仕事が完了した
実行時間68 日
指定
Hello !
I use the SS_SupportResistance indicator and I love it :
It draw zones based on Fractals.
But I would like to have Daily, Weekly and Monthly Pivot point supports (S1,S2,S3) and
resistances (R1,R2,R3) to be drawed as zone like the rests and merged when they overlap.
Daily, Weekly and Monthly should be switched with parameters.
This it the part that get the zone, it should be easy to add the
Pivot Points supports and resistances :
The whole indicator is attached.
void FindZones() { int i, j, shift, bustcount=0, testcount = 0; double hival, loval; bool turned = false, hasturned = false; double temp_hi[1000], temp_lo[1000]; int temp_start[1000], temp_hits[1000], temp_strength[1000], temp_count = 0; bool temp_turn[1000], temp_merge[1000]; int merge1[1000], merge2[1000], merge_count = 0; // iterate through zones from oldest to youngest (ignore recent 5 bars), // finding those that have survived through to the present... for (shift=MathMin(iBars(NULL, TimeFrame)-1, BackLimit); shift>IgnoreShift; shift--) { double atr = iATR(NULL, TimeFrame, 7, shift); double fu = atr/2 * zone_fuzzfactor; bool isWeak; bool touchOk = false; bool isBust = false; double close = iClose(NULL, TimeFrame, shift); double high = iHigh(NULL, TimeFrame, shift); double low = iLow(NULL, TimeFrame, shift); double hi_i; double lo_i; if (FastUpPts[shift] > 0.001) { // a zigzag high point isWeak = true; if (SlowUpPts[shift] > 0.001) isWeak = false; hival = high; if (zone_extend == true) hival += fu; loval = MathMax(MathMin(close, high-fu), high-fu*2); turned = false; hasturned = false; isBust = false; bustcount = 0; testcount = 0; for (i=shift-1; i>=0; i--) { hi_i = iHigh(NULL, TimeFrame, i); lo_i = iLow(NULL, TimeFrame, i); if ((turned == false && FastUpPts[i] >= loval && FastUpPts[i] <= hival) || (turned == true && FastDnPts[i] <= hival && FastDnPts[i] >= loval)) { // Potential touch, just make sure its been 10+candles since the prev one touchOk = true; for (j=i+1; j<i+11; j++) { if ((turned == false && FastUpPts[j] >= loval && FastUpPts[j] <= hival) || (turned == true && FastDnPts[j] <= hival && FastDnPts[j] >= loval)) { touchOk = false; break; } } if (touchOk == true) { // we have a touch. If its been busted once, remove bustcount // as we know this level is still valid & has just switched sides bustcount = 0; testcount++; } } if ((turned == false && hi_i > hival) || (turned == true && lo_i < loval)) { // this level has been busted at least once bustcount++; if (bustcount > 1 || isWeak == true) { // busted twice or more isBust = true; break; } if (turned == true) turned = false; else if (turned == false) turned = true; hasturned = true; // forget previous hits testcount = 0; } } if (isBust == false) { // level is still valid, add to our list temp_hi[temp_count] = hival; temp_lo[temp_count] = loval; temp_turn[temp_count] = hasturned; temp_hits[temp_count] = testcount; temp_start[temp_count] = shift; temp_merge[temp_count] = false; if (testcount > 3) temp_strength[temp_count] = ZONE_PROVEN; else if (testcount > 0) temp_strength[temp_count] = ZONE_VERIFIED; else if (hasturned == true) temp_strength[temp_count] = ZONE_TURNCOAT; else if (isWeak == false) temp_strength[temp_count] = ZONE_UNTESTED; else temp_strength[temp_count] = ZONE_WEAK; temp_count++; } } else if (FastDnPts[shift] > 0.001) { // a zigzag low point isWeak = true; if (SlowDnPts[shift] > 0.001) isWeak = false; loval = low; if (zone_extend == true) loval -= fu; hival = MathMin(MathMax(close, low+fu), low+fu*2); turned = false; hasturned = false; bustcount = 0; testcount = 0; isBust = false; for (i=shift-1; i>=0; i--) { hi_i = iHigh(NULL, TimeFrame, i); lo_i = iLow(NULL, TimeFrame, i); if ((turned == true && FastUpPts[i] >= loval && FastUpPts[i] <= hival) || (turned == false && FastDnPts[i] <= hival && FastDnPts[i] >= loval)) { // Potential touch, just make sure its been 10+candles since the prev one touchOk = true; for (j=i+1; j<i+11; j++) { if ((turned == true && FastUpPts[j] >= loval && FastUpPts[j] <= hival) || (turned == false && FastDnPts[j] <= hival && FastDnPts[j] >= loval)) { touchOk = false; break; } } if (touchOk == true) { // we have a touch. If its been busted once, remove bustcount // as we know this level is still valid & has just switched sides bustcount = 0; testcount++; } } if ((turned == true && hi_i > hival) || (turned == false && lo_i < loval)) { // this level has been busted at least once bustcount++; if (bustcount > 1 || isWeak == true) { // busted twice or more isBust = true; break; } if (turned == true) turned = false; else if (turned == false) turned = true; hasturned = true; // forget previous hits testcount = 0; } } if (isBust == false) { // level is still valid, add to our list temp_hi[temp_count] = hival; temp_lo[temp_count] = loval; temp_turn[temp_count] = hasturned; temp_hits[temp_count] = testcount; temp_start[temp_count] = shift; temp_merge[temp_count] = false; if (testcount > 3) temp_strength[temp_count] = ZONE_PROVEN; else if (testcount > 0) temp_strength[temp_count] = ZONE_VERIFIED; else if (hasturned == true) temp_strength[temp_count] = ZONE_TURNCOAT; else if (isWeak == false) temp_strength[temp_count] = ZONE_UNTESTED; else temp_strength[temp_count] = ZONE_WEAK; temp_count++; } } } // look for overlapping zones... if (zone_merge == true) { merge_count = 1; int iterations = 0; while (merge_count > 0 && iterations < 3) { merge_count = 0; iterations++; for (i = 0; i < temp_count; i++) temp_merge[i] = false; for (i = 0; i < temp_count-1; i++) { if (temp_hits[i] == -1 || temp_merge[j] == true) continue; for (j = i+1; j < temp_count; j++) { if (temp_hits[j] == -1 || temp_merge[j] == true) continue; if ((temp_hi[i] >= temp_lo[j] && temp_hi[i] <= temp_hi[j]) || (temp_lo[i] <= temp_hi[j] && temp_lo[i] >= temp_lo[j]) || (temp_hi[j] >= temp_lo[i] && temp_hi[j] <= temp_hi[i]) || (temp_lo[j] <= temp_hi[i] && temp_lo[j] >= temp_lo[i])) { merge1[merge_count] = i; merge2[merge_count] = j; temp_merge[i] = true; temp_merge[j] = true; merge_count++; } } } // ... and merge them ... for (i=0; i<merge_count; i++) { int target = merge1[i]; int source = merge2[i]; temp_hi[target] = MathMax(temp_hi[target], temp_hi[source]); temp_lo[target] = MathMin(temp_lo[target], temp_lo[source]); temp_hits[target] += temp_hits[source]; temp_start[target] = MathMax(temp_start[target], temp_start[source]); temp_strength[target] = MathMax(temp_strength[target], temp_strength[source]); if (temp_hits[target] > 3) temp_strength[target] = ZONE_PROVEN; if (temp_hits[target] == 0 && temp_turn[target] == false) { temp_hits[target] = 1; if (temp_strength[target] < ZONE_VERIFIED) temp_strength[target] = ZONE_VERIFIED; } if (temp_turn[target] == false || temp_turn[source] == false) temp_turn[target] = false; if (temp_turn[target] == true) temp_hits[target] = 0; temp_hits[source] = -1; } } } // copy the remaining list into our official zones arrays zone_count = 0; for (i=0; i<temp_count; i++) { if (temp_hits[i] >= 0 && zone_count < 1000) { zone_hi[zone_count] = temp_hi[i]; zone_lo[zone_count] = temp_lo[i]; zone_hits[zone_count] = temp_hits[i]; zone_turn[zone_count] = temp_turn[i]; zone_start[zone_count] = temp_start[i]; zone_strength[zone_count] = temp_strength[i]; if (zone_hi[zone_count] < Close[4]) zone_type[zone_count] = ZONE_SUPPORT; else if (zone_lo[zone_count] > Close[4]) zone_type[zone_count] = ZONE_RESIST; else { for (j=5; j<1000; j++) { if (iClose(NULL, TimeFrame, j) < zone_lo[zone_count]) { zone_type[zone_count] = ZONE_RESIST; break; } else if (iClose(NULL, TimeFrame, j) > zone_hi[zone_count]) { zone_type[zone_count] = ZONE_SUPPORT; break; } } if (j == 1000) zone_type[zone_count] = ZONE_SUPPORT; } zone_count++; } } }
応答済み
1
評価
プロジェクト
93
49%
仲裁
18
56%
/
17%
期限切れ
38
41%
暇
2
評価
プロジェクト
1119
43%
仲裁
47
49%
/
23%
期限切れ
84
8%
暇
3
評価
プロジェクト
2820
80%
仲裁
156
22%
/
43%
期限切れ
488
17%
暇
類似した注文
I have an indicator i need automated i use it manually and it plots arrows. Can you automate it for my Ninjatrader8? Do you need to see file? Expert Ninjatrader Developer can Bid for this project
Hi, im not looking into developing a new EA. I am looking into purchasing an existing EA that can deliver such results like: mq5 source, 4‑year backtest (2022‑2025) report, equity curve, trade list, strategy description, and 1‑month demo access. Please without concrete prove of experience functioning existing EA working perfectly and as contained on my description, then we can't strike a deal. Thank you
Project Overview We are seeking an experienced MetaTrader 5 (MT5) / MQL5 developer to design and build a production-ready Expert Advisor intended for live trading with capital at risk . This is not a hobby, experimental, or retail-grade EA. We are only interested in developers with proven experience delivering robust, well-tested MT5 systems . Project Objective Design and implement a high-quality MT5 Expert Advisor
I have a simple strategy that need coding on tradingview Strategy using high low at seleted time and when breakout to entry buy sell. Everything will be explained on private
The strategy is based on years of manual testing. Detailed requirements including custom indicator settings (VWAP, Kalman RSI, BrkVol etc.) will be provided. I am looking for a high-level MQL5 developer to build a robust Expert Advisor (EA) based on a proven strategy using 11 specific indicators. The system is designed for high-precision entries by filtering market noise and spikes. Key Requirements: •
Ninjatrader strategy to MT4
30+ USD
Hey bro, can you help with NT8. On a vps, multiple algos and prop account but the strategies keep getting out of sync, going from true to false for no reason….. mid trade it pops errors.The algo codes are locked… other than that it’s open VPs, NT8 and strategy is open You will notice in the strategies xml that there are standard, then 100k and 50k versions…… Also I did version that are in strategy labeled "Apex"
I'm looking for a proven scalping expert (M1-M5) to help define and apply a successful strategy for prop firm-funded accounts. Must respect prop firm rules (details below). *Requirements:* - No gambling methods, high-frequency trades, hedging, or trades under 2 minutes - Lot size: max 40, ideally <20 - Provide MT4/MT5 trade history (1 week minimum, 1 month preferred) as PDF *Terms:* - Price negotiable, potentially
So the things we need in algorithm of mql5 language EA in mt5 1. Depending on timeframe it can recognise the previous swing high and low 2. Timeframe is 5m,15m,1h,4h 3. It can recognise the basic Market bias that is market is bullish or bearish we can identify using (ema,rsi,basic smc bias,ict bias structure mapping) or use anything to find bias structure 4. EA should have option to change timeframe and change risk
require the development of a high-speed, fully automated trading Expert Advisor (EA) for MetaTrader 5 , optimized for live trading on both Deriv and Exness . The EA must be designed for fast execution, low latency, and reliability on real-money accounts , with full compatibility across broker-specific contract specifications, tick sizes, tick values, pricing formats, and volume rules. It should automatically detect
Specification Revised Project Description We need a MetaTrader 4/5 Expert Advisor that lets you (the master trader) broadcast every trade to all of your client accounts in real time. The solution must work across the entire country, so it should use a MetaQuotes ID link (or any other method the developer recommends) to identify the master account and allow unlimited clients to subscribe. *Key Requirements* -
プロジェクト情報
予算
65+ USD
締め切り
最高 5 日
