If the house isn't six stories, there's too much mortar. Unless you have non-human builders and use up all the mortar. The joint should be 1-2 mm thick. The thicker the joint, the more heat will be lost.
If the house is not going to be 6 stories, that's too much mortar. Unless you are a non-human builder and use up all of it. Joint thickness should be 1-2 mm. The thicker the joint, the more heat will be lost.
Одним из главных преимуществ дома из YTONG являются его теплоизоляционные свойства. Высокотехнологичный строительный материал обеспечивает благоприятный климат внутри помещений, при этом значительно снижая эксплуатационные расходы по их содержанию. Зимой газобетон позволяет экономить на отоплении, а летом в помещениях сохраняется приятная...
How much effort have you put into these construction details? I remember wanting to build, but I started surfing around on websites and getting into it - there is a lot of information, and without understanding it there is anxiety that they will cheat and scam me for money.
Allow the use of cookies to log in to the MQL5.com website.
Please enable the necessary setting in your browser, otherwise you will not be able to log in.
You are signed in. Two-factor authentication has been disabled. Set it up again and scan a new QR code, or continue with two-factor authentication disabled.
Exited LKOH with a profit of RUB 3330.
But the best part will be tomorrow morning....
Added
Really interesting.
Despite the fact that yesterday, before closing, the futures prices skyrocketed,
the loss, in the end, was not a very large amount (-2737.76 rubles)
And the total profit = 7344 + 3330 - 2737.76 = 7936.24 rub.
Exited LKOH with a profit of RUB 3330.
But the best part will be tomorrow morning....
Added
Really interesting.
Despite the fact that yesterday, before closing, the futures prices skyrocketed,
the loss, in the end, was not a very large amount (-2737.76 rubles)
Total profit = 7344 + 3330 - 2737.76 = 7936.24 RUB.
How do you determine the volume of the position?
How do you determine the volume of the position?
In the previously posted EA, there is theCheckPosState() function
It determines the volume of a position
In the previously posted EA, there is theCheckPosState() function
it defines the position volume
I do not understand anything in the code, can you put it in words?
Nothing is clear to me from the code, can you write it in words?
Sorry, but I don't know how to explain without code...
Because the volume of the position is determined by the functions
written in the code.
PositionSelect()PositionGetDouble()How's the strategy working out?
No, I'm not doing it at the moment.
Standing at home
No, I'm not doing it at the moment.
Standing at home
If the house isn't six stories, there's too much mortar. Unless you have non-human builders and use up all the mortar. The joint should be 1-2 mm thick. The thicker the joint, the more heat will be lost.
If the house is not going to be 6 stories, that's too much mortar. Unless you are a non-human builder and use up all of it. Joint thickness should be 1-2 mm. The thicker the joint, the more heat will be lost.
Two storeys
Joint 0.5 - 1.0 mm (masonry on Tytan foam adhesive), this is not mortar, but YTONG blocks(https://www.ytong.ru/produkty-ytong.php):)
No, I'm not doing it at the moment.
The house is standing.
How much effort have you put into these construction details? I remember wanting to build, but I started surfing around on websites and getting into it - there is a lot of information, and without understanding it there is anxiety that they will cheat and scam me for money.