Bjorn Lynge Larsen / Profilo

🎉 +100% ROI CELEBRATION: 48-HOUR 20% OFF FLASH SALE

Hi everyone,

To celebrate Night Scalper doubling the live signal account (+102% ROI with just 5% max drawdown), I’m running a 20% price reduction directly on the MQL5 marketplace for the next 48 hours. You can get Night Scalper for $159 instead of $199!

⏳ Deadline: The price goes back up to standard pricing at 7:00 AM UTC on Tuesday, August 4th.

If you’ve been watching the live signal and waiting for the right moment to get onboard, this is your chance.

👉 Check out Night Scalper: https://www.mql5.com/en/market/product/124331

Have a great day!

📈 NIGHT SCALPER: +1.49% TODAY | New signal ATH: +85.98%

After a couple of slow weeks, we're back on track!

We've had a great start to the week with a total gain of 1.9% so far, pushing the signal account to a new all time high of 85.98%.

👉 Check out the live signal here: https://www.mql5.com/en/signals/2367552

Like I state in the product description: Night Scalper is a patient EA that doesn't trade all the time. If you want a safe, set and forget long term system to add to your portfolio, this is it.

If you haven't already grabbed a copy of Night Scalper, you can find it here:

👉 Get Night Scalper on MQL5 here: https://www.mql5.com/en/market/product/124331

⚠️ Important Note on Performance & Spreads:

Because Night Scalper operates during rollover session, execution and spreads vary wildly from broker to broker. If your live results differ substantially from my live signal, it means your broker's spreads are too wide.

To get the exact same raw spreads and execution speeds that I use, I highly recommend switching to my partner broker. Just reach out to me here on MQL5 and I'll help you get setup.

Let the EA do its thing and have a long term mindset.

Have a great day everyone!

⚙️ Small Update For Night Scalper (V 1.48)

Hi guys,

I always try to listen to your feedback and implement the best ideas, and today someone brought up a great point.

The "Highest Account Size" feature was needlessly complicated and causing some confusion, so I decided to remove it. Moving forward, the auto-lot calculation will simply use your current balance.

To replace it and give you even better risk control, I have added a new input: Account Allocation Percentage.

Now, you can decide exactly what percentage of your account balance Night Scalper is allowed to use for its lot calculations (adjustable from 5% to 100%, in 5% increments).

Why this is useful:

🤝 Multi-EA Setup: Perfect for those of you who want to run other EAs on the same account without Night Scalper hogging all the margin.

🛡 Profit Protection: If you want to keep your earned profits out of the active risk calculations, you can easily scale your percentage down.

I’ll attach the updated setup guide to this message so you can see the new settings.

If you run into any technical issues or have any questions, feel free to DM me here on MQL5.

I want to say a massive thank you to all of you. I truly appreciate the continuous support and constructive feedback. You guys help me catch small errors and bugs faster than I ever could alone, and I’ll keep doing my best to build and improve high-quality products for this community.

Have a great day, and thank you again!

⚙️ Quick Fix For Night Scalper

Hi everyone.

Just uploaded a quick fix for Night Scalper to MQL5.

There was a bug in the highest account size calculation. Should be fixed now, so please update your EA to version 1.47.

The setup guide is the same as for version 1.46.

🚀 Night Scalper V1.46 Major Update is LIVE!

The latest version (V1.46) of Night Scalper is officially approved and ready to download on MQL5.

Like I said, the default AUDNZD limit order strategy is still the absolute gold standard for this strategy.

However, I have unlocked a lot more of the backend and given you new features, to give you more control over backtesting, execution, and risk management.

Here is what’s new in this update:

✅ On-Chart Risk Overview: Added a clean dashboard showing your exact risk parameters in real-time (Risk mode, balance/equity used for lot calculation, and your upcoming lot size).

✅ Experimental Market Orders: Added a new execution mode if you want to use Market Orders instead of the standard Limit Orders, complete with separate Max Spread limits for pre- and post-rollover windows. (Note: Limit orders remain the default and recommended method to avoid slippage).

✅ BUY and SELL Entry Shifts: Added individual BUY and SELL entry shift settings (in points). You can now adjust how aggressive or conservative Night Scalper will place the entries at.

✅ Order Distance Multiplier: Total control over the spacing between your orders. Lower the multiplier to tighten the distance and potentially increase trade frequency.

✅ Trading Window Control: You are no longer restricted to hour blocks. You can now define your pre-rollover and post-rollover trading windows down to the exact minute.

✅ Ask Line Visualizer: Added a toggle to draw the Ask line directly on your chart. This allows you to visually monitor the true rollover spread in real-time and see exactly why trades are (or aren't) triggering.

✅ Custom Profit Compounding: Added a scaling option allowing you to dictate the exact percentage of your total profits to be used when calculating new lot sizes, giving you more control over your growth curve.

You can find Night Scalper here: https://www.mql5.com/en/market/product/124331

Download the new setup guide here: https://nocapfx.com/Guides/Night_Scalper_Setup_Guide.pdf

As always, DM me if you have any questions or need any help.

I hope you enjoy the update and have a nice day guys 🙂

⚠️ CRITICAL UPDATE: SYSTEM BUG & APOLOGY

Hi everyone.

I need to address a critical coding error on my end, and I want to be completely transparent about it.

I made a mistake in the logic for the Inp_CloseTradesInProfit parameter. The intention of this setting was that if set to 'true', the timed close function would close all trades at the cutoff time, including profitable ones.

Due to an error in my code, if this setting was true, the EA only closed trades that were in profit, leaving losing trades open, instead of closing them when it should.

Because of my mistake, several of you had losing trades remain open much longer than the risk parameters intended, resulting in unnecessary losses today.

There are no excuses for this. It is a failure on my part and I take full responsibility for the losses this bug caused. It is not the standard I set for myself or my brand.

✅ THE FIX (VERSION 1.45):

I have rewritten the logic, and a patched version of Night Scalper has already been uploaded to MQL5.

Action Required:

1. Please go to your MQL5 terminal and update to the newest version immediately.

2. Ensure all open trades are closed manually if they bypassed your intended time-cutoff.

I am deeply sorry to those of you who took a hit today because of my oversight. I am implementing stricter code review on my end to ensure an error like this does not happen again.

If anyone was affected by this and needs help configuring the new update, DM me directly here on MQL5

🔥 NIGHT SCALPER UPDATE - NEW VERSION 1.42 ON MQL5 MARKET

Hi everyone.

I just uploaded a new version of Night Salper on the MQL5 market, so make sure to update your version.

Apparently some brokers had their rollover time set to 24:00, which is a time that cannot exist, so the EA set the rollover time to 00:00, which means it basically would trade the whole day. This should be fixed now.

Also added extra checks/protection for pending orders, so they should expire at the correct time now.

I apologies for the frequent updates at the moment, but as the user base grows, bugs and problems are being discovered faster, so I can fix them faster.

If you find any issues or have any questions, you can contact me directly here on MQL5.

Have a great day!

🔥 NIGHT SCALPER UPDATE - NEW VERSION 1.41 ON MQL5 MARKET

Hi everyone.

I just uploaded a new version of Night Salper on the MQL5 market, so make sure to update your version.

REMEMBER: In order to remove confusion on GMT/timezones, I've tried to make the EA automatically find the rollover time, regardless of brokers GMT time. You can see the times the EA find in the 'Experts' tab on your terminal.

The default settings should be fine and here's the new setup guide: https://www.mql5.com/en/blogs/post/769397

If you find any issues or have any questions, DM me here on MQL5.

Have a great day!

🔥 NIGHT SCALPER UPDATE - NEW VERSION 1.4 ON MQL5 MARKET

Hi everyone.

I just uploaded a new version of Night Salper on the MQL5 market, so make sure to update your version.

I added some extra settings/inputs and fixed some issues.

IMPORTANT: In order to remove confusion on GMT/timezones, I've tried to make the EA automatically find the rollover time, regardless of brokers GMT time. You can see the times the EA find in the 'Experts' tab on your terminal.

I cant check all broker circumstances and combinations, so please reach out to me as soon as possible, if you find any issues with the new update. You can DM me here on MQL5.

The default settings should be fine and I'll update the setup guide on MQL5 tomorrow.

You can find more info on the new version under the 'What's new' tab on the product page of Night Scalper.

Have a great day!

NIGHT SCALPER UPDATE - 28. April 2026


📈 Small win on the live signal today.


Some users had issues with their EA not removing the pending orders at the set time.


Please guys, if you encounter problems with Night Scalper or any future products released by me or your results vary drastically from the live signal., then please reach out to me directly, so I can have a look.


I want you to have the best possibility of success and I can't fix a problem, if I don't know there's a problem.


Have a great day.

Final reminder: Night Scalper price will increase to $149 tonight.

You can find it here: https://www.mql5.com/en/market/product/124331