WAE Waddah Attar Explosion Volatility Multi Filter

WAE Waddah Attar Explosion Volatility Multi Filter

Overview

Waddah Attar Explosion Multi Filter is a technical analysis indicator for MetaTrader 4 that integrates momentum and volatility expansion measurement with a modular 15-filter confirmation suite and automated ATR-based price level projections. Built for structured trend-following and breakout analysis, the indicator plots a dual-color momentum histogram alongside dynamic volatility and dead-zone thresholds in a dedicated sub-window, while displaying directional entry arrows and risk-reward reference lines directly on the main price chart.

Operating Principle and Signal Logic
The indicator evaluates market momentum by tracking directional shifts in MACD values relative to volatility expansion derived from Bollinger Bands width, filtered against a minimum Dead Zone threshold to separate valid breakouts from low-volume market noise.
- Bullish Signal (Buy): Generated on a completed candle when bullish histogram momentum expands above both the Explosion Line and the Dead Zone threshold, validated by optional momentum acceleration checks and all enabled modules in the 15-filter framework.
- Bearish Signal (Sell): Generated on a completed candle when bearish histogram momentum expands above both the Explosion Line and the Dead Zone threshold, validated by optional momentum acceleration checks and all enabled modules in the 15-filter framework.
- Repainting Behavior and Bar Calculation: All entry arrows, alert triggers, and Stop Loss or Take Profit projections are evaluated strictly on closed candles (Bar 1 and historical completed bars). Once a candle closes and a signal arrow is rendered on the chart, it does not repaint, disappear, or shift position. The sub-window histogram and lines on the active candle (Bar 0) update dynamically in real time with incoming ticks until the candle closes. Note that if the optional Fibonacci Retracement filter is enabled, internal swing detection relies on ZigZag peak-and-trough confirmation.

Visual Interface and Chart Elements
To provide clear visual interpretation without chart clutter, the indicator separates oscillator diagnostics from price action references across two chart zones:
- Sub-Window Bullish Histogram (Default: Lime): Indicates positive directional momentum expansion when the current momentum reading is above zero.
- Sub-Window Bearish Histogram (Default: Magenta): Indicates negative directional momentum expansion when the current momentum reading is below zero.
- Sub-Window Explosion Line (Default: Aqua): Represents dynamic market volatility width calculated from Bollinger Bands; momentum bars exceeding this line signify a volatility breakout condition.
- Sub-Window Dead Zone Line (Default: Red Dash-Dot): Represents the minimum baseline threshold required to filter out flat, low-volatility consolidation phases.
- Main Chart Directional Arrows (Default: Aqua for Buy, Red for Sell): Plotted below candle lows for confirmed bullish breakouts and above candle highs for confirmed bearish breakouts.
- Main Chart ATR Target Projections: Displays horizontal reference segments with right-aligned price labels for Entry (Gold), Stop Loss (Red), TP1 at 1R (Lime Green), TP2 at 2R (Medium Sea Green), and TP3 at 3R (Dodger Blue) exclusively for the most recent confirmed signal to keep historical chart views clean.

Modular 15-Filter Confirmation Architecture
Traders can activate any single filter or combine multiple filters simultaneously using strict logical conjunction (all active filters must agree before a signal is plotted):
- 1. RSI Cross Filter: Requires the Relative Strength Index to cross upward from the oversold zone for Buy signals or downward from the overbought zone for Sell signals.
- 2. ADX Trend Filter: Verifies that the Average Directional Index main line is above a user-defined minimum level, ensuring sufficient directional trend strength.
- 3. Single MA Filter: Confirms structural trend alignment by requiring price closure above a configurable Moving Average for Buy setups and below it for Sell setups.
- 4. Ichimoku Senkou Span B Filter: Uses the leading Senkou Span B cloud boundary as a long-term equilibrium baseline to allow Buy signals only above the cloud boundary and Sell signals below it.
- 5. RSI 75 Midline Filter: Applies a long-period RSI filter around the 50.0 neutral equilibrium level to align entries with broader macro momentum bias.
- 6. Double MA Filter: Evaluates trend alignment between a faster Moving Average and a slower Moving Average, permitting Buy signals during bullish alignment and Sell signals during bearish alignment.
- 7. Awesome Oscillator (AO) Filter: Offers three independent confirmation sub-modes checking minimum AO amplitude thresholds, bar-over-bar histogram slope direction, and zero-line polarity.
- 8. Parabolic SAR Filter: Validates trend direction by checking whether closing price resides above the Parabolic SAR trail for Buy signals or below it for Sell signals.
- 9. Heiken Ashi Filter: Computes internal smoothed Heiken Ashi candles to ensure bullish candle polarity (close above open) for Buy entries and bearish polarity (close below open) for Sell entries.
- 10. CCI Trend Filter: Uses a medium-term Commodity Channel Index relative to the zero line to confirm positive or negative cyclical momentum bias.
- 11. CCI OB and OS Filter: Evaluates short-term CCI momentum breakouts beyond configured overbought and oversold threshold levels.
- 12. RVI Trend and Signal Filters: Combines a long-period Relative Vigor Index zero-line regime check with a shorter-period RVI main-versus-signal line crossover alignment.
- 13. MACD Histogram and Zero Filters: Adds a secondary independent MACD confirmation layer checking both histogram polarity and main-line position relative to the zero level.
- 14. Support/Resistance and Fibonacci Filters: Evaluates price interaction near recent structural swing highs/lows within a defined point tolerance, alongside optional Fibonacci retracement zone validation derived from internal swing points.
- 15. Supertrend Filter: Integrates an ATR-based Supertrend regime algorithm using Wilder smoothing to permit Buy signals strictly during bullish regimes and Sell signals strictly during bearish regimes.

Key Technical Features and Resource Efficiency
- Automated Risk-to-Reward Mapping: Eliminates manual pip calculation by projecting Entry, Stop Loss, and three scaled Take Profit targets (1R, 2R, 3R) immediately upon signal confirmation using live ATR volatility.
- Multi-Channel Alert Routing: Supports terminal pop-up dialog alerts, customizable WAV audio alerts for Buy and Sell events, mobile push notifications via MetaQuotes ID, and SMTP email alerts, triggered once per closed bar to prevent duplicate alert spam.
- Optimized Computation Engine: Employs incremental bar calculation on live market ticks and single-pass historical buffer initialization. Internal series arrays for Heiken Ashi and Supertrend are updated efficiently without creating external chart object overhead, maintaining responsive terminal performance when running across multiple currency pairs.

Operation, Setup, and Calibration Recommendations
- Supported Instruments: Suitable for major and minor Forex pairs (such as EURUSD, GBPUSD, USDJPY, AUDUSD), metals and commodities (such as XAUUSD), stock indices, and liquid cryptocurrencies.
- Recommended Timeframes: Operates on all standard MetaTrader 4 timeframes from M1 to MN1. Timeframes M15, M30, H1, and H4 are recommended for balanced signal frequency and structural trend reliability. Lower timeframes (M1, M5) require stricter filter combinations to reduce intraday noise.
- Parameter Calibration Guide: Because DeadZonePip and ArrowOffsetPips are scaled in broker points/pips, adjust DeadZonePip according to the average pip range of the selected instrument (for example, using higher values on XAUUSD or indices compared to EURUSD). Similarly, adjust ATR_SL_Multiplier to match your preferred stop-loss buffer relative to current market volatility.
- Account Environment: Compatible with both hedging and netting account types across standard, ECN, and raw-spread brokers.

Input Parameters Documentation

[1] Entry Logic and Core WAE Parameters
- InpSection1 (Default: "=== [LOGIC] MACD Settings (WAE) ===") -> Section header label for core MACD momentum settings.
- Fast_MA (Default: 20) -> Fast EMA period used in the core MACD momentum calculation (in bars).
- Slow_MA (Default: 50) -> Slow EMA period used in the core MACD momentum calculation (in bars).
- InpSection2 (Default: "=== [LOGIC] Bollinger Bands (WAE) ===") -> Section header label for volatility band settings.
- BBPeriod (Default: 20) -> Lookback period for Bollinger Bands calculation to measure volatility expansion (in bars).
- BBDeviation (Default: 2.0) -> Standard deviation multiplier for upper and lower Bollinger Bands width.
- InpSection3 (Default: "=== [LOGIC] Waddah Settings ===") -> Section header label for sensitivity and threshold parameters.
- Sensetive (Default: 150) -> Multiplier coefficient applied to scale momentum histogram amplitude visually and numerically.
- DeadZonePip (Default: 30) -> Minimum volatility and momentum threshold level expressed in points to filter low-volume consolidation.
- InpSection4 (Default: "=== [LOGIC] Power Filter (Optional) ===") -> Section header label for optional momentum acceleration filtering.
- UsePowerFilter (Default: false) -> Enables or disables secondary momentum and explosion rate-of-change validation.
- ExplosionPower (Default: 15) -> Minimum expansion rate threshold required for the Explosion line when Power Filter is active.
- TrendPower (Default: 15) -> Minimum expansion rate threshold required for the Trend histogram when Power Filter is active.

[2] ATR and Target Levels (SL/TP) Parameters
- InpSection5 (Default: "=== [C] ATR & TARGET LEVELS (SL/TP) ===") -> Section header label for ATR target projection settings.
- Show_SL_TP_Lines (Default: true) -> Toggles the display of Entry, Stop Loss, and Take Profit lines on the main chart for the latest signal.
- ATR_Period (Default: 7) -> Lookback period for Average True Range volatility calculation (in bars).
- ATR_SL_Multiplier (Default: 1.5) -> Multiplier applied to the ATR value to determine Stop Loss distance (1R risk unit).
- Line_Extension_Bars (Default: 1) -> Number of bars to extend horizontal target lines to the right of the current active candle.
- Label_Font_Size (Default: 8) -> Font size in points for price and risk-reward text labels displayed beside target lines.
- Entry_Line_Color (Default: clrGold) -> Color of the signal entry reference line.
- SL_Line_Color (Default: clrRed) -> Color of the Stop Loss reference line.
- TP1_Line_Color (Default: clrLimeGreen) -> Color of the first Take Profit target line (1:1 Risk-to-Reward).
- TP2_Line_Color (Default: clrMediumSeaGreen) -> Color of the second Take Profit target line (1:2 Risk-to-Reward).
- TP3_Line_Color (Default: clrDodgerBlue) -> Color of the third Take Profit target line (1:3 Risk-to-Reward).
- Target_Line_Style (Default: STYLE_DASH) -> Line drawing style (solid, dash, dot, dash-dot) for SL and TP levels.
- Target_Line_Width (Default: 1) -> Pixel thickness of the plotted target lines.

[3] Signals and Alerts Parameters
- InpSection6 (Default: "=== [SIGNALS] Chart Arrows ===") -> Section header label for main chart arrow visuals.
- ShowArrows (Default: true) -> Enables or disables plotting Buy and Sell directional arrows on the main price chart.
- BuyArrowColor (Default: clrAqua) -> Color of bullish signal arrows.
- SellArrowColor (Default: clrRed) -> Color of bearish signal arrows.
- ArrowSize (Default: 2) -> Visual size scale (1 to 5) of the signal arrows on the chart.
- ArrowOffsetPips (Default: 30) -> Vertical distance offset of arrows from candle high/low (scaled in pips/points).
- InpSection7 (Default: "=== [ALERTS] Notification Settings ===") -> Section header label for alert routing options.
- AlertWindow (Default: true) -> Enables MetaTrader terminal pop-up alert dialog boxes on confirmed signals.
- AlertSound (Default: true) -> Enables audio sound playback when a confirmed signal occurs.
- SoundBuy (Default: "alert.wav") -> Audio file name located in the MetaTrader Sounds directory for Buy signals.
- SoundSell (Default: "alert.wav") -> Audio file name located in the MetaTrader Sounds directory for Sell signals.
- PushNotification (Default: true) -> Sends push notifications to the MetaTrader mobile application via MetaQuotes ID.
- SendMailAlert (Default: false) -> Sends signal notifications via configured terminal SMTP email settings.
- AlertLong (Default: true) -> Allows alerts to trigger on confirmed bullish signals.
- AlertShort (Default: true) -> Allows alerts to trigger on confirmed bearish signals.

[4] Universal 15-Filter Framework Input Parameters
- InpFilter1 (Default: "=== 1. RSI CROSS FILTER ===") -> Section header for Filter 1.
- Use_RSI_Cross_Filter (Default: false) -> Enables RSI oversold/overbought level crossover confirmation.
- RSI_Length (Default: 14) -> Calculation period for the RSI Cross filter (in bars).
- RSI_Price_Source (Default: PRICE_CLOSE) -> Applied price type used for RSI calculations.
- RSI_Oversold (Default: 30.0) -> Oversold threshold level that RSI must cross upward to validate a Buy signal.
- RSI_Overbought (Default: 70.0) -> Overbought threshold level that RSI must cross downward to validate a Sell signal.
- InpFilter2 (Default: "=== 2. ADX FILTER ===") -> Section header for Filter 2.
- Use_ADX_Filter (Default: false) -> Enables Average Directional Index minimum trend strength filtering.
- ADX_Period (Default: 10) -> Calculation period for the ADX main line (in bars).
- ADX_Min_Level (Default: 20.0) -> Minimum ADX value required to confirm sufficient directional trend strength.
- InpFilter3 (Default: "=== 3. SINGLE MA FILTER ===") -> Section header for Filter 3.
- Use_MA_Filter (Default: false) -> Enables closing price position filtering relative to a single Moving Average.
- MA_Period (Default: 50) -> Averaging period for the Single MA filter (in bars).
- MA_Method (Default: MODE_SMA) -> Smoothing method (SMA, EMA, SMMA, LWMA) for the Single MA filter.
- MA_Shift (Default: 0) -> Horizontal shift of the Single MA line (in bars).
- InpFilter4 (Default: "=== 4. ICHIMOKU SENKOU SPAN B FILTER ===") -> Section header for Filter 4.
- Use_Ichimoku_Filter (Default: false) -> Enables trend direction filtering relative to the Ichimoku Senkou Span B cloud boundary.
- Ichimoku_Tenkan (Default: 9) -> Tenkan-sen period for Ichimoku calculation (in bars).
- Ichimoku_Kijun (Default: 26) -> Kijun-sen period for Ichimoku calculation (in bars).
- Ichimoku_SenkouB (Default: 52) -> Senkou Span B period used as the structural trend baseline (in bars).
- InpFilter5 (Default: "=== 5. RSI 75 FILTER ===") -> Section header for Filter 5.
- Use_RSI75_Filter (Default: false) -> Enables long-period RSI 50-level midline trend bias filtering.
- RSI_Filter_Period (Default: 75) -> Lookback period for the midline RSI filter (in bars).
- InpFilter6 (Default: "=== 6. DOUBLE MA FILTER ===") -> Section header for Filter 6.
- Use_DoubleMA_Filter (Default: false) -> Enables dual Moving Average alignment filtering (Fast MA vs. Slow MA).
- MA_A_Period (Default: 30) -> Period for the faster Moving Average A (in bars).
- MA_A_Method (Default: MODE_EMA) -> Smoothing method for Moving Average A.
- MA_A_Applied (Default: PRICE_CLOSE) -> Applied price type for Moving Average A.
- MA_A_Shift (Default: 0) -> Horizontal shift for Moving Average A (in bars).
- MA_B_Period (Default: 140) -> Period for the slower Moving Average B (in bars).
- MA_B_Method (Default: MODE_EMA) -> Smoothing method for Moving Average B.
- MA_B_Applied (Default: PRICE_CLOSE) -> Applied price type for Moving Average B.
- MA_B_Shift (Default: 0) -> Horizontal shift for Moving Average B (in bars).
- InpFilter7 (Default: "=== 7. AWESOME OSCILLATOR FILTER ===") -> Section header for Filter 7.
- Use_AO_Filter (Default: false) -> Enables Bill Williams Awesome Oscillator multi-mode confirmation.
- Use_AO_Volume_Filter (Default: false) -> Requires AO value to exceed minimum amplitude thresholds.
- AO_Buy_Min (Default: 4.0) -> Minimum positive AO value required for Buy validation.
- AO_Sell_Max (Default: -4.0) -> Maximum negative AO value required for Sell validation.
- Use_AO_Color_Filter (Default: false) -> Requires AO histogram slope/color to align with trade direction.
- Use_AO_Zero_Filter (Default: false) -> Requires AO to be above zero with rising momentum for Buy, or below zero with falling momentum for Sell.
- InpFilter8 (Default: "=== 8. PARABOLIC SAR FILTER ===") -> Section header for Filter 8.
- Use_SAR_Filter (Default: false) -> Enables Parabolic SAR dot position trend filtering.
- SAR_Step (Default: 0.02) -> Acceleration factor step increment for Parabolic SAR.
- SAR_Maximum (Default: 0.2) -> Maximum acceleration factor limit for Parabolic SAR.
- InpFilter9 (Default: "=== 9. HEIKEN ASHI FILTER ===") -> Section header for Filter 9.
- Use_HeikenAshi_Filter (Default: false) -> Enables smoothed Heiken Ashi candle polarity confirmation (bullish/bearish body).
- InpFilter10 (Default: "=== 10. CCI TREND FILTER ===") -> Section header for Filter 10.
- Use_CCI_Filter (Default: false) -> Enables Commodity Channel Index zero-line trend bias filtering.
- CCI_Period (Default: 50) -> Lookback period for the CCI Trend filter (in bars).
- CCI_Applied (Default: PRICE_CLOSE) -> Applied price type for the CCI Trend filter.
- InpFilter11 (Default: "=== 11. CCI OB & OS FILTER ===") -> Section header for Filter 11.
- Use_CCI_OBOS_Filter (Default: false) -> Enables CCI momentum breakout filtering beyond overbought/oversold thresholds.
- CCI_OBOS_Period (Default: 14) -> Lookback period for the CCI OB/OS filter (in bars).
- CCI_OBOS_Applied (Default: PRICE_CLOSE) -> Applied price type for the CCI OB/OS filter.
- CCI_Overbought (Default: 100.0) -> Upper CCI threshold level for bullish momentum confirmation.
- CCI_Oversold (Default: -100.0) -> Lower CCI threshold level for bearish momentum confirmation.
- InpFilter12 (Default: "=== 12. RVI FILTERS ===") -> Section header for Filter 12.
- Use_RVI_Filter (Default: false) -> Enables Relative Vigor Index zero-line trend filtering.
- RVI_Period (Default: 75) -> Lookback period for the RVI zero-line trend filter (in bars).
- Use_RVI_Signal_Filter (Default: false) -> Enables RVI main line versus signal line crossover alignment.
- RVI_Signal_Period (Default: 20) -> Lookback period for the RVI signal line filter (in bars).
- InpFilter13 (Default: "=== 13. MACD FILTERS ===") -> Section header for Filter 13.
- Use_MACD_Filter (Default: false) -> Enables secondary MACD histogram polarity filtering (Main vs. Signal).
- MACD_FastEMA (Default: 12) -> Fast EMA period for the secondary MACD filter (in bars).
- MACD_SlowEMA (Default: 26) -> Slow EMA period for the secondary MACD filter (in bars).
- MACD_SignalSMA (Default: 9) -> Signal SMA period for the secondary MACD filter (in bars).
- MACD_Applied (Default: PRICE_CLOSE) -> Applied price type for the secondary MACD filter.
- Use_MACD_Zero_Filter (Default: false) -> Requires secondary MACD main line to be above zero for Buy and below zero for Sell.
- InpFilter14 (Default: "=== 14. SR & FIBONACCI FILTERS ===") -> Section header for Filter 14.
- Use_SR_Filter (Default: false) -> Enables structural Support and Resistance zone proximity filtering.
- SR_Period (Default: 50) -> Lookback window to identify recent swing highs and lows (in bars).
- SR_Zone_Points (Default: 80) -> Tolerance zone radius around Support/Resistance levels (in points).
- Use_Fib_Filter (Default: false) -> Enables Fibonacci retracement zone validation between two configured ratios.
- Fib_Level_1 (Default: 0.382) -> First Fibonacci retracement ratio boundary.
- Fib_Level_2 (Default: 0.618) -> Second Fibonacci retracement ratio boundary.
- ZigZag_Depth (Default: 12) -> Minimum bar depth parameter for internal swing point detection.
- ZigZag_Deviation (Default: 5) -> Minimum price deviation for swing point detection (in points).
- ZigZag_Backstep (Default: 3) -> Minimum bar separation between consecutive swing highs or lows.
- InpFilter15 (Default: "=== 15. SUPERTREND FILTER ===") -> Section header for Filter 15.
- Use_Supertrend_Filter (Default: false) -> Enables ATR-based Supertrend directional regime filtering.
- ST_AtrPeriod (Default: 10) -> Wilder ATR lookback period for Supertrend calculation (in bars).
- ST_Factor (Default: 3.0) -> Volatility band multiplier factor for Supertrend calculation.

Risk Disclaimer
Trading foreign exchange, commodities, indices, and other financial instruments involves significant risk and may not be suitable for all investors. Past performance does not guarantee future results. This indicator is an analytical software tool designed to assist traders in technical chart analysis; it does not execute trades automatically and does not guarantee financial profit. Always test the indicator thoroughly on a demo account to understand its operational behavior and parameter sensitivity before applying it to live trading decisions.
Yazarın diğer ürünleri
Overview MACD Signal with Multi Filters is an advanced technical analysis indicator engineered for MetaTrader 5 (MT5). The software combines the classic Moving Average Convergence Divergence (MACD) oscillator architecture with a modular 14-filter confirmation engine (MultiFilterSuite). It is developed to assist manual traders, quantitative analysts, and algorithmic system developers in identifying momentum shifts, trend continuations, and structural turning points while filtering out sideways ma
Parabolic SAR Multi-Filter System MT5: Algorithmic Trend Reversal Engine 1. PRODUCT OVERVIEW & OPERATIONAL ARCHITECTURE Parabolic SAR Multi-Filter System MT5 is a professional multi-component technical analysis indicator engineered for the MetaTrader 5 terminal. The indicator combines J. Welles Wilder's classic Parabolic Time/Price System with an advanced modular filtering architecture comprising 17 distinct secondary validation engines. The primary objective of this software is to eliminate f
Hull Trend Arrows MT5 with Multi-Filter Suite - Technical Documentation 1. Overview and Analytical Purpose Hull Trend Arrows MT5 with Multi-Filter Suite is an algorithmic technical indicator for MetaTrader 5. It integrates the low-lag calculation engine of the Hull Moving Average (HMA) with fourteen modular confirmation filters to identify directional momentum transitions, calculate inflection points, and display non-repainting entry signals on the chart. Standard moving averages introduce sign
FREE
HA Signal MultiFilter MT5 - Technical Operational Manual & Architecture Guide 1. SYSTEM OVERVIEW & ARCHITECTURAL FOUNDATION HA Signal MultiFilter MT5 is a specialized analytical indicator developed for MetaTrader 5 terminal to identify directional momentum expansions and structural trend continuations[cite: 2]. By synthesizing smoothed Heiken Ashi candlestick price discovery with a modular 15-layer secondary confirmation filter suite, the system extracts high-probability market shifts while fil
FREE
Product Overview: Relative Vigor Index Multi-Filter Technical System The Relative Vigor Index (RVI) Multi-Filter Indicator is a comprehensive technical analysis engine developed for the MetaTrader 5 terminal. Designed to identify cyclical momentum shifts, trend continuations, and structural market turning points, this analytical system couples the classic Relative Vigor Index formula with an advanced multi-layered confirmation matrix consisting of 17 distinct technical filters. Rather than rely
FREE
1. OVERVIEW Harmonic Dashboard is a specialized multi-symbol and multi-timeframe analytical indicator designed for MetaTrader 5 (MT5). The software systematically scans financial instruments across multiple timeframes to identify six classical harmonic chart patterns: Gartley, Bat, Butterfly, Crab, Cypher, and Shark. The application consolidates multi-asset scanner results, trend filter validation metrics, price level projections, and interactive chart navigation controls into a single graphic
Overview The MA Cross Scanner Pro is an advanced, highly optimized multi-symbol and multi-timeframe analytical dashboard engineered specifically for the MetaTrader 5 terminal. Designed for technical analysts, systemic traders, and quantitative researchers, this utility serves as a comprehensive market surveillance engine. Its primary objective is to continuously monitor a customized array of financial instruments across numerous timeframes simultaneously, detecting precise moving average crosso
CCI MultiFilter Overbought Oversold Signal Pro MT5 Technical Specification & Operational Manual  1. Overview and System Identity CCI MultiFilter Overbought Oversold Signal Pro MT5 is an institutional-grade technical analysis indicator engineered natively for MetaTrader 5. Developed for quantitative analysts, systematic manual traders, and multi-asset operators, the system provides an objective algorithmic framework to identify cyclical market extremes, momentum shifts, and structural trend cont
WPR Williams Percent Range All Pair Timeframe Scanner Dashboard Overview WPR Scanner Dashboard Pro is a multi-symbol, multi-timeframe market scanning indicator and visual chart overlay utility built for MetaTrader 4 (MT4). The tool monitors Williams Percent Range (WPR) momentum exhaustion and threshold breakouts across multiple currency pairs, metals, indices, and CFDs simultaneously from a single chart window. In addition to its core WPR detection engine, the indicator incorporates an optiona
WAE Waddah Attar Explosion Multi Pair TimeFrame Scanner 1. Overview - WAE Scanner Dashboard is a technical analysis indicator and multi-symbol, multi-timeframe market scanner built for MetaTrader 4 (MT4). - It automates multi-chart monitoring by scanning volatility-driven momentum breakouts based on the Waddah Attar Explosion (WAE) methodology across multiple currency pairs, crosses, indices, or metals simultaneously. - Candidate signals are processed through a modular 15-filter technical conf
UT Bot Trend Multi Pair Timeframe Scan Dashboard Overview UT Bot Scanner Dashboard is a multi-pair and multi-timeframe technical indicator and market scanner developed natively for MetaTrader 4 (MT4). It continuously monitors selected Forex pairs, precious metals, indices, or active Market Watch symbols across multiple timeframes simultaneously to detect dynamic Average True Range (ATR) volatility trailing stop crossovers. Instead of manually cycling through dozens of individual charts to monit
TDI Traders Dynamic Index RSI Scanner All Pair TF Overview TDI & RSI Dynamic Line Dashboard Scanner is a multi-symbol and multi-timeframe analytical indicator designed for MetaTrader 4. The tool monitors multiple currency pairs, commodities, or indices across selected chart timeframes simultaneously to detect crossover events derived from the Traders Dynamic Index (TDI) and dual Relative Strength Index (RSI) Dynamic Lines. Every detected signal is evaluated against an optional 15-module technica
Stochastic Scanner Dashboard for MetaTrader 4 Stochastic Overbought Oversold Scanner Dashboard All Pair Time frame Overview - Stochastic Scanner Dashboard is a multi-symbol and multi-timeframe technical analysis indicator and market scanner built for MetaTrader 4 (MT4). - The tool continuously monitors user-defined currency pairs, metals, or Market Watch symbols across multiple timeframes from one chart. - It detects momentum shifts using configurable Stochastic Oscillator strategies and valida
SSL Channel Trend Scanner Dashboard Multi Pair Multi TimeFrame Overview SSL Channel Multi-Filter Dashboard is a technical analysis indicator and multi-symbol, multi-timeframe market scanner built for MetaTrader 4. It continuously monitors multiple currency pairs, commodities, or other broker instruments across user-selected timeframes to detect directional channel crossovers confirmed by an optional 15-module technical filter suite. Validated signals are organized in an interactive on-chart dash
Relative Vigor Index RVI All Pair and Timeframe Scanner Dashboard Overview RVI Scanner Dashboard is a multi-pair and multi-timeframe technical indicator and interactive scanner panel for MetaTrader 4 (MT4). Built around the Relative Vigor Index (RVI) oscillator, it continuously monitors multiple currency pairs, commodities, or indices across selected timeframes from one chart window. The tool detects directional momentum crossovers, validates setups through an optional 15-module technical conf
RSI Parabolic Overbought Oversold Multi pair Timeframe Scanner 1. Overview - RSI Parabolic Scanner Dashboard is a multi-symbol, multi-timeframe technical analysis indicator and real-time market scanner engineered for MetaTrader 4 (MT4). - It continuously monitors user-defined currency pairs, metals, or visible Market Watch instruments across multiple chart timeframes to identify momentum reversals and overbought or oversold market conditions. - The indicator combines two selectable RSI-based si
RSI Divergence Multi Pair Timeframe Scan Dashboard Overview - Product Type: Multi-symbol, multi-timeframe technical analysis indicator and interactive market dashboard scanner for MetaTrader 4 (MT4). - Core Purpose: Continuously monitors configured currency pairs, precious metals, indices, or active Market Watch symbols across multiple chart timeframes simultaneously to identify Regular and Hidden Relative Strength Index (RSI) divergence setups in one unified terminal window. - Structured Trade
Overview - Product Identity: Pola MultiCandle Scanner Dashboard is a multi-pair and multi-timeframe technical analysis indicator and market scanner developed for MetaTrader 4 (MT4). - Core Purpose: Continuously monitors user-defined currency pairs, precious metals, or Market Watch instruments across multiple timeframes to detect structured multi-candle price action formations, validate setups through a modular 15-indicator confluence suite, calculate volatility-adjusted Stop Loss (SL) and dual
MACD Signal Trend Cross Scanner All Pair Dashboard Overview MACD Scanner Dashboard is a technical analysis utility and multi-symbol, multi-timeframe dashboard indicator designed for MetaTrader 4[cite: 1]. Its primary objective is to monitor MACD crossover events across multiple currency pairs and chart timeframes simultaneously from a single active chart window[cite: 1]. Instead of manually switching between dozens of charts, traders can observe real-time market momentum, directional bias, calc
MA Moving Average Cross Scanner All Pair Timeframe Dashboard Overview MA Cross Scanner is an analytical multi-symbol and multi-timeframe technical indicator equipped with an interactive on-chart dashboard panel for MetaTrader 4[cite: 1]. The tool is engineered to monitor Moving Average (MA) crossover events across multiple currency pairs and timeframes simultaneously, consolidating signal detection, modular trend/momentum filtering, and Average True Range (ATR) risk-reward level calculations in
Ichimoku Tenkan Kijun Cross Scanner All Pair TimeFrame Overview TK Cross Scanner Dashboard is a technical analysis indicator and multi-asset market scanner engineered for the MetaTrader 4 platform. The utility monitors multiple currency pairs, commodities, and timeframes simultaneously to detect Ichimoku Tenkan-sen and Kijun-sen crossovers (TK Cross). In addition to automated signal scanning, the software calculates dynamic Stop Loss (SL) and dual Take Profit (TP1 and TP2) reference levels usin
Ichimoku Senkou Span B Scanner All Pair Timeframe Overview Senkou Span B Scanner Dashboard MT4 is a technical analysis indicator and multi-asset market scanner designed for MetaTrader 4. The tool monitors multiple currency pairs, commodities, and timeframes simultaneously from a single chart window to detect price interactions with the Ichimoku Kinko Hyo Senkou Span B boundary. In addition to scanning for signal candidates, the indicator integrates a 15-module secondary confirmation suite, calc
Heiken Ashi Multi Currency Pair Time Frame Scan Dashboard Overview Heiken Ashi Multi Timeframe Scanner Dashboard is a technical analysis utility and multi-symbol, multi-timeframe market scanner developed for the MetaTrader 4 platform. The tool is designed to monitor multiple currency pairs, commodities, or indices simultaneously from a single chart window. Instead of manually switching between dozens of charts and timeframes to inspect Heiken Ashi candle formations, traders can view active dire
Pro Harmonic Pattern Scanner All Pair Time Frame Dashboard Harmonic Pattern Scanner Dashboard MT4 is an analytical multi-symbol and multi-timeframe technical indicator designed for MetaTrader 4. It automatically scans price action across selected currency pairs, metals, or Market Watch instruments to identify classic XABCD harmonic structures, calculate Fibonacci-based entry, Stop Loss, and Take Profit zones, and validate setups through an integrated modular trend and momentum filter suite. Op
Fractal Breakout Scanner Multi Pair Timeframe Dashboard Overview Fractal Breakout Scanner Dashboard is a technical analysis indicator and multi-symbol, multi-timeframe scanning utility designed for MetaTrader 4. The tool monitors multiple currency pairs, commodities, and indices simultaneously to detect price breakouts beyond confirmed Bill Williams Fractal swing highs and swing lows. Rather than requiring manual chart switching across dozens of instruments, the indicator aggregates real-time b
Institutional Candle Price Engulfing Scan All Pair Timeframe Engulfing Scanner Dashboard is a technical analysis utility and multi-symbol, multi-timeframe candlestick pattern scanner for MetaTrader 4. It detects Bullish Engulfing and Bearish Engulfing setups across multiple currency pairs and timeframes simultaneously, displaying active signals in an interactive on-chart table alongside ATR-based Stop Loss and Take Profit reference levels. 1. Overview and Technical Purpose - Product Category:
Pinbar Marubozu Rejection Candlestick Scanner All Pair Timeframe Overview Candle Pattern Scanner Dashboard is a technical analysis utility and multi-pair, multi-timeframe scanner indicator designed for MetaTrader 4. The indicator continuously monitors multiple currency pairs, commodities, or indices across selected timeframes to detect specific Japanese candlestick price action formations—namely Candle Rejection, Full-Body Marubozu, and Classic Pin Bar structures. When a valid candlestick forma
Chaikin Oscillator Scanner All Pair Timeframe Dashboard Overview Chaikin Oscillator Scanner Dashboard is a technical analysis utility and multi-symbol, multi-timeframe market scanner designed for MetaTrader 4 (MT4)[cite: 1]. The indicator monitors multiple currency pairs, commodities, or indices simultaneously across selected chart timeframes to identify Chaikin Oscillator zero-line crossover events[cite: 1]. Detected setups are presented in an interactive on-chart table complete with automated
CCI Signal Trend Overbought Oversold Scanner All Pair TimeFrame Dashboard CCI Multi Timeframe Scanner Dashboard is a technical analysis utility and multi-symbol market scanner developed for MetaTrader 4. The indicator monitors multiple currency pairs and timeframes simultaneously using Commodity Channel Index (CCI) calculations combined with an optional multi-indicator confirmation suite and Average True Range (ATR) volatility projections. 1. Operating Principle and Signal Validity - Core Cal
BB Bollinger Bands Breakout Scanner All Pair Time Frame Bollinger Bands Breakout Scanner Dashboard is a technical analysis utility and multi-symbol, multi-timeframe market scanner engineered for MetaTrader 4 (MT4). The software continuously monitors multiple currency pairs, commodities, or indices across user-defined timeframes to detect confirmed Bollinger Bands breakout setups. Every detected signal is evaluated through an optional modular confirmation suite and automatically paired with vola
Filtrele:
Değerlendirme yok
Değerlendirmeye yanıt