T-G: Now the trades are half as long as they were before
Instead of checking for a new bar, just pause between openings, set in seconds:
//+----------------------------------------------------------------------------+//| Автор : Ким Игорь В. aka KimIV, http://www.kimiv.ru |//+----------------------------------------------------------------------------+//| Версия : 19.02.2008 |//| Описание : Возвращает количество секунд после открытия последней позиций. |//+----------------------------------------------------------------------------+//| Параметры: |//| sy - наименование инструмента ("" - любой символ, |//| NULL - текущий символ) |//| op - операция (-1 - любая позиция) |//| mn - MagicNumber (-1 - любой магик) |//+----------------------------------------------------------------------------+datetime SecondsAfterOpenLastPos(string sy="", int op=-1, int mn=-1) {
datetime t;
int i, k=OrdersTotal();
if (sy=="0") sy=Symbol();
for (i=0; i<k; i++) {
if (OrderSelect(i, SELECT_BY_POS, MODE_TRADES)) {
if (OrderSymbol()==sy || sy=="") {
if (OrderType()==OP_BUY || OrderType()==OP_SELL) {
if (op<0 || OrderType()==op) {
if (mn<0 || OrderMagicNumber()==mn) {
if (t<OrderOpenTime()) t=OrderOpenTime();
}
}
}
}
}
}
return(TimeCurrent()-t);
}
I check it this way (in bold, ignore /*PauseMain*/ - it's a random value of delay in minutes - from 5 to 9):
// Тут начало функции открытия позиций (открытие Buy)....
// Ниже код открытия Sell:
PauseMain51=random(5,9)*60;
if (!Lot()) return;// Средств не хватает на миним.- выходимif (!OpnSell51 || !Trade) return;
if (ExistPositions(NULL, OP_SELL, 51, 0)) // Если есть такой же открытый Sell
{
if (SecondsAfterOpenLastPos(NULL, OP_SELL, 51)<=/* PauseMain51*/ 7*60) return; (7*60 сек = 7 минут)
// Если прошло мало времени - валим
}
//---------------------- Позиции ещё нету - открываемся...-----------------------------
divider=1;
Lots=GetSizeLot();
Magic=51; // Задаём магик... 5 и 1; 5 = пять минут, 1 = стратегия 1
New_Comm="Sell_M5_Стратегия_1_Основная позиция"; // Задаём комментарий для позиции
Lots_New=NormalizeLot(Lots/divider, False, NULL);
OpenPosition(NULL,OP_SELL,Lots_New,0,pb-tp*po,Magic,New_Comm);
return;
Question - is it possible that graphical objects are not simulated in the strategy tester in the non-visual mode? For example, I was testing code that opens trades by breaking the channel OBJ_REGRESSION - it trades in the visual mode, but if I turn it off, there are no trades... How to conduct optimization in this case?
in the indicator settings - line type, colour and thickness/width
SetIndexStyle(0, DRAW_NONE); SetIndexStyle(1, DRAW_LINE,EMPTY); SetIndexStyle(2, DRAW_NONE); SetIndexStyle(3, DRAW_NONE); SetIndexStyle(4, DRAW_NONE); it's here ....... but my tool has a line width of 0 and I want to set the width of 2 so I don't have to deal with settings ...... I don't know how to do it .... I'm not a programmer .... help me please ))))
I don't know anything about programming at all. I wanted to make CCI Filter (https://www.forex-tsd.com/indicators-metatrader-4/3356-cci-filter.html) the same for WPR, changed CCI to WPR and changed levels in coloring conditions of bars (not -100, 0, 100 like CCI, but -60, -50 and -40, because in MT WPR has range -100 to 0, I think, right?) But for some reason it compiles with an error, and the screen shows a monochrome indicator. What is wrong? Thanks in advance
Allow the use of cookies to log in to the MQL5.com website.
Please enable the necessary setting in your browser, otherwise you will not be able to log in.
You are signed in. Two-factor authentication has been disabled. Set it up again and scan a new QR code, or continue with two-factor authentication disabled.
static int time = Time[0];
if (time < Time[0]){
// old candle
} else {
// new candle
time = Time[0];
}
Now the trades are half as long as they were before
Instead of checking for a new bar, just pause between openings, set in seconds:
I check it this way (in bold, ignore /*PauseMain*/ - it's a random value of delay in minutes - from 5 to 9):
// Тут начало функции открытия позиций (открытие Buy).... // Ниже код открытия Sell: PauseMain51=random(5,9)*60; if (!Lot()) return; // Средств не хватает на миним.- выходим if (!OpnSell51 || !Trade) return; if (ExistPositions(NULL, OP_SELL, 51, 0)) // Если есть такой же открытый Sell { if (SecondsAfterOpenLastPos(NULL, OP_SELL, 51)<=/* PauseMain51*/ 7*60) return; (7*60 сек = 7 минут) // Если прошло мало времени - валим } //---------------------- Позиции ещё нету - открываемся...----------------------------- divider=1; Lots=GetSizeLot(); Magic=51; // Задаём магик... 5 и 1; 5 = пять минут, 1 = стратегия 1 New_Comm="Sell_M5_Стратегия_1_Основная позиция"; // Задаём комментарий для позиции Lots_New=NormalizeLot(Lots/divider, False, NULL); OpenPosition(NULL,OP_SELL,Lots_New,0,pb-tp*po,Magic,New_Comm); return;I hope it makes sense...
Boris, small correction in the code, forgot to add a reset of the array position, when returning to the original lot:
THANK YOU VERY MUCH! Everything worked out. Goes well and puts the right lots!!!
How can I change or add something to the code to set the bar width in the histogram?
in indicator settings - line type, colour and width/thickness
in the indicator settings - line type, colour and thickness/width
SetIndexStyle(1, DRAW_LINE,EMPTY);
SetIndexStyle(2, DRAW_NONE);
SetIndexStyle(3, DRAW_NONE);
SetIndexStyle(4, DRAW_NONE);
it's here ....... but my tool has a line width of 0 and I want to set the width of 2 so I don't have to deal with settings ...... I don't know how to do it .... I'm not a programmer .... help me please ))))
I don't know anything about programming at all. I wanted to make CCI Filter (https://www.forex-tsd.com/indicators-metatrader-4/3356-cci-filter.html) the same for WPR, changed CCI to WPR and changed levels in coloring conditions of bars (not -100, 0, 100 like CCI, but -60, -50 and -40, because in MT WPR has range -100 to 0, I think, right?) But for some reason it compiles with an error, and the screen shows a monochrome indicator. What is wrong? Thanks in advance
Memory is useless).
I want to know what kind of currency, prescribed the variables
string EUR="EURUSD";
string GBP="GBPUSD";
string symbl = "";
I write the following at start :
symbl = symbl(); //receive the value of the symbol
I want to compare the received value of symbl with the values of my variables, and if they match, then make a decision.
switch (symbl) {
case .......... then nothing happens (( break;
case ................ break;
}
Refresh my memory))
I figured out that only a character constant can be used, but how do I do it?
Memory is useless).
I want to know what kind of currency, prescribed the variables
string EUR="EURUSD";
string GBP="GBPUSD";
string symbl = "";
I write the following at start :
symbl = symbl(); //receive the value of the symbol
I want to compare the received value of symbl with the values of my variables, and if they match, then make a decision.
switch (symbl) {
case .......... then nothing happens (( break;
case ................ break;
}
Refresh your memory ))