TDI Traders Dynamic Index RSI Scanner All Pair TF

TDI Traders Dynamic Index RSI Scanner All Pair TF

Overview

TDI & RSI Dynamic Line Dashboard Scanner is a multi-symbol and multi-timeframe analytical indicator designed for MetaTrader 4. The tool monitors multiple currency pairs, commodities, or indices across selected chart timeframes simultaneously to detect crossover events derived from the Traders Dynamic Index (TDI) and dual Relative Strength Index (RSI) Dynamic Lines. Every detected signal is evaluated against an optional 15-module technical confluence suite before being displayed inside an interactive on-chart control table. In addition to directional signal identification, the dashboard calculates volatility-adjusted reference levels for Entry, Stop Loss (SL), Take Profit 1 (TP1), and Take Profit 2 (TP2) using the Average True Range (ATR), plots visual levels directly on the active price chart, and dispatches real-time multi-channel notifications.

Operating Principle and Signal Logic

- Closed-Bar Signal Evaluation (Non-Repainting Behavior): All primary crossover conditions and secondary confluence filters are calculated strictly on confirmed closed candles starting from bar index 1 backward within the configured lookback window (`InpLookback`). Active unclosed candle data (bar 0) is excluded from signal confirmation so that once a signal is generated on a closed bar, its timestamp, direction, and reference price levels remain fixed and do not repaint retroactively.

- Primary Oscillator Architecture: In TDI mode, the indicator computes a base RSI series and derives three analytical components: the fast smoothed Green TRSI line, the smoothed Red Signal line, and the volatility Market Base Yellow line. In RSI Dynamic Line mode, the indicator compares a fast RSI curve against a slow RSI curve.

- Six Selectable Signal Trigger Modes (`InpEntryMethod`):

  1. `ENTRY_RSI_CROSS`: Generates a bullish BUY signal when the fast RSI line crosses above the slow RSI line on a closed bar, and a bearish SELL signal when the fast RSI line crosses below the slow RSI line.

  2. `ENTRY_TDI_TRSI_CROSS_SIG`: Generates a BUY signal when the Green TRSI line crosses above the Red Signal line, and a SELL signal when the Green TRSI line crosses below the Red Signal line.

  3. `ENTRY_TDI_TRSI_CROSS_BASE`: Generates a BUY signal when the Green TRSI line crosses above the Yellow Market Base line, and a SELL signal when the Green TRSI line crosses below the Yellow Market Base line.

  4. `ENTRY_TDI_TRSI_CROSS_SIG_BASE`: Generates a BUY signal when the Green TRSI line crosses above the Red Signal line while positioned above the Yellow Market Base line, and a SELL signal when the Green TRSI line crosses below the Red Signal line while positioned below the Yellow Market Base line.

  5. `ENTRY_TDI_TRSI_CROSS_LEVEL50`: Generates a BUY signal when the Green TRSI line crosses upward across the 50.0 midpoint level, and a SELL signal when it crosses downward across the 50.0 level.

  6. `ENTRY_TDI_BASE_CROSS_LEVEL50`: Generates a BUY signal when the Yellow Market Base line crosses upward across the 50.0 midpoint level, and a SELL signal when it crosses downward across the 50.0 level.

- Built-In TDI Structural Filters: When any TDI mode is active, users can optionally enforce two additional directional gates: `InpUseBaseFilter` (requiring Green TRSI to remain above the Market Base for BUY and below for SELL) and `InpUseLevel50Filter` (requiring Green TRSI to remain above 50.0 for BUY and below 50.0 for SELL).

- Modular 15-Filter Confluence Suite: Before any candidate signal is accepted onto the dashboard, it must pass every enabled filter in the 15-category technical filter framework. If any enabled filter disagrees with the candidate signal direction on the signal candle, the signal is suppressed.

- Volatility-Based Reference Levels: For each validated signal, the Entry reference is recorded at the signal candle close price, Stop Loss distance is derived by multiplying the current ATR value by `InpATRMultSL`, and TP1/TP2 targets are projected using Risk-to-Reward ratios (`InpTP1_RR` and `InpTP2_RR`).

Key Technical Features

- Multi-Pair and Multi-Timeframe Matrix Scanning: Scans up to `InpMaxSymbols` symbols across user-defined timeframes (`M1` through `MN1`) on a configurable background timer cycle (`InpScanSec`), supporting both custom symbol lists and automatic Market Watch synchronization.

- Six Interchangeable Crossover Strategies: Switch instantly between classic TDI crossovers, Market Base breakouts, 50-level momentum shifts, and dual RSI Dynamic Line crossovers via a single dropdown parameter.

- Comprehensive 15-Module Technical Filter Suite: Combine primary crossover triggers with optional confirmation from RSI threshold crosses, ADX trend strength, Single Moving Average, Ichimoku Senkou Span B, long-period RSI 75, Double Moving Average alignment, Awesome Oscillator (amplitude, slope color, and zero-line), Parabolic SAR, Heiken Ashi candle polarity, CCI trend, CCI overbought/oversold zones, RVI trend and signal crossovers, MACD histogram and zero-line filters, Support/Resistance zones, Fibonacci retracement zones, and ATR-based Supertrend direction.

- Interactive Draggable and Collapsible Dashboard Panel: Reposition the panel anywhere on the chart by dragging its header bar, collapse it into a compact status bar using the `MIN`/`MAX` button, trigger immediate manual rescans with `REFRESH`, or remove panel objects with `CLEAR`. Persistent UI coordinates and minimized states are preserved across timeframe changes via terminal global variables.

- Multi-Criteria Column Sorting: Click directly on the `PAIR`, `TF`, `DIR`, or `TIME` column headers to sort active rows in ascending or descending order.

- One-Click Chart Switching and Visual Overlays: Click the `OPEN` button on any signal row to switch the active chart to that symbol and timeframe automatically while drawing the signal arrow and horizontal Entry, SL, TP1, and TP2 reference lines.

- Multi-Channel Alert Engine: Supports MetaTrader pop-up dialogs, custom WAV audio alerts, MetaQuotes ID mobile push notifications, and SMTP email alerts with duplicate-alert suppression per closed bar.

Operation Recommendations and Terminal Optimization

- Recommended Instruments: Compatible with liquid Forex major pairs (`EURUSD`, `GBPUSD`, `USDJPY`, `AUDUSD`, `USDCAD`, `USDCHF`, `NZDUSD`), cross pairs (`EURJPY`, `GBPJPY`), precious metals (`XAUUSD`), and indices. Ensure symbol names in `InpSymbols` match your broker's exact Market Watch naming convention (including any broker prefix or suffix), or enable `InpUseWatch` to load active Market Watch symbols automatically.

- Recommended Timeframes: Supports all standard MetaTrader 4 timeframes (`M1`, `M5`, `M15`, `M30`, `H1`, `H4`, `D1`, `W1`, `MN1`). Timeframes `M5` to `H1` are suitable for intraday monitoring, while `H4` and `D1` are suited for broader swing structure tracking.

- Account and Execution Environment: Works on all MetaTrader 4 account types (Standard, ECN, Raw Spread, Hedging, and Netting) because the product operates strictly as a non-trading analytical scanner without placing orders. Verify broker spread conditions when evaluating reference levels on lower timeframes.

- CPU and Memory Efficiency Guidelines: Scanning numerous symbols and timeframes simultaneously requires historical bar data synchronization for each slot. To maintain responsive terminal performance on standard hardware, keep `InpMaxSymbols` at 15 or fewer, set `InpBarsCopy` between 120 and 200 bars, keep `InpScanSec` at 5 seconds or higher, and avoid running multiple heavy dashboard instances across several open charts simultaneously.

Graphical Interface Legend and Alert System

- Dashboard Color Coding: By default, bullish `BUY` directions and confirming oscillator readings are highlighted in green (`C'0,230,118'`), bearish `SELL` directions are highlighted in red (`C'255,82,82'`), titles and active sort indicators appear in cyan (`C'0,210,255'`), and inactive cells or status notes appear in muted gray (`C'120,128,140'`).

- On-Chart Visual Markers: When `InpDrawOnChart` is enabled, the chart displays a directional Wingdings arrow at the signal bar (`InpColArrowBuy` / `InpColArrowSell`), a dotted cyan Entry line, a dashed red Stop Loss line, and two dashed green Take Profit lines (`TP1` and `TP2`) with right-aligned price labels.

- Interactive Controls: `REFRESH` reloads symbols/timeframes and forces an immediate scan; `CLEAR` removes dashboard table objects from the screen; `MIN` / `MAX` toggles between full table view and compact header bar view; `OPEN` switches the chart symbol/period to inspect the selected signal.

- Alert Delivery Behavior: Each alert message includes the symbol, timeframe, direction, signal timestamp, Entry, SL, TP1, TP2, and current oscillator readings. When `InpAlertOnlyNew` is `true`, notifications fire strictly once per newly closed signal bar timestamp for each symbol-timeframe pair.

Input Parameters Documentation

Entry Strategy Selection (`InpSectionEntry`)

- `InpEntryMethod` (Default: `ENTRY_TDI_TRSI_CROSS_SIG_BASE`) - Selects the active crossover detection strategy from six available TDI and RSI modes.

- `InpDirection` (Default: `0`) - Restricts signal output direction (`0` = Both Buy and Sell, `1` = Buy signals only, `2` = Sell signals only).

- `InpLookback` (Default: `60`, Unit: bars) - Maximum number of closed historical bars searched backward from bar 1 to find the latest valid signal.

RSI Crossover Settings (`InpSectionRSI`)

- `InpRSI1Period` (Default: `7`, Unit: bars) - Calculation period for the fast RSI line in `ENTRY_RSI_CROSS` mode.

- `InpRSI1Applied` (Default: `PRICE_CLOSE`) - Applied price source used to calculate the fast RSI line.

- `InpRSI2Period` (Default: `21`, Unit: bars) - Calculation period for the slow RSI line in `ENTRY_RSI_CROSS` mode.

- `InpRSI2Applied` (Default: `PRICE_CLOSE`) - Applied price source used to calculate the slow RSI line.

TDI Settings (`InpSectionTDI`)

- `InpPeriodRSI` (Default: `13`, Unit: bars) - Base RSI lookback period used to construct the TDI oscillator.

- `InpAppliedPriceRSI` (Default: `PRICE_CLOSE`) - Applied price source for the base TDI RSI calculation.

- `InpPeriodVolBand` (Default: `34`, Unit: bars) - Moving average period used to compute the TDI Yellow Market Base line.

- `InpPeriodSmRSI` (Default: `2`, Unit: bars) - Smoothing period applied to the base RSI to generate the Green TRSI line.

- `InpMethodSmRSI` (Default: `MODE_SMA`) - Smoothing moving average method (`MODE_SMA` or `MODE_EMA`) for the Green TRSI line.

- `InpPeriodSmSig` (Default: `7`, Unit: bars) - Smoothing period applied to the base RSI to generate the Red Signal line.

- `InpMethodSmSig` (Default: `MODE_SMA`) - Smoothing moving average method (`MODE_SMA` or `MODE_EMA`) for the Red Signal line.

- `InpUseBaseFilter` (Default: `true`) - Requires Green TRSI to be above the Yellow Market Base line for Buy signals and below for Sell signals.

- `InpUseLevel50Filter` (Default: `true`) - Requires Green TRSI to be above level 50.0 for Buy signals and below level 50.0 for Sell signals.

Filter 1: RSI Cross Filter (`InpFilter1`)

- `Use_RSI_Cross_Filter` (Default: `false`) - Enables or disables secondary RSI oversold/overbought threshold crossover confirmation.

- `RSI_Length` (Default: `14`, Unit: bars) - Lookback period for the secondary RSI confirmation filter.

- `RSI_Price_Source` (Default: `PRICE_CLOSE`) - Applied price source for the secondary RSI confirmation filter.

- `RSI_Oversold` (Default: `30.0`, Unit: RSI level) - Lower threshold level that RSI must cross upward to validate bullish signals.

- `RSI_Overbought` (Default: `70.0`, Unit: RSI level) - Upper threshold level that RSI must cross downward to validate bearish signals.

Filter 2: ADX Trend Filter (`InpFilter2`)

- `Use_ADX_Filter` (Default: `false`) - Enables or disables trend strength filtering via Average Directional Index (ADX).

- `ADX_Period` (Default: `10`, Unit: bars) - Calculation period for the ADX main trend strength line.

- `ADX_Min_Level` (Default: `20.0`, Unit: ADX value) - Minimum ADX main value required to allow signal generation.

Filter 3: Single MA Filter (`InpFilter3`)

- `Use_MA_Filter` (Default: `false`) - Enables or disables price-versus-Moving-Average directional trend filtering.

- `MA_Period` (Default: `50`, Unit: bars) - Averaging period for the single Moving Average trend filter.

- `MA_Method` (Default: `MODE_SMA`) - Moving Average smoothing method (`MODE_SMA`, `MODE_EMA`, `MODE_SMMA`, `MODE_LWMA`).

- `MA_Shift` (Default: `0`, Unit: bars) - Horizontal bar shift applied to the single Moving Average line.

Filter 4: Ichimoku Senkou Span B Filter (`InpFilter4`)

- `Use_Ichimoku_Filter` (Default: `false`) - Enables or disables Ichimoku Kinko Hyo Senkou Span B cloud baseline filtering.

- `Ichimoku_Tenkan` (Default: `9`, Unit: bars) - Tenkan-sen (Conversion Line) calculation period.

- `Ichimoku_Kijun` (Default: `26`, Unit: bars) - Kijun-sen (Base Line) calculation period.

- `Ichimoku_SenkouB` (Default: `52`, Unit: bars) - Senkou Span B (Leading Span B) calculation period.

Filter 5: RSI 75 Filter (`InpFilter5`)

- `Use_RSI75_Filter` (Default: `false`) - Enables or disables long-period RSI 50.0 midline bias filtering.

- `RSI_Filter_Period` (Default: `75`, Unit: bars) - Lookback period for the long-term RSI midline filter.

Filter 6: Double MA Filter (`InpFilter6`)

- `Use_DoubleMA_Filter` (Default: `false`) - Enables or disables dual Moving Average trend alignment filtering (MA A vs MA B).

- `MA_A_Period` (Default: `30`, Unit: bars) - Calculation period for Fast Moving Average A.

- `MA_A_Method` (Default: `MODE_EMA`) - Smoothing method for Fast Moving Average A.

- `MA_A_Applied` (Default: `PRICE_CLOSE`) - Applied price source for Fast Moving Average A.

- `MA_A_Shift` (Default: `0`, Unit: bars) - Horizontal bar shift for Fast Moving Average A.

- `MA_B_Period` (Default: `140`, Unit: bars) - Calculation period for Slow Moving Average B.

- `MA_B_Method` (Default: `MODE_EMA`) - Smoothing method for Slow Moving Average B.

- `MA_B_Applied` (Default: `PRICE_CLOSE`) - Applied price source for Slow Moving Average B.

- `MA_B_Shift` (Default: `0`, Unit: bars) - Horizontal bar shift for Slow Moving Average B.

Filter 7: Awesome Oscillator Filter (`InpFilter7`)

- `Use_AO_Filter` (Default: `false`) - Master switch to enable or disable Bill Williams Awesome Oscillator (AO) filtering.

- `Use_AO_Volume_Filter` (Default: `false`) - Enables minimum positive and maximum negative AO histogram amplitude checks.

- `AO_Buy_Min` (Default: `4.0`, Unit: AO value) - Minimum AO value required to confirm Buy signals when amplitude filtering is active.

- `AO_Sell_Max` (Default: `-4.0`, Unit: AO value) - Maximum negative AO value required to confirm Sell signals when amplitude filtering is active.

- `Use_AO_Color_Filter` (Default: `false`) - Requires rising AO histogram bars for Buy and falling AO histogram bars for Sell.

- `Use_AO_Zero_Filter` (Default: `false`) - Requires AO to be above zero and rising for Buy, or below zero and falling for Sell.

Filter 8: Parabolic SAR Filter (`InpFilter8`)

- `Use_SAR_Filter` (Default: `false`) - Enables or disables Parabolic Stop and Reverse (SAR) price-position filtering.

- `SAR_Step` (Default: `0.02`, Unit: step increment) - Acceleration factor step increment for Parabolic SAR.

- `SAR_Maximum` (Default: `0.2`, Unit: max factor) - Maximum acceleration factor cap for Parabolic SAR.

Filter 9: Heiken Ashi Filter (`InpFilter9`)

- `Use_HeikenAshi_Filter` (Default: `false`) - Enables or disables Heiken Ashi candle body polarity confirmation (bullish for Buy, bearish for Sell).

Filter 10: CCI Trend Filter (`InpFilter10`)

- `Use_CCI_Filter` (Default: `false`) - Enables or disables Commodity Channel Index (CCI) zero-line directional filtering.

- `CCI_Period` (Default: `50`, Unit: bars) - Lookback period for the CCI zero-line trend filter.

- `CCI_Applied` (Default: `PRICE_CLOSE`) - Applied price source for the CCI zero-line trend filter.

Filter 11: CCI OB & OS Filter (`InpFilter11`)

- `Use_CCI_OBOS_Filter` (Default: `false`) - Enables or disables CCI momentum filtering beyond overbought and oversold threshold levels.

- `CCI_OBOS_Period` (Default: `14`, Unit: bars) - Lookback period for the CCI OB/OS filter.

- `CCI_OBOS_Applied` (Default: `PRICE_CLOSE`) - Applied price source for the CCI OB/OS filter.

- `CCI_Overbought` (Default: `100.0`, Unit: CCI level) - Upper CCI threshold level for bullish momentum validation.

- `CCI_Oversold` (Default: `-100.0`, Unit: CCI level) - Lower CCI threshold level for bearish momentum validation.

Filter 12: RVI Filters (`InpFilter12`)

- `Use_RVI_Filter` (Default: `false`) - Enables or disables Relative Vigor Index (RVI) zero-line directional filtering.

- `RVI_Period` (Default: `75`, Unit: bars) - Lookback period for the RVI zero-line trend filter.

- `Use_RVI_Signal_Filter` (Default: `false`) - Enables or disables RVI main-line versus signal-line alignment filtering.

- `RVI_Signal_Period` (Default: `20`, Unit: bars) - Lookback period for the RVI main/signal comparison filter.

Filter 13: MACD Filters (`InpFilter13`)

- `Use_MACD_Filter` (Default: `false`) - Enables or disables MACD histogram polarity filtering (main line above or below signal line).

- `MACD_FastEMA` (Default: `12`, Unit: bars) - Fast EMA period for the MACD calculation.

- `MACD_SlowEMA` (Default: `26`, Unit: bars) - Slow EMA period for the MACD calculation.

- `MACD_SignalSMA` (Default: `9`, Unit: bars) - Signal SMA period for the MACD calculation.

- `MACD_Applied` (Default: `PRICE_CLOSE`) - Applied price source for the MACD calculation.

- `Use_MACD_Zero_Filter` (Default: `false`) - Enables or disables MACD main-line zero-level regime filtering.

Filter 14: SR & Fibonacci Filters (`InpFilter14`)

- `Use_SR_Filter` (Default: `false`) - Enables or disables recent swing Support and Resistance proximity zone filtering.

- `SR_Period` (Default: `50`, Unit: bars) - Historical lookback window in bars used to locate Support and Resistance boundaries.

- `SR_Zone_Points` (Default: `80`, Unit: points) - Price tolerance buffer in points around Support/Resistance levels.

- `Use_Fib_Filter` (Default: `false`) - Enables or disables swing-anchored Fibonacci retracement zone filtering.

- `Fib_Level_1` (Default: `0.382`, Unit: ratio) - First Fibonacci retracement ratio boundary.

- `Fib_Level_2` (Default: `0.618`, Unit: ratio) - Second Fibonacci retracement ratio boundary.

- `ZigZag_Depth` (Default: `12`, Unit: bars) - Minimum bar depth used to identify swing highs and lows for Fibonacci anchoring.

- `ZigZag_Deviation` (Default: `5`, Unit: points) - Minimum price deviation in points between consecutive swing points.

- `ZigZag_Backstep` (Default: `3`, Unit: bars) - Minimum bar separation between consecutive swing highs or lows.

Filter 15: Supertrend Filter (`InpFilter15`)

- `Use_Supertrend_Filter` (Default: `false`) - Enables or disables ATR-based Supertrend directional regime filtering.

- `ST_AtrPeriod` (Default: `10`, Unit: bars) - Wilder ATR lookback period for the Supertrend volatility band calculation.

- `ST_Factor` (Default: `3.0`, Unit: multiplier) - ATR band multiplier factor governing Supertrend sensitivity.

Scanner Settings (`InpSectionScanner`)

- `InpSymbols` (Default: `"EURUSD,GBPUSD,USDJPY,AUDUSD,USDCAD,USDCHF,NZDUSD,EURJPY,GBPJPY,XAUUSD"`) - Comma-separated list of instruments to scan when `InpUseWatch` is `false`.

- `InpTimeframes` (Default: `"M5,M15,M30,H1,H4"`) - Comma-separated list of chart timeframes scanned for each symbol.

- `InpUseWatch` (Default: `true`) - Scans visible instruments directly from the MT4 Market Watch list up to `InpMaxSymbols`.

- `InpMaxSymbols` (Default: `15`, Unit: symbols) - Maximum number of symbols scanned simultaneously to optimize CPU load.

- `InpScanSec` (Default: `7`, Unit: seconds) - Background timer interval in seconds between automatic multi-pair scans (minimum 2 seconds).

- `InpBarsCopy` (Default: `150`, Unit: bars) - Number of historical bars copied per symbol and timeframe during each scan pass.

ATR SL & TP Settings (`InpSectionATR`)

- `InpATRPeriod` (Default: `14`, Unit: bars) - ATR calculation period used to size volatility-based Stop Loss and Take Profit levels.

- `InpATRMultSL` (Default: `1.5`, Unit: multiplier) - ATR multiplier applied to determine Stop Loss distance from the signal entry price.

- `InpTP1_RR` (Default: `1.0`, Unit: Risk:Reward ratio) - Risk-to-Reward multiplier relative to Stop Loss distance for Take Profit Target 1.

- `InpTP2_RR` (Default: `2.0`, Unit: Risk:Reward ratio) - Risk-to-Reward multiplier relative to Stop Loss distance for Take Profit Target 2.

Alert Notifications (`InpSectionAlert`)

- `InpAlertPopup` (Default: `true`) - Enables or disables MetaTrader pop-up alert windows on new signal detection.

- `InpAlertSound` (Default: `true`) - Enables or disables audible WAV alert playback on new signal detection.

- `InpSoundFile` (Default: `"alert.wav"`) - Audio filename located inside the MetaTrader `Sounds` directory.

- `InpAlertPush` (Default: `false`) - Enables or disables mobile push notifications via MetaQuotes ID.

- `InpAlertEmail` (Default: `false`) - Enables or disables email notifications via the terminal SMTP configuration.

- `InpEmailSubject` (Default: `"Scanner Dashboard Signal"`) - Prefix text inserted into the subject line of outgoing alert emails.

- `InpAlertOnlyNew` (Default: `true`) - Restricts alerts to newly closed signal bar timestamps to prevent repeated notifications.

Dashboard Display (`InpSectionDisplay`)

- `InpX` (Default: `15`, Unit: pixels) - Initial horizontal X-coordinate offset of the dashboard from the upper-left chart corner.

- `InpY` (Default: `25`, Unit: pixels) - Initial vertical Y-coordinate offset of the dashboard from the upper-left chart corner.

- `InpScale` (Default: `100`, Unit: percentage, range `70`–`180`) - Global UI scaling percentage for High-DPI displays.

- `InpRowH` (Default: `18`, Unit: pixels) - Height of each individual signal row in the dashboard table.

- `InpFont` (Default: `8`, Unit: points) - Base font size used for table labels and headers.

- `InpPadX` (Default: `8`, Unit: pixels) - Left and right horizontal padding inside the dashboard frame.

- `InpWPair` (Default: `68`, Unit: pixels) - Width of the `PAIR` symbol column.

- `InpWTF` (Default: `34`, Unit: pixels) - Width of the `TF` timeframe column.

- `InpWArah` (Default: `44`, Unit: pixels) - Width of the `DIR` signal direction column.

- `InpWTime` (Default: `96`, Unit: pixels) - Width of the `TIME` signal timestamp column.

- `InpWEntry` (Default: `62`, Unit: pixels) - Width of the `ENTRY` reference price column.

- `InpWSL` (Default: `60`, Unit: pixels) - Width of the `SL` Stop Loss reference column.

- `InpWTP1` (Default: `60`, Unit: pixels) - Width of the `TP 1` first target reference column.

- `InpWTP2` (Default: `60`, Unit: pixels) - Width of the `TP 2` second target reference column.

- `InpWOsc1` (Default: `40`, Unit: pixels) - Width of the primary oscillator readout column (`TRSI` or `RSI I`).

- `InpWOsc2` (Default: `40`, Unit: pixels) - Width of the secondary oscillator readout column (`SIG`, `BASE`, or `RSI II`).

- `InpWUmur` (Default: `42`, Unit: pixels) - Width of the `AGE` signal elapsed-time column.

- `InpWOpen` (Default: `44`, Unit: pixels) - Width of the `OPEN` chart-switching button column.

- `InpShowEmpty` (Default: `false`) - Displays rows for scanned symbol-timeframe pairs that currently have no active signal.

- `InpMaxRows` (Default: `16`, Unit: rows) - Maximum number of visible signal rows rendered in the dashboard table.

Sorting (`InpSectionSort`)

- `InpSortBy` (Default: `SORT_TIME`) - Initial column sorting mode (`SORT_TIME`, `SORT_PAIR`, `SORT_TF`, or `SORT_DIR`).

- `InpSortNewest` (Default: `true`) - Initial sort ordering (`true` = descending/newest first, `false` = ascending/oldest first).

Chart Visualization (`InpSectionVisual`)

- `InpDrawOnChart` (Default: `true`) - Enables or disables automatic plotting of the active chart's latest valid signal overlay.

- `InpShowArrow` (Default: `true`) - Toggles visibility of directional Buy/Sell Wingdings arrows on the signal candle.

- `InpShowLevels` (Default: `true`) - Toggles visibility of horizontal Entry, SL, TP1, and TP2 reference trendlines and labels.

- `InpExtendBars` (Default: `25`, Unit: bars) - Number of bars forward to extend horizontal Entry, SL, and TP reference lines.

- `InpArrowCodeBuy` (Default: `233`, Unit: Wingdings code) - Wingdings symbol code used for bullish Buy signal arrows.

- `InpArrowCodeSell` (Default: `234`, Unit: Wingdings code) - Wingdings symbol code used for bearish Sell signal arrows.

- `InpArrowSize` (Default: `2`, Unit: width `1`–`5`) - Size thickness of plotted directional arrows.

- `InpArrowDistance` (Default: `15`, Unit: points) - Vertical offset in points separating signal arrows from the candle price.

Color Palette (`InpSectionColors`)

- `InpColBg` (Default: `C'18,22,28'`) - Outer container background color of the dashboard panel.

- `InpColHead` (Default: `C'32,38,48'`) - Background color for the header bar, column titles, and `OPEN` buttons.

- `InpColRow` (Default: `C'24,28,36'`) - Background color for even-numbered signal rows.

- `InpColRow2` (Default: `C'28,33,42'`) - Alternating background color for odd-numbered signal rows.

- `InpColText` (Default: `C'220,225,230'`) - Primary text color for symbols, timeframes, timestamps, and entry prices.

- `InpColBull` (Default: `C'0,230,118'`) - Accent text color for bullish `BUY` signals and bullish oscillator readings.

- `InpColBear` (Default: `C'255,82,82'`) - Accent text color for bearish `SELL` signals and bearish oscillator readings.

- `InpColMute` (Default: `C'120,128,140'`) - Muted text color for status text, inactive cells, and footer instructions.

- `InpColAccent` (Default: `C'0,210,255'`) - Highlight color for the panel title, active sort header, and `OPEN` button labels.

- `InpColArrowBuy` (Default: `C'0,230,118'`) - Color of bullish Buy arrows plotted on the price chart.

- `InpColArrowSell` (Default: `C'255,82,82'`) - Color of bearish Sell arrows plotted on the price chart.

- `InpColEntry` (Default: `C'0,210,255'`) - Color of the Entry reference line and label on the chart.

- `InpColSL` (Default: `C'255,82,82'`) - Color of the Stop Loss reference line, chart label, and dashboard `SL` column.

- `InpColTP1` (Default: `C'0,200,83'`) - Color of the Take Profit 1 reference line, chart label, and dashboard `TP 1` column.

- `InpColTP2` (Default: `C'0,230,118'`) - Color of the Take Profit 2 reference line, chart label, and dashboard `TP 2` column.

Risk Disclaimer

Trading foreign exchange, commodities, indices, and other financial instruments carries a high level of risk and may not be suitable for all investors. Past performance and historical signal behavior do not guarantee future results. This software is an analytical technical indicator and visual dashboard scanner designed solely to assist with market monitoring; it does not execute trades automatically or guarantee financial profit. Always test and evaluate the indicator thoroughly on a demo account to understand its operational behavior before using it to inform live trading decisions.

Otros productos de este autor
Descripción general MACD Signal with Multi Filters es un indicador avanzado de análisis técnico diseñado para MetaTrader 5 (MT5). El software combina la arquitectura clásica del oscilador de convergencia y divergencia de medias móviles (MACD) con un motor de confirmación modular de 14 filtros (MultiFilterSuite). Se ha desarrollado para ayudar a los operadores manuales, a los analistas cuantitativos y a los desarrolladores de sistemas algorítmicos a identificar cambios de impulso, continuaciones
Sistema de filtros múltiples SAR parabólico para MT5: motor algorítmico de inversión de tendencia 1. DESCRIPCIÓN GENERAL DEL PRODUCTO Y ARQUITECTURA OPERATIVA El sistema de filtrado múltiple Parabolic SAR para MT5 es un indicador profesional de análisis técnico multicomponente diseñado para la plataforma MetaTrader 5. El indicador combina el clásico sistema parabólico de tiempo y precio de J. Welles Wilder con una avanzada arquitectura de filtrado modular que comprende 17 motores de validación
Hull Trend Arrows MT5 con Multi-Filter Suite - Documentación técnica 1. Descripción general y finalidad analítica Hull Trend Arrows MT5 con Multi-Filter Suite es un indicador técnico algorítmico para MetaTrader 5. Integra el motor de cálculo de bajo retraso de la media móvil de Hull (HMA) con catorce filtros de confirmación modulares para identificar transiciones de impulso direccional, calcular puntos de inflexión y mostrar señales de entrada que no se repintan en el gráfico. Las medias móvile
FREE
Descripción general del producto: Sistema técnico multifiltro del Índice de Vigor Relativo El indicador multifiltro del Índice de Vigor Relativo (RVI) es un completo motor de análisis técnico desarrollado para la plataforma MetaTrader 5. Diseñado para identificar cambios cíclicos en el impulso, continuaciones de tendencias y puntos de inflexión estructurales del mercado, este sistema analítico combina la fórmula clásica del Índice de Vigor Relativo con una avanzada matriz de confirmación de múlt
FREE
HA Signal MultiFilter MT5 - Manual técnico de funcionamiento y guía de arquitectura 1. DESCRIPCIÓN GENERAL DEL SISTEMA Y FUNDAMENTOS ARQUITECTONICOS HA Signal MultiFilter MT5 es un indicador analítico especializado desarrollado para la plataforma MetaTrader 5 con el fin de identificar expansiones del impulso direccional y continuaciones de tendencias estructurales [cita: 2]. Mediante la síntesis del descubrimiento de precios de las velas Heiken Ashi suavizadas con un conjunto modular de filtros
FREE
1. DESCRIPCIÓN GENERAL Harmonic Dashboard es un indicador analítico especializado, compatible con múltiples símbolos y marcos temporales, diseñado para MetaTrader 5 (MT5). El software analiza sistemáticamente los instrumentos financieros en múltiples marcos temporales para identificar seis patrones armónicos clásicos en los gráficos: Gartley, Bat, Butterfly, Crab, Cypher y Shark. La aplicación consolida los resultados del escáner de múltiples activos, las métricas de validación de filtros de t
Descripción general MA Cross Scanner Pro es un panel de análisis avanzado y altamente optimizado, capaz de gestionar múltiples símbolos y marcos temporales, diseñado específicamente para la plataforma MetaTrader 5. Pensado para analistas técnicos, operadores sistémicos e investigadores cuantitativos, esta herramienta actúa como un completo motor de vigilancia del mercado. Su objetivo principal es supervisar de forma continua y simultánea una selección personalizada de instrumentos financieros e
CCI MultiFilter: Señal de sobrecompra y sobreventa Pro para MT5 Especificaciones técnicas y manual de funcionamiento 1. Descripción general e identificación del sistema CCI MultiFilter Overbought Oversold Signal Pro MT5 es un indicador de análisis técnico de nivel institucional diseñado específicamente para MetaTrader 5. Desarrollado para analistas cuantitativos, operadores manuales sistemáticos y operadores de múltiples activos, el sistema proporciona un marco algorítmico objetivo para identif
Panel de control del escáner de intervalos de tiempo para todos los pares de WPR (Williams Percent Range) Descripción general WPR Scanner Dashboard Pro es un indicador de análisis de mercado para múltiples símbolos y marcos temporales, así como una utilidad de superposición visual de gráficos, diseñado para MetaTrader 4 (MT4). La herramienta supervisa el agotamiento del impulso del Rango porcentual de Williams (WPR) y las rupturas de umbrales en múltiples pares de divisas, metales, índices y C
Escáner WAE Waddah Attar Explosion Multi Pair TimeFrame 1. Descripción general - El panel de control del escáner WAE es un indicador de análisis técnico y un escáner de mercado multisímbolo y multiperíodo de tiempo diseñado para MetaTrader 4 (MT4). - Automatiza la supervisión de múltiples gráficos mediante el escaneo de rupturas de impulso impulsadas por la volatilidad, basadas en la metodología Waddah Attar Explosion (WAE), en múltiples pares de divisas, cruces, índices o metales de forma sim
Panel de control de análisis de múltiples pares y marcos temporales de UT Bot Trend Descripción general El panel de control del escáner UT Bot es un indicador técnico y un escáner de mercado multipares y multiperíodos desarrollado de forma nativa para MetaTrader 4 (MT4). Supervisa de forma continua y simultánea los pares de divisas, metales preciosos, índices o símbolos activos de la lista «Market Watch» seleccionados en múltiples períodos de tiempo para detectar cruces dinámicos de stop dinámi
Panel de control del escáner estocástico para MetaTrader 4 Panel de control del escáner estocástico de sobrecompra y sobreventa: todos los pares y marcos temporales Descripción general - El panel de control del escáner estocástico es un indicador de análisis técnico y un escáner de mercado para múltiples símbolos y marcos temporales, diseñado para MetaTrader 4 (MT4). - La herramienta supervisa continuamente los pares de divisas, metales o símbolos de la Lista de mercado definidos por el usuario
Panel de control del escáner de tendencias de canales SSL: múltiples pares y múltiples marcos temporales Descripción general El panel de control «SSL Channel Multi-Filter» es un indicador de análisis técnico y un escáner de mercado para múltiples símbolos y marcos temporales, diseñado para MetaTrader 4. Supervisa de forma continua múltiples pares de divisas, materias primas u otros instrumentos de los brókers en los marcos temporales seleccionados por el usuario, con el fin de detectar cruces di
Cuadro de mando del escáner del Índice de Vigor Relativo (RVI) para todos los pares y marcos temporales Descripción general El panel de control del escáner RVI es un indicador técnico y un panel de escáner interactivo para múltiples pares y marcos temporales de MetaTrader 4 (MT4). Basado en el oscilador del Índice de Vigor Relativo (RVI), supervisa continuamente múltiples pares de divisas, materias primas o índices en los marcos temporales seleccionados desde una única ventana de gráfico. La h
Escáner de sobrecompra y sobreventa parabólica del RSI para múltiples pares y marcos temporales 1. Descripción general - El panel de control del escáner parabólico RSI es un indicador de análisis técnico para múltiples símbolos y marcos temporales, así como un escáner de mercado en tiempo real, diseñado para MetaTrader 4 (MT4). - Supervisa de forma continua los pares de divisas, metales o instrumentos visibles en la ventana «Market Watch» definidos por el usuario en múltiples marcos temporales
Panel de control para el análisis de divergencias del RSI en múltiples pares y marcos temporales Descripción general - Tipo de producto: Indicador de análisis técnico para múltiples símbolos y marcos temporales, y escáner interactivo de símbolos del mercado para MetaTrader 4 (MT4). - Objetivo principal: Supervisa de forma continua y simultánea los pares de divisas, metales preciosos, índices o símbolos activos de la lista «Market Watch» configurados en múltiples marcos temporales de los gráfico
Descripción general - Identificación del producto: Pola MultiCandle Scanner Dashboard es un indicador de análisis técnico y un escáner de mercado para múltiples pares y marcos temporales, desarrollado para MetaTrader 4 (MT4). - Objetivo principal: Supervisa de forma continua los pares de divisas, metales preciosos o instrumentos de Market Watch definidos por el usuario en múltiples marcos temporales para detectar formaciones estructuradas de acción del precio en múltiples velas, validar configu
Escáner de cruces de tendencia de la señal MACD: panel de control para todos los pares Descripción general El panel de control del escáner MACD es una herramienta de análisis técnico y un indicador de panel de control multisímbolo y multiperíodo de tiempo diseñado para MetaTrader 4[cite: 1]. Su objetivo principal es supervisar simultáneamente los cruces de la MACD en múltiples pares de divisas y períodos de tiempo de los gráficos desde una única ventana de gráfico activa[cite: 1]. En lugar de t
Panel de control de MA Moving Average Cross Scanner para todos los pares y marcos temporales Descripción general El MA Cross Scanner es un indicador técnico analítico para múltiples símbolos y marcos temporales, equipado con un panel de control interactivo integrado en el gráfico para MetaTrader 4[cite: 1]. La herramienta está diseñada para supervisar simultáneamente los cruces de medias móviles (MA) en múltiples pares de divisas y marcos temporales, consolidando la detección de señales, el fil
Escáner de cruces de Tenkan y Kijun de Ichimoku para todos los pares y todos los marcos temporales Descripción general TK Cross Scanner Dashboard es un indicador de análisis técnico y un escáner de mercados multiactivos diseñado para la plataforma MetaTrader 4. Esta herramienta supervisa simultáneamente múltiples pares de divisas, materias primas y marcos temporales para detectar cruces entre las líneas Tenkan-sen y Kijun-sen de Ichimoku (TK Cross). Además del escaneo automatizado de señales, e
Escáner de Ichimoku Senkou Span B para todos los pares y todos los marcos temporales Descripción general El panel de control del escáner de Senkou Span B para MT4 es un indicador de análisis técnico y un escáner de mercados multiactivos diseñado para MetaTrader 4. La herramienta supervisa simultáneamente múltiples pares de divisas, materias primas y marcos temporales desde una única ventana de gráfico para detectar interacciones de precios con el límite del Senkou Span B del Ichimoku Kinko Hyo.
Panel de control de análisis de marcos temporales de pares de divisas con Heiken Ashi Descripción general El panel de control «Escáner de múltiples marcos temporales de Heiken Ashi» es una herramienta de análisis técnico y un escáner de mercado multisímbolo y multimarco temporal desarrollado para la plataforma MetaTrader 4. La herramienta está diseñada para supervisar simultáneamente múltiples pares de divisas, materias primas o índices desde una única ventana de gráfico. En lugar de tener que
Panel de control «Pro Harmonic Pattern Scanner» para todos los pares y marcos temporales El panel de control del escáner de patrones armónicos para MT4 es un indicador técnico analítico multisímbolo y multiperíodo de tiempo diseñado para MetaTrader 4. Analiza automáticamente la evolución de los precios en los pares de divisas, metales o instrumentos de «Market Watch» seleccionados para identificar estructuras armónicas clásicas XABCD, calcular las zonas de entrada, stop loss y take profit basad
Panel de control de múltiples pares y marcos temporales con escáner de rupturas fractales Descripción general El panel de control del escáner de rupturas fractales es un indicador de análisis técnico y una herramienta de escaneo de múltiples símbolos y marcos temporales diseñada para MetaTrader 4. La herramienta supervisa simultáneamente múltiples pares de divisas, materias primas e índices para detectar rupturas de precios más allá de los máximos y mínimos de oscilación fractales confirmados d
Escáner institucional de patrones de velas «Engulfing» para todos los pares y marcos temporales El panel de control «Engulfing Scanner» es una herramienta de análisis técnico y un escáner de patrones de velas japonesas para múltiples símbolos y marcos temporales en MetaTrader 4. Detecta configuraciones de «engulfing» alcistas y bajistas en múltiples pares de divisas y marcos temporales simultáneamente, mostrando las señales activas en una tabla interactiva integrada en el gráfico junto con los
Escáner de velas de rechazo «Pinbar Marubozu» para todos los pares y marcos temporales Descripción general El panel de control «Candle Pattern Scanner» es una herramienta de análisis técnico y un indicador de escáner para múltiples pares y marcos temporales, diseñado para MetaTrader 4. El indicador supervisa continuamente múltiples pares de divisas, materias primas o índices en los marcos temporales seleccionados para detectar formaciones específicas de la acción del precio en velas japonesas,
Panel de control del escáner del oscilador de Chaikin para todos los pares y marcos temporales Descripción general El panel de control del escáner del oscilador de Chaikin es una herramienta de análisis técnico y un escáner de mercado multisímbolo y multiperíodo de tiempo diseñado para MetaTrader 4 (MT4)[cite: 1]. El indicador supervisa simultáneamente múltiples pares de divisas, materias primas o índices en los marcos temporales seleccionados de los gráficos para identificar eventos de cruce d
Escáner de tendencias, sobrecompra y sobreventa con CCI para todos los pares y marcos temporales: panel de control El panel de control del escáner CCI para múltiples marcos temporales es una herramienta de análisis técnico y un escáner de mercado para múltiples símbolos desarrollado para MetaTrader 4. El indicador supervisa simultáneamente múltiples pares de divisas y marcos temporales utilizando cálculos del Índice del Canal de Materias Primas (CCI), combinados con un conjunto opcional de con
Escáner de rupturas de bandas de Bollinger para todos los pares y marcos temporales El panel de control del escáner de rupturas de las bandas de Bollinger es una herramienta de análisis técnico y un escáner de mercado multisímbolo y multiperíodo de tiempo diseñado para MetaTrader 4 (MT4). El software supervisa continuamente múltiples pares de divisas, materias primas o índices en los periodos de tiempo definidos por el usuario para detectar configuraciones confirmadas de ruptura de las bandas d
Panel de control del escáner de tendencias ADX para múltiples pares y marcos temporales Descripción general: ADX Scanner Dashboard Pro es un indicador de análisis técnico y un escáner de mercado para múltiples símbolos y marcos temporales, diseñado para la plataforma MetaTrader 4. El software supervisa de forma continua el movimiento direccional del Índice Directional Promedio (ADX) en los instrumentos financieros y los periodos de gráfico seleccionados por el usuario de forma simultánea. Todas
Filtro:
No hay comentarios
Respuesta al comentario