Parabolic RSI Trend Reversal Signal Multi Filter

Parabolic RSI Trend Reversal Signal Multi Filter

Overview

Parabolic RSI Multi Filter is a technical analysis indicator for MetaTrader 4 (MT4) that operates in a dedicated oscillator subwindow while plotting confirmed directional arrows and dynamic ATR-based risk-reward reference levels on the main chart. Standard Relative Strength Index (RSI) readings often remain extended inside overbought or oversold zones during sustained trends, producing premature counter-trend entries when traders rely solely on static 30 and 70 threshold crosses. By applying Parabolic Stop and Reverse (SAR) directional tracking directly onto the RSI oscillator curve, this indicator identifies momentum inflection points within the oscillator itself. To refine signal selection across diverse market regimes, the software integrates an optional 15-module confirmation suite alongside an automated Average True Range (ATR) target engine that draws Entry, Stop Loss (SL), and three Take Profit levels (TP1, TP2, TP3) exclusively for the latest confirmed signal.
Operating Principle and Signal Logic
The analytical architecture combines four coordinated modules: a Relative Strength Index (RSI) oscillator calculation, a Parabolic SAR state engine applied to RSI values, a modular 15-filter trend and price-structure confirmation framework, and an ATR volatility target calculator. All signal evaluations occur strictly upon candle closure (Bar 1). Because directional crossovers and filter checks are evaluated only after a candle completes and locks its final OHLC data, confirmed arrows on the main chart and historical Parabolic SAR dots in the subwindow are non-repainting and remain fixed on the chart.
Bullish Signal (Buy) Conditions:
- On a completed candle (Bar 1), the RSI curve crosses above the active bearish Parabolic SAR dot level, transitioning the oscillator SAR regime from bearish to bullish.
- Every enabled module in the optional 15-filter confirmation suite must simultaneously satisfy its bullish alignment rule on that same closed candle (macro trend direction, momentum polarity, oscillator bias, or structural support proximity).
- Upon full bar-close confirmation, an upward Buy arrow appears below the signal candle low, the active ATR target overlay updates to the new bullish setup, and enabled terminal or mobile alerts fire once per closed bar.
Bearish Signal (Sell) Conditions:
- On a completed candle (Bar 1), the RSI curve crosses below the active bullish Parabolic SAR dot level, transitioning the oscillator SAR regime from bullish to bearish.
- Every enabled module in the optional 15-filter confirmation suite must simultaneously satisfy its bearish alignment rule on that same closed candle (bearish trend regime, negative momentum slope, oscillator bias, or structural resistance proximity).
- Upon full bar-close confirmation, a downward Sell arrow appears above the signal candle high, the active ATR target overlay updates to the new bearish setup, and enabled terminal or mobile alerts fire once per closed bar.
Signal Reversal and Target Management Logic:
- This product operates strictly as an analytical indicator and does not open, modify, or close live or pending trading orders automatically.
- Active Entry, SL, TP1 (1R), TP2 (2R), and TP3 (3R) horizontal reference lines remain displayed on the chart until a subsequent opposing Buy or Sell signal confirms on a closed bar, shifting the target overlay to the newest setup.
- Traders can reference opposing Parabolic RSI reversals or the plotted 1R, 2R, and 3R ATR targets as structured levels for partial profit-taking, stop placement, and discretionary trade management.
Key Technical Features
- Hybrid Oscillator Tracking Engine: Applies Parabolic SAR acceleration and reversal tracking directly onto the RSI curve rather than raw price candles, highlighting momentum shifts inside the subwindow.
- Non-Repainting Bar-Close Execution: Evaluates all signal conditions strictly on closed candles (shift 1 and higher), ensuring historical arrows and subwindow SAR dots do not shift, recalculate backward, or disappear.
- Modular 15-Filter Confirmation Framework: Incorporates 15 independent technical filters covering RSI threshold crosses, ADX trend strength, Single MA, Ichimoku Senkou Span B, Long-Period RSI bias, Double MA crossover, Awesome Oscillator (amplitude, slope, and zero-line modes), Price Parabolic SAR, Heiken Ashi candle polarity, CCI trend, CCI overbought/oversold breakouts, RVI zero and signal-line alignment, MACD histogram and zero-line polarity, swing Support/Resistance with ZigZag Fibonacci retracement zones, and Wilder ATR Supertrend.
- Dynamic ATR Risk-Reward Target Overlay: Computes the 1R Stop Loss risk distance from the signal candle ATR multiplied by a user-defined factor, automatically plotting Entry, SL, TP1 (1:1 RR), TP2 (2:1 RR), and TP3 (3:1 RR) lines and price labels exclusively for the latest signal to preserve chart readability.
- Incremental Tick State Continuation: Stores a persistent Parabolic SAR state snapshot at closed bars so incoming ticks update only the active chart edge without full-history recalculation.
- Four-Channel Alert Dispatcher: Delivers MT4 desktop pop-up alerts, separate Buy and Sell .wav audio alerts, MetaTrader mobile push notifications via MetaQuotes ID, and SMTP email notifications with duplicate-alert protection per bar timestamp.
- Automatic Chart Object Cleanup: Removes all indicator-generated arrows, horizontal target lines, and price labels cleanly when detached or reinitialized.
Filter Configuration Profiles and Practical Workflow
- Trend-Continuation Setup: Combine the core Parabolic RSI signal with Filter 2 (ADX Trend Strength), Filter 3 (Single MA) or Filter 6 (Double MA), and Filter 15 (Supertrend) to restrict signals to established trends while filtering out low-volatility consolidation ranges.
- Pullback and Structure Setup: Enable Filter 14 (Support/Resistance and ZigZag Fibonacci Retracement) alongside Filter 9 (Heiken Ashi) or Filter 13 (MACD) to isolate Parabolic RSI momentum reversals occurring near swing zones or key Fibonacci retracement bands.
- Momentum Confluence Setup: Pair the primary oscillator reversal with Filter 5 (Long-Period RSI 75 Bias), Filter 10 (CCI Trend), or Filter 12 (RVI Trend and Signal) to align short-term oscillator inflections with broader momentum polarity.
- Step-by-Step Chart Deployment: Open the target instrument and timeframe in MT4, attach Parabolic RSI Multi Filter from the Navigator panel, configure core RSI/SAR sensitivity and ATR multiplier in Section 1 and Section 2, activate desired filters (all 15 filters default to false for selective customization), and verify terminal notification settings under Tools -> Options prior to live monitoring.
Graphical Interface and Alert System
Subwindow Visual Elements:
- DodgerBlue Solid Line (Width 2): Displays the calculated RSI oscillator line inside the separate subwindow, bounded by dotted reference levels at 30.0 and 70.0.
- Lime Dots (Bullish Parabolic SAR): Plotted beneath the RSI line whenever the oscillator momentum state is bullish.
- Red Dots (Bearish Parabolic SAR): Plotted above the RSI line whenever the oscillator momentum state is bearish.
Main Chart Visual Elements:
- Aqua Upward Arrow: Plotted beneath the signal candle low to mark a confirmed bullish Buy signal.
- Red Downward Arrow: Plotted above the signal candle high to mark a confirmed bearish Sell signal.
- Gold Solid Line (Entry): Displays the closing reference price of the most recent confirmed signal candle.
- Red Dashed Line (SL): Displays the ATR-based Stop Loss reference level at 1.0x risk distance from Entry.
- LimeGreen, MediumSeaGreen, and DodgerBlue Dashed Lines (TP1, TP2, TP3): Display progressive Take Profit targets at 1R, 2R, and 3R multiples of risk distance with right-aligned price labels.
Notification Mechanisms:
- Desktop Pop-Up Alert: Opens an immediate MT4 terminal alert window containing signal direction (BUY or SELL), symbol, timeframe, Entry, SL, TP1, TP2, and TP3 values.
- Audible Sound Alert: Plays distinct user-configured .wav audio files located in the MetaTrader Sounds directory for Buy and Sell events.
- Mobile Push Notification: Sends formatted signal parameters directly to iOS or Android MetaTrader mobile apps linked via MetaQuotes ID.
- Email Alert: Transmits formatted signal alerts through the terminal SMTP email configuration.
Operational Recommendations and Performance Notes
- Supported Instruments: Suitable for liquid Forex major and cross pairs (EURUSD, GBPUSD, USDJPY, AUDUSD, USDCAD, EURJPY), spot metals (XAUUSD), and major equity index CFDs; compare broker spread and commission costs against the plotted 1R ATR Stop Loss distance prior to live trading.
- Recommended Timeframes: Adaptable across multiple trading horizons, including M5 and M15 for intraday momentum setups, M30 and H1 for structured day trading, and H4 or D1 for swing trend-reversal evaluation.
- Account and Execution Environment: Compatible with both Hedging and Netting MT4 account structures across standard or ECN/Raw spread feeds; candle-close confirmation avoids sensitivity to sub-second tick latency, though stable broker feeds ensure consistent ATR and filter readings.
- CPU and Memory Efficiency: Requires at least 100 historical bars on the chart to initialize all filter buffers and uses incremental bar calculation to keep routine CPU usage low. However, enabling multiple computationally intensive modules simultaneously (Support/Resistance scans, ZigZag Fibonacci detection, Supertrend) across numerous open charts increases RAM and CPU load, so limit simultaneous chart instances on modest hardware.
Input Parameters Documentation
All parameters below appear in the MetaTrader 4 Inputs tab. Strings InpSection1 to InpSection3 and InpFilter1 to InpFilter15 act as visual section headers in the settings window.
Section 1: Entry Logic and Parabolic RSI Settings (InpSection1)
- InpRSIPeriod (Default: 14, Unit: bars) -> Lookback period in bars for the primary RSI curve in the subwindow; lower values increase sensitivity while higher values smooth noise.
- InpSARStep (Default: 0.02, Unit: step) -> Initial acceleration factor and increment added when RSI sets a new directional extreme.
- InpSARMaximum (Default: 0.20, Unit: cap) -> Maximum upper limit for the Parabolic SAR acceleration factor during extended RSI swings.
- ColorBull (Default: clrLime, Unit: color) -> Color of bullish Parabolic SAR dots plotted beneath the RSI line in the subwindow.
- ColorBear (Default: clrRed, Unit: color) -> Color of bearish Parabolic SAR dots plotted above the RSI line in the subwindow.
- ShowArrows (Default: true, Unit: bool) -> Enables or disables Buy and Sell signal arrows on the main price chart.
- BuyArrowColor (Default: clrAqua, Unit: color) -> Color of upward Buy arrows drawn below bullish signal candles.
- SellArrowColor (Default: clrRed, Unit: color) -> Color of downward Sell arrows drawn above bearish signal candles.
- ArrowSize (Default: 2, Unit: size 1-5) -> Visual size and thickness index of Buy and Sell arrows on the chart.
Section 2: ATR and Target Levels SL/TP Settings (InpSection2)
- InpShowSLTP (Default: true, Unit: bool) -> Enables or disables Entry, SL, TP1, TP2, and TP3 lines and labels for the latest confirmed signal.
- InpATRPeriod (Default: 7, Unit: bars) -> Lookback period in bars used to compute the ATR volatility baseline at signal close.
- InpATRMultiplier (Default: 1.5, Unit: multiplier) -> Multiplier applied to signal-bar ATR to define the 1R Stop Loss risk distance from Entry.
- InpLineExtendBars (Default: 1, Unit: bars) -> Number of bars extending active target lines and labels right of bar 0.
- InpFontSize (Default: 8, Unit: pt) -> Text font size applied to Entry, SL, TP1, TP2, and TP3 price and risk-multiple labels.
- InpColorEntry (Default: clrGold, Unit: color) -> Line and label color for the confirmed signal Entry price.
- InpColorSL (Default: clrRed, Unit: color) -> Line and label color for the ATR-calculated Stop Loss level.
- InpColorTP1 (Default: clrLimeGreen, Unit: color) -> Line and label color for Take Profit 1 at 1.0x risk distance (1R).
- InpColorTP2 (Default: clrMediumSeaGreen, Unit: color) -> Line and label color for Take Profit 2 at 2.0x risk distance (2R).
- InpColorTP3 (Default: clrDodgerBlue, Unit: color) -> Line and label color for Take Profit 3 at 3.0x risk distance (3R).
- InpTargetLineStyle (Default: STYLE_DASH, Unit: line style) -> Drawing style (solid, dash, dot, dash-dot) applied to SL, TP1, TP2, and TP3 lines.
- InpLineWidth (Default: 1, Unit: pixels) -> Line thickness in pixels for Entry, Stop Loss, and Take Profit horizontal lines.
Section 3: Notifications and Alerts Settings (InpSection3)
- Enable_Popup_Alert (Default: true, Unit: boolean) -> Enables or disables MT4 desktop pop-up alert dialogs on confirmed signals.
- Enable_Sound_Alert (Default: true, Unit: boolean) -> Enables or disables local .wav audio playback when a confirmed signal triggers.
- Sound_Buy (Default: "ok.wav", Unit: filename) -> Audio file in the MetaTrader Sounds folder played upon a Buy signal.
- Sound_Sell (Default: "timeout.wav", Unit: filename) -> Audio file in the MetaTrader Sounds folder played upon a Sell signal.
- Enable_Push_Notif (Default: true, Unit: boolean) -> Enables or disables mobile push notifications via MetaQuotes ID.
- Enable_Email_Alert (Default: false, Unit: boolean) -> Enables or disables SMTP email signal alerts via terminal mail settings.
Filter 1: RSI Cross Filter (InpFilter1)
- Use_RSI_Cross_Filter (Default: false, Unit: boolean) -> Enables or disables secondary RSI threshold-crossing confirmation on the signal candle.
- RSI_Length (Default: 14, Unit: bars) -> Calculation period in bars for the secondary RSI threshold-crossing filter.
- RSI_Price_Source (Default: PRICE_CLOSE, Unit: applied price) -> Candle price series (Close, Open, High, Low, Median, Typical, Weighted) for RSI filtering.
- RSI_Oversold (Default: 30.0, Unit: RSI points) -> Lower threshold that filter RSI must cross above from below to validate Buy signals.
- RSI_Overbought (Default: 70.0, Unit: RSI points) -> Upper threshold that filter RSI must cross below from above to validate Sell signals.
Filter 2: ADX Trend Strength Filter (InpFilter2)
- Use_ADX_Filter (Default: false, Unit: boolean) -> Enables or disables Average Directional Index (ADX) trend-strength filtering.
- ADX_Period (Default: 10, Unit: bars) -> Averaging period in bars used to compute the main ADX line.
- ADX_Min_Level (Default: 20.0, Unit: ADX points) -> Minimum ADX reading at signal close required to permit signals and exclude flat markets.
Filter 3: Single Moving Average Filter (InpFilter3)
- Use_MA_Filter (Default: false, Unit: boolean) -> Enables or disables single MA directional trend filtering (close above MA for Buy; below for Sell).
- MA_Period (Default: 50, Unit: bars) -> Averaging period in bars for the single MA trend baseline.
- MA_Method (Default: MODE_SMA, Unit: MA method) -> Smoothing algorithm (SMA, EMA, SMMA, LWMA) applied to the single MA filter.
- MA_Shift (Default: 0, Unit: bars) -> Horizontal bar shift offset applied to the single MA series.
Filter 4: Ichimoku Senkou Span B Filter (InpFilter4)
- Use_Ichimoku_Filter (Default: false, Unit: boolean) -> Enables or disables Ichimoku Kinko Hyo Senkou Span B cloud boundary filtering.
- Ichimoku_Tenkan (Default: 9, Unit: bars) -> Conversion line (Tenkan-sen) calculation period in bars.
- Ichimoku_Kijun (Default: 26, Unit: bars) -> Base line (Kijun-sen) calculation period in bars.
- Ichimoku_SenkouB (Default: 52, Unit: bars) -> Leading Span B period in bars; Buy requires candle close above Senkou Span B, Sell requires close below.
Filter 5: Long-Period RSI Bias Filter (InpFilter5)
- Use_RSI75_Filter (Default: false, Unit: boolean) -> Enables or disables long-period RSI 50.0 midpoint directional bias filtering.
- RSI_Filter_Period (Default: 75, Unit: bars) -> Lookback period in bars for macro RSI trend filtering (above 50.0 for Buy; below 50.0 for Sell).
Filter 6: Double Moving Average Filter (InpFilter6)
- Use_DoubleMA_Filter (Default: false, Unit: boolean) -> Enables or disables dual MA regime alignment (fast MA A above slow MA B for Buy; below for Sell).
- MA_A_Period (Default: 30, Unit: bars) -> Lookback period in bars for fast Moving Average MA A.
- MA_A_Method (Default: MODE_EMA, Unit: MA method) -> Smoothing method (SMA, EMA, SMMA, LWMA) applied to MA A.
- MA_A_Applied (Default: PRICE_CLOSE, Unit: applied price) -> Candle price series applied to MA A.
- MA_A_Shift (Default: 0, Unit: bars) -> Horizontal bar shift offset for MA A.
- MA_B_Period (Default: 140, Unit: bars) -> Lookback period in bars for slow Moving Average MA B.
- MA_B_Method (Default: MODE_EMA, Unit: MA method) -> Smoothing method (SMA, EMA, SMMA, LWMA) applied to MA B.
- MA_B_Applied (Default: PRICE_CLOSE, Unit: applied price) -> Candle price series applied to MA B.
- MA_B_Shift (Default: 0, Unit: bars) -> Horizontal bar shift offset for MA B.
Filter 7: Awesome Oscillator Filter (InpFilter7)
- Use_AO_Filter (Default: false, Unit: boolean) -> Primary toggle enabling or disabling Awesome Oscillator (AO) momentum sub-filters.
- Use_AO_Volume_Filter (Default: false, Unit: boolean) -> Enables or disables minimum AO histogram amplitude threshold checks.
- AO_Buy_Min (Default: 4.0, Unit: AO value) -> Minimum positive AO reading required for Buy signals when amplitude filtering is active.
- AO_Sell_Max (Default: -4.0, Unit: AO value) -> Maximum negative AO reading required for Sell signals when amplitude filtering is active.
- Use_AO_Color_Filter (Default: false, Unit: boolean) -> Enables or disables bar-over-bar AO histogram slope checks (rising for Buy; falling for Sell).
- Use_AO_Zero_Filter (Default: false, Unit: boolean) -> Enables or disables AO zero-line alignment combined with directional bar slope.
Filter 8: Price Parabolic SAR Filter (InpFilter8)
- Use_SAR_Filter (Default: false, Unit: boolean) -> Enables or disables price-chart Parabolic SAR filtering (close above SAR for Buy; below for Sell).
- SAR_Step (Default: 0.02, Unit: step) -> Acceleration factor step increment for the price-based Parabolic SAR filter.
- SAR_Maximum (Default: 0.2, Unit: cap) -> Maximum acceleration limit for the price-based Parabolic SAR filter.
Filter 9: Heiken Ashi Filter (Header: InpFilter9)
- Use_HeikenAshi_Filter (Default: false, Unit: boolean) -> Enables or disables smoothed Heiken Ashi candle body polarity filtering (bullish body for Buy; bearish for Sell).
Filter 10: CCI Trend Filter (InpFilter10)
- Use_CCI_Filter (Default: false, Unit: boolean) -> Enables or disables Commodity Channel Index (CCI) zero-line trend filtering (above 0.0 for Buy; below for Sell).
- CCI_Period (Default: 50, Unit: bars) -> Lookback period in bars for the CCI zero-line trend filter.
- CCI_Applied (Default: PRICE_CLOSE, Unit: applied price) -> Candle price series applied to the CCI trend filter.
Filter 11: CCI Overbought and Oversold Filter (InpFilter11)
- Use_CCI_OBOS_Filter (Default: false, Unit: boolean) -> Enables or disables short-term CCI threshold breakout filtering.
- CCI_OBOS_Period (Default: 14, Unit: bars) -> Lookback period in bars for the short-term CCI threshold filter.
- CCI_OBOS_Applied (Default: PRICE_CLOSE, Unit: applied price) -> Candle price series applied to the short-term CCI threshold filter.
- CCI_Overbought (Default: 100.0, Unit: CCI points) -> Upper CCI threshold evaluated by the filter.
- CCI_Oversold (Default: -100.0, Unit: CCI points) -> Lower CCI threshold evaluated by the filter.
Filter 12: Relative Vigor Index (RVI) Filters (InpFilter12)
- Use_RVI_Filter (Default: false, Unit: boolean) -> Enables or disables long-period RVI zero-level directional trend filtering.
- RVI_Period (Default: 75, Unit: bars) -> Lookback period in bars for the RVI zero-line trend filter.
- Use_RVI_Signal_Filter (Default: false, Unit: boolean) -> Enables or disables RVI main-line versus signal-line crossover alignment filtering.
- RVI_Signal_Period (Default: 20, Unit: bars) -> Lookback period in bars for the RVI main and signal line comparison filter.
Filter 13: MACD Histogram and Zero Filters (InpFilter13)
- Use_MACD_Filter (Default: false, Unit: boolean) -> Enables or disables MACD histogram polarity filtering (main line above signal line for Buy; below for Sell).
- MACD_FastEMA (Default: 12, Unit: bars) -> Fast EMA period in bars for MACD calculation.
- MACD_SlowEMA (Default: 26, Unit: bars) -> Slow EMA period in bars for MACD calculation.
- MACD_SignalSMA (Default: 9, Unit: bars) -> Signal line SMA smoothing period in bars.
- MACD_Applied (Default: PRICE_CLOSE, Unit: applied price) -> Candle price series applied to MACD calculation.
- Use_MACD_Zero_Filter (Default: false, Unit: boolean) -> Enables or disables MACD main-line zero-level directional regime filtering.
Filter 14: Support/Resistance and Fibonacci Filters (InpFilter14)
- Use_SR_Filter (Default: false, Unit: boolean) -> Enables or disables local swing Support and Resistance proximity zone validation.
- SR_Period (Default: 50, Unit: bars) -> Historical lookback window in bars used to locate swing Support and Resistance levels.
- SR_Zone_Points (Default: 80, Unit: points) -> Proximity tolerance buffer in broker points around detected Support or Resistance levels.
- Use_Fib_Filter (Default: false, Unit: boolean) -> Enables or disables ZigZag-anchored Fibonacci retracement zone validation.
- Fib_Level_1 (Default: 0.382, Unit: ratio) -> First boundary ratio defining the active Fibonacci retracement zone.
- Fib_Level_2 (Default: 0.618, Unit: ratio) -> Second boundary ratio defining the active Fibonacci retracement zone.
- ZigZag_Depth (Default: 12, Unit: bars) -> Minimum bar depth used to identify swing highs and lows in Fibonacci anchoring.
- ZigZag_Deviation (Default: 5, Unit: points) -> Minimum price deviation in points between consecutive ZigZag swing extremes.
- ZigZag_Backstep (Default: 3, Unit: bars) -> Minimum bar separation between adjacent ZigZag swing points.
Filter 15: Supertrend Filter (InpFilter15)
- Use_Supertrend_Filter (Default: false, Unit: boolean) -> Enables or disables the Wilder ATR-based Supertrend directional regime filter.
- ST_AtrPeriod (Default: 10, Unit: bars) -> Wilder ATR smoothing period in bars used to compute Supertrend volatility bands.
- ST_Factor (Default: 3.0, Unit: multiplier) -> Multiplier applied to ATR to establish Supertrend upper and lower trailing band distances.
Risk Disclaimer
Trading foreign exchange, commodities, indices, and other leveraged financial instruments involves significant risk and may not be suitable for all investors. Past performance does not guarantee future results. This software is an analytical and operational tool designed to assist traders in technical analysis; it does not provide financial advice, does not guarantee profit, and does not prevent losses. Always thoroughly test the product on a MetaTrader 4 demo account to understand its operational behavior and filter interactions prior to deployment in live trading environments.
Altri dall’autore
Overview MACD Signal with Multi Filters is an advanced technical analysis indicator engineered for MetaTrader 5 (MT5). The software combines the classic Moving Average Convergence Divergence (MACD) oscillator architecture with a modular 14-filter confirmation engine (MultiFilterSuite). It is developed to assist manual traders, quantitative analysts, and algorithmic system developers in identifying momentum shifts, trend continuations, and structural turning points while filtering out sideways ma
Parabolic SAR Multi-Filter System MT5: Algorithmic Trend Reversal Engine 1. PRODUCT OVERVIEW & OPERATIONAL ARCHITECTURE Parabolic SAR Multi-Filter System MT5 is a professional multi-component technical analysis indicator engineered for the MetaTrader 5 terminal. The indicator combines J. Welles Wilder's classic Parabolic Time/Price System with an advanced modular filtering architecture comprising 17 distinct secondary validation engines. The primary objective of this software is to eliminate f
Hull Trend Arrows MT5 with Multi-Filter Suite - Technical Documentation 1. Overview and Analytical Purpose Hull Trend Arrows MT5 with Multi-Filter Suite is an algorithmic technical indicator for MetaTrader 5. It integrates the low-lag calculation engine of the Hull Moving Average (HMA) with fourteen modular confirmation filters to identify directional momentum transitions, calculate inflection points, and display non-repainting entry signals on the chart. Standard moving averages introduce sign
FREE
HA Signal MultiFilter MT5 - Technical Operational Manual & Architecture Guide 1. SYSTEM OVERVIEW & ARCHITECTURAL FOUNDATION HA Signal MultiFilter MT5 is a specialized analytical indicator developed for MetaTrader 5 terminal to identify directional momentum expansions and structural trend continuations[cite: 2]. By synthesizing smoothed Heiken Ashi candlestick price discovery with a modular 15-layer secondary confirmation filter suite, the system extracts high-probability market shifts while fil
FREE
Product Overview: Relative Vigor Index Multi-Filter Technical System The Relative Vigor Index (RVI) Multi-Filter Indicator is a comprehensive technical analysis engine developed for the MetaTrader 5 terminal. Designed to identify cyclical momentum shifts, trend continuations, and structural market turning points, this analytical system couples the classic Relative Vigor Index formula with an advanced multi-layered confirmation matrix consisting of 17 distinct technical filters. Rather than rely
FREE
1. OVERVIEW Harmonic Dashboard is a specialized multi-symbol and multi-timeframe analytical indicator designed for MetaTrader 5 (MT5). The software systematically scans financial instruments across multiple timeframes to identify six classical harmonic chart patterns: Gartley, Bat, Butterfly, Crab, Cypher, and Shark. The application consolidates multi-asset scanner results, trend filter validation metrics, price level projections, and interactive chart navigation controls into a single graphic
Overview The MA Cross Scanner Pro is an advanced, highly optimized multi-symbol and multi-timeframe analytical dashboard engineered specifically for the MetaTrader 5 terminal. Designed for technical analysts, systemic traders, and quantitative researchers, this utility serves as a comprehensive market surveillance engine. Its primary objective is to continuously monitor a customized array of financial instruments across numerous timeframes simultaneously, detecting precise moving average crosso
CCI MultiFilter Overbought Oversold Signal Pro MT5 Technical Specification & Operational Manual  1. Overview and System Identity CCI MultiFilter Overbought Oversold Signal Pro MT5 is an institutional-grade technical analysis indicator engineered natively for MetaTrader 5. Developed for quantitative analysts, systematic manual traders, and multi-asset operators, the system provides an objective algorithmic framework to identify cyclical market extremes, momentum shifts, and structural trend cont
WPR Williams Percent Range All Pair Timeframe Scanner Dashboard Overview WPR Scanner Dashboard Pro is a multi-symbol, multi-timeframe market scanning indicator and visual chart overlay utility built for MetaTrader 4 (MT4). The tool monitors Williams Percent Range (WPR) momentum exhaustion and threshold breakouts across multiple currency pairs, metals, indices, and CFDs simultaneously from a single chart window. In addition to its core WPR detection engine, the indicator incorporates an optiona
WAE Waddah Attar Explosion Multi Pair TimeFrame Scanner 1. Overview - WAE Scanner Dashboard is a technical analysis indicator and multi-symbol, multi-timeframe market scanner built for MetaTrader 4 (MT4). - It automates multi-chart monitoring by scanning volatility-driven momentum breakouts based on the Waddah Attar Explosion (WAE) methodology across multiple currency pairs, crosses, indices, or metals simultaneously. - Candidate signals are processed through a modular 15-filter technical conf
UT Bot Trend Multi Pair Timeframe Scan Dashboard Overview UT Bot Scanner Dashboard is a multi-pair and multi-timeframe technical indicator and market scanner developed natively for MetaTrader 4 (MT4). It continuously monitors selected Forex pairs, precious metals, indices, or active Market Watch symbols across multiple timeframes simultaneously to detect dynamic Average True Range (ATR) volatility trailing stop crossovers. Instead of manually cycling through dozens of individual charts to monit
TDI Traders Dynamic Index RSI Scanner All Pair TF Overview TDI & RSI Dynamic Line Dashboard Scanner is a multi-symbol and multi-timeframe analytical indicator designed for MetaTrader 4. The tool monitors multiple currency pairs, commodities, or indices across selected chart timeframes simultaneously to detect crossover events derived from the Traders Dynamic Index (TDI) and dual Relative Strength Index (RSI) Dynamic Lines. Every detected signal is evaluated against an optional 15-module technica
Stochastic Scanner Dashboard for MetaTrader 4 Stochastic Overbought Oversold Scanner Dashboard All Pair Time frame Overview - Stochastic Scanner Dashboard is a multi-symbol and multi-timeframe technical analysis indicator and market scanner built for MetaTrader 4 (MT4). - The tool continuously monitors user-defined currency pairs, metals, or Market Watch symbols across multiple timeframes from one chart. - It detects momentum shifts using configurable Stochastic Oscillator strategies and valida
SSL Channel Trend Scanner Dashboard Multi Pair Multi TimeFrame Overview SSL Channel Multi-Filter Dashboard is a technical analysis indicator and multi-symbol, multi-timeframe market scanner built for MetaTrader 4. It continuously monitors multiple currency pairs, commodities, or other broker instruments across user-selected timeframes to detect directional channel crossovers confirmed by an optional 15-module technical filter suite. Validated signals are organized in an interactive on-chart dash
Relative Vigor Index RVI All Pair and Timeframe Scanner Dashboard Overview RVI Scanner Dashboard is a multi-pair and multi-timeframe technical indicator and interactive scanner panel for MetaTrader 4 (MT4). Built around the Relative Vigor Index (RVI) oscillator, it continuously monitors multiple currency pairs, commodities, or indices across selected timeframes from one chart window. The tool detects directional momentum crossovers, validates setups through an optional 15-module technical conf
RSI Parabolic Overbought Oversold Multi pair Timeframe Scanner 1. Overview - RSI Parabolic Scanner Dashboard is a multi-symbol, multi-timeframe technical analysis indicator and real-time market scanner engineered for MetaTrader 4 (MT4). - It continuously monitors user-defined currency pairs, metals, or visible Market Watch instruments across multiple chart timeframes to identify momentum reversals and overbought or oversold market conditions. - The indicator combines two selectable RSI-based si
RSI Divergence Multi Pair Timeframe Scan Dashboard Overview - Product Type: Multi-symbol, multi-timeframe technical analysis indicator and interactive market dashboard scanner for MetaTrader 4 (MT4). - Core Purpose: Continuously monitors configured currency pairs, precious metals, indices, or active Market Watch symbols across multiple chart timeframes simultaneously to identify Regular and Hidden Relative Strength Index (RSI) divergence setups in one unified terminal window. - Structured Trade
Overview - Product Identity: Pola MultiCandle Scanner Dashboard is a multi-pair and multi-timeframe technical analysis indicator and market scanner developed for MetaTrader 4 (MT4). - Core Purpose: Continuously monitors user-defined currency pairs, precious metals, or Market Watch instruments across multiple timeframes to detect structured multi-candle price action formations, validate setups through a modular 15-indicator confluence suite, calculate volatility-adjusted Stop Loss (SL) and dual
MACD Signal Trend Cross Scanner All Pair Dashboard Overview MACD Scanner Dashboard is a technical analysis utility and multi-symbol, multi-timeframe dashboard indicator designed for MetaTrader 4[cite: 1]. Its primary objective is to monitor MACD crossover events across multiple currency pairs and chart timeframes simultaneously from a single active chart window[cite: 1]. Instead of manually switching between dozens of charts, traders can observe real-time market momentum, directional bias, calc
MA Moving Average Cross Scanner All Pair Timeframe Dashboard Overview MA Cross Scanner is an analytical multi-symbol and multi-timeframe technical indicator equipped with an interactive on-chart dashboard panel for MetaTrader 4[cite: 1]. The tool is engineered to monitor Moving Average (MA) crossover events across multiple currency pairs and timeframes simultaneously, consolidating signal detection, modular trend/momentum filtering, and Average True Range (ATR) risk-reward level calculations in
Ichimoku Tenkan Kijun Cross Scanner All Pair TimeFrame Overview TK Cross Scanner Dashboard is a technical analysis indicator and multi-asset market scanner engineered for the MetaTrader 4 platform. The utility monitors multiple currency pairs, commodities, and timeframes simultaneously to detect Ichimoku Tenkan-sen and Kijun-sen crossovers (TK Cross). In addition to automated signal scanning, the software calculates dynamic Stop Loss (SL) and dual Take Profit (TP1 and TP2) reference levels usin
Ichimoku Senkou Span B Scanner All Pair Timeframe Overview Senkou Span B Scanner Dashboard MT4 is a technical analysis indicator and multi-asset market scanner designed for MetaTrader 4. The tool monitors multiple currency pairs, commodities, and timeframes simultaneously from a single chart window to detect price interactions with the Ichimoku Kinko Hyo Senkou Span B boundary. In addition to scanning for signal candidates, the indicator integrates a 15-module secondary confirmation suite, calc
Heiken Ashi Multi Currency Pair Time Frame Scan Dashboard Overview Heiken Ashi Multi Timeframe Scanner Dashboard is a technical analysis utility and multi-symbol, multi-timeframe market scanner developed for the MetaTrader 4 platform. The tool is designed to monitor multiple currency pairs, commodities, or indices simultaneously from a single chart window. Instead of manually switching between dozens of charts and timeframes to inspect Heiken Ashi candle formations, traders can view active dire
Pro Harmonic Pattern Scanner All Pair Time Frame Dashboard Harmonic Pattern Scanner Dashboard MT4 is an analytical multi-symbol and multi-timeframe technical indicator designed for MetaTrader 4. It automatically scans price action across selected currency pairs, metals, or Market Watch instruments to identify classic XABCD harmonic structures, calculate Fibonacci-based entry, Stop Loss, and Take Profit zones, and validate setups through an integrated modular trend and momentum filter suite. Op
Fractal Breakout Scanner Multi Pair Timeframe Dashboard Overview Fractal Breakout Scanner Dashboard is a technical analysis indicator and multi-symbol, multi-timeframe scanning utility designed for MetaTrader 4. The tool monitors multiple currency pairs, commodities, and indices simultaneously to detect price breakouts beyond confirmed Bill Williams Fractal swing highs and swing lows. Rather than requiring manual chart switching across dozens of instruments, the indicator aggregates real-time b
Institutional Candle Price Engulfing Scan All Pair Timeframe Engulfing Scanner Dashboard is a technical analysis utility and multi-symbol, multi-timeframe candlestick pattern scanner for MetaTrader 4. It detects Bullish Engulfing and Bearish Engulfing setups across multiple currency pairs and timeframes simultaneously, displaying active signals in an interactive on-chart table alongside ATR-based Stop Loss and Take Profit reference levels. 1. Overview and Technical Purpose - Product Category:
Pinbar Marubozu Rejection Candlestick Scanner All Pair Timeframe Overview Candle Pattern Scanner Dashboard is a technical analysis utility and multi-pair, multi-timeframe scanner indicator designed for MetaTrader 4. The indicator continuously monitors multiple currency pairs, commodities, or indices across selected timeframes to detect specific Japanese candlestick price action formations—namely Candle Rejection, Full-Body Marubozu, and Classic Pin Bar structures. When a valid candlestick forma
Chaikin Oscillator Scanner All Pair Timeframe Dashboard Overview Chaikin Oscillator Scanner Dashboard is a technical analysis utility and multi-symbol, multi-timeframe market scanner designed for MetaTrader 4 (MT4)[cite: 1]. The indicator monitors multiple currency pairs, commodities, or indices simultaneously across selected chart timeframes to identify Chaikin Oscillator zero-line crossover events[cite: 1]. Detected setups are presented in an interactive on-chart table complete with automated
CCI Signal Trend Overbought Oversold Scanner All Pair TimeFrame Dashboard CCI Multi Timeframe Scanner Dashboard is a technical analysis utility and multi-symbol market scanner developed for MetaTrader 4. The indicator monitors multiple currency pairs and timeframes simultaneously using Commodity Channel Index (CCI) calculations combined with an optional multi-indicator confirmation suite and Average True Range (ATR) volatility projections. 1. Operating Principle and Signal Validity - Core Cal
BB Bollinger Bands Breakout Scanner All Pair Time Frame Bollinger Bands Breakout Scanner Dashboard is a technical analysis utility and multi-symbol, multi-timeframe market scanner engineered for MetaTrader 4 (MT4). The software continuously monitors multiple currency pairs, commodities, or indices across user-defined timeframes to detect confirmed Bollinger Bands breakout setups. Every detected signal is evaluated through an optional modular confirmation suite and automatically paired with vola
Filtro:
Nessuna recensione
Rispondi alla recensione