I am using Envelope 2.13.1 version with good results for EURUSD M15 timeframe:
EA is attached (default settings).
I am using it with Alpari broker.
EA is not trading often but it is +3399 pips (4 digit pips) for 1 year trading (not backtesting), or 3,399 dollars by lot size = 0.1.
Stratement is attached.
May be - you are using ECN or stp broker so in this case - it may be the error #147 (something about expiration of pending orders). It works for non-ECN/non-stp brokers but it should be fixed for ECN/stp. We should ask MrTools - may be he can fix. or it may be some nature of ECN/stp brokers? bnecause this EA is placing hedge pending orders ...
By the way - it works for Alpari but it should be fixed for FXCM (ecn/stp) brokers.
rosalieone: Thanks for the answer, i hope MrTools is ok to fix the ECN problem.
Best regards
Rosalie
Hi Rosalie,
Am confident its fixed for ecn brokers now also did a lot of cleaning and rearranging of the code which in my opinion it really needed.Did a lot of research on pending orders and ecn brokers, found quite a few that will allow you to place your pending orders with stop loss and takeprofit in fact couldn't find any that didn't allow this, so have an external parameter, EcnBroker = false; probably best to leave it like this, unless there is a problem with it opening trades, what i learned from Mladen was the expiration might have been the problem, some ecn type brokers, will let you place an expiration on your placed orders and some don't,some after 1 minute you can place your expiration, some up to 10 minutes, long story a little shorter this was fixed by Mladen.
Just a brief idea how this Ea works for those who don't know, it is basically a envelope breakout Ea it will place buystops, 3 of them inside the Envelope after price closes outside the Envelope and also at the same time place sell stops 3 of them inside the Envelope after price closes outside the lower envelope, the distance is an external parameter called MinDistance = 10, its distance from lower and upper envelope, by default its set to 10 pips, this should be where the Ea will place its pending orders, for sell its lower envelope + min distance and buy stops its upper envelope - min distance . Didn't change the strategy from the original, yet
ps) did a 4 month back test on m15 EurUsd, results attached
Am confident its fixed for ecn brokers now also did a lot of cleaning and rearranging of the code which in my opinion it really needed.Did a lot of research on pending orders and ecn brokers, found quite a few that will allow you to place your pending orders with stop loss and takeprofit in fact couldn't find any that didn't allow this, so have an external parameter, EcnBroker = false; probably best to leave it like this, unless there is a problem with it opening trades, what i learned from Mladen was the expiration might have been the problem, some ecn type brokers, will let you place an expiration on your placed orders and some don't,some after 1 minute you can place your expiration, some up to 10 minutes, long story a little shorter this was fixed by Mladen.
Just a brief idea how this Ea works for those who don't know, it is basically a envelope breakout Ea it will place buystops, 3 of them inside the Envelope after price closes outside the Envelope and also at the same time place sell stops 3 of them inside the Envelope after price closes outside the lower envelope, the distance is an external parameter called MinDistance = 10, its distance from lower and upper envelope, by default its set to 10 pips, this should be where the Ea will place its pending orders, for sell its lower envelope + min distance and buy stops its upper envelope - min distance . Didn't change the strategy from the original, yet
ps) did a 4 month back test on m15 EurUsd, results attached
Your the one , thanks a lot, i will spent these next days using it and i will show my results.
rosalieone: Just one question before i start. Do you use other settings than the basic one (predefined) ?
Best regards
Rosalie
I would definitely go with Newdigital's settings he has been diligently testing this Ea for a long time, the preferred settings were put in awhile back in case a person may find different settings than the default ones fordifferent pairs..
mrtools: I would definitely go with Newdigital's settings he has been diligently testing this Ea for a long time, the preferred settings were put in awhile back in case a person may find different settings than the default ones fordifferent pairs..
Allow the use of cookies to log in to the MQL5.com website.
Please enable the necessary setting in your browser, otherwise you will not be able to log in.
You are signed in. Two-factor authentication has been disabled. Set it up again and scan a new QR code, or continue with two-factor authentication disabled.
From this post #11?
https://www.mql5.com/en/forum/176044
I am using Envelope 2.13.1 version with good results for EURUSD M15 timeframe:
EA is attached (default settings).
I am using it with Alpari broker.
EA is not trading often but it is +3399 pips (4 digit pips) for 1 year trading (not backtesting), or 3,399 dollars by lot size = 0.1.
Stratement is attached.
May be - you are using ECN or stp broker so in this case - it may be the error #147 (something about expiration of pending orders). It works for non-ECN/non-stp brokers but it should be fixed for ECN/stp. We should ask MrTools - may be he can fix. or it may be some nature of ECN/stp brokers? bnecause this EA is placing hedge pending orders ...
By the way - it works for Alpari but it should be fixed for FXCM (ecn/stp) brokers.
Thanks for the answer, i hope MrTools is ok to fix the ECN problem.
Best regards
Rosalie
Thanks for the answer, i hope MrTools is ok to fix the ECN problem.
Best regards
RosalieJust for information will see if i can fix it!
Thanks for the answer, i hope MrTools is ok to fix the ECN problem.
Best regards
RosalieHi Rosalie,
Am confident its fixed for ecn brokers now also did a lot of cleaning and rearranging of the code which in my opinion it really needed.Did a lot of research on pending orders and ecn brokers, found quite a few that will allow you to place your pending orders with stop loss and takeprofit in fact couldn't find any that didn't allow this, so have an external parameter, EcnBroker = false; probably best to leave it like this, unless there is a problem with it opening trades, what i learned from Mladen was the expiration might have been the problem, some ecn type brokers, will let you place an expiration on your placed orders and some don't,some after 1 minute you can place your expiration, some up to 10 minutes, long story a little shorter this was fixed by Mladen.
Just a brief idea how this Ea works for those who don't know, it is basically a envelope breakout Ea it will place buystops, 3 of them inside the Envelope after price closes outside the Envelope and also at the same time place sell stops 3 of them inside the Envelope after price closes outside the lower envelope, the distance is an external parameter called MinDistance = 10, its distance from lower and upper envelope, by default its set to 10 pips, this should be where the Ea will place its pending orders, for sell its lower envelope + min distance and buy stops its upper envelope - min distance . Didn't change the strategy from the original, yet
ps) did a 4 month back test on m15 EurUsd, results attached
Updated statement of Envelope 2.13.1 version EA, M15 timeframe, EURUSD:
Mrtools
Hi Rosalie,
Am confident its fixed for ecn brokers now also did a lot of cleaning and rearranging of the code which in my opinion it really needed.Did a lot of research on pending orders and ecn brokers, found quite a few that will allow you to place your pending orders with stop loss and takeprofit in fact couldn't find any that didn't allow this, so have an external parameter, EcnBroker = false; probably best to leave it like this, unless there is a problem with it opening trades, what i learned from Mladen was the expiration might have been the problem, some ecn type brokers, will let you place an expiration on your placed orders and some don't,some after 1 minute you can place your expiration, some up to 10 minutes, long story a little shorter this was fixed by Mladen.
Just a brief idea how this Ea works for those who don't know, it is basically a envelope breakout Ea it will place buystops, 3 of them inside the Envelope after price closes outside the Envelope and also at the same time place sell stops 3 of them inside the Envelope after price closes outside the lower envelope, the distance is an external parameter called MinDistance = 10, its distance from lower and upper envelope, by default its set to 10 pips, this should be where the Ea will place its pending orders, for sell its lower envelope + min distance and buy stops its upper envelope - min distance . Didn't change the strategy from the original, yet
ps) did a 4 month back test on m15 EurUsd, results attachedYour the one
, thanks a lot, i will spent these next days using it and i will show my results.
Thanks again and have a nice week-end
Rosalie
Your the one
Thanks again and have a nice week-end
RosalieJust one question before i start. Do you use other settings than the basic one (predefined) ?
Best regards
Rosalie
Hi rosalieone,
If this question is to me so I am using default settings for this version (post #512):
https://www.mql5.com/en/forum/173366/page35
Just one question before i start. Do you use other settings than the basic one (predefined) ?
Best regards
RosalieI would definitely go with Newdigital's settings he has been diligently testing this Ea for a long time, the preferred settings were put in awhile back in case a person may find different settings than the default ones fordifferent pairs..
I would definitely go with Newdigital's settings he has been diligently testing this Ea for a long time, the preferred settings were put in awhile back in case a person may find different settings than the default ones fordifferent pairs..
Thanks to both of you !