Bar number to wait after Trailing Stop is activated, Bar
Stop. In this example;
Stop. In this example;
BarStop = 7 Bars
BarStep = 15 points
If I will explain over the sample values here. After Trailing Stop is activated, 7 bars will be expected, nothing will happen.
Meanwhile, only normal Trailing Stop and Trailing Step will be active and will work normally.
After 7 bars, the Trailing Stop level will approach the price by 15 point s at each new bar. (eg BarStep = 15 point s)
The logic here after waiting for a certain period of time (time = bar) and the next stop gets smaller depending on the time (time = bar) and gets smaller with each bar.
Also, keep TralinStep active with the addition of this plugin. Let it run normally.
Both the following step and the Confirmation Step depend on the checkmark. It would be great if that way was possible.
With the Srtategy tester I can optimize and update the values here.
Let's add True - False to this addition. If it doesn't give very good results, let it be disabled. Or if Int BarStep = 0 it means false.
However, in this case, standard Trailing Stop, Trailing step will be active.
Illustrative example:
--------------------
Current price (Example: after 7 bars) = 1.20350 >>> Profit = 350 point s, Guaranteed Profit = 50. (because it is in 50 interval >> 330 - 380 between)
Trailing Stop: 280 pips (1,20050)
Trailing Step: 50
The parameter I want is a new property and name it BarStep = 15 (for example)
Let's assume the price is fixed: 1.20350
8th Bar>> Trailing Stop: 280-15 = 265 points (1,20065) (15 point s slipped up)
9th Bar >> Trailing Stop: 245-15 = 210 pips (1.20080) (15 point s slipped up)
10.Bar>> Trailing Stop: 210-15 = 175 pips (1.20095) (15 point s slipped up)
15. Bar>> Trailing Stop: 175 -15 * 5 = 0 pips (1.20170) (75 point s slipped up)
2-) If this newly modified EA is used at the same time, for example 2 different symbols and 4 different time parameters;
Feature of Multicurrency.
For example: EURUSD 1H, EURUSD 30M, USDCAD 2H and USDCAD 15M (I usually work on 5-digit symbols.)
If the profit of the total calculation for all robots (EA) reaches the level of all = 1000 point s (xxx point s),
then the most profitable xx position (i.e. = 3) and the most losing position (e.g. = 2) I want it to be closed.
It should have the option True-False or it can also mean false (if the value = 0). // --- You can add a comment. It does not matter.
I do not know if 1000 point s are correct logic here. I don't know if point s can be collected in different symbols.
Perhaps instead of fulfilling the requirement to reach 1000 point , a condition of reaching a specified percentage of the Eqquity or balance can also be created.
This part depends on the software developer's decision. (Let me repeat that I usually work on 5-digit symbols.) I didn't know which one would be correct.
Of course a robot takes care of its own trades, usually opening its own trades, closing its own trades. An additional feature I mentioned.
In other words, this new EA I want will be able to intervene in the positions of other robots, regardless of MagicNumber and ticketNumber, when a special requirement is met.
In order for this feature to be added, in addition to 1 special magic number for each new position, the second universal can have an identical magic number!
I think it can be solved this way.
3-) I mentioned above. In addition to the open position limitation as well as the maximum one-way open position limitation (eg = 3) (Buy or Sell)
Total position two way can be xx ( eg = 5 ) but one way positions must be xx ( eg = 3 )
4-) If the profit of open positions reaches the limit of > 0 and for example 600 point s (xxx point ),
I want the feature to then the most profitable xx position (i.e. = 2) and the most losing position (e.g. = 1) I want it to be closed.
for this 1 EA's 1 symbol's magicNumber and this EA robot. And must be True-False options or if value equals = o it is false. (// --- You can add a comment.)
There is this part, but it actually means that the existing benefitK is modified with the eyes of the programmer.
5-) There is an active feature currently in use; (it is some similar to item 4)
"If a signal emerges and the number of positions is equal to the limit, one more position is opened and at the next bar (if there is a signal to open a position)
the most losing position is closed."
I want to change this feature like that;
If a signal emerges and the number of positions is equal to the one-way limit, one more position is opened and at the next bar (if there is a signal to open a position)
the most losing position is closed and with this most benefit position is closed if any.
This the most losing position is closed. ok. But most benefit position is closed if any. Let's add true - Fals to this section, please.
6-) Slippage value is true i dont know! How much must it be? i cant know abut it.
And digit problem; Actually it is seem normal. But there are a problem. i fixed it some like just as follows.
// --- tuning for 3 or 5 digits
int digits_adjust = 1;
if (m_symbol.Digits () == 3 || m_symbol.Digits () == 5)
digits_adjust = 1; <<<<<<(( Originally this number is 10. EURUSD doesn't work properly if you don't set it to == 1 ))
m_adjusted_point = m_symbol.Point () * digits_adjust;
ExtStopLoss = InpStopLoss * m_adjusted_point;
ExtTakeProfit = InpTakeProfit * m_adjusted_point;
ExtTrailingStop = InpTrailingStop * m_adjusted_point;
ExtTrailingStep = InpTrailingStep * m_adjusted_point;
ExtIntervalPositions = InpIntervalPositions * m_adjusted_point * 10; <<< ((EURUSD doesn't work properly if you don't set == 10 here. İf here 10 everything is ok.))
Can you fix this part please. Because it is not working right.
SL TP lots etc. must work truely in 5 digit symbols. At the same time on 3 digits.
7-) And it constantly opens selling positions. I did not understand the reason for this either. I changed the conditions.
Again, the situation has not changed. I wrote the simple conditions again. The same EA: 174 sell, 14 buy !!! (15M, 10M, 5M) in 15 days.
I don't see anything strange when I examine it. I have examined the Buy-Sell conditions again, it seems like there is no mistake!
Moreover, everything is normal in the strategy test.
I would be glad if you can also look at this topic.
----------------------------------------------------------------------------------------------------------------
You Please submit the final and edited version of the EA file with its open codes, after testing and checking.
Of course, I'll have to retest on the demo account later.
Thank you, and good luck with.
Yanıtlandı
1
Derecelendirme
Projeler
48
21%
Arabuluculuk
6
83%
/
17%
Süresi dolmuş
8
17%
Serbest
2
Derecelendirme
Projeler
200
12%
Arabuluculuk
39
38%
/
33%
Süresi dolmuş
5
3%
Serbest
Yayınlandı: 2 kod
3
Derecelendirme
Projeler
267
30%
Arabuluculuk
0
Süresi dolmuş
3
1%
Çalışıyor
Yayınlandı: 2 kod
4
Derecelendirme
Projeler
19
11%
Arabuluculuk
1
0%
/
100%
Süresi dolmuş
5
26%
Serbest
5
Derecelendirme
Projeler
15
33%
Arabuluculuk
4
0%
/
25%
Süresi dolmuş
3
20%
Serbest
6
Derecelendirme
Projeler
91
13%
Arabuluculuk
34
26%
/
59%
Süresi dolmuş
37
41%
Serbest
7
Derecelendirme
Projeler
263
22%
Arabuluculuk
23
52%
/
17%
Süresi dolmuş
0
Yüklendi
Benzer siparişler
I am looking to convert my existing TradingView Pine Script (v5) strategy into an MQL5 Expert Advisor (EA) for MetaTrader 5. Strategy Details: Asset: Gold (XAUUSD) Timeframe: 15-minute Strategy Logic: The strategy is based on a breakout concept. Anchor Candle: The base calculation starts from the Specified Candle Entry Window: The EA should only look for entries As Per Indicator Risk Management: The strategy
Project Overview I am seeking an experienced MQL5 Expert Advisor (EA) developer to automate a systematic, multi-timeframe institutional trading framework specifically optimized for Spot Gold (XAUUSD) . The EA must programmatically map market structure, identify liquidity zones, and execute trades based on structural confirmations across three distinct timeframes: Daily (D1), 1-Hour (H1), and 15-Minute (M15) . Core
Writing of an Expert Advisor
30 - 200 USD
I want to find a Developer to perform this work and settle payments in this Application. I undertake not to communicate with Applicants anywhere else except this Application, including third-party messengers, personal correspondence or emails. I understand that violators will be banned from publishing Orders in the Freelance
Akram boushaba
30 - 500 USD
مرحبا كيف حالكم انا اكرم مهتم بالتداول احاول ان اصمم برنامج روبوت قادر على التداول من تلقاء نفسه من يمكنه ان يساعدني او يعلمني كيف استطيع فهل ذلك وسأكون ممتناً له وشكرا لكم
MetaTrader In-App Trade Alerts An existing MetaTrader terminal is already running on my side, but its account is kept hidden for privacy reasons. I need a specialist to wire up native in-app notifications so that every time a position is opened or later closed I see an immediate pop-up inside the platform—no emails or SMS, just the built-in alert window (and the usual MT push to mobile if that comes automatically
Develop a custom indicator that uses RSI divergence, that gives a sell signal when a particular level is broken in a "M" in which the last trending candle of both level must not have 5EMA touch at all wether on the wick or body, the second level is formed when there is a bearish signal candle
Modify existing MT5 XAUUSD EA entry and exit logic
150 - 200 USD
I have an existing MT5 Expert Advisor for XAUUSD M5. This is NOT a new robot from zero. I need modification and professional review of an existing MQL5 EA. Main goals: 1. Buy entries: Buy trades are currently too rare. The Buy ADX filter was very strict at 45. I am testing 40 now. I need you to review the Buy entry filters and improve Buy entry quality without making entries random or weak. 2. Sell entries: Sell
I have a non-repainting MT4 indicator called Trend Pullback 3 . I am looking for an experienced MQL4 developer with a strong understanding of both programming and technical analysis to improve the indicator's signal quality. Project Goal The objective is to reduce or eliminate signals that occur during sideways, low-probability, choppy market conditions while preserving the high-quality signals that occur during
[7/6/2026 12:24 PM] DR.HassaN: Current Phase: Comprehensive Review & Final Enhancement_ This indicator is designed for the TradingView platform. Now that the core engines have been completed, I want to enter a comprehensive review and professional enhancement phase before adding any major new features. My goal is to transform this indicator into a premium institutional-grade TradingView indicator , both in terms of
Hello friends, I have an mq4 indicator file for binary options that I want to develop to give better results than the current one. I'm looking for a professional developer who can do this. I will provide you with the file, along with results from another indicator (which I want to develop my indicator to resemble) so you can compare them. If you can do this work, please contact me
Proje bilgisi
Bütçe
100 - 200 USD
Son teslim tarihi
to 7 gün