Escribí un código que cuando cualquier orden cierra todas las demás órdenes pendientes, pero el problema es que escribí 4 órdenes 2, 3, 4, 5. Por lo tanto, cuando se abran las siguientes órdenes pendientes 6, 7, 8, etc., no deben cerrarse. Los números de las órdenes resaltadas en rojo deben ser cambiados por las órdenes que se cerrarán todas las órdenes pendientes.
Escribí un código que cuando cualquier orden cierra todas las demás órdenes pendientes, pero el problema es que escribí 4 órdenes 2, 3, 4, 5. Por lo tanto, cuando se abran las siguientes órdenes pendientes 6, 7, 8, etc., no deben cerrarse. Los números de orden resaltados en rojo deben ser cambiados por los que se cerrarán todas las órdenes pendientes.
En primer lugar, comprobamos en el bucle si la posición se ha cerrado recientemente o no, para lo que necesitaremos OrdersHistoryTotal. Donde comprobamos la hora de cierre de la posición OrderCloseTime, si es mayor que la última en la variable, entonces hacemos un bucle a través de todos los OrdersTotal abiertos. Y cerrarlos.
P.D. Inserte el código usando Alt+S o el botón
Por ejemplo, este
// retrieving info from trade historyint i,accTotal=OrdersHistoryTotal();
for(i=0;i<accTotal;i++)
{
//---- check selection resultif(!OrderSelect(i,SELECT_BY_POS,MODE_HISTORY))
{
Print("Ошибка при доступе к исторической базе (",GetLastError(),")");
break;
}
// работа с ордером ...
}
externstring TimeStart = "04:00"; //Время начала контрольного периодаexternstring TimeEnd = "09:00"; //Время окончания контрольного периодаexternstring TimeCloseOrder = "23:30";//Время в которое происходит закрытие всех ордеровexterndouble LOT = 0.1;
externint Magic = 777;
externdouble K_martin = 2;
externbool No_Loss = true;
int slippage = 3;
double marga,Lot,SL,TP;
int tip,Orders,tipOrders,TradeDey;
//-------------------------------------------------------------------+int init()
{
if (Digits==5 || Digits==3) slippage = 30;
}
int start()
{
datetime Time_Start = StrToTime(StringConcatenate(Day(),".",Month(),".",Year()," ",TimeStart, ":00"));
datetime Time_End = StrToTime(StringConcatenate(Day(),".",Month(),".",Year()," ",TimeEnd, ":00"));
datetime Time_CloseOrder = StrToTime(StringConcatenate(Day(),".",Month(),".",Year()," ",TimeCloseOrder,":00"));
if (Time_CloseOrder>Time_End) if (CurTime()>=Time_CloseOrder) CLOSEORDERS();
int tip;
if (Orders>OrdersTotal()) tip=CloseOrder();
Orders=OrdersTotal();
if (ORDERS(0)==0 && tip==0 && (CurTime()<Time_CloseOrder || Time_CloseOrder<=Time_End) && TradeDey!=TimeDay(CurTime()))
{
int BarStart = iBarShift(NULL,0,Time_Start,false);
int BarEnd = iBarShift(NULL,0,Time_End ,false);
double Max_Price=iHigh(NULL,0,iHighest(NULL,0,MODE_HIGH,BarStart-BarEnd,BarEnd));
double Min_Price=iLow (NULL,0,iLowest (NULL,0,MODE_LOW, BarStart-BarEnd,BarEnd));
if (TimeCurrent()>Time_End && ObjectFind("bar0"+Time_End)==-1)
{
ObjectCreate("bar0"+Time_End, OBJ_RECTANGLE, 0, 0,0, 0,0);
ObjectSet ("bar0"+Time_End, OBJPROP_STYLE, STYLE_SOLID);
ObjectSet ("bar0"+Time_End, OBJPROP_COLOR, Blue);
ObjectSet ("bar0"+Time_End, OBJPROP_BACK, true);
ObjectSet ("bar0"+Time_End, OBJPROP_TIME1 ,Time_Start);
ObjectSet ("bar0"+Time_End, OBJPROP_PRICE1,Max_Price);
ObjectSet ("bar0"+Time_End, OBJPROP_TIME2 ,Time_End);
ObjectSet ("bar0"+Time_End, OBJPROP_PRICE2,Min_Price);
}
if (Bid>Max_Price) OrderSend(Symbol(),OP_BUY,LOT,Bid,slippage,Min_Price,
NormalizeDouble(Ask + Max_Price-Min_Price,Digits),"BreakdownLevel",Magic,Blue);
if (Bid<Min_Price) OrderSend(Symbol(),OP_SELL,LOT,Bid,slippage,Max_Price,
NormalizeDouble(Bid - Max_Price+Min_Price,Digits),"BreakdownLevel",Magic,Blue);
return;
}
if (No_Loss) No_Loss();
if (tip==1 && TradeDey!=TimeDay(CurTime()))
{
Lot=Lot*K_martin;
if (tipOrders==0) OrderSend(Symbol(),OP_SELL,Lot,Bid,slippage,SL,TP,"Nevalyashka",Magic,Blue);
if (tipOrders==1) OrderSend(Symbol(),OP_BUY ,Lot,Ask,slippage,SL,TP,"Nevalyashka",Magic,Blue);
}
return(0);
}
//-------------------------------------------------------------------+int CloseOrder()
{
string txt;
double loss;
int i=OrdersHistoryTotal()-1;
if(OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==true)
{
if (OrderSymbol()==Symbol() && Magic==OrderMagicNumber())
{
tipOrders=OrderType();
Lot=OrderLots();
loss = MathAbs(OrderProfit()/MarketInfo(Symbol(),MODE_TICKVALUE)/Lot/K_martin);
if (tipOrders==0)
{
TP=NormalizeDouble(Bid - loss*Point,Digits);
SL=NormalizeDouble(Ask + loss*Point,Digits);
}
if (tipOrders==1)
{
SL=NormalizeDouble(Bid - loss*Point,Digits);
TP=NormalizeDouble(Ask + loss*Point,Digits);
}
if (OrderClosePrice()==OrderTakeProfit() || OrderProfit()>=0) TradeDey=TimeDay(CurTime());
if (OrderClosePrice()==OrderStopLoss()) return(1);
}
}
return(0);
}
//+-----------------------------------------------------------------+int ORDERS(int tip)
{
int N_Sell,N_Buy;
for (int i=0; i<OrdersTotal(); i++)
{
if (OrderSelect(i,SELECT_BY_POS,MODE_TRADES)==true)
{
if (OrderSymbol()==Symbol() && Magic==OrderMagicNumber())
{
if (OrderType()==OP_BUY ) N_Buy++;
if (OrderType()==OP_SELL) N_Sell++;
}
}
}
if (tip== 0) return(N_Buy+N_Sell);
if (tip== 1) return(N_Buy);
if (tip==-1) return(N_Sell);
}
//-------------------------------------------------------------------+void No_Loss()
{
int tip;
double TP,OOP;
for (int i=OrdersTotal()-1; i>=0; i--)
{
if (OrderSelect(i, SELECT_BY_POS)==true)
{
tip = OrderType();
if (tip<2 && OrderSymbol()==Symbol())
{
if (OrderMagicNumber()!=Magic) continue;
TP = OrderTakeProfit();
OOP = OrderOpenPrice();
if (tip==0) //Bay
{
if (OrderStopLoss()>OrderOpenPrice()+Ask-Bid) return;
if ((TP-OOP)/2+OOP<=Bid)
OrderModify(OrderTicket(),OOP,NormalizeDouble(OOP+Ask-Bid,Digits),TP,0,White);
}
if (tip==1) //Sell
{
if (OrderStopLoss()<OrderOpenPrice()-Ask+Bid) return;
if (OOP-(OOP-TP)/2>=Ask)
OrderModify(OrderTicket(),OOP,NormalizeDouble(OOP-Ask+Bid,Digits),TP,0,White);
}
}
}
}
}
//------------------------------------------------------------------+void CLOSEORDERS()
{
bool error;
int err;
while (true)
{ error=true;
for (int i=OrdersTotal()-1; i>=0; i--)
{
if (OrderSelect(i,SELECT_BY_POS,MODE_TRADES)==true)
{
if (OrderSymbol()!=Symbol()||Magic!=OrderMagicNumber()) continue;
if (OrderType()==OP_BUY)
error=OrderClose(OrderTicket(),OrderLots(),Bid,3,CLR_NONE);
if (OrderType()==OP_SELL)
error=OrderClose(OrderTicket(),OrderLots(),Ask,3,CLR_NONE);
}
}
if (!error) {err++;Sleep(2000);RefreshRates();}
if (error || err >5) return;
}
}
//-------------------------------------------------------------------+
Aquí hay una pregunta, algún problema con los takeprofits y stoplosses, por alguna razón los TP y SL están cambiando, en órdenes abiertas con lote aumentado, en sí . Y aumenta los lotes, pero el cierre por TP no permite devolver el importe de las pérdidas. ¿Por qué ocurre, qué pasa?
Hola, yo no he escrito la función. El robot escribe un error en la posición inicial 0 de la función ArraySort. Les agradecería que ayudaran a solucionarlo y explicaran la función
void MaxMinProfit()
{
int i, N, MaxTic, MinTic;
double MinProf=0, MaxProf=0, OP, g, a[][2];
string MinSym, MaxSym;
ArrayResize(a, 0);
for (i=OrdersTotal()-1; i>=0; i--)
{
if (OrderSelect(i,SELECT_BY_POS,MODE_TRADES))
{
if (OrderType()==OP_SELL || OrderType()==OP_BUY )
{
OP = NormalizeDouble(OrderProfit()+OrderSwap()+OrderCommission(),2);
if (MinProf>OP)
{
MinProf=OP;
MinTic=OrderTicket();
MinSym=OrderSymbol();
}
if (OP>0)
{
N++;
ArrayResize(a, N);
a[N-1][0]=OP;
a[N-1][1]=OrderTicket();
}
}
}
}
ArraySort(a, WHOLE_ARRAY, 0, MODE_DESCEND);//MODE_ASCEND);for (i=0; i<Level; i++)
{
g+=a[i][0];
//int ti=a[i-2][1];
}
if(MinProf <0 && (g+MinProf)>=ProcMax)
{
for (i=0; i<Level; i++)
{
if (OrderSelect(a[i][1], SELECT_BY_TICKET, MODE_TRADES))
{
//Alert(a[i][1]);if (OrderType()== OP_BUY)
{
OrderClose(OrderTicket(), OrderLots(), MarketInfo(OrderSymbol(),MODE_BID), Slip, CLR_NONE);
}
if (OrderType()== OP_SELL)
{
OrderClose(OrderTicket(), OrderLots(), MarketInfo(OrderSymbol(),MODE_ASK), Slip, CLR_NONE);
}
}
}
if (OrderSelect(MinTic, SELECT_BY_TICKET, MODE_TRADES))
{
if (OrderType()== OP_BUY)
{
OrderClose(MinTic, OrderLots(), MarketInfo(OrderSymbol(),MODE_BID), Slip, CLR_NONE);
}
if (OrderType()== OP_SELL)
{
OrderClose(MinTic, OrderLots(), MarketInfo(OrderSymbol(),MODE_ASK), Slip, CLR_NONE);
}
}}
return;
}
Para iniciar sesión y usar el sitio web MQL5.com es necesario permitir el uso de Сookies.
Por favor, active este ajuste en su navegador, de lo contrario, no podrá iniciar sesión.
Ha iniciado sesión. La autenticación de dos factores se ha desactivado. Vuelva a configurarla y escanee un nuevo código QR, o continúe con la autenticación de dos factores desactivada.
Escribí un código que cuando cualquier orden cierra todas las demás órdenes pendientes, pero el problema es que escribí 4 órdenes 2, 3, 4, 5. Por lo tanto, cuando se abran las siguientes órdenes pendientes 6, 7, 8, etc., no deben cerrarse. Los números de las órdenes resaltadas en rojo deben ser cambiados por las órdenes que se cerrarán todas las órdenes pendientes.
void start(){
//----
doble Toma1 = Pregunta+20 *Punto;
doble Toma2 = Pregunta+0 *Punto;
double Take3 = Ask-20 *Point;
double Take4 = Ask-40 *Point;
double Take5 = Ask-60 *Point;
double Stop = Bid-StopLoss *Punto;
if(PedidosTotal()==0){
OrderSend(Symbol(),0,0.01,Ask,30,Stop,Take1,",0,0,CLR_NONE);
OrderSend(Symbol(),2,0.02,Ask-20*Point,30,Stop,Take2,"",0,0,CLR_NONE);
OrderSend(Symbol(),2,0.04,Ask-40*Point,30,Stop,Take3,",0,0,CLR_NONE);
OrderSend(Symbol(),2,0.08,Ask-60*Point,30,Stop,Take4,",0,0,CLR_NONE);
OrderSend(Symbol(),2,0.16,Ask-80*Point,30,Stop,Take5,"",0,0,CLR_NONE);
}
if(OrdersTotal()==4)
{
OrderDelete(2);
}
if(OrdersTotal()==3)
{
OrderDelete(3);
}
if(OrdersTotal()==2)
{
OrderDelete(4);
}
if(PedidosTotal()==1)
{
OrderDelete(5);
return(0);
}
Escribí un código que cuando cualquier orden cierra todas las demás órdenes pendientes, pero el problema es que escribí 4 órdenes 2, 3, 4, 5. Por lo tanto, cuando se abran las siguientes órdenes pendientes 6, 7, 8, etc., no deben cerrarse. Los números de orden resaltados en rojo deben ser cambiados por los que se cerrarán todas las órdenes pendientes.
En primer lugar, comprobamos en el bucle si la posición se ha cerrado recientemente o no, para lo que necesitaremos OrdersHistoryTotal. Donde comprobamos la hora de cierre de la posición OrderCloseTime, si es mayor que la última en la variable, entonces hacemos un bucle a través de todos los OrdersTotal abiertos. Y cerrarlos.
P.D. Inserte el código usando Alt+S o el botón

Por ejemplo, este
aquí está la condición if(OrdersTotal()==0). pero ¿qué debemos escribir la condición si hay cero bahías?
Si (OP_BUY==0)
Si (OP_BUY==0)