Exp5 Close Minus by Plus for MT5
FREE
Yayınlandı:
4 Mayıs 2021
Mevcut sürüm:
25.977
Uygun bir robot bulamadınız mı?
Freelance üzerinden kendi
robotunuzu sipariş edin
Freelance'e git
Freelance üzerinden kendi
robotunuzu sipariş edin
Bir alım-satım robotu veya gösterge nasıl satın alınır?
Uzman Danışmanınızı
sanal sunucuda çalıştırın
sanal sunucuda çalıştırın
Satın almadan önce göstergeyi/alım-satım robotunu test edin
Mağazada kazanç sağlamak ister misiniz?
Satış için bir ürün nasıl sunulur?
Alım-satım fırsatlarını kaçırıyorsunuz:
- Ücretsiz alım-satım uygulamaları
- İşlem kopyalama için 8.000'den fazla sinyal
- Finansal piyasaları keşfetmek için ekonomik haberler
Kayıt
Giriş yap
Gizlilik ve Veri Koruma Politikasını ve MQL5.com Kullanım Şartlarını kabul edersiniz
Hesabınız yoksa, lütfen kaydolun
паррпап
Пример работы советника.
полная инструкция на русском: https://www.expforex.com/publ/ea_from_expforex/exp_close_minus_by_plus_perekryvaem_ubytochnye_pozicii_putem_nakhozhdenija_i_zakrytija_pribylnykh_pozicij/4-1-0-123
Full guide English: https://www.expforex.com/publ/english_guide_and_article/exp_close_minus_by_plus_we_cover_loss_making_positions_by_finding_and_closing_of_profitable_positions/11-1-0-189
Hello,
Thank you for the free tool! But there are two bugs ( v21.504 ; MT5 Build 2940).
" You can specify multiple magic numbers, separated by commas. ":
Only the trades of the first Magic are found. A space after the comma or a semicolon instead of the comma doesn't help either. I also swapped the two magics, but then only the other magic is found, which was now the first and before the second.
"MinLossInUnit":
If you change the value, the current value is not displayed, but always the one before it. This remains the case even after several changes. The update interval has no influence. Even with 1 second that doesn't change.
Hello,
Thank you for the free tool! But there are two bugs ( v21.504 ; MT5 Build 2940).
" You can specify multiple magic numbers, separated by commas. ":
Only the trades of the first Magic are found. A space after the comma or a semicolon instead of the comma doesn't help either. I also swapped the two magics, but then only the other magic is found, which was now the first and before the second.
"MinLossInUnit":
If you change the value, the current value is not displayed, but always the one before it. This remains the case even after several changes. The update interval has no influence. Even with 1 second that doesn't change.
Hello,
Thank you for the free tool! But there are two bugs ( v21.504 ; MT5 Build 2940).
" You can specify multiple magic numbers, separated by commas. ":
Only the trades of the first Magic are found. A space after the comma or a semicolon instead of the comma doesn't help either. I also swapped the two magics, but then only the other magic is found, which was now the first and before the second.
"MinLossInUnit":
If you change the value, the current value is not displayed, but always the one before it. This remains the case even after several changes. The update interval has no influence. Even with 1 second that doesn't change.
Please Redawnload
these parameters are changed very rarely when the advisor finds the required trades. in order not to boot the system, I turned off the constant update.
About the Magic bug:
Of course, I had first tried only comma without space, and only because that did not work, I had tried other possibilities.
Magic 125778 with 3 trades each 0.1 lot = 0.3 lot
Magic 125775 with 3 trades each 0,05 Lot = 0,15 Lot
125778,125775 resulted in a display of 3 (0,3)
125775,125778 resulted in a display of 3 (0.15)
So only the first Magic was recognized!
About the MinLossInUnit bug:
But then why was the value for AdditionalProfitInUnit always displayed correctly after each change?
What is so bad about admitting that you made a mistake and the software had bugs?
About the Magic bug:
Of course, I had first tried only comma without space, and only because that did not work, I had tried other possibilities.
Magic 125778 with 3 trades each 0.1 lot = 0.3 lot
Magic 125775 with 3 trades each 0,05 Lot = 0,15 Lot
125778,125775 resulted in a display of 3 (0,3)
125775,125778 resulted in a display of 3 (0.15)
So only the first Magic was recognized!
About the MinLossInUnit bug:
But then why was the value for AdditionalProfitInUnit always displayed correctly after each change?
What is so bad about admitting that you made a mistake and the software had bugs?
Sure, but the changelog and your post doesn't indicate that the bugs have been fixed:
Tested and absolutely none of the bugs were fixed!
Tested and absolutely none of the bugs were fixed !
Thanks for the information on the MinLossInUnit display error - now I understand what you are talking about. Corrected, updated.
Regarding the display of information on magic: Yes, the panel displays only information about only one magic number. This magic comes first in the list. This is for general information. Since the panel is the same for all Expert Advisors.
Only one magic number is displayed here.
This does not apply to the algorithm! This is just information. Unfortunately, this cannot be changed.
Regarding the display of information on magic: Yes, the panel displays only information about only one magic number. This magic comes first in the list. This is for general information. Since the panel is the same for all Expert Advisors.
Only one magic number is displayed here.
This does not apply to the algorithm! This is just information. Unfortunately, this cannot be changed.
Hm, but if I delete the magic numbers and set it to the default (-1 for manage all trades regardless there magics) all 6 trades with there sum of lots are correcty displayed.
It should be possible to add the number of trades for the set magics, and the same for their lot sizes.
The purpose of the display is to see how the sums of the trades to be managed are. You must be able to rely on the correctness of the display. If only a part is displayed, you can absolutely not trust the tool, because other values such as the P/L sum are therefore not correct. A wrong information is basically worse than none at all!
-1 means everything, so the EA ignores magic numbers when set to -1.
If several magic numbers are set, then only the first of them is taken into account.
I understand your position, but at the moment I cannot change it.
I will add this wish to the list of tasks for the future.
Calculate the SWAP before closing?
The 17:50 closing is correct, but the 18:11 is negative
Calculate the SWAP before closing?
The 17:50 closing is correct, but the 18:11 is negative
The EA does not work in update MT5. The same story with Profit or Loss Pad EA which bought. Even if I downloaded a updates one those EA does not work. See screenshots below.
The EA does not work in update MT5. The same story with Profit or Loss Pad EA which bought. Even if I downloaded a updates one those EA does not work. See screenshots below.
The EA does not work in update MT5. The same story with Profit or Loss Pad EA which bought. Even if I downloaded a updates one those EA does not work. See screenshots below.
Please update
Fixed a bug with drawing objects for new versions of MT5 terminal
@Vadim V.
Hello
Can you update this EA in the mt5 and try again?
Could you correct this little spelling mistake?
Is it possible to put fewer digits in the GUI?