All orders
Rules
Watch how to order a trading robot
Read the Rules before you post an order or execute it
How to Order a Trading Robot in MQL5 and MQL4
See a sample Requirements Specification to order a robot
New orders in the category:
30 - 80 USD
200 - 300 USD
30+ USD
30+ USD
500 - 1500 USD
100 - 500 USD
30 - 70 USD
57+ USD
Specification
MetaTrader 4 (MT4) script that implements a channel breakout strategy. This script will use the "HHLLIndicator" and "Average Daily Range (ADR)" indicators to make trading decisions.
Logic Overview:
Indicators: The script will utilize two custom indicators: "HHLLIndicator" to identify Highest High (HH) and Lowest Low (LL) and "ADR" to calculate the Average Daily Range.
Timeframe: The strategy will be applied on the 15-minute (M15) chart.
Entry Conditions:
Average Daily Range (ADR) Check: The script will calculate the ADR using the "ADR" indicator. If the ADR is greater than or equal to 100 pips, the script will proceed with the strategy. Otherwise, it will not trade.
HH and LL Calculation: The "HHLLIndicator" will be used to calculate the Highest High (HH) and Lowest Low (LL) on the 15-minute chart.
Entry Levels: The script will calculate entry levels for both long (buy) and short (sell) positions.
Buy Stop: Above the HH by a specified number of pips.
Sell Stop: Below the LL by a specified number of pips.
Pending Orders:
The script will check for existing pending orders and delete them to avoid duplication.
Order Placement:
The script will place pending buy-stop and sell-stop orders at the calculated levels.
Trailing Stop:
If the Trailing Step Stop is enabled (not set to -1), the script will not set trailing stops.
If the Trailing Step Stop is set to -1, the script will set trailing stops for both buy and sell orders. The trailing stop will initially be set at "TrailingStopStart" pips, and it will step by "TrailingStepSteps" pips as the price moves in favor of the trade.
Detailed Task:
Create a new script in MetaEditor and name it "ChannelBreakout.mq4."
Define the necessary input parameters at the beginning of the script. These parameters include:
StopLoss: Stop Loss in pips (0 for automatic calculation).
TakeProfit: Take Profit in pips (0 for automatic calculation).
ADRThreshold1: ADR threshold for the first condition (e.g., 100).
ADRThreshold2: ADR threshold for the second condition (e.g., 175).
EntryOffsetPips: Offset for entry orders (e.g., 10).
EntryHourGMT: Hour to enter pending orders in GMT time (e.g., 23).
RiskRewardRatio: Risk-reward ratio (e.g., 3.0).
TrailingStopStart: Initial Trailing Stop in pips (e.g., 30).
TrailingStepSteps: Trailing Step in pips (e.g., 20).
TrailingStepStop: Trailing Step Stop (use StopLoss or set to -1 for trailing) (e.g., -1).
MagicNumber: Magic Number for orders (e.g., 0).
BuyStopAboveLL: Buy Stop Offset above Lowest Low in pips (e.g., 10).
SellStopBelowHH: Sell Stop Offset below Highest High in pips (e.g., 10).
In the "OnInit" function, create handles for the "HHLLIndicator" and "ADR" indicators. These handles will allow you to access the indicator values later.
In the "OnDeinit" function, delete the indicator handles to free up resources.
In the "OnTick" function, implement the trading logic based on the steps mentioned in the logic overview. Specifically:
Calculate the ADR using the "ADR" indicator on the 15-minute chart.
Check if ADR is greater than or equal to "ADRThreshold1." If not, do not proceed with trading.
Calculate HH and LL using the "HHLLIndicator" on the 15-minute chart.
Calculate entry levels for buy and sell orders based on HH, LL, BuyStopAboveLL, and SellStopBelowHH.
Check for existing pending orders and delete them.
Place pending buy-stop and sell-stop orders at the calculated levels.
If "TrailingStepStop" is set to -1, set trailing stops for both buy and sell orders.
Create a function to delete pending orders called "DeletePendingOrders." This function should iterate through existing orders and delete buy-stop and sell-stop orders.
Create a function to set trailing stops called "SetTrailingStop." This function should calculate the appropriate trailing stop level based on the current price and trailing parameters.
Save and compile the script.
Attach the "ChannelBreakout.mq4" script to a 15-minute chart in MetaTrader.
Ensure that the "HHLLIndicator" and "ADR" indicators are properly installed and available in MetaTrader.
Test the script in a demo account to ensure it behaves as expected and follows the defined logic.
The strategy now it has erros and dont work as should
In the atachment you have all teh script and the EA the chart must display the
ADR =day value
Details aboout postions
Positions
SL
TP
Working/Slipping
Must work on any time frame and calculate the ADR
HH and LL lines above the candle
I need to know how long you need and how much you want to be pay the job is for 2-3 h max
Debug report
back testing report
No errors or warning
Zomm and interview is amust before job will be acceptd
Logic Overview:
Indicators: The script will utilize two custom indicators: "HHLLIndicator" to identify Highest High (HH) and Lowest Low (LL) and "ADR" to calculate the Average Daily Range.
Timeframe: The strategy will be applied on the 15-minute (M15) chart.
Entry Conditions:
Average Daily Range (ADR) Check: The script will calculate the ADR using the "ADR" indicator. If the ADR is greater than or equal to 100 pips, the script will proceed with the strategy. Otherwise, it will not trade.
HH and LL Calculation: The "HHLLIndicator" will be used to calculate the Highest High (HH) and Lowest Low (LL) on the 15-minute chart.
Entry Levels: The script will calculate entry levels for both long (buy) and short (sell) positions.
Buy Stop: Above the HH by a specified number of pips.
Sell Stop: Below the LL by a specified number of pips.
Pending Orders:
The script will check for existing pending orders and delete them to avoid duplication.
Order Placement:
The script will place pending buy-stop and sell-stop orders at the calculated levels.
Trailing Stop:
If the Trailing Step Stop is enabled (not set to -1), the script will not set trailing stops.
If the Trailing Step Stop is set to -1, the script will set trailing stops for both buy and sell orders. The trailing stop will initially be set at "TrailingStopStart" pips, and it will step by "TrailingStepSteps" pips as the price moves in favor of the trade.
Detailed Task:
Create a new script in MetaEditor and name it "ChannelBreakout.mq4."
Define the necessary input parameters at the beginning of the script. These parameters include:
StopLoss: Stop Loss in pips (0 for automatic calculation).
TakeProfit: Take Profit in pips (0 for automatic calculation).
ADRThreshold1: ADR threshold for the first condition (e.g., 100).
ADRThreshold2: ADR threshold for the second condition (e.g., 175).
EntryOffsetPips: Offset for entry orders (e.g., 10).
EntryHourGMT: Hour to enter pending orders in GMT time (e.g., 23).
RiskRewardRatio: Risk-reward ratio (e.g., 3.0).
TrailingStopStart: Initial Trailing Stop in pips (e.g., 30).
TrailingStepSteps: Trailing Step in pips (e.g., 20).
TrailingStepStop: Trailing Step Stop (use StopLoss or set to -1 for trailing) (e.g., -1).
MagicNumber: Magic Number for orders (e.g., 0).
BuyStopAboveLL: Buy Stop Offset above Lowest Low in pips (e.g., 10).
SellStopBelowHH: Sell Stop Offset below Highest High in pips (e.g., 10).
In the "OnInit" function, create handles for the "HHLLIndicator" and "ADR" indicators. These handles will allow you to access the indicator values later.
In the "OnDeinit" function, delete the indicator handles to free up resources.
In the "OnTick" function, implement the trading logic based on the steps mentioned in the logic overview. Specifically:
Calculate the ADR using the "ADR" indicator on the 15-minute chart.
Check if ADR is greater than or equal to "ADRThreshold1." If not, do not proceed with trading.
Calculate HH and LL using the "HHLLIndicator" on the 15-minute chart.
Calculate entry levels for buy and sell orders based on HH, LL, BuyStopAboveLL, and SellStopBelowHH.
Check for existing pending orders and delete them.
Place pending buy-stop and sell-stop orders at the calculated levels.
If "TrailingStepStop" is set to -1, set trailing stops for both buy and sell orders.
Create a function to delete pending orders called "DeletePendingOrders." This function should iterate through existing orders and delete buy-stop and sell-stop orders.
Create a function to set trailing stops called "SetTrailingStop." This function should calculate the appropriate trailing stop level based on the current price and trailing parameters.
Save and compile the script.
Attach the "ChannelBreakout.mq4" script to a 15-minute chart in MetaTrader.
Ensure that the "HHLLIndicator" and "ADR" indicators are properly installed and available in MetaTrader.
Test the script in a demo account to ensure it behaves as expected and follows the defined logic.
The strategy now it has erros and dont work as should
In the atachment you have all teh script and the EA the chart must display the
ADR =day value
Details aboout postions
Positions
SL
TP
Working/Slipping
Must work on any time frame and calculate the ADR
HH and LL lines above the candle
I need to know how long you need and how much you want to be pay the job is for 2-3 h max
Debug report
back testing report
No errors or warning
Zomm and interview is amust before job will be acceptd
Responded
1
Rating
Projects
90
29%
Arbitration
24
13%
/
58%
Overdue
7
8%
Working
2
Rating
Projects
228
80%
Arbitration
22
27%
/
50%
Overdue
11
5%
Free
Published: 24 articles, 1882 codes
3
Rating
Projects
80
10%
Arbitration
38
8%
/
58%
Overdue
6
8%
Free
4
Rating
Projects
4
0%
Arbitration
4
25%
/
75%
Overdue
1
25%
Free
5
Rating
Projects
25
4%
Arbitration
1
0%
/
0%
Overdue
7
28%
Free
6
Rating
Projects
641
41%
Arbitration
25
48%
/
36%
Overdue
46
7%
Working
7
Rating
Projects
18
28%
Arbitration
4
50%
/
50%
Overdue
1
6%
Free
8
Rating
Projects
246
74%
Arbitration
7
100%
/
0%
Overdue
1
0%
Free
Published: 1 article, 1 code
9
Rating
Projects
186
41%
Arbitration
24
58%
/
21%
Overdue
13
7%
Free
Similar orders
Custom MT5 Trading Robot for Gold and Forex
200 - 300 USD
Project: Custom MT5 Day Trading Expert Advisor I need a custom automated trading robot (EA) for MetaTrader 5, developed in MQL5. Markets: - Gold (XAUUSD) - Selected Forex pairs Trading style: Automated day trading. All positions should be closed according to predefined strategy rules and before the end of the selected trading session. Strategy: The developer should propose a clear trading strategy, explain its rules
Ninjascript strategy tester
30+ USD
Hi, I need NinjaTrader 8 Strategy Analyzer backtests on two of my strategies, each over 1 year AND 3 years of data. Please quote the full job. Common settings: NT8 Strategy Analyzer, MCL (Micro WTI Crude Oil) continuous front-month contract (MCL ##-##), 5-minute bars, 1yr + 3yr of the most recent data, $2.50 round-turn commission per contract. Deliverables per run: full Strategy Analyzer summary (net profit, profit
1. Overview Build an MQL5 Expert Advisor for MetaTrader 5 that trades XAUUSD (Gold) as a scalper, using Heiken Ashi candles and a 50 EMA for entries. 2. Platform and symbol MetaTrader 5, Expert Advisor (.mq5 and compiled .ex5) Symbol: XAUUSD (must work with broker suffixes, e.g. XAUUSDm) Default timeframe: M5 (configurable; M1 to M15 should work) 3. Indicators Heiken Ashi candles, calculated inside the EA (no
a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; } Project Description I need an Expert Advisor (EA) for MetaTrader 5 (MT5) that can automatically trade Gold (XAUUSD) and major Forex pairs. The EA must analyze market conditions, open and close trades automatically, manage risk effectively, and be fully compatible with the MT5 Strategy Tester
MQL5/MT5 TRADING BOT
57+ USD
Hi i'm looking for a trading bot that will trade on mt5/MQL5. The bot must be able to follow trend and works on any pair,chart and symbol. All distance measured with ATR. Trend from a higher time frame (default H1) with a moving average;UP/DOWN. Support and resistance found automatically from recent swing highs and low nothing drawn on the chart. Two kinds of trades, each can be switched on/off. S/R trades; price
EA-MT5-XAUUSD-PuPrime-Live6 +10%/m
30 - 200 USD
I am looking for an EA using MT5, trading XAUUSD on PuPrime-Live6, Standard account. LIMITATIONS No martingale, no grid. Start equity 1000 EUR. Leverate 1:500 Account in USD. PuPrime-Live6 All settings (risk, time, drawdown %, cooldown, lot size) shall be adjustable on init or backtest. VERIFICATIONS The EA needs to reach the profit goals on Actual Ticks, 100ms slippage in backtests for each month 2026. profit goal
To create a unique description that meets the freelance site's requirements, you can type the following: "I am looking for an experienced MQL5 developer to create a custom Forex Expert Advisor. The trading strategy should be based on a moving average crossover system, filtered by the Relative Strength Index indicator. The expert advisor needs to feature distinct strategy modules with adjustable settings for the
Custom MT5 Expert Advisor (EA) Development | MQL5 Automation Turn Your Trading Strategy into a Powerful Automated Trading System! Are you looking for a professional MT5 Expert Advisor developer to automate your trading strategy? I specialize in developing custom MetaTrader 5 (MT5) Expert Advisors and indicators using MQL5 , tailored to your trading rules, risk management preferences, and trading goals. Whether you
Scalping bort
30+ USD
GOLD SCALPING BOT STRATEGY Symbol: XAUUSD (Gold vs USD) Broker: Exness Account: Standard Starting Balance: $20 1. TIMEFRAME - Trend analysis: M15. - Entry timeframe: M5. - Trade only when the market has a clear direction. 2. INDICATORS - EMA 50 - EMA 200 - RSI 14 - Support and Resistance 3. BUY RULES The bot must open a BUY trade only when all these conditions are met: 1. EMA 50 is above EMA 200 on M15. 2. Price is
MT5 Multi-Market Trading Robot and Signal System
50 - 200 USD
Hello, I am looking for an experienced MQL5 developer to create a professional, reliable, fully customizable Expert Advisor (EA) and trading signal system for MetaTrader 5. 1. Supported Markets The EA must support: Gold (XAUUSD) Silver (XAGUSD) Nasdaq 100 (NAS100/US100) Forex currency pairs Bitcoin (BTCUSD) It must work with MT5 brokers, including Tickmill, where these instruments are available. 2. Two Trading Modes
Project information
Budget
50+ USD
Deadline
from 1 to 3 day(s)