TDI Traders Dynamic Index RSI Scanner All Pair TF

TDI Traders Dynamic Index RSI Scanner All Pair TF

Overview

TDI & RSI Dynamic Line Dashboard Scanner is a multi-symbol and multi-timeframe analytical indicator designed for MetaTrader 4. The tool monitors multiple currency pairs, commodities, or indices across selected chart timeframes simultaneously to detect crossover events derived from the Traders Dynamic Index (TDI) and dual Relative Strength Index (RSI) Dynamic Lines. Every detected signal is evaluated against an optional 15-module technical confluence suite before being displayed inside an interactive on-chart control table. In addition to directional signal identification, the dashboard calculates volatility-adjusted reference levels for Entry, Stop Loss (SL), Take Profit 1 (TP1), and Take Profit 2 (TP2) using the Average True Range (ATR), plots visual levels directly on the active price chart, and dispatches real-time multi-channel notifications.

Operating Principle and Signal Logic

- Closed-Bar Signal Evaluation (Non-Repainting Behavior): All primary crossover conditions and secondary confluence filters are calculated strictly on confirmed closed candles starting from bar index 1 backward within the configured lookback window (`InpLookback`). Active unclosed candle data (bar 0) is excluded from signal confirmation so that once a signal is generated on a closed bar, its timestamp, direction, and reference price levels remain fixed and do not repaint retroactively.

- Primary Oscillator Architecture: In TDI mode, the indicator computes a base RSI series and derives three analytical components: the fast smoothed Green TRSI line, the smoothed Red Signal line, and the volatility Market Base Yellow line. In RSI Dynamic Line mode, the indicator compares a fast RSI curve against a slow RSI curve.

- Six Selectable Signal Trigger Modes (`InpEntryMethod`):

  1. `ENTRY_RSI_CROSS`: Generates a bullish BUY signal when the fast RSI line crosses above the slow RSI line on a closed bar, and a bearish SELL signal when the fast RSI line crosses below the slow RSI line.

  2. `ENTRY_TDI_TRSI_CROSS_SIG`: Generates a BUY signal when the Green TRSI line crosses above the Red Signal line, and a SELL signal when the Green TRSI line crosses below the Red Signal line.

  3. `ENTRY_TDI_TRSI_CROSS_BASE`: Generates a BUY signal when the Green TRSI line crosses above the Yellow Market Base line, and a SELL signal when the Green TRSI line crosses below the Yellow Market Base line.

  4. `ENTRY_TDI_TRSI_CROSS_SIG_BASE`: Generates a BUY signal when the Green TRSI line crosses above the Red Signal line while positioned above the Yellow Market Base line, and a SELL signal when the Green TRSI line crosses below the Red Signal line while positioned below the Yellow Market Base line.

  5. `ENTRY_TDI_TRSI_CROSS_LEVEL50`: Generates a BUY signal when the Green TRSI line crosses upward across the 50.0 midpoint level, and a SELL signal when it crosses downward across the 50.0 level.

  6. `ENTRY_TDI_BASE_CROSS_LEVEL50`: Generates a BUY signal when the Yellow Market Base line crosses upward across the 50.0 midpoint level, and a SELL signal when it crosses downward across the 50.0 level.

- Built-In TDI Structural Filters: When any TDI mode is active, users can optionally enforce two additional directional gates: `InpUseBaseFilter` (requiring Green TRSI to remain above the Market Base for BUY and below for SELL) and `InpUseLevel50Filter` (requiring Green TRSI to remain above 50.0 for BUY and below 50.0 for SELL).

- Modular 15-Filter Confluence Suite: Before any candidate signal is accepted onto the dashboard, it must pass every enabled filter in the 15-category technical filter framework. If any enabled filter disagrees with the candidate signal direction on the signal candle, the signal is suppressed.

- Volatility-Based Reference Levels: For each validated signal, the Entry reference is recorded at the signal candle close price, Stop Loss distance is derived by multiplying the current ATR value by `InpATRMultSL`, and TP1/TP2 targets are projected using Risk-to-Reward ratios (`InpTP1_RR` and `InpTP2_RR`).

Key Technical Features

- Multi-Pair and Multi-Timeframe Matrix Scanning: Scans up to `InpMaxSymbols` symbols across user-defined timeframes (`M1` through `MN1`) on a configurable background timer cycle (`InpScanSec`), supporting both custom symbol lists and automatic Market Watch synchronization.

- Six Interchangeable Crossover Strategies: Switch instantly between classic TDI crossovers, Market Base breakouts, 50-level momentum shifts, and dual RSI Dynamic Line crossovers via a single dropdown parameter.

- Comprehensive 15-Module Technical Filter Suite: Combine primary crossover triggers with optional confirmation from RSI threshold crosses, ADX trend strength, Single Moving Average, Ichimoku Senkou Span B, long-period RSI 75, Double Moving Average alignment, Awesome Oscillator (amplitude, slope color, and zero-line), Parabolic SAR, Heiken Ashi candle polarity, CCI trend, CCI overbought/oversold zones, RVI trend and signal crossovers, MACD histogram and zero-line filters, Support/Resistance zones, Fibonacci retracement zones, and ATR-based Supertrend direction.

- Interactive Draggable and Collapsible Dashboard Panel: Reposition the panel anywhere on the chart by dragging its header bar, collapse it into a compact status bar using the `MIN`/`MAX` button, trigger immediate manual rescans with `REFRESH`, or remove panel objects with `CLEAR`. Persistent UI coordinates and minimized states are preserved across timeframe changes via terminal global variables.

- Multi-Criteria Column Sorting: Click directly on the `PAIR`, `TF`, `DIR`, or `TIME` column headers to sort active rows in ascending or descending order.

- One-Click Chart Switching and Visual Overlays: Click the `OPEN` button on any signal row to switch the active chart to that symbol and timeframe automatically while drawing the signal arrow and horizontal Entry, SL, TP1, and TP2 reference lines.

- Multi-Channel Alert Engine: Supports MetaTrader pop-up dialogs, custom WAV audio alerts, MetaQuotes ID mobile push notifications, and SMTP email alerts with duplicate-alert suppression per closed bar.

Operation Recommendations and Terminal Optimization

- Recommended Instruments: Compatible with liquid Forex major pairs (`EURUSD`, `GBPUSD`, `USDJPY`, `AUDUSD`, `USDCAD`, `USDCHF`, `NZDUSD`), cross pairs (`EURJPY`, `GBPJPY`), precious metals (`XAUUSD`), and indices. Ensure symbol names in `InpSymbols` match your broker's exact Market Watch naming convention (including any broker prefix or suffix), or enable `InpUseWatch` to load active Market Watch symbols automatically.

- Recommended Timeframes: Supports all standard MetaTrader 4 timeframes (`M1`, `M5`, `M15`, `M30`, `H1`, `H4`, `D1`, `W1`, `MN1`). Timeframes `M5` to `H1` are suitable for intraday monitoring, while `H4` and `D1` are suited for broader swing structure tracking.

- Account and Execution Environment: Works on all MetaTrader 4 account types (Standard, ECN, Raw Spread, Hedging, and Netting) because the product operates strictly as a non-trading analytical scanner without placing orders. Verify broker spread conditions when evaluating reference levels on lower timeframes.

- CPU and Memory Efficiency Guidelines: Scanning numerous symbols and timeframes simultaneously requires historical bar data synchronization for each slot. To maintain responsive terminal performance on standard hardware, keep `InpMaxSymbols` at 15 or fewer, set `InpBarsCopy` between 120 and 200 bars, keep `InpScanSec` at 5 seconds or higher, and avoid running multiple heavy dashboard instances across several open charts simultaneously.

Graphical Interface Legend and Alert System

- Dashboard Color Coding: By default, bullish `BUY` directions and confirming oscillator readings are highlighted in green (`C'0,230,118'`), bearish `SELL` directions are highlighted in red (`C'255,82,82'`), titles and active sort indicators appear in cyan (`C'0,210,255'`), and inactive cells or status notes appear in muted gray (`C'120,128,140'`).

- On-Chart Visual Markers: When `InpDrawOnChart` is enabled, the chart displays a directional Wingdings arrow at the signal bar (`InpColArrowBuy` / `InpColArrowSell`), a dotted cyan Entry line, a dashed red Stop Loss line, and two dashed green Take Profit lines (`TP1` and `TP2`) with right-aligned price labels.

- Interactive Controls: `REFRESH` reloads symbols/timeframes and forces an immediate scan; `CLEAR` removes dashboard table objects from the screen; `MIN` / `MAX` toggles between full table view and compact header bar view; `OPEN` switches the chart symbol/period to inspect the selected signal.

- Alert Delivery Behavior: Each alert message includes the symbol, timeframe, direction, signal timestamp, Entry, SL, TP1, TP2, and current oscillator readings. When `InpAlertOnlyNew` is `true`, notifications fire strictly once per newly closed signal bar timestamp for each symbol-timeframe pair.

Input Parameters Documentation

Entry Strategy Selection (`InpSectionEntry`)

- `InpEntryMethod` (Default: `ENTRY_TDI_TRSI_CROSS_SIG_BASE`) - Selects the active crossover detection strategy from six available TDI and RSI modes.

- `InpDirection` (Default: `0`) - Restricts signal output direction (`0` = Both Buy and Sell, `1` = Buy signals only, `2` = Sell signals only).

- `InpLookback` (Default: `60`, Unit: bars) - Maximum number of closed historical bars searched backward from bar 1 to find the latest valid signal.

RSI Crossover Settings (`InpSectionRSI`)

- `InpRSI1Period` (Default: `7`, Unit: bars) - Calculation period for the fast RSI line in `ENTRY_RSI_CROSS` mode.

- `InpRSI1Applied` (Default: `PRICE_CLOSE`) - Applied price source used to calculate the fast RSI line.

- `InpRSI2Period` (Default: `21`, Unit: bars) - Calculation period for the slow RSI line in `ENTRY_RSI_CROSS` mode.

- `InpRSI2Applied` (Default: `PRICE_CLOSE`) - Applied price source used to calculate the slow RSI line.

TDI Settings (`InpSectionTDI`)

- `InpPeriodRSI` (Default: `13`, Unit: bars) - Base RSI lookback period used to construct the TDI oscillator.

- `InpAppliedPriceRSI` (Default: `PRICE_CLOSE`) - Applied price source for the base TDI RSI calculation.

- `InpPeriodVolBand` (Default: `34`, Unit: bars) - Moving average period used to compute the TDI Yellow Market Base line.

- `InpPeriodSmRSI` (Default: `2`, Unit: bars) - Smoothing period applied to the base RSI to generate the Green TRSI line.

- `InpMethodSmRSI` (Default: `MODE_SMA`) - Smoothing moving average method (`MODE_SMA` or `MODE_EMA`) for the Green TRSI line.

- `InpPeriodSmSig` (Default: `7`, Unit: bars) - Smoothing period applied to the base RSI to generate the Red Signal line.

- `InpMethodSmSig` (Default: `MODE_SMA`) - Smoothing moving average method (`MODE_SMA` or `MODE_EMA`) for the Red Signal line.

- `InpUseBaseFilter` (Default: `true`) - Requires Green TRSI to be above the Yellow Market Base line for Buy signals and below for Sell signals.

- `InpUseLevel50Filter` (Default: `true`) - Requires Green TRSI to be above level 50.0 for Buy signals and below level 50.0 for Sell signals.

Filter 1: RSI Cross Filter (`InpFilter1`)

- `Use_RSI_Cross_Filter` (Default: `false`) - Enables or disables secondary RSI oversold/overbought threshold crossover confirmation.

- `RSI_Length` (Default: `14`, Unit: bars) - Lookback period for the secondary RSI confirmation filter.

- `RSI_Price_Source` (Default: `PRICE_CLOSE`) - Applied price source for the secondary RSI confirmation filter.

- `RSI_Oversold` (Default: `30.0`, Unit: RSI level) - Lower threshold level that RSI must cross upward to validate bullish signals.

- `RSI_Overbought` (Default: `70.0`, Unit: RSI level) - Upper threshold level that RSI must cross downward to validate bearish signals.

Filter 2: ADX Trend Filter (`InpFilter2`)

- `Use_ADX_Filter` (Default: `false`) - Enables or disables trend strength filtering via Average Directional Index (ADX).

- `ADX_Period` (Default: `10`, Unit: bars) - Calculation period for the ADX main trend strength line.

- `ADX_Min_Level` (Default: `20.0`, Unit: ADX value) - Minimum ADX main value required to allow signal generation.

Filter 3: Single MA Filter (`InpFilter3`)

- `Use_MA_Filter` (Default: `false`) - Enables or disables price-versus-Moving-Average directional trend filtering.

- `MA_Period` (Default: `50`, Unit: bars) - Averaging period for the single Moving Average trend filter.

- `MA_Method` (Default: `MODE_SMA`) - Moving Average smoothing method (`MODE_SMA`, `MODE_EMA`, `MODE_SMMA`, `MODE_LWMA`).

- `MA_Shift` (Default: `0`, Unit: bars) - Horizontal bar shift applied to the single Moving Average line.

Filter 4: Ichimoku Senkou Span B Filter (`InpFilter4`)

- `Use_Ichimoku_Filter` (Default: `false`) - Enables or disables Ichimoku Kinko Hyo Senkou Span B cloud baseline filtering.

- `Ichimoku_Tenkan` (Default: `9`, Unit: bars) - Tenkan-sen (Conversion Line) calculation period.

- `Ichimoku_Kijun` (Default: `26`, Unit: bars) - Kijun-sen (Base Line) calculation period.

- `Ichimoku_SenkouB` (Default: `52`, Unit: bars) - Senkou Span B (Leading Span B) calculation period.

Filter 5: RSI 75 Filter (`InpFilter5`)

- `Use_RSI75_Filter` (Default: `false`) - Enables or disables long-period RSI 50.0 midline bias filtering.

- `RSI_Filter_Period` (Default: `75`, Unit: bars) - Lookback period for the long-term RSI midline filter.

Filter 6: Double MA Filter (`InpFilter6`)

- `Use_DoubleMA_Filter` (Default: `false`) - Enables or disables dual Moving Average trend alignment filtering (MA A vs MA B).

- `MA_A_Period` (Default: `30`, Unit: bars) - Calculation period for Fast Moving Average A.

- `MA_A_Method` (Default: `MODE_EMA`) - Smoothing method for Fast Moving Average A.

- `MA_A_Applied` (Default: `PRICE_CLOSE`) - Applied price source for Fast Moving Average A.

- `MA_A_Shift` (Default: `0`, Unit: bars) - Horizontal bar shift for Fast Moving Average A.

- `MA_B_Period` (Default: `140`, Unit: bars) - Calculation period for Slow Moving Average B.

- `MA_B_Method` (Default: `MODE_EMA`) - Smoothing method for Slow Moving Average B.

- `MA_B_Applied` (Default: `PRICE_CLOSE`) - Applied price source for Slow Moving Average B.

- `MA_B_Shift` (Default: `0`, Unit: bars) - Horizontal bar shift for Slow Moving Average B.

Filter 7: Awesome Oscillator Filter (`InpFilter7`)

- `Use_AO_Filter` (Default: `false`) - Master switch to enable or disable Bill Williams Awesome Oscillator (AO) filtering.

- `Use_AO_Volume_Filter` (Default: `false`) - Enables minimum positive and maximum negative AO histogram amplitude checks.

- `AO_Buy_Min` (Default: `4.0`, Unit: AO value) - Minimum AO value required to confirm Buy signals when amplitude filtering is active.

- `AO_Sell_Max` (Default: `-4.0`, Unit: AO value) - Maximum negative AO value required to confirm Sell signals when amplitude filtering is active.

- `Use_AO_Color_Filter` (Default: `false`) - Requires rising AO histogram bars for Buy and falling AO histogram bars for Sell.

- `Use_AO_Zero_Filter` (Default: `false`) - Requires AO to be above zero and rising for Buy, or below zero and falling for Sell.

Filter 8: Parabolic SAR Filter (`InpFilter8`)

- `Use_SAR_Filter` (Default: `false`) - Enables or disables Parabolic Stop and Reverse (SAR) price-position filtering.

- `SAR_Step` (Default: `0.02`, Unit: step increment) - Acceleration factor step increment for Parabolic SAR.

- `SAR_Maximum` (Default: `0.2`, Unit: max factor) - Maximum acceleration factor cap for Parabolic SAR.

Filter 9: Heiken Ashi Filter (`InpFilter9`)

- `Use_HeikenAshi_Filter` (Default: `false`) - Enables or disables Heiken Ashi candle body polarity confirmation (bullish for Buy, bearish for Sell).

Filter 10: CCI Trend Filter (`InpFilter10`)

- `Use_CCI_Filter` (Default: `false`) - Enables or disables Commodity Channel Index (CCI) zero-line directional filtering.

- `CCI_Period` (Default: `50`, Unit: bars) - Lookback period for the CCI zero-line trend filter.

- `CCI_Applied` (Default: `PRICE_CLOSE`) - Applied price source for the CCI zero-line trend filter.

Filter 11: CCI OB & OS Filter (`InpFilter11`)

- `Use_CCI_OBOS_Filter` (Default: `false`) - Enables or disables CCI momentum filtering beyond overbought and oversold threshold levels.

- `CCI_OBOS_Period` (Default: `14`, Unit: bars) - Lookback period for the CCI OB/OS filter.

- `CCI_OBOS_Applied` (Default: `PRICE_CLOSE`) - Applied price source for the CCI OB/OS filter.

- `CCI_Overbought` (Default: `100.0`, Unit: CCI level) - Upper CCI threshold level for bullish momentum validation.

- `CCI_Oversold` (Default: `-100.0`, Unit: CCI level) - Lower CCI threshold level for bearish momentum validation.

Filter 12: RVI Filters (`InpFilter12`)

- `Use_RVI_Filter` (Default: `false`) - Enables or disables Relative Vigor Index (RVI) zero-line directional filtering.

- `RVI_Period` (Default: `75`, Unit: bars) - Lookback period for the RVI zero-line trend filter.

- `Use_RVI_Signal_Filter` (Default: `false`) - Enables or disables RVI main-line versus signal-line alignment filtering.

- `RVI_Signal_Period` (Default: `20`, Unit: bars) - Lookback period for the RVI main/signal comparison filter.

Filter 13: MACD Filters (`InpFilter13`)

- `Use_MACD_Filter` (Default: `false`) - Enables or disables MACD histogram polarity filtering (main line above or below signal line).

- `MACD_FastEMA` (Default: `12`, Unit: bars) - Fast EMA period for the MACD calculation.

- `MACD_SlowEMA` (Default: `26`, Unit: bars) - Slow EMA period for the MACD calculation.

- `MACD_SignalSMA` (Default: `9`, Unit: bars) - Signal SMA period for the MACD calculation.

- `MACD_Applied` (Default: `PRICE_CLOSE`) - Applied price source for the MACD calculation.

- `Use_MACD_Zero_Filter` (Default: `false`) - Enables or disables MACD main-line zero-level regime filtering.

Filter 14: SR & Fibonacci Filters (`InpFilter14`)

- `Use_SR_Filter` (Default: `false`) - Enables or disables recent swing Support and Resistance proximity zone filtering.

- `SR_Period` (Default: `50`, Unit: bars) - Historical lookback window in bars used to locate Support and Resistance boundaries.

- `SR_Zone_Points` (Default: `80`, Unit: points) - Price tolerance buffer in points around Support/Resistance levels.

- `Use_Fib_Filter` (Default: `false`) - Enables or disables swing-anchored Fibonacci retracement zone filtering.

- `Fib_Level_1` (Default: `0.382`, Unit: ratio) - First Fibonacci retracement ratio boundary.

- `Fib_Level_2` (Default: `0.618`, Unit: ratio) - Second Fibonacci retracement ratio boundary.

- `ZigZag_Depth` (Default: `12`, Unit: bars) - Minimum bar depth used to identify swing highs and lows for Fibonacci anchoring.

- `ZigZag_Deviation` (Default: `5`, Unit: points) - Minimum price deviation in points between consecutive swing points.

- `ZigZag_Backstep` (Default: `3`, Unit: bars) - Minimum bar separation between consecutive swing highs or lows.

Filter 15: Supertrend Filter (`InpFilter15`)

- `Use_Supertrend_Filter` (Default: `false`) - Enables or disables ATR-based Supertrend directional regime filtering.

- `ST_AtrPeriod` (Default: `10`, Unit: bars) - Wilder ATR lookback period for the Supertrend volatility band calculation.

- `ST_Factor` (Default: `3.0`, Unit: multiplier) - ATR band multiplier factor governing Supertrend sensitivity.

Scanner Settings (`InpSectionScanner`)

- `InpSymbols` (Default: `"EURUSD,GBPUSD,USDJPY,AUDUSD,USDCAD,USDCHF,NZDUSD,EURJPY,GBPJPY,XAUUSD"`) - Comma-separated list of instruments to scan when `InpUseWatch` is `false`.

- `InpTimeframes` (Default: `"M5,M15,M30,H1,H4"`) - Comma-separated list of chart timeframes scanned for each symbol.

- `InpUseWatch` (Default: `true`) - Scans visible instruments directly from the MT4 Market Watch list up to `InpMaxSymbols`.

- `InpMaxSymbols` (Default: `15`, Unit: symbols) - Maximum number of symbols scanned simultaneously to optimize CPU load.

- `InpScanSec` (Default: `7`, Unit: seconds) - Background timer interval in seconds between automatic multi-pair scans (minimum 2 seconds).

- `InpBarsCopy` (Default: `150`, Unit: bars) - Number of historical bars copied per symbol and timeframe during each scan pass.

ATR SL & TP Settings (`InpSectionATR`)

- `InpATRPeriod` (Default: `14`, Unit: bars) - ATR calculation period used to size volatility-based Stop Loss and Take Profit levels.

- `InpATRMultSL` (Default: `1.5`, Unit: multiplier) - ATR multiplier applied to determine Stop Loss distance from the signal entry price.

- `InpTP1_RR` (Default: `1.0`, Unit: Risk:Reward ratio) - Risk-to-Reward multiplier relative to Stop Loss distance for Take Profit Target 1.

- `InpTP2_RR` (Default: `2.0`, Unit: Risk:Reward ratio) - Risk-to-Reward multiplier relative to Stop Loss distance for Take Profit Target 2.

Alert Notifications (`InpSectionAlert`)

- `InpAlertPopup` (Default: `true`) - Enables or disables MetaTrader pop-up alert windows on new signal detection.

- `InpAlertSound` (Default: `true`) - Enables or disables audible WAV alert playback on new signal detection.

- `InpSoundFile` (Default: `"alert.wav"`) - Audio filename located inside the MetaTrader `Sounds` directory.

- `InpAlertPush` (Default: `false`) - Enables or disables mobile push notifications via MetaQuotes ID.

- `InpAlertEmail` (Default: `false`) - Enables or disables email notifications via the terminal SMTP configuration.

- `InpEmailSubject` (Default: `"Scanner Dashboard Signal"`) - Prefix text inserted into the subject line of outgoing alert emails.

- `InpAlertOnlyNew` (Default: `true`) - Restricts alerts to newly closed signal bar timestamps to prevent repeated notifications.

Dashboard Display (`InpSectionDisplay`)

- `InpX` (Default: `15`, Unit: pixels) - Initial horizontal X-coordinate offset of the dashboard from the upper-left chart corner.

- `InpY` (Default: `25`, Unit: pixels) - Initial vertical Y-coordinate offset of the dashboard from the upper-left chart corner.

- `InpScale` (Default: `100`, Unit: percentage, range `70`–`180`) - Global UI scaling percentage for High-DPI displays.

- `InpRowH` (Default: `18`, Unit: pixels) - Height of each individual signal row in the dashboard table.

- `InpFont` (Default: `8`, Unit: points) - Base font size used for table labels and headers.

- `InpPadX` (Default: `8`, Unit: pixels) - Left and right horizontal padding inside the dashboard frame.

- `InpWPair` (Default: `68`, Unit: pixels) - Width of the `PAIR` symbol column.

- `InpWTF` (Default: `34`, Unit: pixels) - Width of the `TF` timeframe column.

- `InpWArah` (Default: `44`, Unit: pixels) - Width of the `DIR` signal direction column.

- `InpWTime` (Default: `96`, Unit: pixels) - Width of the `TIME` signal timestamp column.

- `InpWEntry` (Default: `62`, Unit: pixels) - Width of the `ENTRY` reference price column.

- `InpWSL` (Default: `60`, Unit: pixels) - Width of the `SL` Stop Loss reference column.

- `InpWTP1` (Default: `60`, Unit: pixels) - Width of the `TP 1` first target reference column.

- `InpWTP2` (Default: `60`, Unit: pixels) - Width of the `TP 2` second target reference column.

- `InpWOsc1` (Default: `40`, Unit: pixels) - Width of the primary oscillator readout column (`TRSI` or `RSI I`).

- `InpWOsc2` (Default: `40`, Unit: pixels) - Width of the secondary oscillator readout column (`SIG`, `BASE`, or `RSI II`).

- `InpWUmur` (Default: `42`, Unit: pixels) - Width of the `AGE` signal elapsed-time column.

- `InpWOpen` (Default: `44`, Unit: pixels) - Width of the `OPEN` chart-switching button column.

- `InpShowEmpty` (Default: `false`) - Displays rows for scanned symbol-timeframe pairs that currently have no active signal.

- `InpMaxRows` (Default: `16`, Unit: rows) - Maximum number of visible signal rows rendered in the dashboard table.

Sorting (`InpSectionSort`)

- `InpSortBy` (Default: `SORT_TIME`) - Initial column sorting mode (`SORT_TIME`, `SORT_PAIR`, `SORT_TF`, or `SORT_DIR`).

- `InpSortNewest` (Default: `true`) - Initial sort ordering (`true` = descending/newest first, `false` = ascending/oldest first).

Chart Visualization (`InpSectionVisual`)

- `InpDrawOnChart` (Default: `true`) - Enables or disables automatic plotting of the active chart's latest valid signal overlay.

- `InpShowArrow` (Default: `true`) - Toggles visibility of directional Buy/Sell Wingdings arrows on the signal candle.

- `InpShowLevels` (Default: `true`) - Toggles visibility of horizontal Entry, SL, TP1, and TP2 reference trendlines and labels.

- `InpExtendBars` (Default: `25`, Unit: bars) - Number of bars forward to extend horizontal Entry, SL, and TP reference lines.

- `InpArrowCodeBuy` (Default: `233`, Unit: Wingdings code) - Wingdings symbol code used for bullish Buy signal arrows.

- `InpArrowCodeSell` (Default: `234`, Unit: Wingdings code) - Wingdings symbol code used for bearish Sell signal arrows.

- `InpArrowSize` (Default: `2`, Unit: width `1`–`5`) - Size thickness of plotted directional arrows.

- `InpArrowDistance` (Default: `15`, Unit: points) - Vertical offset in points separating signal arrows from the candle price.

Color Palette (`InpSectionColors`)

- `InpColBg` (Default: `C'18,22,28'`) - Outer container background color of the dashboard panel.

- `InpColHead` (Default: `C'32,38,48'`) - Background color for the header bar, column titles, and `OPEN` buttons.

- `InpColRow` (Default: `C'24,28,36'`) - Background color for even-numbered signal rows.

- `InpColRow2` (Default: `C'28,33,42'`) - Alternating background color for odd-numbered signal rows.

- `InpColText` (Default: `C'220,225,230'`) - Primary text color for symbols, timeframes, timestamps, and entry prices.

- `InpColBull` (Default: `C'0,230,118'`) - Accent text color for bullish `BUY` signals and bullish oscillator readings.

- `InpColBear` (Default: `C'255,82,82'`) - Accent text color for bearish `SELL` signals and bearish oscillator readings.

- `InpColMute` (Default: `C'120,128,140'`) - Muted text color for status text, inactive cells, and footer instructions.

- `InpColAccent` (Default: `C'0,210,255'`) - Highlight color for the panel title, active sort header, and `OPEN` button labels.

- `InpColArrowBuy` (Default: `C'0,230,118'`) - Color of bullish Buy arrows plotted on the price chart.

- `InpColArrowSell` (Default: `C'255,82,82'`) - Color of bearish Sell arrows plotted on the price chart.

- `InpColEntry` (Default: `C'0,210,255'`) - Color of the Entry reference line and label on the chart.

- `InpColSL` (Default: `C'255,82,82'`) - Color of the Stop Loss reference line, chart label, and dashboard `SL` column.

- `InpColTP1` (Default: `C'0,200,83'`) - Color of the Take Profit 1 reference line, chart label, and dashboard `TP 1` column.

- `InpColTP2` (Default: `C'0,230,118'`) - Color of the Take Profit 2 reference line, chart label, and dashboard `TP 2` column.

Risk Disclaimer

Trading foreign exchange, commodities, indices, and other financial instruments carries a high level of risk and may not be suitable for all investors. Past performance and historical signal behavior do not guarantee future results. This software is an analytical technical indicator and visual dashboard scanner designed solely to assist with market monitoring; it does not execute trades automatically or guarantee financial profit. Always test and evaluate the indicator thoroughly on a demo account to understand its operational behavior before using it to inform live trading decisions.

Weitere Produkte dieses Autors
Übersicht MACD Signal mit Multi-Filtern ist ein fortschrittlicher Indikator für die technische Analyse, der speziell für MetaTrader 5 (MT5) entwickelt wurde. Die Software kombiniert die klassische Architektur des Moving Average Convergence Divergence (MACD)-Oszillators mit einer modularen Bestätigungs-Engine mit 14 Filtern (MultiFilterSuite). Er wurde entwickelt, um manuelle Trader, quantitative Analysten und Entwickler algorithmischer Systeme dabei zu unterstützen, Momentum-Veränderungen, Trend
Parabolic SAR Multi-Filter-System MT5: Algorithmische Trendumkehr-Engine 1. PRODUKTÜBERSICHT & FUNKTIONSARCHITEKTUR Das Parabolic SAR Multi-Filter-System MT5 ist ein professioneller, aus mehreren Komponenten bestehender Indikator zur technischen Analyse, der speziell für das MetaTrader 5-Terminal entwickelt wurde. Der Indikator kombiniert das klassische Parabolic Time/Price-System von J. Welles Wilder mit einer fortschrittlichen modularen Filterarchitektur, die aus 17 unterschiedlichen sekundär
Hull Trend Arrows MT5 mit Multi-Filter-Suite – Technische Dokumentation 1. Überblick und analytischer Zweck Hull Trend Arrows MT5 mit Multi-Filter-Suite ist ein algorithmischer technischer Indikator für MetaTrader 5. Er kombiniert die verzögerungsarme Berechnungsengine des Hull Moving Average (HMA) mit vierzehn modularen Bestätigungsfiltern, um Richtungswechsel im Momentum zu erkennen, Wendepunkte zu berechnen und nicht-repaintende Einstiegssignale im Chart anzuzeigen. Standard-Gleitende Durchs
FREE
Produktübersicht: Technisches Multi-Filter-System „Relative Vigor Index“ Der Relative Vigor Index (RVI) Multi-Filter-Indikator ist eine umfassende Engine zur technischen Analyse, die für das MetaTrader 5-Terminal entwickelt wurde. Dieses Analysesystem wurde entwickelt, um zyklische Momentumverschiebungen, Trendfortsetzungen und strukturelle Marktwendepunkte zu identifizieren, und kombiniert die klassische Relative-Vigor-Index-Formel mit einer fortschrittlichen, mehrschichtigen Bestätigungsmatrix
FREE
HA Signal MultiFilter MT5 – Technisches Betriebshandbuch und Architekturleitfaden 1. SYSTEMÜBERBLICK UND ARCHITEKTURGRUNDLAGEN HA Signal MultiFilter MT5 ist ein spezieller Analyseindikator, der für das MetaTrader 5-Terminal entwickelt wurde, um richtungsgebundene Momentumausweitungen und strukturelle Trendfortsetzungen zu identifizieren[Zitat: 2]. Durch die Kombination der geglätteten Heiken-Ashi-Kerzenkursdaten mit einer modularen, 15-schichtigen Filterreihe zur sekundären Bestätigung extrahie
FREE
1. ÜBERBLICK Harmonic Dashboard ist ein spezialisierter Analyseindikator für mehrere Symbole und Zeitrahmen, der für MetaTrader 5 (MT5) entwickelt wurde. Die Software scannt Finanzinstrumente systematisch über mehrere Zeitrahmen hinweg, um sechs klassische harmonische Chartmuster zu identifizieren: Gartley, Bat, Butterfly, Crab, Cypher und Shark. Die Anwendung bündelt die Ergebnisse des Multi-Asset-Scanners, Validierungskennzahlen für Trendfilter, Kursprognosen und interaktive Steuerelemente z
Übersicht Der MA Cross Scanner Pro ist ein fortschrittliches, hochoptimiertes Analyse-Dashboard für mehrere Symbole und Zeitrahmen, das speziell für das MetaTrader 5-Terminal entwickelt wurde. Dieses Tool richtet sich an technische Analysten, systemorientierte Trader und quantitative Forscher und dient als umfassende Marktüberwachungs-Engine. Sein Hauptziel ist die kontinuierliche, gleichzeitige Überwachung einer individuell zusammengestellten Auswahl an Finanzinstrumenten über zahlreiche Zeitr
CCI MultiFilter Überkauft-Überverkauft-Signal Pro MT5 Technische Daten und Bedienungsanleitung 1. Überblick und Systemidentität CCI MultiFilter Overbought Oversold Signal Pro MT5 ist ein technischer Analyseindikator auf institutionellem Niveau, der nativ für MetaTrader 5 entwickelt wurde. Das System wurde für quantitative Analysten, systematisch handelnde Trader und Multi-Asset-Händler entwickelt und bietet einen objektiven algorithmischen Rahmen zur Identifizierung zyklischer Marktextreme, Mom
WPR Williams-Prozentbereich – Scanner-Dashboard für alle Paare und Zeitrahmen Übersicht WPR Scanner Dashboard Pro ist ein für MetaTrader 4 (MT4) entwickelter Indikator zum Scannen mehrerer Symbole und Zeitrahmen sowie ein Dienstprogramm zur visuellen Überlagerung von Charts. Das Tool überwacht gleichzeitig in einem einzigen Chartfenster die Momentum-Erschöpfung des Williams Percent Range (WPR) sowie Schwellenwertdurchbrüche über mehrere Währungspaare, Metalle, Indizes und CFDs hinweg. Zusätzli
WAE Waddah Attar Explosion Multi-Paar-Zeitrahmen-Scanner 1. Überblick - Der WAE Scanner Dashboard ist ein Indikator für die technische Analyse und ein Marktscanner für mehrere Symbole und Zeitrahmen, der für MetaTrader 4 (MT4) entwickelt wurde. - Er automatisiert die Überwachung mehrerer Charts, indem er auf Basis der Waddah-Attar-Explosion-Methode (WAE) gleichzeitig mehrere Währungspaare, Kreuzkurse, Indizes oder Metalle auf volatilitätsgetriebene Momentum-Ausbrüche scannt. - Potenzielle Sign
UT Bot Trend – Dashboard zum Scannen mehrerer Paare über verschiedene Zeitrahmen Übersicht Das UT Bot Scanner-Dashboard ist ein technischer Indikator und Marktscanner für mehrere Währungspaare und Zeitrahmen, der nativ für MetaTrader 4 (MT4) entwickelt wurde. Es überwacht kontinuierlich ausgewählte Devisenpaare, Edelmetalle, Indizes oder aktive Market-Watch-Symbole gleichzeitig über mehrere Zeitrahmen hinweg, um dynamische Crossovers von Trailing-Stops bei der Average True Range (ATR)-Volatilit
Stochastik-Scanner-Dashboard für MetaTrader 4 Dashboard für den stochastischen Überkauft- und Überverkauft-Scanner – alle Paare, alle Zeitrahmen Übersicht - Das Stochastik-Scanner-Dashboard ist ein für MetaTrader 4 (MT4) entwickelter Indikator zur technischen Analyse sowie ein Marktscanner, der mehrere Symbole und Zeitrahmen unterstützt. - Das Tool überwacht kontinuierlich benutzerdefinierte Währungspaare, Metalle oder „Market Watch“-Symbole über mehrere Zeitrahmen hinweg in einem einzigen Char
SSL-Kanal-Trend-Scanner-Dashboard – mehrere Paare, mehrere Zeitrahmen Übersicht Das SSL-Channel-Multi-Filter-Dashboard ist ein Indikator für die technische Analyse und ein Marktscanner für mehrere Symbole und Zeitrahmen, der für MetaTrader 4 entwickelt wurde. Es überwacht kontinuierlich mehrere Währungspaare, Rohstoffe oder andere Broker-Instrumente über vom Benutzer ausgewählte Zeitrahmen hinweg, um Richtungswechsel im Kanal zu erkennen, die durch eine optionale technische Filtersuite mit 15 Mo
Relative-Vigor-Index (RVI) – Dashboard mit Scanner für alle Paare und Zeitrahmen Übersicht Das RVI-Scanner-Dashboard ist ein technischer Indikator für mehrere Währungspaare und Zeitrahmen sowie ein interaktives Scanner-Panel für MetaTrader 4 (MT4). Es basiert auf dem Relative-Vigor-Index-Oszillator (RVI) und überwacht kontinuierlich mehrere Währungspaare, Rohstoffe oder Indizes über ausgewählte Zeitrahmen hinweg in einem einzigen Chartfenster. Das Tool erkennt richtungsbezogene Momentum-Crosso
RSI-Parabol-Überkauft-Überverkauft-Scanner für mehrere Paare und Zeitrahmen 1. Überblick - Das RSI Parabolic Scanner Dashboard ist ein technischer Analyseindikator für mehrere Symbole und Zeitrahmen sowie ein Echtzeit-Marktscanner, der für MetaTrader 4 (MT4) entwickelt wurde. - Er überwacht kontinuierlich benutzerdefinierte Währungspaare, Metalle oder sichtbare Instrumente aus der Marktübersicht über mehrere Chart-Zeitrahmen hinweg, um Momentum-Umkehrungen sowie überkaufte oder überverkaufte Ma
RSI-Divergenz-Dashboard für den Scan mehrerer Paare über verschiedene Zeitrahmen Übersicht - Produkttyp: Indikator für die technische Analyse mehrerer Symbole und Zeitrahmen sowie interaktiver Markt-Dashboard-Scanner für MetaTrader 4 (MT4). - Hauptzweck: Überwacht kontinuierlich konfigurierte Währungspaare, Edelmetalle, Indizes oder aktive „Market Watch“-Symbole über mehrere Chart-Zeitrahmen hinweg gleichzeitig, um reguläre und versteckte RSI-Divergenzmuster (Relative Strength Index) in einem e
Übersicht - Produktbeschreibung: Der Pola MultiCandle Scanner Dashboard ist ein für MetaTrader 4 (MT4) entwickelter Indikator zur technischen Analyse sowie ein Marktscanner, der mehrere Währungspaare und Zeitrahmen abdeckt. - Hauptzweck: Überwacht kontinuierlich benutzerdefinierte Währungspaare, Edelmetalle oder Instrumente aus der Marktübersicht über mehrere Zeitrahmen hinweg, um strukturierte Kursmuster aus mehreren Kerzen zu erkennen, Setups mithilfe einer modularen Suite aus 15 Indikatoren
MACD-Signal-Trend-Cross-Scanner – Dashboard für alle Währungspaare Übersicht Der MACD-Scanner-Dashboard ist ein Tool zur technischen Analyse und ein Dashboard-Indikator für mehrere Symbole und Zeitrahmen, der für MetaTrader 4 entwickelt wurde[Zitat: 1]. Sein Hauptzweck besteht darin, MACD-Crossover-Ereignisse über mehrere Währungspaare und Chart-Zeitrahmen hinweg gleichzeitig in einem einzigen aktiven Chartfenster zu überwachen[Zitat: 1]. Anstatt manuell zwischen Dutzenden von Charts hin- und h
MA-Gleitender-Durchschnitt-Kreuzungs-Scanner – Dashboard für alle Währungspaare und Zeitrahmen Übersicht Der MA Cross Scanner ist ein analytischer technischer Indikator für mehrere Symbole und Zeitrahmen, der mit einem interaktiven Dashboard-Panel direkt im Chart für MetaTrader 4 ausgestattet ist[Zitat: 1]. Das Tool wurde entwickelt, um Kreuzungspunkte von gleitenden Durchschnitten (MA) über mehrere Währungspaare und Zeitrahmen hinweg gleichzeitig zu überwachen und dabei die Signalerfassung, di
Ichimoku Tenkan-Kijun-Cross-Scanner – alle Währungspaare, alle Zeitrahmen Übersicht Der TK Cross Scanner Dashboard ist ein Indikator für die technische Analyse und ein Multi-Asset-Marktscanner, der für die MetaTrader 4-Plattform entwickelt wurde. Das Tool überwacht gleichzeitig mehrere Währungspaare, Rohstoffe und Zeitrahmen, um Ichimoku-Tenkan-sen- und Kijun-sen-Kreuzungen (TK Cross) zu erkennen. Zusätzlich zum automatisierten Signalscan berechnet die Software dynamische Stop-Loss- (SL) und do
Ichimoku Senkou Span B-Scanner für alle Währungspaare und Zeitrahmen Übersicht Der Senkou Span B Scanner Dashboard MT4 ist ein Indikator für die technische Analyse und ein Multi-Asset-Marktscanner, der für MetaTrader 4 entwickelt wurde. Das Tool überwacht mehrere Währungspaare, Rohstoffe und Zeitrahmen gleichzeitig in einem einzigen Chartfenster, um Preisinteraktionen mit der Senkou Span B-Grenze des Ichimoku Kinko Hyo zu erkennen. Neben der Suche nach potenziellen Signalen integriert der Indik
Heiken-Ashi-Dashboard zum Scannen mehrerer Währungspaare und Zeitrahmen Übersicht Das Heiken-Ashi-Dashboard für den Multi-Zeitrahmen-Scan ist ein Tool zur technischen Analyse sowie ein Marktscanner für mehrere Symbole und Zeitrahmen, das für die MetaTrader-4-Plattform entwickelt wurde. Das Tool ist darauf ausgelegt, mehrere Währungspaare, Rohstoffe oder Indizes gleichzeitig in einem einzigen Chartfenster zu überwachen. Anstatt manuell zwischen Dutzenden von Charts und Zeitrahmen hin- und herzuw
Pro Harmonic Pattern Scanner – Dashboard für alle Währungspaare und Zeitrahmen Der „Harmonic Pattern Scanner Dashboard MT4“ ist ein analytischer technischer Indikator für mehrere Symbole und Zeitrahmen, der für MetaTrader 4 entwickelt wurde. Er scannt automatisch die Kursentwicklung ausgewählter Währungspaare, Metalle oder Instrumente aus der Marktübersicht, um klassische harmonische XABCD-Strukturen zu identifizieren, Fibonacci-basierte Einstiegs-, Stop-Loss- und Take-Profit-Zonen zu berechnen
Fraktaler Breakout-Scanner – Dashboard für mehrere Währungspaare und Zeitrahmen Übersicht Das Fractal Breakout Scanner Dashboard ist ein Indikator für die technische Analyse sowie ein Scan-Tool für mehrere Symbole und Zeitrahmen, das für MetaTrader 4 entwickelt wurde. Das Tool überwacht gleichzeitig mehrere Währungspaare, Rohstoffe und Indizes, um Kursausbrüche jenseits bestätigter Bill-Williams-Fraktal-Swing-Hochs und -Swing-Tiefs zu erkennen. Anstatt manuell zwischen Dutzenden von Instrumente
Scan nach institutionellen Engulfing-Kerzenmustern für alle Paare und Zeitrahmen Der „Engulfing Scanner Dashboard“ ist ein Tool zur technischen Analyse und ein Scanner für Kerzenmuster, der mehrere Währungspaare und Zeitrahmen in MetaTrader 4 unterstützt. Es erkennt gleichzeitig „Bullish Engulfing“- und „Bearish Engulfing“-Setups über mehrere Währungspaare und Zeitrahmen hinweg und zeigt aktive Signale in einer interaktiven Tabelle direkt im Chart an, zusammen mit ATR-basierten Referenzwerten f
Pinbar-Marubozu-Rejection-Kerzen-Scanner – alle Paare, alle Zeitrahmen Übersicht Der „Candle Pattern Scanner Dashboard“ ist ein Tool zur technischen Analyse und ein für MetaTrader 4 entwickelter Scanner-Indikator, der mehrere Währungspaare und Zeitrahmen abdeckt. Der Indikator überwacht kontinuierlich mehrere Währungspaare, Rohstoffe oder Indizes über ausgewählte Zeitrahmen hinweg, um bestimmte japanische Kerzenmuster zu erkennen – nämlich „Candle Rejection“, „Full-Body Marubozu“ und „Classic P
Chaikin-Oszillator-Scanner – Dashboard für alle Währungspaare und Zeitrahmen Übersicht Der Chaikin-Oszillator-Scanner-Dashboard ist ein Tool zur technischen Analyse und ein Marktscanner für mehrere Symbole und Zeitrahmen, der für MetaTrader 4 (MT4) entwickelt wurde [Zitat: 1]. Der Indikator überwacht mehrere Währungspaare, Rohstoffe oder Indizes gleichzeitig über ausgewählte Chart-Zeitrahmen hinweg, um Ereignisse zu identifizieren, bei denen der Chaikin-Oszillator die Nulllinie kreuzt[Zitat: 1]
CCI-Signal-Trend-Überkauft-Überverkauft-Scanner – Alle Paare – Zeitrahmen – Dashboard Das CCI-Dashboard mit Multi-Zeitrahmen-Scanner ist ein für MetaTrader 4 entwickeltes Tool zur technischen Analyse und ein Marktscanner für mehrere Symbole. Der Indikator überwacht mehrere Währungspaare und Zeitrahmen gleichzeitig mithilfe von Berechnungen des Commodity Channel Index (CCI) in Kombination mit einer optionalen Bestätigungssuite aus mehreren Indikatoren und Volatilitätsprognosen auf Basis der Ave
BB Bollinger-Bänder-Breakout-Scanner – alle Paare, alle Zeitrahmen Der Bollinger-Bänder-Breakout-Scanner-Dashboard ist ein Tool zur technischen Analyse sowie ein Marktscanner für mehrere Symbole und Zeitrahmen, der für MetaTrader 4 (MT4) entwickelt wurde. Die Software überwacht kontinuierlich mehrere Währungspaare, Rohstoffe oder Indizes über benutzerdefinierte Zeitrahmen hinweg, um bestätigte Bollinger-Bänder-Breakout-Setups zu erkennen. Jedes erkannte Signal wird anhand einer optionalen modul
ADX-Dashboard für den Trend-Scanner mit mehreren Paaren und verschiedenen Zeitrahmen Übersicht: ADX Scanner Dashboard Pro ist ein technischer Analyseindikator und Marktscanner für mehrere Symbole und Zeitrahmen, der für die MetaTrader 4-Plattform entwickelt wurde. Die Software überwacht kontinuierlich die Richtungsbewegung des Average Directional Index (ADX) über vom Benutzer ausgewählte Finanzinstrumente und Chartzeiträume hinweg gleichzeitig. Alle erkannten Handelssignale, dynamische Risikoma
Auswahl:
Keine Bewertungen
Antwort auf eine Rezension