SSL Channel Trend Scanner Dashboard Multi Pair MTF
- Göstergeler
- Sürüm: 1.0
- Etkinleştirmeler: 5
SSL Channel Trend Scanner Dashboard Multi Pair Multi TimeFrame
Overview
SSL Channel Multi-Filter Dashboard is a technical analysis indicator and multi-symbol, multi-timeframe market scanner built for MetaTrader 4. It continuously monitors multiple currency pairs, commodities, or other broker instruments across user-selected timeframes to detect directional channel crossovers confirmed by an optional 15-module technical filter suite. Validated signals are organized in an interactive on-chart dashboard table alongside volatility-adjusted Stop Loss (SL) and dual Take Profit (TP1 and TP2) reference levels derived from the Average True Range (ATR), while automatically plotting directional arrows and horizontal price levels on the active chart.
Operating Principle
- Core Signal Engine: The primary directional trigger relies on an SSL Channel baseline constructed from Simple Moving Averages (SMA) calculated over candle High and Low prices across a configurable lookback period. A directional state shift occurs when a completed candle closes beyond the upper or lower channel boundary, establishing a new directional bias.
- Closed-Candle Evaluation and Non-Repainting Behavior: All signal scans and filter evaluations are performed strictly on closed historical bars starting from bar shift 1 up to the configured lookback depth, never on the actively forming bar 0. Once a candle closes and confirms a valid crossover, its recorded direction, timestamp, entry price, and ATR-based levels remain fixed and do not repaint or disappear on subsequent ticks. When structural filters such as Fibonacci retracements are enabled, swing extrema are evaluated from historical bar lookbacks relative to the closed signal candle.
- Bullish (BUY) Signal Logic: A bullish signal is registered when a closed candle transitions the channel state from bearish to bullish, bullish scanning is permitted by InpDirection, and the signal candle simultaneously satisfies every enabled module in the confirmation filter suite.
- Bearish (SELL) Signal Logic: A bearish signal is registered when a closed candle transitions the channel state from bullish to bearish, bearish scanning is permitted by InpDirection, and the signal candle simultaneously satisfies every enabled module in the confirmation filter suite.
- Modular Confirmation Architecture: Traders can operate the scanner using pure channel crossovers or activate any combination of 15 independent confirmation modules covering trend alignment, trend strength, momentum oscillators, acceleration stops, smoothed candle polarity, and price-action structural zones. Enabling multiple modules enforces strict multi-factor confluence before a signal is displayed or alerted.
- Volatility-Based Risk Levels: Upon confirming a valid signal, the indicator samples the ATR value at the exact signal candle to compute an adaptive Stop Loss distance and projects two Risk-to-Reward (RR) target levels (TP1 and TP2) scaled to broker symbol digits.
Key Features
- Multi-Pair and Multi-Timeframe Matrix Scanner: Monitors up to 15 symbols simultaneously from either a custom comma-separated symbol list or the active Market Watch window across up to 9 standard timeframes (M1, M5, M15, M30, H1, H4, D1, W1, MN1).
- 15 Optional Confirmation Filter Modules: Provides independent switches and parameter controls for RSI Crossover, ADX Trend Strength, Single Moving Average, Ichimoku Senkou Span B, Long-Period RSI, Double Moving Average Crossover, Awesome Oscillator (with amplitude, slope color, and zero-line modes), Parabolic SAR, Heiken Ashi, CCI Trend, CCI Overbought/Oversold, RVI Trend and Signal, MACD Histogram and Zero-Line, Support/Resistance and Fibonacci Retracement Zones, and Supertrend.
- Interactive On-Chart Dashboard Controls: Includes a draggable title bar that saves panel coordinates across timeframe changes, a minimize/maximize toggle (MIN/MAX) to collapse the table into a compact status bar, a manual rescan trigger (REFRESH), an object cleanup button (CLEAR), and clickable column headers to sort signals ascending or descending by Pair, Timeframe, Direction, or Signal Time.
- One-Click Chart Switching and Level Visualization: Clicking the OPEN button on any signal row automatically switches the active chart to that instrument and timeframe, sets the chart display to candlesticks, and draws the signal arrow along with extended horizontal Entry, SL, TP1, and TP2 reference lines and price labels.
- Multi-Channel Alert System: Supports terminal pop-up alerts, customizable .wav audio alerts, mobile push notifications via MetaQuotes ID, and SMTP email alerts containing full signal metrics (symbol, timeframe, direction, Entry, SL, TP1, TP2, ATR, and timestamp), with an option to restrict alerts strictly to newer candle timestamps.
- DPI-Aware Responsive Interface: Features a scaling factor from 70% to 180% alongside individual column width adjustments to preserve clear alignment on both standard and high-resolution displays.
Dashboard GUI, Performance, and Alert Specifications
- Graphical User Interface (GUI) Legend: Bullish (BUY) labels and Take Profit levels (TP1, TP2) are highlighted in green, bearish (SELL) labels and Stop Loss levels (SL) are highlighted in red, accent elements (dashboard title, active sort column, Entry line, and OPEN buttons) are highlighted in blue, and secondary metadata or inactive rows are displayed in muted gray.
- Dashboard Table Structure: The 11-column dashboard displays PAIR (instrument symbol), TF (timeframe label), DIR (BUY or SELL), TIME (signal bar timestamp), ENTRY (signal bar close price), SL (ATR Stop Loss price), TP 1 (first reward target), TP 2 (second reward target), ATR (sampled volatility value), AGE (elapsed time since signal candle formatted in seconds, minutes, hours, or days), and OPEN (interactive chart switch button).
- Computational Load and Terminal Efficiency: Because multi-pair and multi-timeframe scanning processes multiple historical series on a recurring timer interval (minimum 3 seconds), CPU and RAM usage scale with the number of active symbols, timeframes, and enabled filter modules. Use InpMaxSymbols, InpBarsCopy, and InpLookback to cap historical data processing per scan cycle, and attach the dashboard to a single dedicated chart rather than running multiple instances simultaneously on low-specification hardware.
- Notification Setup Requirements: Before activating mobile push notifications or email alerts, configure your MetaQuotes ID or SMTP mail server settings under Tools -> Options in the MetaTrader 4 client terminal.
Operation and Setup Recommendations
- Recommended Instruments: Suitable for major and minor Forex pairs (such as EURUSD, GBPUSD, USDJPY, AUDUSD, USDCAD, USDCHF, NZDUSD, EURJPY, GBPJPY) as well as liquid metals like XAUUSD. When entering custom symbols in InpSymbols, verify that symbol names include any broker-specific prefix or suffix and are enabled in Market Watch.
- Recommended Timeframes: Compatible with all standard MetaTrader 4 timeframes from M1 to MN1. Intraday traders typically monitor M5, M15, and M30, while day and swing traders commonly monitor H1 and H4.
- Account and Execution Environment: Works on both Hedging and Netting account types across standard or ECN broker feeds. Prior to launching the scanner, ensure sufficient historical bar data is downloaded across all configured symbols and timeframes so multi-timeframe filters initialize smoothly.
- Recommended Configuration Workflow: Start with default settings on a demo chart to verify dashboard layout and symbol scanning, enable only the confirmation filters aligned with your analytical methodology, and use the MIN button to keep the chart unobstructed when monitoring price action.
Input Parameters Documentation
1. Entry and Scanner Settings
- InpGroupEntry (Default: Group Label): Inputs tab section divider.
- InpSymbols (Default: "EURUSD,GBPUSD,USDJPY,AUDUSD,USDCAD,USDCHF,NZDUSD,EURJPY,GBPJPY,XAUUSD"): Comma-separated symbols scanned when InpUseWatch is false.
- InpTimeframes (Default: "M5,M15,M30,H1,H4"): Comma-separated timeframes scanned per symbol (M1, M5, M15, M30, H1, H4, D1, W1, MN1).
- InpUseWatch (Default: true): Loads active symbols from Market Watch up to InpMaxSymbols when true, or uses InpSymbols when false.
- InpMaxSymbols (Default: 15): Maximum instruments processed per scan cycle (symbols).
- InpScanSec (Default: 7): Automatic timer interval between scan updates (seconds; minimum 3).
- InpBarsCopy (Default: 100): Historical bars copied per symbol and timeframe for calculations (bars).
- InpLookback (Default: 100): Maximum closed bars searched backward from bar 1 for latest SSL crossover (bars).
- InpDirection (Default: 0): Directional scan filter (0 = BUY and SELL, 1 = BUY only, 2 = SELL only).
2. SSL Channel Core Settings
- InpGroupSSL (Default: Group Label): Inputs tab section divider.
- SSL_Period (Default: 10): Lookback period for upper (High) and lower (Low) SMAs forming SSL channel (bars).
3. ATR Risk and Money Management Settings
- InpGroupATR (Default: Group Label): Inputs tab section divider.
- InpATRPeriod (Default: 14): Lookback period for ATR calculation sampled at signal candle (bars).
- InpATRMultSL (Default: 1.5): ATR multiplier for Stop Loss distance from entry price (ATR multiple).
- InpTP1_RR (Default: 1.0): Risk-to-Reward multiplier applied to SL distance for Take Profit 1 (ratio, 1.0 = 1:1 RR).
- InpTP2_RR (Default: 2.0): Risk-to-Reward multiplier applied to SL distance for Take Profit 2 (ratio, 1.0 = 1:2 RR).
4. Alerts and Notifications Settings
- InpGroupAlerts (Default: Group Label): Inputs tab section divider.
- InpAlertPopup (Default: false): Enable/disable MetaTrader pop-up alert dialogs on signal detection.
- InpAlertSound (Default: false): Enable/disable audio alert playback on signal detection.
- InpSoundFile (Default: "alert.wav"): Audio filename in MetaTrader Sounds folder for sound alerts.
- InpAlertPush (Default: false): Enable/disable mobile push notifications via MetaQuotes ID.
- InpAlertEmail (Default: false): Enable/disable email notifications via terminal SMTP server.
- InpEmailSubject (Default: "SSL Scanner Signal"): Subject prefix for outgoing signal notification emails.
- InpAlertOnlyNew (Default: false): Triggers alerts only when a signal occurs on a newer candle timestamp than prior alert for that slot.
5. Dashboard UI and Layout Settings
- InpGroupUI (Default: Group Label): Inputs tab section divider.
- InpX (Default: 12): Initial horizontal offset of dashboard panel from top-left chart corner (pixels).
- InpY (Default: 28): Initial vertical offset of dashboard panel from top-left chart corner (pixels).
- InpScale (Default: 100): DPI scaling percentage for dashboard panel, clamped between 70 and 180 (percent).
- InpRowH (Default: 18): Base height of each signal row in dashboard table (pixels).
- InpFont (Default: 8): Base font size for table headers and cell values (points).
- InpPadX (Default: 8): Horizontal inner margin padding on left and right panel edges (pixels).
- InpWPair (Default: 68): Column width for symbol name (pixels).
- InpWTF (Default: 34): Column width for timeframe label (pixels).
- InpWArah (Default: 44): Column width for direction label (pixels).
- InpWTime (Default: 96): Column width for signal timestamp (pixels).
- InpWEntry (Default: 64): Column width for entry price (pixels).
- InpWSL (Default: 64): Column width for Stop Loss price (pixels).
- InpWTP1 (Default: 64): Column width for Take Profit 1 price (pixels).
- InpWTP2 (Default: 64): Column width for Take Profit 2 price (pixels).
- InpWATR (Default: 44): Column width for ATR reading (pixels).
- InpWUmur (Default: 42): Column width for signal age (pixels).
- InpWOpen (Default: 44): Column width for OPEN chart button (pixels).
- InpShowEmpty (Default: false): Displays scanned rows without active signals when true, or hides them when false.
- InpMaxRows (Default: 18): Maximum signal rows displayed in dashboard table (rows).
6. Sorting Options
- InpGroupSort (Default: Group Label): Inputs tab section divider.
- InpSortBy (Default: SORT_TIME): Default sort column (SORT_TIME = Time, SORT_PAIR = Pair, SORT_TF = Timeframe, SORT_DIR = Direction).
- InpSortNewest (Default: true): Sets initial sort order to descending (newest first by time) when true, or ascending when false.
7. Chart Visuals Settings
- InpGroupVisuals (Default: Group Label): Inputs tab section divider.
- InpDrawOnChart (Default: true): Enable/disable plotting signal arrows and Entry/SL/TP lines on active chart.
- InpShowArrow (Default: true): Displays or hides directional Wingdings signal arrows on active chart.
- InpShowLevels (Default: true): Displays or hides horizontal lines and labels for Entry, SL, TP1, and TP2 on active chart.
- InpExtendBars (Default: 25): Bars forward from signal candle to extend horizontal level lines (bars).
- InpArrowCodeBuy (Default: 233): Wingdings code for bullish BUY arrows.
- InpArrowCodeSell (Default: 234): Wingdings code for bearish SELL arrows.
- InpArrowSize (Default: 2): Visual width thickness of plotted signal arrows (size index 1 to 5).
- InpArrowDistance (Default: 15): Vertical offset gap between signal arrow and candle price (points).
8. Color Palette Settings
- InpGroupColors (Default: Group Label): Inputs tab section divider.
- InpColBg (Default: C'18,22,28'): Main background fill color of dashboard panel.
- InpColHead (Default: C'32,38,48'): Background color of title bar and column headers.
- InpColRow (Default: C'24,28,36'): Background color for even table rows.
- InpColRow2 (Default: C'28,33,42'): Background color for alternating odd table rows.
- InpColText (Default: C'220,225,230'): Primary text color for symbols, timestamps, and entry values.
- InpColBull (Default: C'0,200,83'): Text color highlighting bullish BUY labels.
- InpColBear (Default: C'255,82,82'): Text color highlighting bearish SELL labels.
- InpColMute (Default: C'120,128,140'): Muted text color for status text, ATR, signal age, and inactive cells.
- InpColAccent (Default: C'41,98,255'): Accent color for dashboard title, active sort header, and OPEN buttons.
- InpColArrowBuy (Default: C'0,230,118'): Color of bullish BUY arrows on active chart.
- InpColArrowSell (Default: C'255,82,82'): Color of bearish SELL arrows on active chart.
- InpColEntry (Default: C'41,98,255'): Line and label color for Entry level on active chart.
- InpColSL (Default: C'255,82,82'): Line and label color for Stop Loss level on dashboard and chart.
- InpColTP1 (Default: C'0,200,83'): Line and label color for Take Profit 1 level on dashboard and chart.
- InpColTP2 (Default: C'0,230,118'): Line and label color for Take Profit 2 level on dashboard and chart.
9. Filter Module 1: RSI Cross Filter
- InpFilter1 (Default: Group Label): Inputs tab section label.
- Use_RSI_Cross_Filter (Default: false): Enable/disable requiring an RSI threshold crossover at signal candle.
- RSI_Length (Default: 14): Calculation period for RSI crossover filter (bars).
- RSI_Price_Source (Default: PRICE_CLOSE): Applied price source for RSI calculation.
- RSI_Oversold (Default: 30.0): Lower RSI threshold for bullish crossovers (oscillator level).
- RSI_Overbought (Default: 70.0): Upper RSI threshold for bearish crossovers (oscillator level).
10. Filter Module 2: ADX Trend Strength Filter
- InpFilter2 (Default: Group Label): Inputs tab section label.
- Use_ADX_Filter (Default: false): Enable/disable minimum trend strength check via ADX main line.
- ADX_Period (Default: 10): Lookback period for ADX calculation (bars).
- ADX_Min_Level (Default: 20.0): Minimum ADX value required for trend strength (oscillator level).
11. Filter Module 3: Single Moving Average Filter
- InpFilter3 (Default: Group Label): Inputs tab section label.
- Use_MA_Filter (Default: false): Enable/disable price-versus-MA directional trend filtering.
- MA_Period (Default: 50): Averaging period for single Moving Average (bars).
- MA_Method (Default: MODE_SMA): Smoothing method for Moving Average (SMA, EMA, SMMA, or LWMA).
- MA_Shift (Default: 0): Horizontal bar shift offset for Moving Average (bars).
12. Filter Module 4: Ichimoku Senkou Span B Filter
- InpFilter4 (Default: Group Label): Inputs tab section label.
- Use_Ichimoku_Filter (Default: false): Enable/disable directional filtering relative to Ichimoku Senkou Span B.
- Ichimoku_Tenkan (Default: 9): Tenkan-sen conversion line period (bars).
- Ichimoku_Kijun (Default: 26): Kijun-sen base line period (bars).
- Ichimoku_SenkouB (Default: 52): Senkou Span B leading span period (bars).
13. Filter Module 5: RSI 75 Momentum Filter
- InpFilter5 (Default: Group Label): Inputs tab section label.
- Use_RSI75_Filter (Default: false): Enable/disable directional check relative to 50.0 midpoint of long-period RSI.
- RSI_Filter_Period (Default: 75): Lookback period for long-term RSI trend filter (bars).
14. Filter Module 6: Double Moving Average Filter
- InpFilter6 (Default: Group Label): Inputs tab section label.
- Use_DoubleMA_Filter (Default: false): Enable/disable fast-versus-slow Moving Average trend alignment.
- MA_A_Period (Default: 30): Period of faster Moving Average A (bars).
- MA_A_Method (Default: MODE_EMA): Smoothing method for Moving Average A.
- MA_A_Applied (Default: PRICE_CLOSE): Applied price source for Moving Average A.
- MA_A_Shift (Default: 0): Horizontal bar shift for Moving Average A (bars).
- MA_B_Period (Default: 140): Period of slower Moving Average B (bars).
- MA_B_Method (Default: MODE_EMA): Smoothing method for Moving Average B.
- MA_B_Applied (Default: PRICE_CLOSE): Applied price source for Moving Average B.
- MA_B_Shift (Default: 0): Horizontal bar shift for Moving Average B (bars).
15. Filter Module 7: Awesome Oscillator Filter
- InpFilter7 (Default: Group Label): Inputs tab section label.
- Use_AO_Filter (Default: false): Primary switch enabling Awesome Oscillator momentum conditions.
- Use_AO_Volume_Filter (Default: false): Requires AO histogram amplitude to meet bullish or bearish thresholds.
- AO_Buy_Min (Default: 4.0): Minimum AO value for bullish signals when Use_AO_Volume_Filter is active (oscillator value).
- AO_Sell_Max (Default: -4.0): Maximum AO value for bearish signals when Use_AO_Volume_Filter is active (oscillator value).
- Use_AO_Color_Filter (Default: false): Requires AO histogram bar slope to match signal direction versus prior bar.
- Use_AO_Zero_Filter (Default: false): Requires AO histogram to sit on directional side of zero with confirming slope.
16. Filter Module 8: Parabolic SAR Filter
- InpFilter8 (Default: Group Label): Inputs tab section label.
- Use_SAR_Filter (Default: false): Enable/disable directional price check relative to Parabolic SAR dots.
- SAR_Step (Default: 0.02): Acceleration factor step increment for Parabolic SAR (step factor).
- SAR_Maximum (Default: 0.2): Maximum acceleration factor cap for Parabolic SAR (factor).
17. Filter Module 9: Heiken Ashi Filter
- InpFilter9 (Default: Group Label): Inputs tab section label.
- Use_HeikenAshi_Filter (Default: false): Enable/disable synthetic Heiken Ashi candle close-to-open polarity alignment.
18. Filter Module 10: CCI Trend Filter
- InpFilter10 (Default: Group Label): Inputs tab section label.
- Use_CCI_Filter (Default: false): Enable/disable directional confirmation relative to CCI zero line.
- CCI_Period (Default: 50): Lookback period for CCI trend filter (bars).
- CCI_Applied (Default: PRICE_CLOSE): Applied price source for CCI trend filter.
19. Filter Module 11: CCI Overbought and Oversold Filter
- InpFilter11 (Default: Group Label): Inputs tab section label.
- Use_CCI_OBOS_Filter (Default: false): Enable/disable filtering signals against extreme CCI overbought and oversold levels.
- CCI_OBOS_Period (Default: 14): Lookback period for CCI OB/OS oscillator (bars).
- CCI_OBOS_Applied (Default: PRICE_CLOSE): Applied price source for CCI OB/OS oscillator.
- CCI_Overbought (Default: 100.0): Upper CCI threshold level (oscillator level).
- CCI_Oversold (Default: -100.0): Lower CCI threshold level (oscillator level).
20. Filter Module 12: RVI Trend and Signal Filters
- InpFilter12 (Default: Group Label): Inputs tab section label.
- Use_RVI_Filter (Default: false): Enable/disable directional check of RVI main line relative to zero.
- RVI_Period (Default: 75): Lookback period for RVI zero-line filter (bars).
- Use_RVI_Signal_Filter (Default: false): Enable/disable check of RVI main line relative to signal line.
- RVI_Signal_Period (Default: 20): Lookback period for RVI main-versus-signal comparison (bars).
21. Filter Module 13: MACD Histogram and Zero-Line Filters
- InpFilter13 (Default: Group Label): Inputs tab section label.
- Use_MACD_Filter (Default: false): Enable/disable check based on MACD main-minus-signal histogram polarity.
- MACD_FastEMA (Default: 12): Fast EMA period for MACD calculation (bars).
- MACD_SlowEMA (Default: 26): Slow EMA period for MACD calculation (bars).
- MACD_SignalSMA (Default: 9): Signal line SMA period for MACD calculation (bars).
- MACD_Applied (Default: PRICE_CLOSE): Applied price source for MACD calculation.
- Use_MACD_Zero_Filter (Default: false): Enable/disable confirming MACD main line sits on directional side of zero.
22. Filter Module 14: Support/Resistance and Fibonacci Retracement Filters
- InpFilter14 (Default: Group Label): Inputs tab section label.
- Use_SR_Filter (Default: false): Enable/disable price interaction check against recent swing Support or Resistance zones.
- SR_Period (Default: 50): Lookback window for detecting historical swing highs and lows (bars).
- SR_Zone_Points (Default: 80): Tolerance buffer around detected Support or Resistance levels (points).
- Use_Fib_Filter (Default: false): Enable/disable price interaction check against Fibonacci retracement zones between swing points.
- Fib_Level_1 (Default: 0.382): First Fibonacci retracement ratio boundary (ratio).
- Fib_Level_2 (Default: 0.618): Second Fibonacci retracement ratio boundary (ratio).
- ZigZag_Depth (Default: 12): Minimum bar depth for swing high and low detection (bars).
- ZigZag_Deviation (Default: 5): Minimum price deviation between swing points (points).
- ZigZag_Backstep (Default: 3): Minimum bar separation between consecutive swing extrema (bars).
23. Filter Module 15: Supertrend Filter
- InpFilter15 (Default: Group Label): Inputs tab section label.
- Use_Supertrend_Filter (Default: false): Enable/disable requiring Supertrend directional alignment at signal candle.
- ST_AtrPeriod (Default: 10): Wilder ATR lookback length used for Supertrend bands (bars).
- ST_Factor (Default: 3.0): Volatility multiplier applied to ATR for upper and lower Supertrend band offsets (ATR multiple).
Risk Disclaimer
Trading foreign exchange, commodities, and other financial instruments carries a high level of risk and may not be suitable for all investors. Past performance and historical signal behavior do not guarantee future results. This product is a technical analysis and market-scanning software utility designed to assist traders in monitoring chart conditions; it does not provide financial or investment advice and does not guarantee trading profits. Always test the indicator thoroughly on a demo account to understand its operational behavior and resource usage before applying it in a live trading environment.
