Ichimoku Tenkan Kijun Cross Scanner All Pair TF
- Indicadores
- Versão: 1.0
- Ativações: 5
Ichimoku Tenkan Kijun Cross Scanner All Pair TimeFrame
Overview
TK Cross Scanner Dashboard is a technical analysis indicator and multi-asset market scanner engineered for the MetaTrader 4 platform. The utility monitors multiple currency pairs, commodities, and timeframes simultaneously to detect Ichimoku Tenkan-sen and Kijun-sen crossovers (TK Cross). In addition to automated signal scanning, the software calculates dynamic Stop Loss (SL) and dual Take Profit (TP1 and TP2) reference levels using the Average True Range (ATR) and integrates a modular 15-filter validation suite to help traders evaluate market conditions from a single interactive chart panel. Because this product is a visual analytical scanner and indicator rather than an automated trading robot, it does not open, modify, or close live orders on the user's behalf; instead, it provides structured technical data, price projections, and multi-channel notifications to support discretionary decision-making.
Operating Principle
- Primary Signal Detection: The core engine calculates the Ichimoku Tenkan-sen (conversion line, derived from the midpoint of the highest high and lowest low over the Tenkan period) and Kijun-sen (base line, derived from the midpoint of the highest high and lowest low over the Kijun period) across configured symbols and timeframes. A bullish signal is registered when Tenkan-sen crosses above Kijun-sen, while a bearish signal is registered when Tenkan-sen crosses below Kijun-sen within the specified lookback window.
- Closed-Bar Confirmation & Non-Repainting Behavior: Signal evaluation starts from index 1 (the most recently closed candle) and scans backward up to the defined lookback limit. Because calculations rely strictly on completed historical bars rather than the active forming bar (index 0), confirmed signals do not repaint, recalculate, or shift position after candle closure.
- Risk-Reward Level Projection: Upon detecting a valid crossover on a closed bar, the indicator reads the ATR value at that exact signal candle to establish a volatility-adjusted Stop Loss distance. Two Take Profit levels (TP1 and TP2) are then projected proportionally from the signal candle closing price based on user-defined Risk-to-Reward multipliers.
- Multi-Filter Confirmation Pipeline: Before a crossover is displayed on the dashboard or triggers an alert, it passes through an optional validation pipeline containing 15 independent technical filter modules. Each enabled module evaluates the market state on the exact signal bar index; only signals satisfying all active filter criteria concurrently are marked as valid.
Key Features
- Multi-Pair and Multi-Timeframe Matrix: Scans up to the configured maximum number of symbols from either a custom comma-separated list or the active Market Watch window across multiple timeframes concurrently during each timer cycle.
- Interactive On-Chart Dashboard: Displays a real-time sortable table showing Pair, Timeframe, Signal Direction (BUY/SELL), Signal Timestamp, Entry Price, Stop Loss, TP1, TP2, Bar Offset, and Signal Age.
- One-Click Chart Switching & Visual Projection: Clicking the OPEN button on any active signal row switches the current chart to the corresponding symbol and timeframe, sets the chart display to candlesticks, and plots directional arrows alongside horizontal reference lines for Entry, SL, TP1, and TP2.
- Draggable & Collapsible Interface: Includes header drag-and-drop positioning, a minimize/maximize toggle (MIN/MAX), a manual REFRESH trigger, and a CLEAR button, with panel coordinates and collapse state saved automatically via terminal global variables.
- Modular 15-Filter Validation Suite: Provides optional confluence filtering using RSI Cross, ADX Trend Strength, Single Moving Average, Ichimoku Senkou Span B, RSI 75 Trend Bias, Double Moving Average Alignment, Awesome Oscillator, Parabolic SAR, Heiken Ashi Candle Polarity, CCI Trend, CCI Overbought/Oversold, RVI Trend/Signal, MACD Histogram/Zero Line, Support/Resistance Zones, Fibonacci Retracement, and ATR Supertrend.
- Multi-Channel Alert System: Supports MetaTrader pop-up alerts, customizable WAV sound alerts for buy and sell signals, mobile push notifications via MetaQuotes ID, and SMTP email notifications, with duplicate-alert suppression per symbol-timeframe slot.
Operation & Setup Recommendations
- Recommended Instruments: Compatible with major and minor Forex pairs (such as EURUSD, GBPUSD, USDJPY, AUDUSD, USDCAD, USDCHF, NZDUSD, EURJPY, GBPJPY) as well as metals like XAUUSD. It can be applied to any liquid instrument available in Market Watch; users should verify broker-specific symbol prefixes or suffixes and spread characteristics before scanning.
- Supported Timeframes: Supports all standard MetaTrader 4 timeframes (M1, M5, M15, M30, H1, H4, D1, W1, MN1). The default configuration targets intraday and swing analysis across M5, M15, M30, H1, and H4.
- Account & Execution Environment: Works on standard, ECN, and raw-spread accounts (both Hedging and Netting). Before running multi-pair scans, ensure historical chart data is downloaded and synchronized in MetaTrader 4 for all target symbols and timeframes so the scanner can compute indicator values without missing bars.
- Resource & CPU Optimization: Scanning numerous pairs across low timeframes consumes terminal memory and CPU cycles. Adjust InpMaxSymbols, InpBarsCopy, and InpScanSec according to your computer hardware specifications, and avoid running multiple heavy multi-symbol dashboard instances simultaneously on the same terminal.
GUI & Visual Elements Guide
- Dashboard Columns: PAIR (instrument symbol name), TF (scanned timeframe label), DIR (signal direction, displaying BUY in green or SELL in red), TIME (broker server timestamp of the signal candle), ENTRY (closing price of the signal bar), SL (ATR-based stop reference level), TP 1 (first reward target level), TP 2 (second reward target level), BAR (number of closed bars elapsed since the crossover occurred), AGE (elapsed time in seconds, minutes, hours, or days since signal generation), and OPEN (interactive button to load the signal chart).
- Header Controls & Sorting: REFRESH forces an immediate reload of symbols/timeframes, re-initializes filter instances, and runs a fresh scan; CLEAR removes dashboard graphical objects from the chart; MIN/MAX collapses the table into a compact status bar or expands it back to full view; clicking PAIR, TF, DIR, or TIME column headers toggles ascending or descending sorting (indicated by ^ or v).
- Hover Tooltips & On-Chart Objects: Hovering the cursor over any active table row displays a detailed tooltip containing symbol, timeframe, direction, timestamp, Entry, SL, TP1, TP2, and exact Tenkan-sen/Kijun-sen values. When a chart matches an active signal, an upward or downward arrow marks the crossover candle, accompanied by dotted/dashed reference lines labeled with exact Entry, SL, TP1, and TP2 prices.
Input Parameters Documentation
Entry Logic & Core Settings
- InpSepEntry (Default: "=== [ENTRY LOGIC] TK CROSS CORE ===") -> Visual section separator header in the MetaTrader Inputs tab for core crossover settings.
- InpTenkan (Default: 9) -> Lookback period in bars used to calculate the Ichimoku Tenkan-sen (conversion line).
- InpKijun (Default: 26) -> Lookback period in bars used to calculate the Ichimoku Kijun-sen (base line).
- InpDirection (Default: 0) -> Directional scan mode filter: 0 scans both BUY and SELL crossovers, 1 scans BUY signals only, 2 scans SELL signals only.
- InpLookback (Default: 50) -> Maximum number of closed bars searched backward from bar 1 to locate the most recent TK crossover.
Risk Reward & ATR Settings
- InpSepRR (Default: "=== [RISK REWARD] ATR SL & TP ===") -> Visual section separator header in the MetaTrader Inputs tab for ATR risk-reward settings.
- InpATRPeriod (Default: 14) -> Lookback period in bars for calculating the Average True Range (ATR) volatility indicator.
- InpATRMultSL (Default: 1.5) -> Multiplier applied to the ATR value at the signal bar to determine Stop Loss distance in price points.
- InpTP1_RR (Default: 1.0) -> Risk-to-Reward ratio multiplier applied to the Stop Loss distance for calculating the first Take Profit level (TP1).
- InpTP2_RR (Default: 2.0) -> Risk-to-Reward ratio multiplier applied to the Stop Loss distance for calculating the second Take Profit level (TP2).
Scanner Scan Configuration
- InpSepScan (Default: "=== SCANNER SCAN CONFIG ===") -> Visual section separator header in the MetaTrader Inputs tab for multi-pair scan configuration.
- InpSymbols (Default: "EURUSD,GBPUSD,USDJPY,AUDUSD,USDCAD,USDCHF,NZDUSD,EURJPY,GBPJPY,XAUUSD") -> Comma-separated list of instrument symbols to scan when Market Watch mode is disabled.
- InpTimeframes (Default: "M5,M15,M30,H1,H4") -> Comma-separated list of timeframes scanned for each configured symbol.
- InpUseWatch (Default: true) -> When true, automatically loads symbols from the active Market Watch window instead of the manual InpSymbols list.
- InpMaxSymbols (Default: 10) -> Maximum cap on the total number of symbols processed during each scan cycle.
- InpScanSec (Default: 7) -> Timer interval in seconds between automatic multi-pair and multi-timeframe scan cycles (minimum enforced at 3 seconds).
- InpBarsCopy (Default: 120) -> Number of historical bars copied per symbol and timeframe for crossover and filter calculations.
Filter Settings (15-Filter Validation Suite)
- InpFilter1 (Default: "=== 1. RSI CROSS FILTER ===") -> Visual section separator header for the RSI Cross filter group.
- Use_RSI_Cross_Filter (Default: false) -> Enables or disables the RSI oversold/overbought threshold crossover filter.
- RSI_Length (Default: 14) -> Calculation period in bars for the RSI Cross filter.
- RSI_Price_Source (Default: PRICE_CLOSE) -> Applied price type (such as Close, Open, High, Low, Median) used in RSI calculations.
- RSI_Oversold (Default: 30.0) -> Lower RSI level that the indicator must cross above from the prior bar to confirm a BUY signal.
- RSI_Overbought (Default: 70.0) -> Upper RSI level that the indicator must cross below from the prior bar to confirm a SELL signal.
- InpFilter2 (Default: "=== 2. ADX FILTER ===") -> Visual section separator header for the ADX trend strength filter group.
- Use_ADX_Filter (Default: false) -> Enables or disables the ADX minimum trend strength filter.
- ADX_Period (Default: 10) -> Calculation period in bars for the Average Directional Index (ADX) indicator.
- ADX_Min_Level (Default: 20.0) -> Minimum ADX main line value required on the signal bar to validate a trade setup.
- InpFilter3 (Default: "=== 3. SINGLE MA FILTER ===") -> Visual section separator header for the Single Moving Average filter group.
- Use_MA_Filter (Default: false) -> Enables or disables price position filtering relative to a single Moving Average.
- MA_Period (Default: 50) -> Lookback period in bars for the Single Moving Average filter.
- MA_Method (Default: MODE_SMA) -> Smoothing method (MODE_SMA, MODE_EMA, MODE_SMMA, MODE_LWMA) for the Single MA filter.
- MA_Shift (Default: 0) -> Horizontal bar shift applied to the Single MA calculation.
- InpFilter4 (Default: "=== 4. ICHIMOKU SENKOU SPAN B FILTER ===") -> Visual section separator header for the Ichimoku Senkou Span B filter group.
- Use_Ichimoku_Filter (Default: false) -> Enables or disables closing price filtering relative to the Ichimoku Senkou Span B cloud boundary.
- Ichimoku_Tenkan (Default: 9) -> Tenkan-sen period in bars used within the Ichimoku Senkou Span B filter module.
- Ichimoku_Kijun (Default: 26) -> Kijun-sen period in bars used within the Ichimoku Senkou Span B filter module.
- Ichimoku_SenkouB (Default: 52) -> Senkou Span B period in bars used within the Ichimoku filter module.
- InpFilter5 (Default: "=== 5. RSI 75 FILTER ===") -> Visual section separator header for the long-period RSI trend bias filter group.
- Use_RSI75_Filter (Default: false) -> Enables or disables the long-period RSI 50-level midline trend bias filter.
- RSI_Filter_Period (Default: 75) -> Calculation period in bars for the RSI midline trend bias filter.
- InpFilter6 (Default: "=== 6. DOUBLE MA FILTER ===") -> Visual section separator header for the Double Moving Average alignment filter group.
- Use_DoubleMA_Filter (Default: false) -> Enables or disables trend alignment filtering between two Moving Averages (MA A vs MA B).
- MA_A_Period (Default: 30) -> Lookback period in bars for the fast Moving Average (MA A).
- MA_A_Method (Default: MODE_EMA) -> Smoothing method applied to MA A.
- MA_A_Applied (Default: PRICE_CLOSE) -> Applied price source used to calculate MA A.
- MA_A_Shift (Default: 0) -> Horizontal bar shift applied to MA A.
- MA_B_Period (Default: 140) -> Lookback period in bars for the slow Moving Average (MA B).
- MA_B_Method (Default: MODE_EMA) -> Smoothing method applied to MA B.
- MA_B_Applied (Default: PRICE_CLOSE) -> Applied price source used to calculate MA B.
- MA_B_Shift (Default: 0) -> Horizontal bar shift applied to MA B.
- InpFilter7 (Default: "=== 7. AWESOME OSCILLATOR FILTER ===") -> Visual section separator header for the Awesome Oscillator filter group.
- Use_AO_Filter (Default: false) -> Enables or disables the Awesome Oscillator (AO) momentum validation module.
- Use_AO_Volume_Filter (Default: false) -> Requires AO histogram value to exceed configured positive or negative amplitude thresholds.
- AO_Buy_Min (Default: 4.0) -> Minimum positive AO threshold value required for BUY confirmation when volume filter is active.
- AO_Sell_Max (Default: -4.0) -> Maximum negative AO threshold value required for SELL confirmation when volume filter is active.
- Use_AO_Color_Filter (Default: false) -> Requires AO histogram bar value to rise compared to the prior bar for BUY, or fall for SELL.
- Use_AO_Zero_Filter (Default: false) -> Requires AO to be above zero and rising for BUY, or below zero and falling for SELL.
- InpFilter8 (Default: "=== 8. PARABOLIC SAR FILTER ===") -> Visual section separator header for the Parabolic SAR filter group.
- Use_SAR_Filter (Default: false) -> Enables or disables Parabolic SAR directional stop-and-reverse trend filtering.
- SAR_Step (Default: 0.02) -> Acceleration step increment parameter for Parabolic SAR calculation.
- SAR_Maximum (Default: 0.2) -> Maximum acceleration factor cap for Parabolic SAR calculation.
- InpFilter9 (Default: "=== 9. HEIKEN ASHI FILTER ===") -> Visual section separator header for the Heiken Ashi candle polarity filter group.
- Use_HeikenAshi_Filter (Default: false) -> Enables or disables Heiken Ashi synthetic candle polarity confirmation (bullish close above open for BUY, bearish close below open for SELL).
- InpFilter10 (Default: "=== 10. CCI TREND FILTER ===") -> Visual section separator header for the CCI zero-line trend filter group.
- Use_CCI_Filter (Default: false) -> Enables or disables Commodity Channel Index (CCI) zero-line directional trend filtering.
- CCI_Period (Default: 50) -> Calculation period in bars for the CCI zero-line trend filter.
- CCI_Applied (Default: PRICE_CLOSE) -> Applied price source used in the CCI trend filter.
- InpFilter11 (Default: "=== 11. CCI OB & OS FILTER ===") -> Visual section separator header for the CCI overbought/oversold momentum filter group.
- Use_CCI_OBOS_Filter (Default: false) -> Enables or disables CCI momentum breakout validation beyond overbought/oversold levels.
- CCI_OBOS_Period (Default: 14) -> Calculation period in bars for the CCI OB/OS filter.
- CCI_OBOS_Applied (Default: PRICE_CLOSE) -> Applied price source used in the CCI OB/OS filter.
- CCI_Overbought (Default: 100.0) -> Upper CCI threshold level required for BUY momentum confirmation.
- CCI_Oversold (Default: -100.0) -> Lower CCI threshold level required for SELL momentum confirmation.
- InpFilter12 (Default: "=== 12. RVI FILTERS ===") -> Visual section separator header for the Relative Vigor Index filter group.
- Use_RVI_Filter (Default: false) -> Enables or disables Relative Vigor Index (RVI) zero-line directional bias filtering.
- RVI_Period (Default: 75) -> Calculation period in bars for the RVI zero-line filter.
- Use_RVI_Signal_Filter (Default: false) -> Enables or disables RVI main line versus signal line relative position filtering.
- RVI_Signal_Period (Default: 20) -> Calculation period in bars for the RVI signal line crossover filter.
- InpFilter13 (Default: "=== 13. MACD FILTERS ===") -> Visual section separator header for the MACD histogram and zero-line filter group.
- Use_MACD_Filter (Default: false) -> Enables or disables MACD histogram polarity filtering (MACD main line minus signal line).
- MACD_FastEMA (Default: 12) -> Fast EMA period in bars for MACD calculation.
- MACD_SlowEMA (Default: 26) -> Slow EMA period in bars for MACD calculation.
- MACD_SignalSMA (Default: 9) -> Signal SMA period in bars for MACD calculation.
- MACD_Applied (Default: PRICE_CLOSE) -> Applied price source used for MACD calculation.
- Use_MACD_Zero_Filter (Default: false) -> Enables or disables MACD main line position filtering relative to the zero line.
- InpFilter14 (Default: "=== 14. SR & FIBONACCI FILTERS ===") -> Visual section separator header for Support/Resistance and Fibonacci filters.
- Use_SR_Filter (Default: false) -> Enables or disables proximity filtering near recent local Support and Resistance swing levels.
- SR_Period (Default: 50) -> Lookback period in bars used to identify recent Support lows and Resistance highs.
- SR_Zone_Points (Default: 80) -> Tolerance zone width in broker points around detected Support and Resistance levels.
- Use_Fib_Filter (Default: false) -> Enables or disables price zone validation between two Fibonacci retracement ratios.
- Fib_Level_1 (Default: 0.382) -> First Fibonacci retracement ratio boundary defining the validation zone.
- Fib_Level_2 (Default: 0.618) -> Second Fibonacci retracement ratio boundary defining the validation zone.
- ZigZag_Depth (Default: 12) -> Lookback depth in bars used to detect swing highs and lows for Fibonacci anchoring.
- ZigZag_Deviation (Default: 5) -> Minimum price deviation in points required to validate distinct swing points.
- ZigZag_Backstep (Default: 3) -> Minimum bar separation required between consecutive swing highs or swing lows.
- InpFilter15 (Default: "=== 15. SUPERTREND FILTER ===") -> Visual section separator header for the ATR-based Supertrend filter group.
- Use_Supertrend_Filter (Default: false) -> Enables or disables ATR-based Supertrend directional trend filtering.
- ST_AtrPeriod (Default: 10) -> ATR smoothing period in bars used inside the Supertrend band calculation.
- ST_Factor (Default: 3.0) -> ATR multiplier factor determining upper and lower Supertrend band distance.
Alert Settings
- InpSepAlert (Default: "=== ALERT SETTINGS ===") -> Visual section separator header for notification and alert settings.
- InpAlertPopup (Default: false) -> Enables or disables native MetaTrader 4 pop-up alert dialog windows.
- InpAlertSound (Default: false) -> Enables or disables WAV audio file playback when a new signal is detected.
- InpSoundBuy (Default: "alert.wav") -> Audio filename located in the terminal Sounds folder played for BUY signals.
- InpSoundSell (Default: "alert2.wav") -> Audio filename located in the terminal Sounds folder played for SELL signals.
- InpAlertPush (Default: false) -> Enables or disables push notifications sent to the mobile MetaTrader app via MetaQuotes ID.
- InpAlertEmail (Default: false) -> Enables or disables email notifications sent via configured terminal SMTP settings.
- InpEmailSubject (Default: "TK Cross Signal") -> Subject line prefix used for outgoing signal notification emails.
- InpAlertOnlyNew (Default: false) -> When true, sends notifications only for signals with timestamps strictly newer than the last alerted timestamp per slot.
Display & Size Settings
- InpSepDisplay (Default: "=== DISPLAY & SIZE ===") -> Visual section separator header for dashboard layout and sizing settings.
- InpX (Default: 12) -> Initial horizontal X-coordinate in pixels from the top-left corner of the chart window.
- InpY (Default: 28) -> Initial vertical Y-coordinate in pixels from the top-left corner of the chart window.
- InpScale (Default: 100) -> Global dashboard UI scaling percentage (automatically clamped between 70% and 180%).
- InpRowH (Default: 18) -> Base height in pixels for each signal row in the dashboard table.
- InpFont (Default: 8) -> Base font size in points for dashboard labels and values.
- InpPadX (Default: 8) -> Horizontal inner margin padding in pixels on the left and right edges of the table.
- InpWPair (Default: 68) -> Column width in pixels allocated to the Pair symbol column.
- InpWTF (Default: 34) -> Column width in pixels allocated to the Timeframe column.
- InpWArah (Default: 44) -> Column width in pixels allocated to the Signal Direction column.
- InpWTime (Default: 96) -> Column width in pixels allocated to the Signal Timestamp column.
- InpWEntry (Default: 64) -> Column width in pixels allocated to the Entry Price column.
- InpWSL (Default: 64) -> Column width in pixels allocated to the Stop Loss column.
- InpWTP1 (Default: 64) -> Column width in pixels allocated to the TP1 column.
- InpWTP2 (Default: 64) -> Column width in pixels allocated to the TP2 column.
- InpWBar (Default: 40) -> Column width in pixels allocated to the Bar Offset column.
- InpWUmur (Default: 42) -> Column width in pixels allocated to the Signal Age column.
- InpWOpen (Default: 44) -> Column width in pixels allocated to the OPEN chart-switch button column.
- InpShowEmpty (Default: false) -> When true, displays scanned symbol/timeframe rows even when no valid signal is currently active.
- InpMaxRows (Default: 18) -> Maximum number of signal rows rendered simultaneously in the dashboard table.
Sorting Settings
- InpSepSort (Default: "=== SORTING ===") -> Visual section separator header for table sorting settings.
- InpSortBy (Default: SORT_TIME) -> Default column criterion used to sort signals (SORT_TIME, SORT_PAIR, SORT_TF, or SORT_DIR).
- InpSortNewest (Default: true) -> Sets default sort order to descending (newest signals first) when enabled.
Draw Signal on Chart Settings
- InpSepDraw (Default: "=== DRAW SIGNAL ON CHART ===") -> Visual section separator header for on-chart visual drawing settings.
- InpDrawOnChart (Default: true) -> Enables or disables plotting signal arrows and horizontal price levels on the active chart.
- InpShowArrow (Default: true) -> Displays directional Wingdings arrows at the signal crossover candle.
- InpShowLevels (Default: true) -> Draws horizontal Entry, SL, TP1, and TP2 reference lines with price labels.
- InpExtendBars (Default: 25) -> Number of bars to the right that Entry, SL, and TP lines extend from the signal bar.
- InpArrowCodeBuy (Default: 233) -> Wingdings symbol code used for plotting BUY signal arrows below the candle.
- InpArrowCodeSell (Default: 234) -> Wingdings symbol code used for plotting SELL signal arrows above the candle.
- InpArrowSize (Default: 2) -> Line width/size parameter controlling the visual size of plotted signal arrows.
- InpArrowDistance (Default: 15) -> Vertical offset distance in broker points between the signal candle price and the arrow anchor.
Color Settings
- InpSepColors (Default: "=== COLORS ===") -> Visual section separator header for dashboard and chart object color customization.
- InpColBg (Default: C'18,22,28') -> Main background color of the dashboard container panel.
- InpColHead (Default: C'32,38,48') -> Background color of the dashboard top header bar and column title buttons.
- InpColRow (Default: C'24,28,36') -> Background color for even-numbered signal rows in the table.
- InpColRow2 (Default: C'28,33,42') -> Background color for odd-numbered signal rows for visual row separation.
- InpColText (Default: C'220,225,230') -> Primary text color used for neutral values such as Pair, Timeframe, Time, and Entry.
- InpColBull (Default: C'0,200,83') -> Text highlight color used to indicate bullish BUY signals.
- InpColBear (Default: C'255,82,82') -> Text highlight color used to indicate bearish SELL signals.
- InpColMute (Default: C'120,128,140') -> Muted text color for status bar information, footer hints, and inactive rows.
- InpColAccent (Default: C'41,98,255') -> Accent highlight color for the dashboard title, active sort header, and OPEN buttons.
- InpColArrowBuy (Default: C'0,230,118') -> Color of plotted BUY signal arrows on the price chart.
- InpColArrowSell (Default: C'255,82,82') -> Color of plotted SELL signal arrows on the price chart.
- InpColEntry (Default: C'41,98,255') -> Color of the dotted Entry price line and label on the chart.
- InpColSL (Default: C'255,82,82') -> Color of the dashed Stop Loss price line and label on the chart.
- InpColTP1 (Default: C'0,200,83') -> Color of the dashed TP1 price line and label on the chart.
- InpColTP2 (Default: C'0,230,118') -> Color of the dashed TP2 price line and label on the chart.
Risk Disclaimer
Trading foreign exchange, commodities, and other financial instruments involves significant risk and may not be suitable for all investors. Past performance does not guarantee future results. This software is an analytical and operational tool designed to assist traders in technical analysis; it does not execute trades automatically and does not guarantee financial profit. Always thoroughly test the indicator on a demo account to understand its operational behavior before considering deployment in live trading environments.
