Fast Copy For Multi Signal Multi Accounts MT5
68 USD
Demo indirildi:
265
Yayınlandı:
26 Ekim 2020
Mevcut sürüm:
20.9
Uygun bir robot bulamadınız mı?
Freelance üzerinden kendi
robotunuzu sipariş edin
Freelance'e git
Freelance üzerinden kendi
robotunuzu sipariş edin
Bir alım-satım robotu veya gösterge nasıl satın alınır?
Uzman Danışmanınızı
sanal sunucuda çalıştırın
sanal sunucuda çalıştırın
Satın almadan önce göstergeyi/alım-satım robotunu test edin
Mağazada kazanç sağlamak ister misiniz?
Satış için bir ürün nasıl sunulur?
Alım-satım fırsatlarını kaçırıyorsunuz:
- Ücretsiz alım-satım uygulamaları
- İşlem kopyalama için 8.000'den fazla sinyal
- Finansal piyasaları keşfetmek için ekonomik haberler
Kayıt
Giriş yap
Gizlilik ve Veri Koruma Politikasını ve MQL5.com Kullanım Şartlarını kabul edersiniz
Hesabınız yoksa, lütfen kaydolun
操作演示
VIDEO:https://youtu.be/ZbCyybG9JSc
Why can't I install it on MT4, MT5 doesn't cause any problems
Can you take a screenshot of the error code reported?
I just bought mt5 version fast copy
how to copy mt5 to mt4 ?
I just bought mt5 version fast copy
You need an MT4 version, and their data is interoperable, but the MT5 version of EA can only run on MT5.
https://www.mql5.com/en/market/product/56510
hello brother... I can no longer use the MT5 version of the product I bought, last week it was still usable but after I changed the master account number, the recipient of the old account didn't copy the new account even though it had been set up correctly. I deleted it and installed it again but it's still the same sorry my english is not good
hello brother... I can no longer use the MT5 version of the product I bought, last week it was still usable but after I changed the master account number, the recipient of the old account didn't copy the new account even though it had been set up correctly. I deleted it and installed it again but it's still the same sorry my english is not good
You can take a screenshot to see your situation
信號源賬戶有三個，但是其中兩個已經是不會再用的了，如何刪除？
信號源賬戶有三個，但是其中兩個已經是不會再用的了，如何刪除？
如果信号没有在使用,将会在一周后失效,但是想要它在列表上消失你只需要点一下刷新按钮.
賬號已經沒有在使用，我刷新了幾次他都無法消失。
一周后刷新.
Can you fix it so that it can send at Extreme speeds to copy fast scalping? (receiving side also needs to be Extreme)
Right now it freezes when sending at Extreme.
This problem has failed on both MT4 and MT5.Can you fix it so that it can send at Extreme speeds to copy fast scalping? (receiving side also needs to be Extreme)
Right now it freezes when sending at Extreme.
This problem has failed on both MT4 and MT5.Do you mean that this situation might occur if you choose Extreme Speed?
Do you mean that this situation might occur if you choose Extreme Speed?
Yes, that's right.
Yes, that's right.
OK
我設置了過濾表, [Elise-EA]-1 已經過濾掉了，沒有跟單,從[Elise-EA]-2開始跟單, 到了[Elise-EA]-9沒有問題, 但是把[Elise-EA]-10, [Elise-EA]-11, [Elise-EA]-12 也過濾掉了，沒有跟單，我只想過濾1號單，2~20的單我都想跟，怎麼可以解決這個問題？
我設置了過濾表, [Elise-EA]-1 已經過濾掉了，沒有跟單,從[Elise-EA]-2開始跟單, 到了[Elise-EA]-9沒有問題, 但是把[Elise-EA]-10, [Elise-EA]-11, [Elise-EA]-12 也過濾掉了，沒有跟單，我只想過濾1號單，2~20的單我都想跟，怎麼可以解決這個問題？
我設置了過濾表, [Elise-EA]-1 已經過濾掉了，沒有跟單,從[Elise-EA]-2開始跟單, 到了[Elise-EA]-9沒有問題, 但是把[Elise-EA]-10, [Elise-EA]-11, [Elise-EA]-12 也過濾掉了，沒有跟單，我只想過濾1號單，2~20的單我都想跟，怎麼可以解決這個問題？
Version 20.9 , 输入 /[[Elise-EA]-1] 可以精确过滤
Firstly thank you for this Copier, it is Great!.
I am copying from mostly a 100k Master to 100k Slaves at a 0.1x multiplier and that is all fine.
When copying from the 100k Master to the 10k Slave I get errors on some strategies.
Root Cause
The EA/copier is trying to modify the SL to 1.09594 immediately after opening, but:
Either the SL is still too close to the entry price (within 3 pips), or
The SL is being set with a calculation bug (could be an old value, or using an incorrect price), or
The attempt is made with 0 for TP, which is generally fine, but the SL calculation is not respecting the required minimum.
Symbol “Stops level” Recap
You must set any SL/TP at least 30 points (0.00030) away from current price!
Q. “Does the copier auto-adjust SL/TP on the slave to meet broker Stops Level? If not, can you add this please?”
Firstly thank you for this Copier, it is Great!.
I am copying from mostly a 100k Master to 100k Slaves at a 0.1x multiplier and that is all fine.
When copying from the 100k Master to the 10k Slave I get errors on some strategies.
Root Cause
The EA/copier is trying to modify the SL to 1.09594 immediately after opening, but:
Either the SL is still too close to the entry price (within 3 pips), or
The SL is being set with a calculation bug (could be an old value, or using an incorrect price), or
The attempt is made with 0 for TP, which is generally fine, but the SL calculation is not respecting the required minimum.
Symbol “Stops level” Recap
You must set any SL/TP at least 30 points (0.00030) away from current price!
Q. “Does the copier auto-adjust SL/TP on the slave to meet broker Stops Level? If not, can you add this please?”
Hello, thanks for the feedback question, there is actually an automatic adjustment algorithm for sl, but the actual operation still cannot be set There may be other influencing factors.