Parabolic RSI Trend Reversal Signal Multi Filter
- 지표
- 버전: 1.0
- 활성화: 5
Parabolic RSI Trend Reversal Signal Multi Filter
Overview
Parabolic RSI Multi Filter is a technical analysis indicator for MetaTrader 4 (MT4) that operates in a dedicated oscillator subwindow while plotting confirmed directional arrows and dynamic ATR-based risk-reward reference levels on the main chart. Standard Relative Strength Index (RSI) readings often remain extended inside overbought or oversold zones during sustained trends, producing premature counter-trend entries when traders rely solely on static 30 and 70 threshold crosses. By applying Parabolic Stop and Reverse (SAR) directional tracking directly onto the RSI oscillator curve, this indicator identifies momentum inflection points within the oscillator itself. To refine signal selection across diverse market regimes, the software integrates an optional 15-module confirmation suite alongside an automated Average True Range (ATR) target engine that draws Entry, Stop Loss (SL), and three Take Profit levels (TP1, TP2, TP3) exclusively for the latest confirmed signal.
Operating Principle and Signal Logic
The analytical architecture combines four coordinated modules: a Relative Strength Index (RSI) oscillator calculation, a Parabolic SAR state engine applied to RSI values, a modular 15-filter trend and price-structure confirmation framework, and an ATR volatility target calculator. All signal evaluations occur strictly upon candle closure (Bar 1). Because directional crossovers and filter checks are evaluated only after a candle completes and locks its final OHLC data, confirmed arrows on the main chart and historical Parabolic SAR dots in the subwindow are non-repainting and remain fixed on the chart.
Bullish Signal (Buy) Conditions:
- On a completed candle (Bar 1), the RSI curve crosses above the active bearish Parabolic SAR dot level, transitioning the oscillator SAR regime from bearish to bullish.
- Every enabled module in the optional 15-filter confirmation suite must simultaneously satisfy its bullish alignment rule on that same closed candle (macro trend direction, momentum polarity, oscillator bias, or structural support proximity).
- Upon full bar-close confirmation, an upward Buy arrow appears below the signal candle low, the active ATR target overlay updates to the new bullish setup, and enabled terminal or mobile alerts fire once per closed bar.
Bearish Signal (Sell) Conditions:
- On a completed candle (Bar 1), the RSI curve crosses below the active bullish Parabolic SAR dot level, transitioning the oscillator SAR regime from bullish to bearish.
- Every enabled module in the optional 15-filter confirmation suite must simultaneously satisfy its bearish alignment rule on that same closed candle (bearish trend regime, negative momentum slope, oscillator bias, or structural resistance proximity).
- Upon full bar-close confirmation, a downward Sell arrow appears above the signal candle high, the active ATR target overlay updates to the new bearish setup, and enabled terminal or mobile alerts fire once per closed bar.
Signal Reversal and Target Management Logic:
- This product operates strictly as an analytical indicator and does not open, modify, or close live or pending trading orders automatically.
- Active Entry, SL, TP1 (1R), TP2 (2R), and TP3 (3R) horizontal reference lines remain displayed on the chart until a subsequent opposing Buy or Sell signal confirms on a closed bar, shifting the target overlay to the newest setup.
- Traders can reference opposing Parabolic RSI reversals or the plotted 1R, 2R, and 3R ATR targets as structured levels for partial profit-taking, stop placement, and discretionary trade management.
Key Technical Features
- Hybrid Oscillator Tracking Engine: Applies Parabolic SAR acceleration and reversal tracking directly onto the RSI curve rather than raw price candles, highlighting momentum shifts inside the subwindow.
- Non-Repainting Bar-Close Execution: Evaluates all signal conditions strictly on closed candles (shift 1 and higher), ensuring historical arrows and subwindow SAR dots do not shift, recalculate backward, or disappear.
- Modular 15-Filter Confirmation Framework: Incorporates 15 independent technical filters covering RSI threshold crosses, ADX trend strength, Single MA, Ichimoku Senkou Span B, Long-Period RSI bias, Double MA crossover, Awesome Oscillator (amplitude, slope, and zero-line modes), Price Parabolic SAR, Heiken Ashi candle polarity, CCI trend, CCI overbought/oversold breakouts, RVI zero and signal-line alignment, MACD histogram and zero-line polarity, swing Support/Resistance with ZigZag Fibonacci retracement zones, and Wilder ATR Supertrend.
- Dynamic ATR Risk-Reward Target Overlay: Computes the 1R Stop Loss risk distance from the signal candle ATR multiplied by a user-defined factor, automatically plotting Entry, SL, TP1 (1:1 RR), TP2 (2:1 RR), and TP3 (3:1 RR) lines and price labels exclusively for the latest signal to preserve chart readability.
- Incremental Tick State Continuation: Stores a persistent Parabolic SAR state snapshot at closed bars so incoming ticks update only the active chart edge without full-history recalculation.
- Four-Channel Alert Dispatcher: Delivers MT4 desktop pop-up alerts, separate Buy and Sell .wav audio alerts, MetaTrader mobile push notifications via MetaQuotes ID, and SMTP email notifications with duplicate-alert protection per bar timestamp.
- Automatic Chart Object Cleanup: Removes all indicator-generated arrows, horizontal target lines, and price labels cleanly when detached or reinitialized.
Filter Configuration Profiles and Practical Workflow
- Trend-Continuation Setup: Combine the core Parabolic RSI signal with Filter 2 (ADX Trend Strength), Filter 3 (Single MA) or Filter 6 (Double MA), and Filter 15 (Supertrend) to restrict signals to established trends while filtering out low-volatility consolidation ranges.
- Pullback and Structure Setup: Enable Filter 14 (Support/Resistance and ZigZag Fibonacci Retracement) alongside Filter 9 (Heiken Ashi) or Filter 13 (MACD) to isolate Parabolic RSI momentum reversals occurring near swing zones or key Fibonacci retracement bands.
- Momentum Confluence Setup: Pair the primary oscillator reversal with Filter 5 (Long-Period RSI 75 Bias), Filter 10 (CCI Trend), or Filter 12 (RVI Trend and Signal) to align short-term oscillator inflections with broader momentum polarity.
- Step-by-Step Chart Deployment: Open the target instrument and timeframe in MT4, attach Parabolic RSI Multi Filter from the Navigator panel, configure core RSI/SAR sensitivity and ATR multiplier in Section 1 and Section 2, activate desired filters (all 15 filters default to false for selective customization), and verify terminal notification settings under Tools -> Options prior to live monitoring.
Graphical Interface and Alert System
Subwindow Visual Elements:
- DodgerBlue Solid Line (Width 2): Displays the calculated RSI oscillator line inside the separate subwindow, bounded by dotted reference levels at 30.0 and 70.0.
- Lime Dots (Bullish Parabolic SAR): Plotted beneath the RSI line whenever the oscillator momentum state is bullish.
- Red Dots (Bearish Parabolic SAR): Plotted above the RSI line whenever the oscillator momentum state is bearish.
Main Chart Visual Elements:
- Aqua Upward Arrow: Plotted beneath the signal candle low to mark a confirmed bullish Buy signal.
- Red Downward Arrow: Plotted above the signal candle high to mark a confirmed bearish Sell signal.
- Gold Solid Line (Entry): Displays the closing reference price of the most recent confirmed signal candle.
- Red Dashed Line (SL): Displays the ATR-based Stop Loss reference level at 1.0x risk distance from Entry.
- LimeGreen, MediumSeaGreen, and DodgerBlue Dashed Lines (TP1, TP2, TP3): Display progressive Take Profit targets at 1R, 2R, and 3R multiples of risk distance with right-aligned price labels.
Notification Mechanisms:
- Desktop Pop-Up Alert: Opens an immediate MT4 terminal alert window containing signal direction (BUY or SELL), symbol, timeframe, Entry, SL, TP1, TP2, and TP3 values.
- Audible Sound Alert: Plays distinct user-configured .wav audio files located in the MetaTrader Sounds directory for Buy and Sell events.
- Mobile Push Notification: Sends formatted signal parameters directly to iOS or Android MetaTrader mobile apps linked via MetaQuotes ID.
- Email Alert: Transmits formatted signal alerts through the terminal SMTP email configuration.
Operational Recommendations and Performance Notes
- Supported Instruments: Suitable for liquid Forex major and cross pairs (EURUSD, GBPUSD, USDJPY, AUDUSD, USDCAD, EURJPY), spot metals (XAUUSD), and major equity index CFDs; compare broker spread and commission costs against the plotted 1R ATR Stop Loss distance prior to live trading.
- Recommended Timeframes: Adaptable across multiple trading horizons, including M5 and M15 for intraday momentum setups, M30 and H1 for structured day trading, and H4 or D1 for swing trend-reversal evaluation.
- Account and Execution Environment: Compatible with both Hedging and Netting MT4 account structures across standard or ECN/Raw spread feeds; candle-close confirmation avoids sensitivity to sub-second tick latency, though stable broker feeds ensure consistent ATR and filter readings.
- CPU and Memory Efficiency: Requires at least 100 historical bars on the chart to initialize all filter buffers and uses incremental bar calculation to keep routine CPU usage low. However, enabling multiple computationally intensive modules simultaneously (Support/Resistance scans, ZigZag Fibonacci detection, Supertrend) across numerous open charts increases RAM and CPU load, so limit simultaneous chart instances on modest hardware.
Input Parameters Documentation
All parameters below appear in the MetaTrader 4 Inputs tab. Strings InpSection1 to InpSection3 and InpFilter1 to InpFilter15 act as visual section headers in the settings window.
Section 1: Entry Logic and Parabolic RSI Settings (InpSection1)
- InpRSIPeriod (Default: 14, Unit: bars) -> Lookback period in bars for the primary RSI curve in the subwindow; lower values increase sensitivity while higher values smooth noise.
- InpSARStep (Default: 0.02, Unit: step) -> Initial acceleration factor and increment added when RSI sets a new directional extreme.
- InpSARMaximum (Default: 0.20, Unit: cap) -> Maximum upper limit for the Parabolic SAR acceleration factor during extended RSI swings.
- ColorBull (Default: clrLime, Unit: color) -> Color of bullish Parabolic SAR dots plotted beneath the RSI line in the subwindow.
- ColorBear (Default: clrRed, Unit: color) -> Color of bearish Parabolic SAR dots plotted above the RSI line in the subwindow.
- ShowArrows (Default: true, Unit: bool) -> Enables or disables Buy and Sell signal arrows on the main price chart.
- BuyArrowColor (Default: clrAqua, Unit: color) -> Color of upward Buy arrows drawn below bullish signal candles.
- SellArrowColor (Default: clrRed, Unit: color) -> Color of downward Sell arrows drawn above bearish signal candles.
- ArrowSize (Default: 2, Unit: size 1-5) -> Visual size and thickness index of Buy and Sell arrows on the chart.
Section 2: ATR and Target Levels SL/TP Settings (InpSection2)
- InpShowSLTP (Default: true, Unit: bool) -> Enables or disables Entry, SL, TP1, TP2, and TP3 lines and labels for the latest confirmed signal.
- InpATRPeriod (Default: 7, Unit: bars) -> Lookback period in bars used to compute the ATR volatility baseline at signal close.
- InpATRMultiplier (Default: 1.5, Unit: multiplier) -> Multiplier applied to signal-bar ATR to define the 1R Stop Loss risk distance from Entry.
- InpLineExtendBars (Default: 1, Unit: bars) -> Number of bars extending active target lines and labels right of bar 0.
- InpFontSize (Default: 8, Unit: pt) -> Text font size applied to Entry, SL, TP1, TP2, and TP3 price and risk-multiple labels.
- InpColorEntry (Default: clrGold, Unit: color) -> Line and label color for the confirmed signal Entry price.
- InpColorSL (Default: clrRed, Unit: color) -> Line and label color for the ATR-calculated Stop Loss level.
- InpColorTP1 (Default: clrLimeGreen, Unit: color) -> Line and label color for Take Profit 1 at 1.0x risk distance (1R).
- InpColorTP2 (Default: clrMediumSeaGreen, Unit: color) -> Line and label color for Take Profit 2 at 2.0x risk distance (2R).
- InpColorTP3 (Default: clrDodgerBlue, Unit: color) -> Line and label color for Take Profit 3 at 3.0x risk distance (3R).
- InpTargetLineStyle (Default: STYLE_DASH, Unit: line style) -> Drawing style (solid, dash, dot, dash-dot) applied to SL, TP1, TP2, and TP3 lines.
- InpLineWidth (Default: 1, Unit: pixels) -> Line thickness in pixels for Entry, Stop Loss, and Take Profit horizontal lines.
Section 3: Notifications and Alerts Settings (InpSection3)
- Enable_Popup_Alert (Default: true, Unit: boolean) -> Enables or disables MT4 desktop pop-up alert dialogs on confirmed signals.
- Enable_Sound_Alert (Default: true, Unit: boolean) -> Enables or disables local .wav audio playback when a confirmed signal triggers.
- Sound_Buy (Default: "ok.wav", Unit: filename) -> Audio file in the MetaTrader Sounds folder played upon a Buy signal.
- Sound_Sell (Default: "timeout.wav", Unit: filename) -> Audio file in the MetaTrader Sounds folder played upon a Sell signal.
- Enable_Push_Notif (Default: true, Unit: boolean) -> Enables or disables mobile push notifications via MetaQuotes ID.
- Enable_Email_Alert (Default: false, Unit: boolean) -> Enables or disables SMTP email signal alerts via terminal mail settings.
Filter 1: RSI Cross Filter (InpFilter1)
- Use_RSI_Cross_Filter (Default: false, Unit: boolean) -> Enables or disables secondary RSI threshold-crossing confirmation on the signal candle.
- RSI_Length (Default: 14, Unit: bars) -> Calculation period in bars for the secondary RSI threshold-crossing filter.
- RSI_Price_Source (Default: PRICE_CLOSE, Unit: applied price) -> Candle price series (Close, Open, High, Low, Median, Typical, Weighted) for RSI filtering.
- RSI_Oversold (Default: 30.0, Unit: RSI points) -> Lower threshold that filter RSI must cross above from below to validate Buy signals.
- RSI_Overbought (Default: 70.0, Unit: RSI points) -> Upper threshold that filter RSI must cross below from above to validate Sell signals.
Filter 2: ADX Trend Strength Filter (InpFilter2)
- Use_ADX_Filter (Default: false, Unit: boolean) -> Enables or disables Average Directional Index (ADX) trend-strength filtering.
- ADX_Period (Default: 10, Unit: bars) -> Averaging period in bars used to compute the main ADX line.
- ADX_Min_Level (Default: 20.0, Unit: ADX points) -> Minimum ADX reading at signal close required to permit signals and exclude flat markets.
Filter 3: Single Moving Average Filter (InpFilter3)
- Use_MA_Filter (Default: false, Unit: boolean) -> Enables or disables single MA directional trend filtering (close above MA for Buy; below for Sell).
- MA_Period (Default: 50, Unit: bars) -> Averaging period in bars for the single MA trend baseline.
- MA_Method (Default: MODE_SMA, Unit: MA method) -> Smoothing algorithm (SMA, EMA, SMMA, LWMA) applied to the single MA filter.
- MA_Shift (Default: 0, Unit: bars) -> Horizontal bar shift offset applied to the single MA series.
Filter 4: Ichimoku Senkou Span B Filter (InpFilter4)
- Use_Ichimoku_Filter (Default: false, Unit: boolean) -> Enables or disables Ichimoku Kinko Hyo Senkou Span B cloud boundary filtering.
- Ichimoku_Tenkan (Default: 9, Unit: bars) -> Conversion line (Tenkan-sen) calculation period in bars.
- Ichimoku_Kijun (Default: 26, Unit: bars) -> Base line (Kijun-sen) calculation period in bars.
- Ichimoku_SenkouB (Default: 52, Unit: bars) -> Leading Span B period in bars; Buy requires candle close above Senkou Span B, Sell requires close below.
Filter 5: Long-Period RSI Bias Filter (InpFilter5)
- Use_RSI75_Filter (Default: false, Unit: boolean) -> Enables or disables long-period RSI 50.0 midpoint directional bias filtering.
- RSI_Filter_Period (Default: 75, Unit: bars) -> Lookback period in bars for macro RSI trend filtering (above 50.0 for Buy; below 50.0 for Sell).
Filter 6: Double Moving Average Filter (InpFilter6)
- Use_DoubleMA_Filter (Default: false, Unit: boolean) -> Enables or disables dual MA regime alignment (fast MA A above slow MA B for Buy; below for Sell).
- MA_A_Period (Default: 30, Unit: bars) -> Lookback period in bars for fast Moving Average MA A.
- MA_A_Method (Default: MODE_EMA, Unit: MA method) -> Smoothing method (SMA, EMA, SMMA, LWMA) applied to MA A.
- MA_A_Applied (Default: PRICE_CLOSE, Unit: applied price) -> Candle price series applied to MA A.
- MA_A_Shift (Default: 0, Unit: bars) -> Horizontal bar shift offset for MA A.
- MA_B_Period (Default: 140, Unit: bars) -> Lookback period in bars for slow Moving Average MA B.
- MA_B_Method (Default: MODE_EMA, Unit: MA method) -> Smoothing method (SMA, EMA, SMMA, LWMA) applied to MA B.
- MA_B_Applied (Default: PRICE_CLOSE, Unit: applied price) -> Candle price series applied to MA B.
- MA_B_Shift (Default: 0, Unit: bars) -> Horizontal bar shift offset for MA B.
Filter 7: Awesome Oscillator Filter (InpFilter7)
- Use_AO_Filter (Default: false, Unit: boolean) -> Primary toggle enabling or disabling Awesome Oscillator (AO) momentum sub-filters.
- Use_AO_Volume_Filter (Default: false, Unit: boolean) -> Enables or disables minimum AO histogram amplitude threshold checks.
- AO_Buy_Min (Default: 4.0, Unit: AO value) -> Minimum positive AO reading required for Buy signals when amplitude filtering is active.
- AO_Sell_Max (Default: -4.0, Unit: AO value) -> Maximum negative AO reading required for Sell signals when amplitude filtering is active.
- Use_AO_Color_Filter (Default: false, Unit: boolean) -> Enables or disables bar-over-bar AO histogram slope checks (rising for Buy; falling for Sell).
- Use_AO_Zero_Filter (Default: false, Unit: boolean) -> Enables or disables AO zero-line alignment combined with directional bar slope.
Filter 8: Price Parabolic SAR Filter (InpFilter8)
- Use_SAR_Filter (Default: false, Unit: boolean) -> Enables or disables price-chart Parabolic SAR filtering (close above SAR for Buy; below for Sell).
- SAR_Step (Default: 0.02, Unit: step) -> Acceleration factor step increment for the price-based Parabolic SAR filter.
- SAR_Maximum (Default: 0.2, Unit: cap) -> Maximum acceleration limit for the price-based Parabolic SAR filter.
Filter 9: Heiken Ashi Filter (Header: InpFilter9)
- Use_HeikenAshi_Filter (Default: false, Unit: boolean) -> Enables or disables smoothed Heiken Ashi candle body polarity filtering (bullish body for Buy; bearish for Sell).
Filter 10: CCI Trend Filter (InpFilter10)
- Use_CCI_Filter (Default: false, Unit: boolean) -> Enables or disables Commodity Channel Index (CCI) zero-line trend filtering (above 0.0 for Buy; below for Sell).
- CCI_Period (Default: 50, Unit: bars) -> Lookback period in bars for the CCI zero-line trend filter.
- CCI_Applied (Default: PRICE_CLOSE, Unit: applied price) -> Candle price series applied to the CCI trend filter.
Filter 11: CCI Overbought and Oversold Filter (InpFilter11)
- Use_CCI_OBOS_Filter (Default: false, Unit: boolean) -> Enables or disables short-term CCI threshold breakout filtering.
- CCI_OBOS_Period (Default: 14, Unit: bars) -> Lookback period in bars for the short-term CCI threshold filter.
- CCI_OBOS_Applied (Default: PRICE_CLOSE, Unit: applied price) -> Candle price series applied to the short-term CCI threshold filter.
- CCI_Overbought (Default: 100.0, Unit: CCI points) -> Upper CCI threshold evaluated by the filter.
- CCI_Oversold (Default: -100.0, Unit: CCI points) -> Lower CCI threshold evaluated by the filter.
Filter 12: Relative Vigor Index (RVI) Filters (InpFilter12)
- Use_RVI_Filter (Default: false, Unit: boolean) -> Enables or disables long-period RVI zero-level directional trend filtering.
- RVI_Period (Default: 75, Unit: bars) -> Lookback period in bars for the RVI zero-line trend filter.
- Use_RVI_Signal_Filter (Default: false, Unit: boolean) -> Enables or disables RVI main-line versus signal-line crossover alignment filtering.
- RVI_Signal_Period (Default: 20, Unit: bars) -> Lookback period in bars for the RVI main and signal line comparison filter.
Filter 13: MACD Histogram and Zero Filters (InpFilter13)
- Use_MACD_Filter (Default: false, Unit: boolean) -> Enables or disables MACD histogram polarity filtering (main line above signal line for Buy; below for Sell).
- MACD_FastEMA (Default: 12, Unit: bars) -> Fast EMA period in bars for MACD calculation.
- MACD_SlowEMA (Default: 26, Unit: bars) -> Slow EMA period in bars for MACD calculation.
- MACD_SignalSMA (Default: 9, Unit: bars) -> Signal line SMA smoothing period in bars.
- MACD_Applied (Default: PRICE_CLOSE, Unit: applied price) -> Candle price series applied to MACD calculation.
- Use_MACD_Zero_Filter (Default: false, Unit: boolean) -> Enables or disables MACD main-line zero-level directional regime filtering.
Filter 14: Support/Resistance and Fibonacci Filters (InpFilter14)
- Use_SR_Filter (Default: false, Unit: boolean) -> Enables or disables local swing Support and Resistance proximity zone validation.
- SR_Period (Default: 50, Unit: bars) -> Historical lookback window in bars used to locate swing Support and Resistance levels.
- SR_Zone_Points (Default: 80, Unit: points) -> Proximity tolerance buffer in broker points around detected Support or Resistance levels.
- Use_Fib_Filter (Default: false, Unit: boolean) -> Enables or disables ZigZag-anchored Fibonacci retracement zone validation.
- Fib_Level_1 (Default: 0.382, Unit: ratio) -> First boundary ratio defining the active Fibonacci retracement zone.
- Fib_Level_2 (Default: 0.618, Unit: ratio) -> Second boundary ratio defining the active Fibonacci retracement zone.
- ZigZag_Depth (Default: 12, Unit: bars) -> Minimum bar depth used to identify swing highs and lows in Fibonacci anchoring.
- ZigZag_Deviation (Default: 5, Unit: points) -> Minimum price deviation in points between consecutive ZigZag swing extremes.
- ZigZag_Backstep (Default: 3, Unit: bars) -> Minimum bar separation between adjacent ZigZag swing points.
Filter 15: Supertrend Filter (InpFilter15)
- Use_Supertrend_Filter (Default: false, Unit: boolean) -> Enables or disables the Wilder ATR-based Supertrend directional regime filter.
- ST_AtrPeriod (Default: 10, Unit: bars) -> Wilder ATR smoothing period in bars used to compute Supertrend volatility bands.
- ST_Factor (Default: 3.0, Unit: multiplier) -> Multiplier applied to ATR to establish Supertrend upper and lower trailing band distances.
Risk Disclaimer
Trading foreign exchange, commodities, indices, and other leveraged financial instruments involves significant risk and may not be suitable for all investors. Past performance does not guarantee future results. This software is an analytical and operational tool designed to assist traders in technical analysis; it does not provide financial advice, does not guarantee profit, and does not prevent losses. Always thoroughly test the product on a MetaTrader 4 demo account to understand its operational behavior and filter interactions prior to deployment in live trading environments.
