Mağaza / MetaTrader 5 / Yardımcı programlar /

LM Custom Clean Renko Chart

FREE

Yayınlandı: 14 Kasım 2026

Mevcut sürüm: 1.10

Yazarın diğer ürünleri

Uygun bir robot bulamadınız mı?
Freelance üzerinden kendi
robotunuzu sipariş edin

Freelance'e git

Bir alım-satım robotu veya gösterge nasıl satın alınır?

Uzman Danışmanınızı
sanal sunucuda çalıştırın

Satın almadan önce göstergeyi/alım-satım robotunu test edin

Mağazada kazanç sağlamak ister misiniz?

Satış için bir ürün nasıl sunulur?

Genel Bakış
Değerlendirmeler
Yorumlar

LM Custom Clean Renko Chart

Yardımcı programlar
Luciano Mores
Luciano Mores
Brezilya

18
Sürüm: 1.10

LM Custom Clean Renko Chart builds a Renko view of the symbol in a chart of its own. The brick is defined in account currency, not in points, so the same configuration is easy to compare between instruments quoted in different units. How it works: attach the EA to an M1 chart of the symbol, set the brick size (from 0.01 to 864) and the EA creates a custom symbol, feeds it from the chart prices and shows only the completed bricks. Each chart instance keeps its own brick size, so the same symbol can be read on a fine and on a coarse Renko at the same time on two charts. The clean chart has its own history, so your working chart stays free for orders, indicators and templates. Because only completed bricks are drawn, the noise of the small fluctuations inside the brick disappears and the sequence of colours becomes the main information. The EA works with native terminal resources only: no DLL, no external service, no file written outside the terminal sandbox. When it is removed, it deletes the objects it created. Features: - Renko chart on a custom symbol created by the EA itself. - Brick size in account currency, from 0.01 to 864, one value per chart. - Built to run on M1. - Only completed bricks are drawn, which removes the internal fluctuation of each brick. - Keeps the clean chart separate from your working chart, your indicators and your orders. - Native terminal resources only: no DLL, no WebRequest, no external service. - Removes its own chart objects when it is detached. Input parameters: - InpSeconds (double, 1.0) - Renko brick size in account currency (the input keeps its historical name). Attach on M1. Range 0.01 to 864. Important: - This product does not trade. It does not send, modify or close orders and it does not need trading permission. - Attach it to an M1 chart. The bricks are built from the ticks that reach the terminal; with a thin market, a closed session or a disconnected terminal, new bricks are not produced until ticks arrive. - The Renko chart is a filtered view of the price, not the traded price. A level read on the clean chart differs from the same level on the candle chart, so do not copy stop and take levels between them. - The EA creates a custom symbol in the terminal. It is a normal terminal object and can be removed when the EA is no longer used.

daha fazla...

Ekran görüntüsü #1 LM Custom Clean Renko Chart

Ekran görüntüsü #2 LM Custom Clean Renko Chart

Ekran görüntüsü #3 LM Custom Clean Renko Chart

Ekran görüntüsü #4 LM Custom Clean Renko Chart

Ekran görüntüsü #5 LM Custom Clean Renko Chart

LM PRODUCTS INSTRUCTIONS is the manual reader of the LM line. It is one program that carries every manual of the line inside itself, so the documentation is always at hand in the terminal, in the language the reader chooses. The panel opens on a fixed black background with blue buttons, white and grey text. The top bar has two buttons only: the expanding arrow, which opens the list of items, and the language button, which switches between ten languages (AUTO, PT, EN, ES, DE, FR, IT, RU, ZH, JA a

LM Chart and MACD is a chart indicator. Attach it to a chart and it places, in one step, the moving averages and the support and resistance step lines on the main window, and opens one sub-window with MACD and R.S.I. already configured. The set it installs is the one used in the LM reading: a short moving average, a long moving average and a slower trend average on the price window, plus the step lines that mark the support and resistance levels. In the sub-window it brings the MACD line, its si

LM Chart and STOCH is a chart indicator. Attach it to a chart and it places, in one step, the moving averages and the support and resistance step lines on the main window, and opens one sub-window with Stochastic and R.S.I. already configured. The set it installs is the one used in the LM reading: a short moving average, a long moving average and a slower trend average on the price window, plus the step lines that mark the support and resistance levels. In the sub-window it brings the Stochastic

LM Chart STOCH and MACD is a chart indicator. Attach it to a chart and it places, in one step, the moving averages and the support and resistance step lines on the main window, and opens two sub-windows: Stochastic with R.S.I. in the first, MACD in the second. The set it installs is the one used in the LM reading: a short moving average, a long moving average and a slower trend average on the price window, plus the step lines that mark the support and resistance levels. In the first sub-window i

LM Custom Clean Candle SECONDS Chart builds a chart that does not exist in the terminal: a candle chart on an interval written in seconds. How it works: attach the EA to an M1 chart of the symbol, set InpSeconds to the interval you want (15, 30, 60, 120, 300, up to 3600) and the EA creates a custom symbol, feeds it from the chart prices and shows the candles of that interval. Each chart instance keeps its own value, so the same symbol can be read on two different intervals at the same time on tw

LM Custom Clean Heikin Chart is a small charting tool. Attach it to a chart and it creates a custom symbol fed by that same market, so you can read the Heikin Ashi series on a chart of its own instead of overloading your working chart. The Heikin average smooths the candle body and the open, which removes part of the noise of the raw series and makes the sequence of colours easier to follow. Because the calculation runs on a custom symbol, the clean chart keeps its own history while the real cha

LM Custom Clean Heikin SECONDS Chart combines two ideas: the smooth reading of Heikin Ashi candles and an interval written in seconds instead of the time frames offered by the terminal. How it works: attach the EA to an M1 chart of the symbol, set InpSeconds to the interval you want (15, 30, 60, 120, 300, up to 3600) and the EA creates a custom symbol, feeds it from the chart prices and shows the Heikin series on that interval. Each chart instance keeps its own value, so the same symbol can be r

LM CANDLE AUTO SIGNAL Chart reads the current candle chart and translates the technical reading into a single on-chart panel: the conditions, their state, the confluence between assets and the volatility projections in account currency. Technical engine: opposite engulfing candle; Stochastic %K against %D; RSI at adjustable bottom and top levels; MACD with fast, slow and signal periods; dual moving average crossover with both methods; a single simple moving average for the trend. Each condition

89 USD

LM CANDLE SECONDS AUTO SIGNAL Chart is the seconds build of the LM candle panel. The difference is in the clock: instead of the time frames offered by the terminal, you type the time frame you want in seconds. How it works: attach the EA to an M1 chart of the symbol, set InpSeconds to the value you want (15, 30, 60, 120, 300, up to 3600) and the panel builds its reading on that interval. Each chart instance keeps its own value, so two charts of the same symbol can show, for example, 15 seconds a

89 USD

LM HEIKIN AUTO SIGNAL Chart works with Heikin Ashi candles. The EA creates a custom Heikin symbol, feeds it from the chart prices and keeps it clean, so the reading is made on the Heikin series instead of the raw candles. Technical engine: opposite engulfing candle; Stochastic %K against %D; RSI at adjustable bottom and top levels; MACD with fast, slow and signal periods; dual moving average crossover with both methods; a single simple moving average for the trend. Each condition has its own per

89 USD

LM HEIKIN SECONDS AUTO SIGNAL Chart joins the two ideas of the family: Heikin Ashi candles and a time frame written in seconds. How it works: attach the EA to an M1 chart, set InpSeconds to the value you want (15, 30, 60, 120, 300, up to 3600), and the EA creates a clean Heikin custom chart on that interval and reads it. Each chart instance keeps its own value, so two charts of the same symbol can work on, for example, 30 seconds and 300 seconds at the same time. Technical engine: opposite engul

89 USD

LM RENKO AUTO SIGNAL Chart builds a Renko view of the symbol and reads it. The brick is defined in account currency, not in points: the input is the price distance of one brick in the currency of the asset, which makes the same configuration easy to compare between instruments quoted in different units. How it works: attach the EA to an M1 chart of the symbol, set the brick size (from 0.01 to 864, in account currency), and the EA creates a clean Renko custom chart and keeps feeding it. Each char

99 USD

LM AUTO STOP TA PRO with SMC is the stop and exit build of the LM panel family. It attaches to a chart, takes control of the positions selected by magic number and manages the exit of each one, while the same window shows the SMC map and the timing of every action. Management scope: the magic list defines which positions the EA is responsible for. The value 0 refers to a position opened directly from the terminal, and an empty list means all magics, which should be used with care on an account t

299 USD

LM Auto Trade TA Pro with SMC is a chart panel that combines manual entry with automatic management of the positions it is responsible for. It is the entry build of the LM family: the same window opens positions with its own buttons, while LM Auto Stop is centred on monitoring and closing positions that already exist. Entry: the panel has BUY and SELL buttons with their own lot size, and the order is sent with the magic number configured in the inputs. Positions opened outside the panel can also

499 USD

LM Fundamentals Macroanalysis is an on-chart panel for the economic calendar that MetaTrader 5 already provides. It does not scrape websites, it does not open a browser and it does not use any external service: the events come from the terminal calendar database itself. Attach the EA to any chart, any symbol and any timeframe. The panel lists the events for the currencies you choose, filtered by importance, and shows the calendar values (actual, forecast and previous) plus the date and time of e

Filtrele:

Değerlendirme yok

LM Custom Clean Renko Chart

Luciano Mores