Exp4 THE X FULL Universal EA for MT4
Universal constructor Expert Advisor for MetaTrader 4 with a large set of functions working on standard indicator signals. UniversalEA
- A lot of trading indicators from the standard MetaTrader set.
- Ability to select 1 of 20 signals and 5 filters.
- More than a hundred parameters for customization for your requirements.
- At each signal, you can adjust the parameters of the indicator, select a timeframe, specify a signal bar.
You can also download The X EA for MetaTrader 5 (The X for MT5)
The EA contains the following functions:
- counter-trend averaging,
- additional opening in the direction of a trend,
- trailing stop,
- closing by total profit or loss,
- virtual stoploss, takeprofits, and trailing stops,
- ability to use positions or pending/limit orders,
- trailing stop by Parabolic,
- drawdown limitation functions,
- trading by time and weekdays
- and many others.
The complete manual and description of the EA settings can be found in our blog or PDF GUIDE
Attention! This is a strategy constructor with a set of custom features. You should optimize the EA based on signals and enabled functions.
Available signals and filters
Note: The list of signals and indicators is updated continuously.
- AO - Awesome Oscillator
- ADX Wilder
OTHER FUNCTIONS AND SETTINGS
- Adding position to a following the trend;
- Operation time;
- MAIN TRADING FUNCTIONS;
- TRAILING STOP;
- TRAILING STOP by PARABOLIC SAR;
- CLOSE BY TOTAL PROFIT AND LOSS;
- CURRENCY PAIR SETTINGS;
- INDICATOR SETTINGS;
- PROFITorLOSS LIMIT SETTINGS;
- DRAWDOWN LIMITATION SETTINGS;
Attention! This is a universal trading strategy builder! You must optimize it for your requirements!
--Fixed the main signal reversal error when using the Signal_Reverse (true) and ClosePositionifChangeOWNSignal (OnyProfit) functions.
AdditionalLots - An additional lot that will be added to each new deal based on a new signal
CoeficienteLots - Lot coefficient, by which the lot will be multiplied for each new deal on a new signal
(When the advisor is allowed to open more than one position for each signal ONlyOnePosbySignal = false / OnePosPerDirection = false)
If the comment is longer than 12 characters, then the advisor will trim the extra characters.
Attention! For the EA to work correctly, set a comment no longer than 12 characters.
Not Right: Expforex The X Set # 12345
(Например закрытие в 22:49 а ТФ = H1 )
-- UPDATE: Bar - trade in the direction of the bar
New Parametr Min_Points_of_Bar_OpenClose = 100
If candle Close is above of 100 points the candle Open (Bullish candlestick) - BUY
If candle Close is below of 100 points the candle Open (Bearish candlestick) - SELL
if Min_Points_of_Bar_OpenClose 0 same old version
- if true, the Advisor starts the modification only when the position is gaining profit to Breakeven (setting stop loss on the break-even point) + TrailingStop profit points.
- if false - TrailingStop starts working immediately after opening a position and making a profit of 0 points and leaving a position as a profit.
In other words: IfProfTrail = false, then the trailing stop starts working immediately after the position is in profit.
Due to the fact that the hosting location folder has changed and MetaQuotes added a new variable TERMINAL_VPS, new edits were applied to all experts.!
ControlNewBarforSIGNALType = 1 = True smallest TF of the settings: New mode!
The EA selects the smallest TimeFrame, which was set by the parameters TF_IndSigToTrade1, FILTER_TF_IndSigToTrade1, FILTER_TF_IndSigToTrade2 ....
In this mode, the EA does not check the signal on the currently set TimeFrame, but on the TimeFrame for receiving a signal from indicators!
This mode is useful for those who use TF_IndSigToTrade1, FILTER_TF_IndSigToTrade1, FILTER_TF_IndSigToTrade2, other than Current.
ControlNewBarforSIGNALType = 2 = True current bar of the current TF: Old mode!
In this mode, the EA checks signals every new bar of the current TimeFrame!
If you use TF_IndSigToTrade1, FILTER_TF_IndSigToTrade1, FILTER_TF_IndSigToTrade2 other than Current, the results on each TimeFrame may be
We advise you to install the adviser on the TimeFrame M1!
ControlNewBarforSIGNALType = 1 = False: Do not use the control of the new bar to determine the signal!
Attention: When off, the EA checks signals every new tick! There may be delays in tapping and optimization!
2. Added variable ControlNewBarforOpenbySignal:
ControlNewBarforOpenbySignal = true: Old mode! Open positions on a signal only every new current bar of the current TimeFrame!
The EA opens positions, if there is a signal, only when a new bar of the current TimeFrame arrives!
ControlNewBarforOpenbySignal = false: New mode! Open positions on a signal every new bar from the signal Timeframe!
The EA opens positions, if there is a signal, immediately upon detection of a signal.
This mode is useful for those who use TF_IndSigToTrade1, FILTER_TF_IndSigToTrade1, FILTER_TF_IndSigToTrade2, other than Current.
Starting the calculation of the average spread only when the user uses at least one parameter for the average spread.
Added DistanceMartinAdditional - Coefficient of distance for additional order opening.
Added MinTimebeforenextAverage - Minimum time to the next averaging in minutes.
- EAPADPRO v25 update
- Additional languages added to the panel: Spanish, Portuguese (Brazil), German, Chinese, Japanese;
The translation was made using the GOOGLE Translator + MQL + Terminal site!
If you find an error in your language, please report it in messages. Thank!
- Increase the speed of the panel;
- Added a control unit and control the speed of the quotes and the speed of testing.
- Added block output table open deals and positions.
Added new variables:
- LotAdditional - additional lot for averaging a position for opening against the trend.
- LotAdditionalOpening - additional lot for an additional position for an additional opening by trend.
Update panel EAPAPDPRO v21:
-Add information about the ban on trade for various reasons
Now you can set the maximum number of positions by magic number on the entire account.
For example, OnlyOnePositionPerMagic = 5 - means that a maximum of 5 positions can be opened on the account by the magic number.
When you turn off signals and filters, the Expert Advisor only accompanies the open positions and does not open new positions.
Added option SeparateBuySell - Separate calculation and closing of positions in two different directions BUY and SELL.
This function separately closes two directions for total profit or loss.
Actual, If ONlyOnePosbySignal = false and OnePosPerDirection = false.
Or any settings that allow you to open more than one direction and more than one position in the direction.
The function of automatic determination of parameters by the average spread has been added.
The algorithm for the function is taken from our automated tickSniper scalper sales advisor.
Added parameters to the Stops options block:
- TimeToCheckAverageSpread The number (milliseconds, 20,000 = 20 seconds) for determining the average spread
- AutoCheckLowSpread Auto-determination of the low spread.
Automatically determines the spread too low (Less than 1 point) and leads all system settings to the lowest possible spread.
Allows you to protect the system from reducing the spread on the broker.
How to use:
In order for the parameter calculated in points to be calculated from the average spread of the currency pair, you need to specify the parameter with sign -
StopLoss = 2000 means that StopLoss of each position will be 2000 points!
StopLoss = -100 means that StopLoss of each position will be equal to 100 * Average spread, which was calculated by the advisor for TimeToCheckAverageSpread milliseconds.
If the spread is 20 points, then stop loss at the time of opening will be 2000 points.
With a floating spread, this value always changes.
The parameters available for setting in the spread mode: Distance, DistanceAdditionalOpening, StopOrderDeltaifUSE, StopLoss, TakeProfit, TrailingStop, TakeProfitALL, StopLossALL, LevelWLoss, LevelProfit.
The average and current spread, as well as the level of the Auto Spread Low spread will be displayed in our panel in the section Strategy Info
In the Limiting losses and profits block, a new type NOTIME was added to the LimitFor parameter , when using this type, the adviser checks the limits during the time from the last close!
Attention: works only when using ClosebyLIMITING = true!
This type allows you to take into account closed positions and current positions since the last closing of the total limit. It does not count for a day, a week, but for the period between the last closing according to the terms of this block and the current time. When closing by Limits, the counter sets the current time.
Block Limiting losses and profits updated:
Parameters LimitForLosses and LimitForProfits changed by type to double
A new CUSTOM mode has been added to the LimitType type. You can specify your monitoring values ??in minutes, the LimitForCustom_Minutes parameter.
Only_Current_Symbol_Magic - Counts the drawdown by the current symbol and the current magic number;
Only_Current_Symbol_ALLMagic - Counts the drawdown by the current symbol and any magic number;
All_Account - Allows for drawdown of the entire account.
In the indicator Mooving Average, the selection of the price type and the averaging method for the two MAs
Parameter TypeTradeBUYSELL was updated.
Now this parameter participates in functions, including: "Closing on the total profit and loss", averaging, additional opening, trailing stop,break-even.
The filter parameters are added to the averaging and additional trend opening blocks.
The Expert Advisor checks the indications of the selected indicator (Filter) and allows or forbids the opening of new positions of a averaging or additional opening on a trend.
The following options are available: Selection of the indicator for the filter, Timeframe, Reverse signals
- Added the data to the information panel:
When using the "CloseALL when Profit or LOSS options" block, the panel will display the data on the current profit and loss, as well as the values of the total trailing, if enabled.
- When opening a position, the information on the signal is output to the log!
Attention!!!! The parameters have been renamed!
Update and check your *.set files
These are forced measures:
1. to make the setting files uniform for the two terminals.
2. to make the instruction the same for the two versions.
Sorry for inconvenience!
- МТ5 version:
- МТ4 version:
- When using OpenBarControlOnly, the virtual stop loss and take profit will be executed on each tick.
- Added the check of conditions for setting stop loss and tale profit to the function:
Stop loss for BUY orders can be placed only below the current price.
Take profit for BUY orders can be placed only above the current price.
Stop loss for SELL orders can be placed only above the current price.
Take profit for SELL orders can be placed only below the current price.
The CloseAllTradesByOutOfTime function:
Division into type of closing by expiration of trading time:
- Not Use = do not use the function
- Positions and Orders = close positions and pending orders
- Only Positions = close only positions
- Only Orders = close only pending orders
Added new signals:
20: Trading based on Money Flow Index
Money Flow Index (MFI) indicates the rate at which money is invested into a security and then withdrawn from it. Construction and interpretation of the indicator is similar to Relative Strength Index with the only difference that volume is important to MFI.
The indicator signals are similar to signals from the RSI indicator;
21: Trading based on Fractals
Signal for opening positions is generated when the level of the last fractal is crossed:
When the price crosses the last upper fractal upwards, a BUY position is opened;
When the price crosses the last lower fractal downwards, a SELL position is opened;
Filter: similar to the main signal:
If the price is higher than the last upper fractal, only BUY positions;
If the price is lower than the last lower fractal, only SELL positions;
Attention! A fractal can be drawn at least on the 2 closed bar and can be drawn in the past in an unlimited number of bars back. Consider this when analyzing the signal!
Use the original calculation of commission and swap when enabling the functions: Breakeven, Trailing Stop, Averaging.
The original commission calculation is based on the formula for calculating the value of 1 point from the open positions on a given symbol and magic number. Negative swap and commission are taken into account during calculations. The function returns the value of the negative swap and commission in points, and considers this when working with breakeven and trailing stop.
Note: if your broker has a floating spread, commission is calculated and set during the operation of the breakeven and trailing stop functions, but the spread may increase, leading to additional loss points. This is not a calculation error!
Also, note that when a swap occurs, the EA recalculates the breakeven line and sets new stop loss levels is the server allows it (restriction on the minimum Stop Level of your broker). If the server does not allow setting breakeven and returns the minimum stop level error, the EA will be unable to modify the position and additional loss points may be received.
In order to avoid losses when using accounts with commission and when receiving a negative swap, it is recommended to increase the distance of the breakeven or trailing stop.
The breakeven level (LevelWLoss) can be calculated manually, taking the commission into account.
For example: commission for opening and closing position = 2 USD (EURUSD) per 1 lot. So, in order to cover the loss on the commission, it is necessary to set LevelWLoss = 2 (points) + 1 (confirming) = 3 points.
Thus, the EA sets breakeven to +3 points, which in turn will cover the loss on the commission.
- Added a special mode to the breakeven function through the LevelWLoss parameter
When LevelWLoss = 0, the breakeven point is calculated based on the current spread. This allows making the breakeven level dynamic and closing with the minimum profit of 1 spread. If the position's profit increases, trailing stop comes into play.
(This mode worked in previous versions of the expert)
If LevelWLoss = 1, the EA will set breakeven to 1 point!
Added the ability to set stop loss and take profit for positions opened from the EAPADPRO control panel
- Optimized the EA code;
- Increased the EA operation speed;
- Updated the averaging;
- Updated the commission calculation algorithm;
- ControlNewBarforSIGNAL: check for indicator signals at each new bar only (without checking on each tick), the parameter works only if OWNSIGNAL_shift>=1 and IndSigToTrade!=NoSignal (if NoSignal, the EA checks the filter values at each tick)
If ControlNewBarforSIGNAL=true, the optimization speed is increased 1.5 times.
- Added the ClosePosition_After_X_Minutes parameter: close position after a specified amount of minutes.
The EA also checks the enabled CloseChangeOnlyInProfit parameter: close only profitable positions.
- Added the OnTester_Custom_max variable to the Tester block allowing you to write your own genetic optimization criterion.
More on test results: https://www.mql5.com/en/docs/constants/environment_state/statistics
The entry is made as an equation. For example: OnTester_Custom_max="STAT_PROFIT*STAT_TRADES/STAT_EQUITY_DD"
The variable names should match the ones in the documentation!
- Added two types of virtual pending orders to order type selection (Positions, StopOrders, LimitOrders):
Use Virtual Stop Orders: set a virtual pending stop order at a distance of StopOrderDeltaifUSE points;
Use Virtual Limit Orders: set a virtual pending limit order at a distance of StopOrderDeltaifUSE points;
Note: It works only in Visualization mode or real chart only when the terminal is enabled.
It does not work in optimization mode!
Added the new parameter ReInstallStopOrdersNewSignalAppears - re-set pending orders if a new indicator signal arrives. This allows removing the current BUYSTOP pending order and place a new BUYSTOP on a new level after indicators have informed of a new signal.
Added No Signal to the main signal. If selected, the EA ignores the main signal and trades by filters.
When using the main indicator, the signal is generated 'as is' on the current bar.
This means the open signal is regarded a signal completion. If a signal arrives, while the filter does not allow opening a position, the signal is ignored.
When using No Signal, you can ignore the fact of the main signal completion and follow the filters.
When using the filters, the current position of indicators is regarded as a signal.
Added the OnlyAlternateSignals parameter.
It allows opening positions one by one only.
If the last closed position is SELL, the next one can be only BUY!
It is needed to let the main indicator trade in No Signal mode.
Updated ADX filter.
ADX shows the trend strength.
If ADXLevel is 0, DI- > DI+ is used as a permission to sell
If ADXLevel is 0, DI+ > DI- is used as a permission to buy
If ADXLevel is not 0, DI- > DI+ и DI- > ADXLevel is used as a permission to sell
If ADXLevel is not 0, DI+ > DI- и DI+ > ADXLevel is used as a permission to buy
Added new ATR filter.
ATR shows the market volatility.
Trading strategies applying ATR as a filter confirm the current trend.
When ATR grows, this means high market volatility.
Low ATR values means low market volatility.
ATR_period=14 - ATR calculation period
ATRprice=PRICE_CLOSE - price type used to calculate the filter (Close, Open, High, Low...)
ATR_MA_period=1 - number of candles for calculating the Middle line (MA), 1 - the indicator calculates the signal direction from the current and previous bar (depending on the 'shift' parameters)
ATR_MULTIPLIER=1 - ATR ratio, for example EURUSD ATR=0.0020, when using ATR_MULTIPLIER=2. ATR=0.0040 is included into the calculation.
Filter ATR logic:
The price(ATRprice) of the current bar exceeds the price(ATRprice) of the previous bar + (ATR*ATR_MULTIPLIER) = high volatility BUY filter
The price(ATRprice) of the current bar is lower than the price(ATRprice) of the previous bar - (ATR*ATR_MULTIPLIER) = high volatility SELL filter
Added the StopOrderDayToExpiration and StopOrderBarToExpiration parameters
StopOrderDayToExpiration= order expiration time in days.
0 - ORDER_TIME_GTC - the order will stay in the queue until it is manually canceled
1 - ORDER_TIME_DAY - the order will be valid only during the current trading day
2...X - ORDER_TIME_SPECIFIED - the order will be valid until the specified date
StopOrderBarToExpiration - pending order expiration time in bars.
If StopOrderBarToExpiration=10, and TF = М1, the pending order will be canceled 10 minutes after it is placed.
Attention: each broker has custom minimal parameter for expiration time.
Added the parameters of total stop loss and take profit to the averaging block.
The stop loss/take profit level is calculated based on the middle line.
TakeProfitALL - the total take profit distance when opening averaging trades.
This option is useful only when AverageUSE is activated.
StopLossALL - the total stop loss distance when opening averaging trades.
This option is useful only when AdditionalOpening is activated.
When opening additional trades or averaging trades, the algorithm for breakeven and trailing stop is activated based on the middle line. The entire series of positions in one direction is calculated from the average level.
VirtualStops - enable the virtual (hidden) levels of stop loss/take profit/trailing stop/breakeven
Completely revised the algorithm of virtual stop loss\take profit\trailing stop\breakeven.
Now all virtual stops are displayed on the chart and are the key level for closing positions.
Data are displayed in the form of lines and written in global variables.
Note: if the stop line is removed from the chart along with the global variables, the virtual closure for this line will not work.
Note: check if your experts and indicators delete lines from the chart and global variables!
Attention: virtual levels are triggered at the current price, after which the closure occurs.
During closing, there may be a few points of slippage!
Note for МТ4: in optimization mode, the virtual stop loss/take profit does not work.
Note: enabling VirtualStops significantly reduces the speed of testing.
When closing all positions, the EA closes the positions starting from the first opened one.
Added selection of the pending stop/limit order type in StopOrderUSE
OWNSIGNAL_shift - signal bar shift for the main signal.
FILTERSIGNAL1_shift - signal bar shift for the filter.
Added a parameter to disable opening positions instead of notifying the user of a new signal.
Show_alert_without_opening_positions - when enabled, the EA will not open a new position based on the signal, but will only notify the user that a new signal has appeared. In this case, all other functions will work in the normal mode.
Added the SaveTPafterTrailingStop option. When enabled, take profit of the modified positions will be saved in its place.
SaveTPafterTrailingStop = false: when trailing stop is active, take profit of the modified position is deleted.
SaveTPafterTrailingStop = true: when trailing stop is active, take profit of the modified position is saved.
Updated the Extra BUY and Extra SELL buttons. The stop loss/take profit specified in the EA settings is now also considered when opening positions.
Updated the MACD filter
When using the MACD filter, the location of the MACD lines relative to the MACD_BUYLEVEL and MACD_SELLLEVEL levels is now taken into account, similar to the signal.
Added ZIGZAG signals
Intersections of ZIGZAG extremums serve as position opening signals.
When using these signals, it is important to configure the shift parameter.
If set to 0, a position is immediately opened towards the intersection of the current Bid price and the latest ZIGZAG extremum.
If set to 1, a position is opened when the intersection is registered on 1 closed bar.
The last extremum is the fixed extremum 1, when a new ZIGZAG segment is plotted starting from that extremum. Intersection of the maximum and minimum point is a signal for opening a position.
The direction of the last ZIGZAG 0 segment is considered to be the ZIGZAG filter.
If OnePosPerDirection= false, then OnlyOnePositionPerMagic=true works like this: 1 position per magic number is allowed;
If OnePosPerDirection= true, then OnlyOnePositionPerMagic=true works like this: 1 position in each direction per magic number is allowed;
strategy of signals from the reference: https://www.metatrader5.com/en/terminal/help/indicators/trend_indicators/admi
this signal can take two types of signals for opening
if ADXLevel =0, then this strategy is used:
Wilder suggests buying when +DI crosses -DI upward and selling when +DI crosses -DI downward.
if ADXLevel !=0, then this strategy is used:
Wilder suggests buying when +DI crosses -DI upward with +DI above ADXLevel, and selling when +DI crosses -DI downward -DI above ADXLevel.
When using ADX as a filter, it uses the position of lines +DI>-DI = only BUY, +DI<-DI = only SELL, ADXLevel is not used.
The difference from ClosePosifChange is that when using ClosePosifChange, a change in the signal in considered for all filters + the main signal.
And when using ClosePositionifChangeOWNSignal - a change in the signal is considered only according to the main indicator.
- Fixed the error of the virtual trailing stop for SAR and averaging.
- Added support for the deposit currencies for the Autolot function, which are different from EUR USD RUB
- Added the RiskRate parameter - the exchange rate of your currency against the USD. The default RiskRate = 0 means that the EA will attempt to find the correct exchange rate in the "Market Watch". For the autolot to work adequately with all currency pair, it is necessary to "Show all" currency pairs in the "Market Watch".
- Added the drawdown management block - DrawDown options. This block prevents the EA from opening new deals by new signals from the algorithm, or closes all deals on the account and stops trading after a certain drawdown.
DrawDown_Level - enable the drawdown management block
Type_DrawDownHR - type of the drawdown calculation based on the deals in history and current deals
DrawDown_Level_One - the first drawdown level in percent
Type_Deal_Level_One - action when passing the first drawdown level (disable new signals \ disable averaging deals or additional opening \ disable all deals \ output a message)
DrawDown_Level_Two - the second drawdown level in percent
Type_Deal_Level_Two - action when passing the second drawdown level (close all profitable positions \ close all unprofitable positions \ close all \ output a message)
DrawDown_Level=true, DrawDown_Level_One=50,Type_Deal_Level_One=No_NewDeal, DrawDown_Level_Two=90, Type_Deal_Level_Two=Close_All. With these settings, once the current drawdown of deals in history and current deals exceeds the level of 50% of the current deposit, the EA is not allowed to open new deals by new signals. At the same time, the averaging functions will work. Once the drawdown exceeds 90%, the EA immediately closes all deals.
testerwd="========= Tester Withdrawal =========";
Withdrawal - enable virtual withdrawal in the Strategy Tester;
Withdrawal_mode - in deposit currency or percent of the current balance (currency/percentage);
Withdrawal_amount - amount of money to withdraw;
Withdrawal_periodicity_days - distance between withdrawals as a number of days;
Withdrawal_Max - maximum withdrawal amount;
Withdrawal_EndOfTest - money withdrawal after the end of testing;
Fixed errors based on user reports
Changed the line colors for the middle line and virtual stop loss/tale profit
Middle line - Blue
Take Profit - Green
Stop loss - Red
Trailing stop - Blue dotted
Middle line - Orange
Take Profit - Green
Stop loss - Red
Trailing stop - Orange dotted
Operation by time feature
Attention: Trading by time involves only filtering for opening new deals based on new signals.
All other functions: Trailing stop, Breakeven, Averaging, Scaling up along the trend and other works around the clock.
Attention: All parameters for trading by time can be optimized in the tester.
If TradeStartStopbyTime = false, the EA trades around the clock.
If TradeStartStopbyTime = true, the trading by time is activated:
The trading by time period starts on Monday.
The EA starts working on Monday at OpenHourMonday:OpenMinuteMonday if TradeStartbyTimeMonday=true
For example, OpenHourMonday=3 and OpenMinuteMonday=40, then the EA starts trading on Monday at 03:40 server time
(time of your broker, indicated in the Market Watch).
Next, the EA checks the trading time according to the parameters: OpenHour:OpenMinute - trading start and CloseHour:CloseMinute - trading end time for one day.
For example: OpenHour=5 and OpenMinute=0, as well as CloseHour=18 and CloseMinute=59, then the EA will trade every day from 5:00 to 18:59.
To set a trading period from the starting time, set the ClosePeriod_Minute parameter - period in minutes.
For example, OpenHour=6 and OpenMinute=0 and ClosePeriod_Minute=180, then the EA sets the trading time from 6:00 to 9:00(6+180 minutes = 9 hours).
You can also set multiple time intervals for trading in the SeveralTimeWork parameter. Entry format: HH:MM-HH:MM;
where: Hour to start trading:Minute to start trading - Hour to stop trading: Minute to stop trading.
For example, SeveralTimeWork=3:00-5:00;7:30-8:50;12:00-15:00;
then the EA will trade during 3 time intervals. from 3:00 to 5:00, from 7:30 to 8:50 and from 12:00 to 15:00. The EA will not open order during the remaining time.
You can also close all open deals and pending orders outside the trading time, CloseAllTradesByOutOfTime=true.
The EA will trade during the time specified above, and when the trading time ends, the EA will close all open positions and orders.
TradeStartStopbyTimeFriday - Trading time for Friday.
This EA allows the users to set the trading time for the EA on Friday.
Time parameters for Friday: OpenHourFriday:OpenMinuteFriday - CloseHourFriday:CloseMinuteFriday
For example, the EA should not open new deals on Friday after 18:00, set:
OpenHourFriday=0:OpenMinuteFriday=0 - CloseHourFriday=18:CloseMinuteFriday=0
In this case, the EA will not open new deals after 18:00
It is also possible to close all open deals and pending orders on Friday at the specified time - 18:00, CloseFriday=true.
The block for operation by time allows to set the trading days: TradeByDays
For example, TradeByDays=true Days=1,2,3 - in this case, the EA will trade only on Monday, Tuesday and Wednesday during the time specified above. Or it will trade around the clock those 3 days, if the time is not specified.
If you set Days=1,2,3,4,5 but with TradeStartStopbyTimeFriday=false, the EA will not trade on Friday.
It is also possible to set 1 day for optimization in the DayForOptimization parameter.
This option is useful to determine the most profitable days in optimization.
For example, DayForOptimization = 3, then the EA will trade only on Wednesdays.
You can set the trading to start on Monday and to stop on Friday, while the EA trades around the clock on the remaining days.
You can set the start on Monday and specific hours on other days.
OpenBarControlOnly - the EA operation on opened bars only. This mode allows to model the EA operation at the opening of bars (as in the strategy tester).
When this mode is enabled, the EA will trade just like in the OpenPriceOnly testing mode.
All! functions of the EA will be executed 1!! time at the opening of the bar (depending on the TF), including Modification, Trailing stop, Averaging, openng signals, etc.
Fixed working with long tickets
Added 3 additional filters
- Added the EAPADPRO information panel
Details on the panel in our blog:
The following data has been moved to the Strategy Info block:
OWN Signal = Name of the signal + Timeframe of the signal + Reverse
Current Signal = Current signal from the main indicator
Filter 1/2 - Name of the filter 1/2
Current Filter - Current signal from filters 1/2
BUY Average/Lot - Next averaging in points for BUY / Next averaging lot
SELL Average/Lot - Next averaging in points for SELL / Next averaging lot
Buy Additional/Lot - Next additional opening in points for BUY / Next lot for additional opening
Sell Additional/Lot - Next additional opening in points for SELL / Next lot for additional opening
Average Price Buy - Average price for BUY deals
Price Sell - Average price for SELL deals
-Fixed error with the DistanceMartin
Block of Parabolic SAR based trailing stop
-Added parameter TrailingStopSAR_TimeFrame - Timeframe of the SAR indicator for the trailing stop.
-To the МТ5 version: Added Parabolic SAR based trailing stop
TrailingStopSAR (true - false) step and maximum (parameters of the Parabolic SAR)
These parameters allow the modification of stop loss based on the specified Parabolic
The stop loss will be modified at every new value of the Parabolic SAR.
Accordingly, Buy is modified when the Parabolic SAR is below the price, Sell is modified when the Parabolic is above the price.
Block of signals
-Added parameter Signal_Reverse,Filter1_Reverse,Filter2_Reverse - they allow to inverse signals
based on specific indicators (Main signal, Filter 1 and Filter 2)
-Changed the MinuteToOpenNextPosition parameter (Allow opening the next signal after the last opened position),
if there are no open positions, the EA considers the time since the last closed position.
The time is considered for the same type. If the signal is BUY, the time is calculated from the last opened \ closed BUY....
-Changed the function for receiving signal when using signal inversion.
*If you use WPR as signal source, with the levels:
WPRLowLevel = -80;
Buy is opened, if WPR crosses WPRLowLevel (-80) upwards
SELL is opened, if WPR crosses WPRHighLevel (-20) downwards
*If you enable the option: Signal_Reverse=true
SELL is opened, if WPR crosses WPRLowLevel (-80) upwards
Buy is opened, if WPR crosses WPRHighLevel (-20) downwards
*If you enable the option: Signal_Reverse=true and set the parameters:
WPRLowLevel = -20;
Buy is opened, if WPR crosses WPRHighLevel (-80) downwards
SELL is opened, if WPR crosses WPRLowLevel (-20) upwards
- added parameters for the MACD signal
Which are involved in determining the signal.
for example: MACD_BUYLEVEL=3,MACD_SELLLEVEL=-3
For the long trade, the signal crosses the MACD line and at the end of that candle the MACD is greater than 0 and MACD is less than 3,0 (the signal line and MACD line must be both above the origin and less than 3.0).
For the short trade, the signal crosses the MACD line and at the end of that candle the MACD is less than 0 and MACD is greater than -3,0 (the signal line and MACD line must be both below the origin and greater than 3.0).
-Added automatic checking and normalization for all stops to tick size on the current currency pair.
For example, if the tick size on the WING17 symbol is 5 points, then all stop loss and take profit values will be normalized.
For example, the contract price is 58840 and the automatic stop loss calculation resulted in 1211 points, the final stop loss will be normalized to 1210 points.
Now trailing stop only triggers after a position covers the commission amount.
Added limit of losses over 1 day\week\month
Limiting LimitFor - limit type day\week\month
LimitForLosses - profit based limit
LimitForProfits- loss based limit
LimitType - limit type on dollars, points, percent of deposit
ClosebyLIMITING - close EA;s trades when exceeding the limit
UseCurrentProfit - when calculating the limit, take into account current loss/profit
This feature can disable the EA operation, if it reaches a certain profit\loss in the deposit currency during one day\month\week. The EA will resume working on the next day/week/month
Example: LimitFor=DAY LimitForProfits=1 Close at a total profit of $10
You can also set LimitType for calculations. In dollars, points, percentage of the account balance.
If you need to close and delete all trades of the Expert Advisor once the limit is exceeded, you can set ClosebyLIMITING = true
UseCurrentProfit enables/disables the inclusion of current floating profit/loss into limit calculation
AC - similar to the AO indicator
Ichimoku - crossover of TENKANSEN and KIJUNSEN lines,
If TENKANSEN is above KIJUNSEN - BUY
If TENKANSEN is below KIJUNSEN - SELL
Bar - trade in the direction of the bar
If candle Close is above the candle Open (Bullish candlestick) - BUY
If candle Close is below the candle Open (Bearish candlestick) - сигнал SELL
AC - operation similar to AO
Ichimoku - positions of TENKANSEN and KIJUNSEN lines,
Bar - bar direction
Bar relatively MA - signals are filtered using the bar close price and the fast/slow MA
If the bar close price is above MAfast and MAslow - only BUY
If the bar close price is below MAfast and MAslow - only SELL
Added information on the indicators values when opening deals
Added the MinuteToOpenNextPosition parameter - number of minutes for opening the next trade by the indicators' signals. The parameter counts the number of minutes passed from the last open position. Trades can be sorted if ONlyOnePosbySignal=false.
Added the OpenOppositePositionAfterStoploss parameter - open an opposite position when closing the current one by stop loss. An opposite position can be opened immediately after the previous position's stop loss activation without using the indicator signals.
Added the MAX_BUY_POSITION MAX_SELL_POSITION parameter - limit the maximum number of trades.
Added new functions to the 'Profit or Loss' block:
TrailOptions - The number of profit "units", after which profit trailing is activated;
TrailOptionsStep - Trailing step in "units";
BalanceStart - Starting balance of the calculation for 4 item of PercentBalance;
ForcedClose - force close all positions of this EA on the account by profit;
MailSend - Send push and mail notification when closing by profit or loss;
Orderdelete - Delete pending orders after closing by profit or loss;
CloseTerminalAfterClosePROF - Close the terminal after closing by profit;
CloseTerminalAfterCloseLOSS - Close the terminal after closing by loss;
Trailing Stop at Closing
A new function for trailing profits has been implemented on user demand. In this case, the profit is fixed with some correction. As soon as the profit reaches the specified value, the Expert Advisor saves the current profit level and starts trailing the profit. If you made settings for closing at the profit of 10 dollars:
CloseProfit - Close in profit.
prifitessss - The amount to close in profit.
TrailOptions - the distance from prifitessss, when reached the profit trailing is activated.
If prifitesss is set to 10 and TrailOptions is set to 5, the Trailing Stop will be set at 5 dollars. The Trailing Stop will come into play when the Expert Advisor passes the 10 dollar line and start moving following the profit. The Journal will show entries about the current profit status.
When the total profit falls below the last fixed level, TrailOptions, the Expert Advisor will perform forced closing of all positions.
Added the SetMinStops variable:
In case of AutoSetMinLevel, the stop levels are reduced to the minimum possible levels, allowed on the server;
In case of ManualSet, user receives a message that the stop levels in the EA are less than the minimum allowed ones, and the EA stops operation.
Before: When placing an averaging trade, the stop loss of the trades was reset to 0.
Now: An individual stop loss is set for each trade based on the StopLoss parameter
Added parameter of trading session duration from the initial time, ClosePeriod_Minute to the operation time block:
If you set
and ClosePeriod_Minute=60, then
Added parameter TypeTradeBUYSELL - trading direction:
Buy and Sell
At that: If trading is performed using pending orders and only in 1 direction: every time at new signal the old pending order will be deleted and moved to a new price.
Added parameter for selecting the timeframe for the signals:
Added parameter for optimization at a certain day of the week - DayForOptimization
If optimization is in progress, the EA trades only on the specified DayForOptimization day
If DayForOptimization!=0 the EA trades only on the specified DayForOptimization day
Added parameter for outputting the trade comment - CommentToOrder
Added parameters MaxSpreadToNotTrade and MinSpreadToNotTrade
MaxSpreadToNotTrade - maximum spread with which the EA will open a position
MinSpreadToNotTrade - minimum spread with which the EA will open a position
Attention: This filter is used only! for opening positions by signal, averaging, refilling. All other functions operate normally
Added parameter OnePosPerDirection: Opens 1 trade per 1 direction
If OnePosPerDirection=true and ONlyOnePosbySignal = false
then the EA can open 1 Buy trade by signal and 1 Sell trade by signal
if OnePosPerDirection=false and ONlyOnePosbySignal = true
then the EA can open only 1 trade by signal, either Buy or Sell
if OnePosPerDirection=false and ONlyOnePosbySignal = false
then the EA can open any trades by each signal of the indicators
Added parameter OnlyOnePositionPerMagic: Opens 1 parameter per 1 magic,
The EA checks of there are open positions with this magic on other currency pairs. If there is no such position, the EA opens a trade by signal, and the other experts will be waiting for this trade to be complete.
Before: The trade is opened only if both signals match at the same time
Now: If the IndSigToTrade signal appears, the FILTER_IndSigToTrade2 and FILTER_IndSigToTrade3 indicators are checked. If their signals go on, the trade is opened.
I.e. If the IndSigToTrade is selected as the main signal, then the FILTER_IndSigToTrade2 and FILTER_IndSigToTrade3 parameters only trigger as filters
Added the trailing stop by Parabolic to the averaging module.
If there are averaging deals opened and the Parabolic crosses the mean line, then the stop loss is placed at the level of the Parabolic
The TakeProfitAll parameter in the averaging module is replaced with general TakeProfit
The AverTrailingStop parameter in the averaging module is replaced with general TrailingStop
If you want to limit losses for the current EA, use this new block.
Example: you want to restrict trade opening after a loss of -100 USD for 1 day (week, month). Use the following parameters:
Once the loss for this magic and symbol reaches -100 USD for one day, new trades will not be opened on this EA. All other functions will keep working.
The next day this parameter is reset to 0.
Adjustable parameter LimitFor=DAY;WEEK;MONTH;ALLTIME;