[ARCHIVIO] Qualsiasi domanda da principiante, per non ingombrare il forum. Professionisti, non passate oltre. Da nessuna parte senza di te - 3. - MQL4 e MetaTrader 4 - Forum sulla programmazione MQL4

Victor Nikolaev 2011.09.22 14:43 #2031

skyjet:
Questa non è una funzione annidata, ma fa parte del MACD Sample EA di base. Sto cercando di aggiungere un lotto calcolato. Principale e unica funzione start()

Bisogna guardare tutto il codice, allora. Quello che avete mostrato è la funzione

noobys 2011.09.22 14:48 #2032

Ecco :) Non so proprio come inserire il calcolo del lotto di cui sopra.

//+------------------------------------------------------------------+
//|                                                  MACD Sample.mq4 |
//|                      Copyright © 2005, MetaQuotes Software Corp. |
//|                                       http://www.metaquotes.net/ |
//+------------------------------------------------------------------+

extern double TakeProfit = 50;
extern double Lots = 0.1;
extern double TrailingStop = 30;
extern double MACDOpenLevel=3;
extern double MACDCloseLevel=2;
extern double MATrendPeriod=26;

//+------------------------------------------------------------------+
//|                                                                  |
//+------------------------------------------------------------------+
int start()
  {
   double MacdCurrent, MacdPrevious, SignalCurrent;
   double SignalPrevious, MaCurrent, MaPrevious;
   int cnt, ticket, total;
// initial data checks
// it is important to make sure that the expert works with a normal
// chart and the user did not make any mistakes setting external 
// variables (Lots, StopLoss, TakeProfit, 
// TrailingStop) in our case, we check TakeProfit
// on a chart of less than 100 bars
   if(Bars<100)
     {
      Print("bars less than 100");
      return(0);  
     }
   if(TakeProfit<10)
     {
      Print("TakeProfit less than 10");
      return(0);  // check TakeProfit
     }
// to simplify the coding and speed up access
// data are put into internal variables
   MacdCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,0);
   MacdPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,1);
   SignalCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,0);
   SignalPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,1);
   MaCurrent=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,0);
   MaPrevious=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,1);

   total=OrdersTotal();
   if(total<1) 
     {
      // no opened orders identified
      if(AccountFreeMargin()<(1000*Lots))
        {
         Print("We have no money. Free Margin = ", AccountFreeMargin());
         return(0);  
        }
      // check for long position (BUY) possibility
      if(MacdCurrent<0 && MacdCurrent>SignalCurrent && MacdPrevious<SignalPrevious &&
         MathAbs(MacdCurrent)>(MACDOpenLevel*Point) && MaCurrent>MaPrevious)
        {
         ticket=OrderSend(Symbol(),OP_BUY,Lots,Ask,3,0,Ask+TakeProfit*Point,"macd sample",16384,0,Green);
         if(ticket>0)
           {
            if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("BUY order opened : ",OrderOpenPrice());
           }
         else Print("Error opening BUY order : ",GetLastError()); 
         return(0); 
        }
      // check for short position (SELL) possibility
      if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious && 
         MacdCurrent>(MACDOpenLevel*Point) && MaCurrent<MaPrevious)
        {
         ticket=OrderSend(Symbol(),OP_SELL,Lots,Bid,3,0,Bid-TakeProfit*Point,"macd sample",16384,0,Red);
         if(ticket>0)
           {
            if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("SELL order opened : ",OrderOpenPrice());
           }
         else Print("Error opening SELL order : ",GetLastError()); 
         return(0); 
        }
      return(0);
     }
   // it is important to enter the market correctly, 
   // but it is more important to exit it correctly...   
   for(cnt=0;cnt<total;cnt++)
     {
      OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
      if(OrderType()<=OP_SELL &&   // check for opened position 
         OrderSymbol()==Symbol())  // check for symbol
        {
         if(OrderType()==OP_BUY)   // long position is opened
           {
            // should it be closed?
            if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious &&
               MacdCurrent>(MACDCloseLevel*Point))
                {
                 OrderClose(OrderTicket(),OrderLots(),Bid,3,Violet); // close position
                 return(0); // exit
                }
            // check for trailing stop
            if(TrailingStop>0)  
              {                 
               if(Bid-OrderOpenPrice()>Point*TrailingStop)
                 {
                  if(OrderStopLoss()<Bid-Point*TrailingStop)
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Bid-Point*TrailingStop,OrderTakeProfit(),0,Green);
                     return(0);
                    }
                 }
              }
           }
         else // go to short position
           {
            // should it be closed?
            if(MacdCurrent<0 && MacdCurrent>SignalCurrent &&
               MacdPrevious<SignalPrevious && MathAbs(MacdCurrent)>(MACDCloseLevel*Point))
              {
               OrderClose(OrderTicket(),OrderLots(),Ask,3,Violet); // close position
               return(0); // exit
              }
            // check for trailing stop
            if(TrailingStop>0)  
              {                 
               if((OrderOpenPrice()-Ask)>(Point*TrailingStop))
                 {
                  if((OrderStopLoss()>(Ask+Point*TrailingStop)) || (OrderStopLoss()==0))
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Ask+Point*TrailingStop,OrderTakeProfit(),0,Red);
                     return(0);
                    }
                 }
              }
           }
        }
     }
   return(0);
  }
// the end.

Victor Nikolaev 2011.09.22 15:09 #2033

skyjet: Ecco :) Non so proprio come inserire il calcolo del lotto di cui sopra.

//+------------------------------------------------------------------+
//|                                                  MACD Sample.mq4 |
//|                      Copyright © 2005, MetaQuotes Software Corp. |
//|                                       http://www.metaquotes.net/ |
//+------------------------------------------------------------------+

extern double TakeProfit = 50;
extern double Lots = 0.1;
extern double TrailingStop = 30;
extern double MACDOpenLevel=3;
extern double MACDCloseLevel=2;
extern double MATrendPeriod=26;

//+------------------------------------------------------------------+
//|                                                                  |
//+------------------------------------------------------------------+
int start()
  {
   double MacdCurrent, MacdPrevious, SignalCurrent;
   double SignalPrevious, MaCurrent, MaPrevious;
   int cnt, ticket, total;
// initial data checks
// it is important to make sure that the expert works with a normal
// chart and the user did not make any mistakes setting external 
// variables (Lots, StopLoss, TakeProfit, 
// TrailingStop) in our case, we check TakeProfit
// on a chart of less than 100 bars
   if(Bars<100)
     {
      Print("bars less than 100");
      return(0);  
     }
   if(TakeProfit<10)
     {
      Print("TakeProfit less than 10");
      return(0);  // check TakeProfit
     }
// to simplify the coding and speed up access
// data are put into internal variables
   MacdCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,0);
   MacdPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,1);
   SignalCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,0);
   SignalPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,1);
   MaCurrent=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,0);
   MaPrevious=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,1);

   total=OrdersTotal();
   if(total<1) 
     {
      // no opened orders identified
      if(AccountFreeMargin()<(1000*Lots))
        {
         Print("We have no money. Free Margin = ", AccountFreeMargin());
         return(0);  
        }
      // check for long position (BUY) possibility
      if(MacdCurrent<0 && MacdCurrent>SignalCurrent && MacdPrevious<SignalPrevious &&
         MathAbs(MacdCurrent)>(MACDOpenLevel*Point) && MaCurrent>MaPrevious)
        {
         ticket=OrderSend(Symbol(),OP_BUY,Lots(),Ask,3,0,Ask+TakeProfit*Point,"macd sample",16384,0,Green);
         if(ticket>0)
           {
            if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("BUY order opened : ",OrderOpenPrice());
           }
         else Print("Error opening BUY order : ",GetLastError()); 
         return(0); 
        }
      // check for short position (SELL) possibility
      if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious && 
         MacdCurrent>(MACDOpenLevel*Point) && MaCurrent<MaPrevious)
        {
         ticket=OrderSend(Symbol(),OP_SELL,Lots(),Bid,3,0,Bid-TakeProfit*Point,"macd sample",16384,0,Red);
         if(ticket>0)
           {
            if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("SELL order opened : ",OrderOpenPrice());
           }
         else Print("Error opening SELL order : ",GetLastError()); 
         return(0); 
        }
      return(0);
     }
   // it is important to enter the market correctly, 
   // but it is more important to exit it correctly...   
   for(cnt=0;cnt<total;cnt++)
     {
      OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
      if(OrderType()<=OP_SELL &&   // check for opened position 
         OrderSymbol()==Symbol())  // check for symbol
        {
         if(OrderType()==OP_BUY)   // long position is opened
           {
            // should it be closed?
            if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious &&
               MacdCurrent>(MACDCloseLevel*Point))
                {
                 OrderClose(OrderTicket(),OrderLots(),Bid,3,Violet); // close position
                 return(0); // exit
                }
            // check for trailing stop
            if(TrailingStop>0)  
              {                 
               if(Bid-OrderOpenPrice()>Point*TrailingStop)
                 {
                  if(OrderStopLoss()<Bid-Point*TrailingStop)
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Bid-Point*TrailingStop,OrderTakeProfit(),0,Green);
                     return(0);
                    }
                 }
              }
           }
         else // go to short position
           {
            // should it be closed?
            if(MacdCurrent<0 && MacdCurrent>SignalCurrent &&
               MacdPrevious<SignalPrevious && MathAbs(MacdCurrent)>(MACDCloseLevel*Point))
              {
               OrderClose(OrderTicket(),OrderLots(),Ask,3,Violet); // close position
               return(0); // exit
              }
            // check for trailing stop
            if(TrailingStop>0)  
              {                 
               if((OrderOpenPrice()-Ask)>(Point*TrailingStop))
                 {
                  if((OrderStopLoss()>(Ask+Point*TrailingStop)) || (OrderStopLoss()==0))
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Ask+Point*TrailingStop,OrderTakeProfit(),0,Red);
                     return(0);
                    }
                 }
              }
           }
        }
     }
   return(0);
  }
// the end.

double Lots()
  {
   double lot;
   lot=(AccountFreeMargin()*AccountLeverage()*Risk)/(MarketInfo(Symbol(), MODE_LOTSIZE));
   lot=NormalizeDouble(lot,1);
   return(lot);
  }

Va più o meno così

noobys 2011.09.22 15:17 #2034

Vinin:
Va più o meno così.

Grazie per il vostro aiuto!

Victor Nikolaev 2011.09.22 15:26 #2035

skyjet:
Grazie per il vostro aiuto!

Solo la funzione di calcolo del lotto dovrebbe essere resa universale

[Eliminato] 2011.09.22 16:02 #2036

Salve.

Sono un principiante in questo settore. Quindi chiedo il vostro aiuto.

Ecco un pezzo di codice:

int start()
  {
  
    
   if(IsTesting())return;
 
      
    if (AccountBalance() < 111 ){
      Alert("Erorr Balance");
      return; 
      
    if (AccountNumber() != 11111){
      Alert("Error AccountNumber");
      return;}
      
   }

Voglio fare il primo controllo dell'equilibrio sull'importo, se meno di 111 allora avviso e ritorno, se più allora controllo sul numero di conto, se il conto è corretto allora commercio se non allora avviso e ritorno...

Ma per qualche ragione viene fatto solo individualmente se rimuovo AccountBalance o AccountNumber...

Probabilmente una domanda nouveau, ma cosa mi sono perso?

grazie

Errori, bug, domande Controllare - cosa ho Il mio EA fa

Victor Nikolaev 2011.09.22 16:10 #2037

volodin_andrei:

Salve.

Sono un principiante in questo settore. Quindi chiedo il vostro aiuto.

Ecco un pezzo di codice:

Voglio fare il primo controllo dell'equilibrio sull'importo, se meno di 111 allora avviso e ritorno, se più allora controllo sul numero di conto, se il conto è corretto allora commercio se non allora avviso e ritorno...

Ma per qualche ragione viene fatto solo individualmente se rimuovoAccountBalance o AccountNumber...

Probabilmente una domanda nouveau, ma cosa mi sono perso?

grazie

Avete provato con le staffe (staffe sagomate)?

int start()
  {
  
    
   if(IsTesting())return;
 
      
   if (AccountBalance() < 111 )
   {
       Alert("Erorr Balance");
       return(0); 
   }  
   if (AccountNumber() != 11111)
   {
       Alert("Error AccountNumber");
       return(0);
   }
   return(0);
}

C'erano abbastanza parentesi, ma nei posti sbagliati

[Eliminato] 2011.09.22 16:38 #2038

L'ho modificato con il tuo aiuto, ma non riesce a compilare, quindi ecco uno screenshot, deve essere una parentesi extra o .... :(

DDFedor 2011.09.22 16:42 #2039

Trova un editor di testo che abbia una funzione di tracciamento delle parentesi.

Всеволод 2011.09.22 16:47 #2040

Vinin:

E se ci fossero anche posizioni aperte in altri strumenti, o altri EA? Pensate a quello che state scrivendo.

Sfortunatamente, la descrizione della condizione non pretende di essere completa e non rivela completamente il concetto di "40° ordine". Allora sarebbe molto più semplice mantenere il numero di ordini aperti nell'EA in una variabile, piuttosto che usare le funzioni standard. Gli ordini pendenti sono una questione separata in questa situazione.

Qualsiasi domanda da principiante, Tutte le domande dei [Qualsiasi domanda da principiante,

[ARCHIVIO] Qualsiasi domanda da principiante, per non ingombrare il forum. Professionisti, non passate oltre. Da nessuna parte senza di te - 3. - pagina 204