Tüm siparişler
Kurallar
Bir alım-satım robotunun nasıl sipariş edileceğini izleyin
Bir sipariş vermeden veya bir siparişe başvurmadan önce Kuralları okuyun
Bir MQL5/MQL4 Alım-Satım Robotu Nasıl Sipariş Edilir?
Bir robot sipariş etmek için örnek Gereklilikler Şartnamesine bakın
Kategorideki yeni siparişler:
30+ USD
30 - 40 USD
150 - 200 USD
30 - 200 USD
Şartname
MetaTrader 4 (MT4) script that implements a channel breakout strategy. This script will use the "HHLLIndicator" and "Average Daily Range (ADR)" indicators to make trading decisions.
Logic Overview:
Indicators: The script will utilize two custom indicators: "HHLLIndicator" to identify Highest High (HH) and Lowest Low (LL) and "ADR" to calculate the Average Daily Range.
Timeframe: The strategy will be applied on the 15-minute (M15) chart.
Entry Conditions:
Average Daily Range (ADR) Check: The script will calculate the ADR using the "ADR" indicator. If the ADR is greater than or equal to 100 pips, the script will proceed with the strategy. Otherwise, it will not trade.
HH and LL Calculation: The "HHLLIndicator" will be used to calculate the Highest High (HH) and Lowest Low (LL) on the 15-minute chart.
Entry Levels: The script will calculate entry levels for both long (buy) and short (sell) positions.
Buy Stop: Above the HH by a specified number of pips.
Sell Stop: Below the LL by a specified number of pips.
Pending Orders:
The script will check for existing pending orders and delete them to avoid duplication.
Order Placement:
The script will place pending buy-stop and sell-stop orders at the calculated levels.
Trailing Stop:
If the Trailing Step Stop is enabled (not set to -1), the script will not set trailing stops.
If the Trailing Step Stop is set to -1, the script will set trailing stops for both buy and sell orders. The trailing stop will initially be set at "TrailingStopStart" pips, and it will step by "TrailingStepSteps" pips as the price moves in favor of the trade.
Detailed Task:
Create a new script in MetaEditor and name it "ChannelBreakout.mq4."
Define the necessary input parameters at the beginning of the script. These parameters include:
StopLoss: Stop Loss in pips (0 for automatic calculation).
TakeProfit: Take Profit in pips (0 for automatic calculation).
ADRThreshold1: ADR threshold for the first condition (e.g., 100).
ADRThreshold2: ADR threshold for the second condition (e.g., 175).
EntryOffsetPips: Offset for entry orders (e.g., 10).
EntryHourGMT: Hour to enter pending orders in GMT time (e.g., 23).
RiskRewardRatio: Risk-reward ratio (e.g., 3.0).
TrailingStopStart: Initial Trailing Stop in pips (e.g., 30).
TrailingStepSteps: Trailing Step in pips (e.g., 20).
TrailingStepStop: Trailing Step Stop (use StopLoss or set to -1 for trailing) (e.g., -1).
MagicNumber: Magic Number for orders (e.g., 0).
BuyStopAboveLL: Buy Stop Offset above Lowest Low in pips (e.g., 10).
SellStopBelowHH: Sell Stop Offset below Highest High in pips (e.g., 10).
In the "OnInit" function, create handles for the "HHLLIndicator" and "ADR" indicators. These handles will allow you to access the indicator values later.
In the "OnDeinit" function, delete the indicator handles to free up resources.
In the "OnTick" function, implement the trading logic based on the steps mentioned in the logic overview. Specifically:
Calculate the ADR using the "ADR" indicator on the 15-minute chart.
Check if ADR is greater than or equal to "ADRThreshold1." If not, do not proceed with trading.
Calculate HH and LL using the "HHLLIndicator" on the 15-minute chart.
Calculate entry levels for buy and sell orders based on HH, LL, BuyStopAboveLL, and SellStopBelowHH.
Check for existing pending orders and delete them.
Place pending buy-stop and sell-stop orders at the calculated levels.
If "TrailingStepStop" is set to -1, set trailing stops for both buy and sell orders.
Create a function to delete pending orders called "DeletePendingOrders." This function should iterate through existing orders and delete buy-stop and sell-stop orders.
Create a function to set trailing stops called "SetTrailingStop." This function should calculate the appropriate trailing stop level based on the current price and trailing parameters.
Save and compile the script.
Attach the "ChannelBreakout.mq4" script to a 15-minute chart in MetaTrader.
Ensure that the "HHLLIndicator" and "ADR" indicators are properly installed and available in MetaTrader.
Test the script in a demo account to ensure it behaves as expected and follows the defined logic.
The strategy now it has erros and dont work as should
In the atachment you have all teh script and the EA the chart must display the
ADR =day value
Details aboout postions
Positions
SL
TP
Working/Slipping
Must work on any time frame and calculate the ADR
HH and LL lines above the candle
I need to know how long you need and how much you want to be pay the job is for 2-3 h max
Debug report
back testing report
No errors or warning
Zomm and interview is amust before job will be acceptd
Logic Overview:
Indicators: The script will utilize two custom indicators: "HHLLIndicator" to identify Highest High (HH) and Lowest Low (LL) and "ADR" to calculate the Average Daily Range.
Timeframe: The strategy will be applied on the 15-minute (M15) chart.
Entry Conditions:
Average Daily Range (ADR) Check: The script will calculate the ADR using the "ADR" indicator. If the ADR is greater than or equal to 100 pips, the script will proceed with the strategy. Otherwise, it will not trade.
HH and LL Calculation: The "HHLLIndicator" will be used to calculate the Highest High (HH) and Lowest Low (LL) on the 15-minute chart.
Entry Levels: The script will calculate entry levels for both long (buy) and short (sell) positions.
Buy Stop: Above the HH by a specified number of pips.
Sell Stop: Below the LL by a specified number of pips.
Pending Orders:
The script will check for existing pending orders and delete them to avoid duplication.
Order Placement:
The script will place pending buy-stop and sell-stop orders at the calculated levels.
Trailing Stop:
If the Trailing Step Stop is enabled (not set to -1), the script will not set trailing stops.
If the Trailing Step Stop is set to -1, the script will set trailing stops for both buy and sell orders. The trailing stop will initially be set at "TrailingStopStart" pips, and it will step by "TrailingStepSteps" pips as the price moves in favor of the trade.
Detailed Task:
Create a new script in MetaEditor and name it "ChannelBreakout.mq4."
Define the necessary input parameters at the beginning of the script. These parameters include:
StopLoss: Stop Loss in pips (0 for automatic calculation).
TakeProfit: Take Profit in pips (0 for automatic calculation).
ADRThreshold1: ADR threshold for the first condition (e.g., 100).
ADRThreshold2: ADR threshold for the second condition (e.g., 175).
EntryOffsetPips: Offset for entry orders (e.g., 10).
EntryHourGMT: Hour to enter pending orders in GMT time (e.g., 23).
RiskRewardRatio: Risk-reward ratio (e.g., 3.0).
TrailingStopStart: Initial Trailing Stop in pips (e.g., 30).
TrailingStepSteps: Trailing Step in pips (e.g., 20).
TrailingStepStop: Trailing Step Stop (use StopLoss or set to -1 for trailing) (e.g., -1).
MagicNumber: Magic Number for orders (e.g., 0).
BuyStopAboveLL: Buy Stop Offset above Lowest Low in pips (e.g., 10).
SellStopBelowHH: Sell Stop Offset below Highest High in pips (e.g., 10).
In the "OnInit" function, create handles for the "HHLLIndicator" and "ADR" indicators. These handles will allow you to access the indicator values later.
In the "OnDeinit" function, delete the indicator handles to free up resources.
In the "OnTick" function, implement the trading logic based on the steps mentioned in the logic overview. Specifically:
Calculate the ADR using the "ADR" indicator on the 15-minute chart.
Check if ADR is greater than or equal to "ADRThreshold1." If not, do not proceed with trading.
Calculate HH and LL using the "HHLLIndicator" on the 15-minute chart.
Calculate entry levels for buy and sell orders based on HH, LL, BuyStopAboveLL, and SellStopBelowHH.
Check for existing pending orders and delete them.
Place pending buy-stop and sell-stop orders at the calculated levels.
If "TrailingStepStop" is set to -1, set trailing stops for both buy and sell orders.
Create a function to delete pending orders called "DeletePendingOrders." This function should iterate through existing orders and delete buy-stop and sell-stop orders.
Create a function to set trailing stops called "SetTrailingStop." This function should calculate the appropriate trailing stop level based on the current price and trailing parameters.
Save and compile the script.
Attach the "ChannelBreakout.mq4" script to a 15-minute chart in MetaTrader.
Ensure that the "HHLLIndicator" and "ADR" indicators are properly installed and available in MetaTrader.
Test the script in a demo account to ensure it behaves as expected and follows the defined logic.
The strategy now it has erros and dont work as should
In the atachment you have all teh script and the EA the chart must display the
ADR =day value
Details aboout postions
Positions
SL
TP
Working/Slipping
Must work on any time frame and calculate the ADR
HH and LL lines above the candle
I need to know how long you need and how much you want to be pay the job is for 2-3 h max
Debug report
back testing report
No errors or warning
Zomm and interview is amust before job will be acceptd
Yanıtlandı
1
Derecelendirme
Projeler
90
29%
Arabuluculuk
24
13%
/
58%
Süresi dolmuş
7
8%
Çalışıyor
2
Derecelendirme
Projeler
228
80%
Arabuluculuk
22
27%
/
50%
Süresi dolmuş
11
5%
Serbest
Yayınlandı: 24 makale, 1882 kod
3
Derecelendirme
Projeler
80
10%
Arabuluculuk
38
8%
/
58%
Süresi dolmuş
6
8%
Serbest
4
Derecelendirme
Projeler
4
0%
Arabuluculuk
4
25%
/
75%
Süresi dolmuş
1
25%
Serbest
5
Derecelendirme
Projeler
25
4%
Arabuluculuk
1
0%
/
0%
Süresi dolmuş
7
28%
Serbest
6
Derecelendirme
Projeler
641
41%
Arabuluculuk
25
48%
/
36%
Süresi dolmuş
46
7%
Çalışıyor
7
Derecelendirme
Projeler
18
28%
Arabuluculuk
4
50%
/
50%
Süresi dolmuş
1
6%
Serbest
8
Derecelendirme
Projeler
246
74%
Arabuluculuk
7
100%
/
0%
Süresi dolmuş
1
0%
Serbest
Yayınlandı: 1 makale
9
Derecelendirme
Projeler
186
41%
Arabuluculuk
24
58%
/
21%
Süresi dolmuş
13
7%
Serbest
Benzer siparişler
TraderBlox AI made this RSI bot – anyone speak MQL5?
200 - 300 USD
Anyone with experience in trading bots? I'm using TraderBlox ( https://traderblox.com/ ) and the AI assistant generated a bot with RSI that's showing a 68% win rate in backtesting. However, the generated code has some parts " Important: I will only reply to those who send me a photo of their project and have read this; this way I rule out bots. "I don't fully understand (especially order management and dynamic
Ich möchte einen professionellen Expert Advisor (EA) für MetaTrader 5 entwickeln lassen, der sich funktional am ThunderGold Scalper orientiert. Instrument: XAUUSD / GOLD Zeitrahmen: M15 Plattform: MetaTrader 5 / MQL5 Der EA soll eine eigene, nachprogrammierte Strategie verwenden und keine geschützten Quellcodes oder proprietären Dateien des Originalprodukts kopieren. Gewünschte Funktionen: automatischer Handel auf
XAGUSD MT5 Automated Trading Expert Advisor
30 - 200 USD
I need a fully automated Expert Advisor (EA) written in MQL5 for MetaTrader 5. The EA must work directly inside MT5 and must NOT require TradingView, PineConnector, webhooks, or another external connector to place trades. Trading Instrument Primary symbol: XAGUSD (Silver) My broker may display the symbol as XAGUSD-ECN, so the EA should work with the broker’s available XAGUSD symbol. Main entry timeframe: 5-minute
Hi, I am looking for a profitable manual strategy for trading in forex, no bot no EA , only EA. I want to make good profit.If any one has please let me know, i will test it and if satisfied only i will make the payment. Regards
SmartMove_EA
30+ USD
I need a EA programer to program my EA for MLQ5 to sell at the last candle before impulses to the downside(-) and buy on the last candle before the upside(+) movement. For the take profit we target the nearest high for buy and target nearest low for sell.Stop loss on the last weak of the order block
GoldTrade EA
89+ USD
//+------------------------------------------------------------------+ //| XAUUSD Wolfe + SMC Quick Profit EA | //| MT5 / MQL5 | //+------------------------------------------------------------------+ #property strict #include <Trade/Trade.mqh> CTrade trade; //================================================================== // INPUTS //================================================================== //--- General
Trading view indicator fixing
30+ USD
can you help me with I have an indicator that I built and I work with PickMyTrade. The entries come through the alerts I get from Trading View . Trading View needs to send an alert and PickMyTrade executes a trade at that exact same second. Now, I have a problem in Trading View with the synchronization between the alert and the signal. I have a box that I built for a trade. It needs to output the box and get an
Looking for a developer in NinjaTrader For coding Inst - ES,NQ Chart type - Tick, range, volume & time Brief- Fib levels mapped on chart which act as entries, tgts and stops all based on candle close. (Maybe) use MACD for filtering direction. Daily manual input of the TWO fib Anchor levels is part of the strategy. I need a well experienced developer to bid and before biding check the attached file well. the PDF and
Експерт по хибному пробою
30 - 50 USD
Потрібен робот, який відкриває відкладені ордери в напрямку, протилежному поточній ринковій ціні (ордер Sell Stop, якщо ринкова ціна вище, і ордер Buy Stop, якщо ринкова ціна нижче). Модельований сценарій – хибний прорив
1- The EA must h ave a unique strategy specialized on make trades with very very low RRR, so basicaly risking 1475$ to make 100$, with an ammount adjustable of trades per day. (This is very important that i wish in 100 trades, it makes a maximum of 10 trades of mistake, maybe less...) 2- The EA must have the strategy specialized on INDEX CFD. 3- The EA must make each trade with more than 3 minutes, and less than 12h
Proje bilgisi
Bütçe
50+ USD
Son teslim tarihi
from 1 to 3 gün