Stochastic Over Scan Dashboard All Pair Timeframe
- Indicadores
- Versão: 1.0
- Ativações: 5
Stochastic Scanner Dashboard for MetaTrader 4
Stochastic Overbought Oversold Scanner Dashboard All Pair Time frame
Overview
- Stochastic Scanner Dashboard is a multi-symbol and multi-timeframe technical analysis indicator and market scanner built for MetaTrader 4 (MT4).
- The tool continuously monitors user-defined currency pairs, metals, or Market Watch symbols across multiple timeframes from one chart.
- It detects momentum shifts using configurable Stochastic Oscillator strategies and validates candidate setups through an optional 15-filter confluence suite.
- For every validated signal, the indicator calculates volatility-adjusted Entry, Stop Loss (SL), Take Profit 1 (TP1), and Take Profit 2 (TP2) levels via ATR.
- Results are organized inside an interactive, sortable, and collapsible on-chart graphical panel with one-click chart switching and alerts.
- This tool operates strictly as an analytical indicator without automated order execution.
Operating Principle and Signal Logic
- Core Oscillator Engine: The scanner evaluates the main (%K) and signal (%D) lines of the Stochastic Oscillator across configured pairs and timeframes on closed bars.
- Strategy Mode 0 (ENTRY_CROSS_SIGNAL): Signals BUY when %K crosses above %D on a closed bar, and SELL when %K crosses below %D.
- Strategy Mode 1 (ENTRY_LEVEL_OBOS): Signals BUY when %K crosses upward out of the oversold level, and SELL when %K crosses downward out of the overbought level.
- Strategy Mode 2 (ENTRY_CROSS_IN_ZONE): Requires a %K/%D crossover occurring inside the oversold or overbought threshold zone.
- Directional Filtering: Restricts detection to both directions, BUY only, or SELL only via InpDirection.
- Multi-Confluence Validation: When any of the 15 optional filters are enabled, a candidate signal must satisfy every active filter condition before display.
- Dynamic ATR Levels: Measures ATR volatility on the signal bar to set Entry at candle close, SL at an ATR multiple, and TP1/TP2 at configured risk-to-reward ratios.
- Closed-Bar Evaluation and Non-Repainting: Core Stochastic and filter checks run strictly on closed bars (Bar 1 within InpLookback). Confirmed signals and plotted levels do not repaint.
- Swing Filter Note: When the optional Fibonacci filter is active, ZigZag swing pivots update dynamically only when new swing extremes form.
Key Technical Features
- Multi-Pair and Multi-Timeframe Scanning: Scans Market Watch instruments or a custom symbol list across up to nine MT4 timeframes on a configurable timer.
- Three Selectable Entry Modes: Supports signal crossovers, OB/OS level breakouts, or extreme-zone crossovers in one indicator.
- Modular 15-Filter Technical Confluence Suite: Includes optional validation modules for RSI Cross, ADX Trend Strength, Single MA, Ichimoku Senkou Span B, Long-Period RSI, Double MA, Awesome Oscillator, Parabolic SAR, Heiken Ashi, CCI Trend, CCI Overbought/Oversold, RVI Trend, RVI Signal Cross, MACD Histogram, MACD Zero Line, Support/Resistance Zones, Fibonacci Retracement Zones, and ATR Supertrend.
- Volatility-Based Trade Levels: Computes Entry, SL, TP1, and TP2 prices normalized to each symbol's digits.
- Interactive Sortable Dashboard Table: Allows real-time sorting by Pair Name, Timeframe, Signal Direction, or Signal Timestamp via column headers.
- One-Click Chart Navigation: Clicking OPEN on any row switches the active chart to that symbol and timeframe and draws arrows plus Entry, SL, TP1, and TP2 lines.
- Persistent UI State: Saves panel coordinates and minimized state in terminal Global Variables across timeframe switches and restarts.
- Four-Channel Alerts: Supports MT4 pop-ups, WAV sounds, mobile push notifications (MetaQuotes ID), and SMTP emails.
Graphical User Interface (GUI) and Color Legend
- PAIR Column: Shows financial instrument symbol name detected by the scanner.
- TF Column: Shows timeframe abbreviation (such as M1, M5, M15, M30, H1, H4, D1) where the signal occurred.
- DIR Column: Shows signal direction as BUY for bullish setups or SELL for bearish setups.
- TIME Column: Shows server date and time of the closed candle that generated the signal.
- ENTRY Column: Shows reference entry price based on the closing price of the signal candle.
- SL Column: Shows ATR-calculated Stop Loss price level.
- TP 1 Column: Shows primary Take Profit price level calculated from the first risk-to-reward multiplier.
- TP 2 (2R) Column: Shows secondary Take Profit price level calculated from the second risk-to-reward multiplier.
- K / D Column: Shows exact Stochastic main (%K) and signal (%D) values recorded on the signal candle.
- AGE Column: Shows elapsed time since the signal candle closed, formatted in seconds (s), minutes (m), hours (h), or days (d).
- OPEN Button Column: Button per active row to open that symbol and timeframe on the current chart and render visual levels.
- Header Action Controls: Includes a REFRESH button to reload symbols and trigger an immediate scan, a CLEAR button to remove panel objects, a MIN/MAX toggle button to collapse or expand the table rows, and a draggable title bar to reposition the panel anywhere on the chart.
- Color Coding Legend (Green): Green tones (`InpColBull`, `InpColArrowBuy`, `InpColTP1`, `InpColTP2`) denote bullish BUY signals, upward signal arrows, and Take Profit target levels.
- Color Coding Legend (Red): Red tones (`InpColBear`, `InpColArrowSell`, `InpColSL`) denote bearish SELL signals, downward signal arrows, and Stop Loss levels.
- Color Coding Legend (Blue): Blue tones (`InpColAccent`, `InpColEntry`) highlight the dashboard title, active sorting header, OPEN buttons, and on-chart Entry reference lines.
- Color Coding Legend (Muted Gray): Gray tones (`InpColMute`) indicate status bar telemetry, operational hints, signal age, and placeholder dashes on empty rows when empty-row display is enabled.
Alert and Notification System
- Terminal Pop-Up Alerts: When `InpAlertPopup` is enabled, an MT4 alert dialog shows symbol, timeframe, direction, time, Entry, SL, TP1, TP2, and K/D.
- Audio Alerts: When `InpAlertSound` is enabled, plays the WAV file in `InpSoundFile` from the MetaTrader Sounds folder.
- Mobile Push Notifications: When `InpAlertPush` is enabled, sends signal summaries to iOS/Android MetaTrader via MetaQuotes ID.
- Email Notifications: When `InpAlertEmail` is enabled, dispatches signal emails via terminal SMTP using `InpEmailSubject`.
- Duplicate Alert Prevention: Tracks the last alerted timestamp per pair/timeframe; `InpAlertOnlyNew` notifies strictly on newer signals.
Resource Management and Performance Optimization
- Multi-Symbol Load: Scanning multiple pairs and timeframes simultaneously fetches historical OHLC data and evaluates buffers per slot.
- Built-In Resource Controls: Use `InpMaxSymbols` to cap the max scanned instruments, `InpBarsCopy` to limit the historical bar depth loaded per timeframe, `InpLookback` to bound the signal search window, and `InpScanSec` to set an appropriate timer refresh interval.
- Deployment Advice: Attach the dashboard to one dedicated chart window rather than multiple charts to keep CPU and memory usage low.
- Historical Data Synchronization: Ensure that historical chart data is downloaded and updated in MetaTrader 4 for all target symbols and timeframes so multi-timeframe calculations execute without missing bar gaps.
Operation and Setup Recommendations
- Recommended Instruments: Suitable for major and minor Forex currency pairs (such as EURUSD, GBPUSD, USDJPY, AUDUSD, USDCAD, USDCHF, NZDUSD, EURJPY, GBPJPY), spot metals (XAUUSD), and liquid indices or CFDs after verifying broker symbol suffixes and spread characteristics.
- Supported Timeframes: Supports all standard MT4 timeframes (M1, M5, M15, M30, H1, H4, D1, W1, MN1), allowing configuration for short-term scalping (M1-M5), intraday trading (M15-H1), or swing analysis (H4-D1).
- Broker Account Compatibility: Compatible with both Hedging and Netting account types as well as 4-digit and 5-digit broker pricing formats.
- Execution and Spread Considerations: Because signals are evaluated on closed candles and ATR levels use reference close prices, traders should account for their broker's live bid-ask spread and commission structure when evaluating Entry, Stop Loss, and Take Profit distances, particularly on lower timeframes (M1-M5).
- Continuous Monitoring Setup: For uninterrupted background scanning and mobile push or email alerts across trading sessions, running MetaTrader 4 on a stable desktop workstation or standard Windows VPS is recommended.
Input Parameters Documentation
- Section 1: Entry Logic and Stochastic Settings
- InpSecEntry (Default: "=== [1] ENTRY LOGIC & STOCHASTIC SETTINGS ==="): Header for core Stochastic parameters.
- InpEntryMode (Default: ENTRY_LEVEL_OBOS): Selects the Stochastic entry logic mode (0: Signal Cross, 1: OB/OS Level Cross, 2: Cross Inside OB/OS Zone).
- InpKPeriod (Default: 10): Main %K period length (bars).
- InpDPeriod (Default: 3): Signal %D moving average smoothing period (bars).
- InpSlowing (Default: 3): Internal slowing factor for %K line (bars).
- InpMethod (Default: MODE_SMA): Moving average method for Stochastic smoothing (SMA, EMA, SMMA, or LWMA).
- InpPrice (Default: STO_CLOSECLOSE_MT4): Price field for Stochastic calculation (0: Low/High range, 1: Close/Close prices).
- LevelOversold (Default: 20.0): Oversold threshold level for Level Cross and Zone Cross modes.
- LevelOverbought (Default: 80.0): Overbought threshold level for Level Cross and Zone Cross modes.
- InpDirection (Default: 0): Filters allowed signal directions (0: Both Buy and Sell, 1: Buy signals only, 2: Sell signals only).
- InpLookback (Default: 100): Max closed historical bars searched backward per timeframe to locate the most recent valid signal (bars).
- Section 2: ATR Risk and Reward Settings
- InpSecATR (Default: "=== ATR RISK & REWARD SETTINGS ==="): Header for ATR Stop Loss and Take Profit parameters.
- InpATRPeriod (Default: 14): Period for the Average True Range volatility indicator (bars).
- InpATRMulSL (Default: 1.5): Multiplier for ATR value to determine Stop Loss distance from entry.
- InpTP1_RR (Default: 1.0): Risk-to-reward ratio multiplier for Stop Loss distance to calculate Take Profit 1.
- InpTP2_RR (Default: 2.0): Risk-to-reward ratio multiplier for Stop Loss distance to calculate Take Profit 2.
- Section 3: Scanner Configuration
- InpSecScanner (Default: "=== SCANNER CONFIGURATION ==="): Header for symbol, timeframe, and timer scan settings.
- InpSymbols (Default: "EURUSD,GBPUSD,USDJPY,AUDUSD,USDCAD,USDCHF,NZDUSD,EURJPY,GBPJPY,XAUUSD"): Comma-separated list of custom symbols to scan when Market Watch scanning is disabled.
- InpTimeframes (Default: "M1,M5,M15,M30,H1,H4,D1"): Comma-separated list of timeframes scanned for each active symbol.
- InpUseWatch (Default: true): Activates automatic scanning of symbols currently listed in the MetaTrader Market Watch window when set to true.
- InpMaxSymbols (Default: 10): Max symbols loaded and scanned simultaneously by the dashboard (symbols).
- InpScanSec (Default: 7): Automatic timer interval between full multi-pair background scans (in seconds, minimum 3 seconds).
- InpBarsCopy (Default: 200): Count of historical bars copied per symbol and timeframe for indicator and filter evaluation (bars).
- Section 4: Alert Settings
- InpSecAlerts (Default: "=== ALERT SETTINGS ==="): Header for notification and alert parameters.
- InpAlertPopup (Default: false): Toggles MetaTrader terminal pop-up alert windows on signal.
- InpAlertSound (Default: false): Toggles audio alert playback on signal.
- InpSoundFile (Default: "alert.wav"): Filename of the WAV sound file played for audio alerts.
- InpAlertPush (Default: false): Toggles push notifications to the MetaTrader mobile application.
- InpAlertEmail (Default: false): Toggles email notifications via terminal SMTP configuration.
- InpEmailSubject (Default: "Stochastic Scanner Signal"): Subject line prefix for outgoing signal alert emails.
- InpAlertOnlyNew (Default: false): Restricts alerts strictly to newly detected signals with timestamps newer than previously alerted signals.
- Section 5: Display and Layout Settings
- InpSecDisplay (Default: "=== DISPLAY & LAYOUT SETTINGS ==="): Header for dashboard dimensions and column widths.
- InpX (Default: 12): Initial horizontal X-coordinate offset of the dashboard from upper-left corner (pixels).
- InpY (Default: 28): Initial vertical Y-coordinate offset of the dashboard from upper-left corner (pixels).
- InpScale (Default: 100): Global interface scaling percentage for high-DPI or standard monitors (clamped between 70% and 180%).
- InpRowH (Default: 18): Height of each signal row in table (pixels).
- InpFont (Default: 8): Base font size for table cell text elements (in points).
- InpPadX (Default: 8): Horizontal inner padding on the left and right edges of the dashboard table (pixels).
- InpWPair (Default: 68): Width of PAIR symbol column (pixels).
- InpWTF (Default: 34): Width of TF timeframe column (pixels).
- InpWDir (Default: 44): Width of DIR signal direction column (pixels).
- InpWTime (Default: 100): Width of TIME signal timestamp column (pixels).
- InpWEntry (Default: 64): Width of ENTRY price column (pixels).
- InpWSL (Default: 64): Width of SL Stop Loss column (pixels).
- InpWTP1 (Default: 64): Width of TP1 Take Profit 1 column (pixels).
- InpWTP2 (Default: 64): Width of TP2 Take Profit 2 column (pixels).
- InpWStoch (Default: 64): Width of K/D Stochastic value column (pixels).
- InpWAge (Default: 44): Width of AGE elapsed time column (pixels).
- InpWOpen (Default: 44): Width of OPEN chart action button column (pixels).
- InpShowEmpty (Default: false): Shows symbol and timeframe rows with dashes even when no valid signal is currently active.
- InpMaxRows (Default: 17): Max visible signal rows shown in table (rows).
- Section 6: Sorting Configuration
- InpSecSort (Default: "=== SORTING CONFIGURATION ==="): Header for default table sorting parameters.
- InpSortBy (Default: SORT_TIME): Default table sorting field (0: Latest signal time, 1: Pair name, 2: Timeframe, 3: Direction).
- InpSortNewest (Default: true): Places the most recent signals in the upper rows when sorting by signal time.
- Section 7: On-Chart Visual Settings
- InpSecVisual (Default: "=== ON-CHART VISUAL SETTINGS ==="): Header for active chart arrow and level drawing parameters.
- InpDrawOnChart (Default: true): Toggles rendering the current chart's latest detected signal arrows and price levels.
- InpShowArrow (Default: true): Toggles drawing directional Wingdings arrows at the signal candle.
- InpShowLevels (Default: true): Toggles drawing horizontal lines and price labels for Entry, SL, TP1, and TP2.
- InpExtendBars (Default: 25): Count of bars to the right that Entry, SL, and TP lines extend from the signal candle (bars).
- InpArrowCodeBuy (Default: 233): Wingdings character code for bullish Buy signal arrows.
- InpArrowCodeSell (Default: 234): Wingdings character code for bearish Sell signal arrows.
- InpArrowSize (Default: 2): Thickness/size of on-chart signal arrows (1 to 5).
- InpArrowDistance (Default: 15): Vertical offset spacing between the signal candle price and the signal arrow (points).
- Section 8: Color Palette
- InpSecColors (Default: "=== COLOR PALETTE ==="): Header for dashboard and chart object color settings.
- InpColBg (Default: C'18,22,28'): Color for main dashboard container.
- InpColHead (Default: C'32,38,48'): Color for dashboard header bar and control buttons.
- InpColRow (Default: C'24,28,36'): Color for even-indexed table rows.
- InpColRow2 (Default: C'28,33,42'): Color for odd-indexed table rows.
- InpColText (Default: C'220,225,230'): Primary text color for pair names, timeframes, timestamps, and entry values.
- InpColBull (Default: C'0,200,83'): Text color for bullish BUY labels in table.
- InpColBear (Default: C'255,82,82'): Text color for bearish SELL labels in table.
- InpColMute (Default: C'120,128,140'): Muted text color for status telemetry, footer hints, signal age, and inactive placeholders.
- InpColAccent (Default: C'41,98,255'): Accent color for the dashboard title, active sort column text, and OPEN buttons.
- InpColArrowBuy (Default: C'0,230,118'): Color for bullish Buy arrows on chart.
- InpColArrowSell (Default: C'255,82,82'): Color for bearish Sell arrows on chart.
- InpColEntry (Default: C'41,98,255'): Color for on-chart Entry trendline and price label.
- InpColSL (Default: C'255,82,82'): Color for Stop Loss values in table and Stop Loss lines on the chart.
- InpColTP1 (Default: C'0,200,83'): Color for Take Profit 1 values in table and TP1 lines on the chart.
- InpColTP2 (Default: C'0,230,118'): Color for Take Profit 2 values in table and TP2 lines on the chart.
- Section 9: Optional 15-Filter Confluence Suite Parameters
- InpFilter1 (Default: "=== 1. RSI CROSS FILTER ==="): Header for RSI oversold/overbought crossover filter.
- Use_RSI_Cross_Filter (Default: false): Toggles RSI threshold crossover validation.
- RSI_Length (Default: 14): Period for RSI Cross filter (bars).
- RSI_Price_Source (Default: PRICE_CLOSE): Price source for RSI calculation.
- RSI_Oversold (Default: 30.0): Oversold threshold level that RSI must cross above to validate Buy signals.
- RSI_Overbought (Default: 70.0): Overbought threshold level that RSI must cross below to validate Sell signals.
- InpFilter2 (Default: "=== 2. ADX FILTER ==="): Header for Average Directional Index trend strength filter.
- Use_ADX_Filter (Default: false): Toggles min ADX trend strength validation.
- ADX_Period (Default: 10): Period for ADX filter (bars).
- ADX_Min_Level (Default: 20.0): Min ADX main line value required to allow signals.
- InpFilter3 (Default: "=== 3. SINGLE MA FILTER ==="): Header for Single MA trend filter.
- Use_MA_Filter (Default: false): Toggles price position filtering relative to a single MA.
- MA_Period (Default: 50): Period for Single MA filter (bars).
- MA_Method (Default: MODE_SMA): Smoothing method for Single MA (SMA, EMA, SMMA, or LWMA).
- MA_Shift (Default: 0): Bar shift for Single MA (bars).
- InpFilter4 (Default: "=== 4. ICHIMOKU SENKOU SPAN B FILTER ==="): Header for Ichimoku Kinko Hyo Senkou Span B filter.
- Use_Ichimoku_Filter (Default: false): Toggles price position filtering above or below Ichimoku Senkou Span B.
- Ichimoku_Tenkan (Default: 9): Tenkan-sen (Conversion Line) period (bars).
- Ichimoku_Kijun (Default: 26): Kijun-sen (Base Line) period (bars).
- Ichimoku_SenkouB (Default: 52): Senkou Span B (Leading Span B) period (bars).
- InpFilter5 (Default: "=== 5. RSI 75 FILTER ==="): Header for long-period RSI 50-midline trend bias filter.
- Use_RSI75_Filter (Default: false): Toggles long-period RSI 50-level directional bias validation.
- RSI_Filter_Period (Default: 75): Period for long-period RSI trend filter (bars).
- InpFilter6 (Default: "=== 6. DOUBLE MA FILTER ==="): Header for dual MA trend alignment filter.
- Use_DoubleMA_Filter (Default: false): Toggles fast-versus-slow MA trend alignment validation.
- MA_A_Period (Default: 30): Period for Fast MA A (bars).
- MA_A_Method (Default: MODE_EMA): Smoothing method for Fast MA A.
- MA_A_Applied (Default: PRICE_CLOSE): Price source for Fast MA A.
- MA_A_Shift (Default: 0): Bar shift for Fast MA A (bars).
- MA_B_Period (Default: 140): Period for Slow MA B (bars).
- MA_B_Method (Default: MODE_EMA): Smoothing method for Slow MA B.
- MA_B_Applied (Default: PRICE_CLOSE): Price source for Slow MA B.
- MA_B_Shift (Default: 0): Bar shift for Slow MA B (bars).
- InpFilter7 (Default: "=== 7. AWESOME OSCILLATOR FILTER ==="): Header for Bill Williams Awesome Oscillator (AO) filter.
- Use_AO_Filter (Default: false): Toggles Awesome Oscillator momentum confirmation.
- Use_AO_Volume_Filter (Default: false): Toggles min positive/negative AO amplitude threshold checks.
- AO_Buy_Min (Default: 4.0): Min AO histogram value required for Buy validation with amplitude filter.
- AO_Sell_Max (Default: -4.0): Max negative AO histogram value required for Sell validation with amplitude filter.
- Use_AO_Color_Filter (Default: false): Needs AO histogram bar slope to rise for Buy or fall for Sell.
- Use_AO_Zero_Filter (Default: false): Needs AO histogram to be above zero for Buy or below zero for Sell with aligned slope.
- InpFilter8 (Default: "=== 8. PARABOLIC SAR FILTER ==="): Header for Parabolic SAR trend filter.
- Use_SAR_Filter (Default: false): Toggles Parabolic SAR dot position validation relative to closing price.
- SAR_Step (Default: 0.02): Acceleration factor step increment for Parabolic SAR.
- SAR_Maximum (Default: 0.2): Max acceleration factor cap for Parabolic SAR.
- InpFilter9 (Default: "=== 9. HEIKEN ASHI FILTER ==="): Header for smoothed Heiken Ashi candlestick filter.
- Use_HeikenAshi_Filter (Default: false): Toggles Heiken Ashi candle bullish or bearish body polarity confirmation.
- InpFilter10 (Default: "=== 10. CCI TREND FILTER ==="): Header for Commodity Channel Index zero-line trend filter.
- Use_CCI_Filter (Default: false): Toggles CCI zero-level directional trend validation.
- CCI_Period (Default: 50): Period for Trend CCI filter (bars).
- CCI_Applied (Default: PRICE_CLOSE): Price source for Trend CCI calculation.
- InpFilter11 (Default: "=== 11. CCI OB & OS FILTER ==="): Header for CCI extreme momentum threshold filter.
- Use_CCI_OBOS_Filter (Default: false): Toggles CCI overbought/oversold threshold validation.
- CCI_OBOS_Period (Default: 14): Period for OB/OS CCI filter (bars).
- CCI_OBOS_Applied (Default: PRICE_CLOSE): Price source for OB/OS CCI calculation.
- CCI_Overbought (Default: 100.0): Upper CCI level threshold.
- CCI_Oversold (Default: -100.0): Lower CCI level threshold.
- InpFilter12 (Default: "=== 12. RVI FILTERS ==="): Header for Relative Vigor Index (RVI) trend and signal filters.
- Use_RVI_Filter (Default: false): Toggles RVI main line zero-level directional filter.
- RVI_Period (Default: 75): Period for RVI trend filter (bars).
- Use_RVI_Signal_Filter (Default: false): Toggles RVI main line versus signal line crossover position filter.
- RVI_Signal_Period (Default: 20): Period for RVI signal comparison filter (bars).
- InpFilter13 (Default: "=== 13. MACD FILTERS ==="): Header for MACD histogram and zero-line filters.
- Use_MACD_Filter (Default: false): Toggles MACD histogram polarity validation (MACD main minus signal).
- MACD_FastEMA (Default: 12): Fast EMA period for MACD calculation (bars).
- MACD_SlowEMA (Default: 26): Slow EMA period for MACD calculation (bars).
- MACD_SignalSMA (Default: 9): Signal SMA smoothing period for MACD calculation (bars).
- MACD_Applied (Default: PRICE_CLOSE): Price source for MACD calculation.
- Use_MACD_Zero_Filter (Default: false): Toggles MACD main line zero-axis trend direction validation.
- InpFilter14 (Default: "=== 14. SR & FIBONACCI FILTERS ==="): Header for Support/Resistance and Fibonacci Retracement filters.
- Use_SR_Filter (Default: false): Toggles dynamic swing high/low Support and Resistance zone proximity validation.
- SR_Period (Default: 50): Historical lookback window to detect Support and Resistance bounds (bars).
- SR_Zone_Points (Default: 80): Price tolerance zone around detected Support and Resistance levels (points).
- Use_Fib_Filter (Default: false): Toggles ZigZag-based Fibonacci retracement zone validation.
- Fib_Level_1 (Default: 0.382): First Fibonacci retracement ratio boundary.
- Fib_Level_2 (Default: 0.618): Second Fibonacci retracement ratio boundary.
- ZigZag_Depth (Default: 12): Min bar depth parameter for ZigZag swing point detection (bars).
- ZigZag_Deviation (Default: 5): Min price deviation required for ZigZag swing validation (points).
- ZigZag_Backstep (Default: 3): Min bar distance between consecutive ZigZag swing highs or lows (bars).
- InpFilter15 (Default: "=== 15. SUPERTREND FILTER ==="): Header for ATR-based Supertrend directional filter.
- Use_Supertrend_Filter (Default: false): Toggles Supertrend directional trend confirmation.
- ST_AtrPeriod (Default: 10): ATR period inside the Supertrend band calculation (bars).
- ST_Factor (Default: 3.0): ATR multiplier factor determining Supertrend band width.
Risk Disclaimer
- Trading foreign exchange, precious metals, indices, and other leveraged financial instruments carries a high level of risk and may not be suitable for all investors.
- Past indicator signals, historical chart patterns, or simulated observations do not guarantee future market performance or financial returns.
- This indicator is an analytical and visual market-scanning utility designed solely to assist with technical chart analysis; it does not provide financial or investment advice.
- Always test and evaluate the indicator thoroughly on a MetaTrader demo account to understand its scanning behavior and parameter settings before applying it to live market analysis.
