I'm a beginner in this business and I'm asking for your help - MQL4 and MetaTrader 4

Victor Nikolaev 2011.09.22 14:43 #2031

skyjet:
This is not a nested function, but part of the basic MACD Sample EA. I'm trying to add a calculated lot. Main and only start() function

You need to look at the whole code, then. What you have shown is the function

noobys 2011.09.22 14:48 #2032

There :) I just don't know how to fit in the lot calculation mentioned above.

//+------------------------------------------------------------------+
//|                                                  MACD Sample.mq4 |
//|                      Copyright © 2005, MetaQuotes Software Corp. |
//|                                       http://www.metaquotes.net/ |
//+------------------------------------------------------------------+

extern double TakeProfit = 50;
extern double Lots = 0.1;
extern double TrailingStop = 30;
extern double MACDOpenLevel=3;
extern double MACDCloseLevel=2;
extern double MATrendPeriod=26;

//+------------------------------------------------------------------+
//|                                                                  |
//+------------------------------------------------------------------+
int start()
  {
   double MacdCurrent, MacdPrevious, SignalCurrent;
   double SignalPrevious, MaCurrent, MaPrevious;
   int cnt, ticket, total;
// initial data checks
// it is important to make sure that the expert works with a normal
// chart and the user did not make any mistakes setting external 
// variables (Lots, StopLoss, TakeProfit, 
// TrailingStop) in our case, we check TakeProfit
// on a chart of less than 100 bars
   if(Bars<100)
     {
      Print("bars less than 100");
      return(0);  
     }
   if(TakeProfit<10)
     {
      Print("TakeProfit less than 10");
      return(0);  // check TakeProfit
     }
// to simplify the coding and speed up access
// data are put into internal variables
   MacdCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,0);
   MacdPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,1);
   SignalCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,0);
   SignalPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,1);
   MaCurrent=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,0);
   MaPrevious=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,1);

   total=OrdersTotal();
   if(total<1) 
     {
      // no opened orders identified
      if(AccountFreeMargin()<(1000*Lots))
        {
         Print("We have no money. Free Margin = ", AccountFreeMargin());
         return(0);  
        }
      // check for long position (BUY) possibility
      if(MacdCurrent<0 && MacdCurrent>SignalCurrent && MacdPrevious<SignalPrevious &&
         MathAbs(MacdCurrent)>(MACDOpenLevel*Point) && MaCurrent>MaPrevious)
        {
         ticket=OrderSend(Symbol(),OP_BUY,Lots,Ask,3,0,Ask+TakeProfit*Point,"macd sample",16384,0,Green);
         if(ticket>0)
           {
            if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("BUY order opened : ",OrderOpenPrice());
           }
         else Print("Error opening BUY order : ",GetLastError()); 
         return(0); 
        }
      // check for short position (SELL) possibility
      if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious && 
         MacdCurrent>(MACDOpenLevel*Point) && MaCurrent<MaPrevious)
        {
         ticket=OrderSend(Symbol(),OP_SELL,Lots,Bid,3,0,Bid-TakeProfit*Point,"macd sample",16384,0,Red);
         if(ticket>0)
           {
            if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("SELL order opened : ",OrderOpenPrice());
           }
         else Print("Error opening SELL order : ",GetLastError()); 
         return(0); 
        }
      return(0);
     }
   // it is important to enter the market correctly, 
   // but it is more important to exit it correctly...   
   for(cnt=0;cnt<total;cnt++)
     {
      OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
      if(OrderType()<=OP_SELL &&   // check for opened position 
         OrderSymbol()==Symbol())  // check for symbol
        {
         if(OrderType()==OP_BUY)   // long position is opened
           {
            // should it be closed?
            if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious &&
               MacdCurrent>(MACDCloseLevel*Point))
                {
                 OrderClose(OrderTicket(),OrderLots(),Bid,3,Violet); // close position
                 return(0); // exit
                }
            // check for trailing stop
            if(TrailingStop>0)  
              {                 
               if(Bid-OrderOpenPrice()>Point*TrailingStop)
                 {
                  if(OrderStopLoss()<Bid-Point*TrailingStop)
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Bid-Point*TrailingStop,OrderTakeProfit(),0,Green);
                     return(0);
                    }
                 }
              }
           }
         else // go to short position
           {
            // should it be closed?
            if(MacdCurrent<0 && MacdCurrent>SignalCurrent &&
               MacdPrevious<SignalPrevious && MathAbs(MacdCurrent)>(MACDCloseLevel*Point))
              {
               OrderClose(OrderTicket(),OrderLots(),Ask,3,Violet); // close position
               return(0); // exit
              }
            // check for trailing stop
            if(TrailingStop>0)  
              {                 
               if((OrderOpenPrice()-Ask)>(Point*TrailingStop))
                 {
                  if((OrderStopLoss()>(Ask+Point*TrailingStop)) || (OrderStopLoss()==0))
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Ask+Point*TrailingStop,OrderTakeProfit(),0,Red);
                     return(0);
                    }
                 }
              }
           }
        }
     }
   return(0);
  }
// the end.

Victor Nikolaev 2011.09.22 15:09 #2033

skyjet: There :) I just don't know how to fit in the lot calculation mentioned above.

//+------------------------------------------------------------------+
//|                                                  MACD Sample.mq4 |
//|                      Copyright © 2005, MetaQuotes Software Corp. |
//|                                       http://www.metaquotes.net/ |
//+------------------------------------------------------------------+

extern double TakeProfit = 50;
extern double Lots = 0.1;
extern double TrailingStop = 30;
extern double MACDOpenLevel=3;
extern double MACDCloseLevel=2;
extern double MATrendPeriod=26;

//+------------------------------------------------------------------+
//|                                                                  |
//+------------------------------------------------------------------+
int start()
  {
   double MacdCurrent, MacdPrevious, SignalCurrent;
   double SignalPrevious, MaCurrent, MaPrevious;
   int cnt, ticket, total;
// initial data checks
// it is important to make sure that the expert works with a normal
// chart and the user did not make any mistakes setting external 
// variables (Lots, StopLoss, TakeProfit, 
// TrailingStop) in our case, we check TakeProfit
// on a chart of less than 100 bars
   if(Bars<100)
     {
      Print("bars less than 100");
      return(0);  
     }
   if(TakeProfit<10)
     {
      Print("TakeProfit less than 10");
      return(0);  // check TakeProfit
     }
// to simplify the coding and speed up access
// data are put into internal variables
   MacdCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,0);
   MacdPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,1);
   SignalCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,0);
   SignalPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,1);
   MaCurrent=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,0);
   MaPrevious=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,1);

   total=OrdersTotal();
   if(total<1) 
     {
      // no opened orders identified
      if(AccountFreeMargin()<(1000*Lots))
        {
         Print("We have no money. Free Margin = ", AccountFreeMargin());
         return(0);  
        }
      // check for long position (BUY) possibility
      if(MacdCurrent<0 && MacdCurrent>SignalCurrent && MacdPrevious<SignalPrevious &&
         MathAbs(MacdCurrent)>(MACDOpenLevel*Point) && MaCurrent>MaPrevious)
        {
         ticket=OrderSend(Symbol(),OP_BUY,Lots(),Ask,3,0,Ask+TakeProfit*Point,"macd sample",16384,0,Green);
         if(ticket>0)
           {
            if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("BUY order opened : ",OrderOpenPrice());
           }
         else Print("Error opening BUY order : ",GetLastError()); 
         return(0); 
        }
      // check for short position (SELL) possibility
      if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious && 
         MacdCurrent>(MACDOpenLevel*Point) && MaCurrent<MaPrevious)
        {
         ticket=OrderSend(Symbol(),OP_SELL,Lots(),Bid,3,0,Bid-TakeProfit*Point,"macd sample",16384,0,Red);
         if(ticket>0)
           {
            if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("SELL order opened : ",OrderOpenPrice());
           }
         else Print("Error opening SELL order : ",GetLastError()); 
         return(0); 
        }
      return(0);
     }
   // it is important to enter the market correctly, 
   // but it is more important to exit it correctly...   
   for(cnt=0;cnt<total;cnt++)
     {
      OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
      if(OrderType()<=OP_SELL &&   // check for opened position 
         OrderSymbol()==Symbol())  // check for symbol
        {
         if(OrderType()==OP_BUY)   // long position is opened
           {
            // should it be closed?
            if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious &&
               MacdCurrent>(MACDCloseLevel*Point))
                {
                 OrderClose(OrderTicket(),OrderLots(),Bid,3,Violet); // close position
                 return(0); // exit
                }
            // check for trailing stop
            if(TrailingStop>0)  
              {                 
               if(Bid-OrderOpenPrice()>Point*TrailingStop)
                 {
                  if(OrderStopLoss()<Bid-Point*TrailingStop)
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Bid-Point*TrailingStop,OrderTakeProfit(),0,Green);
                     return(0);
                    }
                 }
              }
           }
         else // go to short position
           {
            // should it be closed?
            if(MacdCurrent<0 && MacdCurrent>SignalCurrent &&
               MacdPrevious<SignalPrevious && MathAbs(MacdCurrent)>(MACDCloseLevel*Point))
              {
               OrderClose(OrderTicket(),OrderLots(),Ask,3,Violet); // close position
               return(0); // exit
              }
            // check for trailing stop
            if(TrailingStop>0)  
              {                 
               if((OrderOpenPrice()-Ask)>(Point*TrailingStop))
                 {
                  if((OrderStopLoss()>(Ask+Point*TrailingStop)) || (OrderStopLoss()==0))
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Ask+Point*TrailingStop,OrderTakeProfit(),0,Red);
                     return(0);
                    }
                 }
              }
           }
        }
     }
   return(0);
  }
// the end.

double Lots()
  {
   double lot;
   lot=(AccountFreeMargin()*AccountLeverage()*Risk)/(MarketInfo(Symbol(), MODE_LOTSIZE));
   lot=NormalizeDouble(lot,1);
   return(lot);
  }

It goes something like this

noobys 2011.09.22 15:17 #2034

Vinin:
It goes something like this.

Thank you for your help!

Victor Nikolaev 2011.09.22 15:26 #2035

skyjet:
Thank you for your help!

Only the lot calculation function should be made universal

[Deleted] 2011.09.22 16:02 #2036

Hello.

I am a beginner in this business. So I'm asking for your help.

Here is a piece of code:

int start()
  {
  
    
   if(IsTesting())return;
 
      
    if (AccountBalance() < 111 ){
      Alert("Erorr Balance");
      return; 
      
    if (AccountNumber() != 11111){
      Alert("Error AccountNumber");
      return;}
      
   }

I want to make first check balance on amount if less than 111 then alert and return, if more then check on account number, if account is correct then trade if not then alert and return...

But for some reason it's only done individually if I remove AccountBalance or AccountNumber...

Probably a nouveau question, but what did I miss?

thanks

Elite indicators :) How to protect my Check - what have

Victor Nikolaev 2011.09.22 16:10 #2037

volodin_andrei:

Hello.

I am a beginner in this business. So I'm asking for your help.

Here is a piece of code:

I want to make first check balance on amount if less than 111 then alert and return, if more then check on account number, if account is correct then trade if not then alert and return...

But for some reason it's only done individually if I removeAccountBalance or AccountNumber...

Probably a nouveau question, but what did I miss?

thanks

Have you tried brackets (shaped brackets)?

int start()
  {
  
    
   if(IsTesting())return;
 
      
   if (AccountBalance() < 111 )
   {
       Alert("Erorr Balance");
       return(0); 
   }  
   if (AccountNumber() != 11111)
   {
       Alert("Error AccountNumber");
       return(0);
   }
   return(0);
}

There were enough brackets, but in the wrong places

[Deleted] 2011.09.22 16:38 #2038

I tweaked it with your help, but it fails to compile, so here's a screenshot, maybe there's an extra bracket or .... :(

DDFedor 2011.09.22 16:42 #2039

Find a text editor that has a parenthesis tracking function.

Всеволод 2011.09.22 16:47 #2040

Vinin:

And if there were also open positions in other instruments, or other EAs? Think about what you are writing.

Unfortunately, the description of the condition does not pretend to be complete and does not fully disclose the concept of the "40th order". Then it would be much easier to keep the number of open orders in the EA in a variable, rather than use the standard functions. The pending orders are a separate issue in this situation.

StopLimit Questions from Beginners MQL5 [ARCHIVE!] Any rookie question,

[ARCHIVE] Any rookie question, so as not to clutter up the forum. Professionals, don't pass by. Nowhere without you - 3. - page 204