Yalnızca ürünü satın alan veya kiralayan kullanıcılar yorum yazabilir
12
czd3119  

Thank you very much for the strategy you developed. The trading accuracy is very good. I currently have two questions regarding the stop-loss and take-profit functions. What is the retracement distance parameter for the take-profit function? The stop-loss function also seems to automatically adjust.


Nguyen Hang Hai Ha  
czd3119 #:

Hello, Stop Loss is moved according to Trailing to close positions. So the position can be closed before hitting Take Profit with a smaller profit than Full Take Profit.

Losing positions are usually closed by position management strategy or hit the original Stop Loss or are closed when the trend has changed (parameter: Close By Trend Changed = True).

So you often see positions closing before hitting the Take Profit or before hitting the initial Stop Loss.

Nguyen Hang Hai Ha  
Sometimes, the fluctuations are too fast (within 1 ~ 10ms or faster than VPS latency, or price gap) causing the Trailing Stop Loss to "slip" towards the loss, closing the position at a loss, at this time the reason is the fluctuations and latency causing the transaction to be at a loss instead of a profit.

For example: Buy position at 4260.46 and the price increases to 4261.46, the EA moves the Stop Loss to the Bid price - 10(point) (expected at 4261.36 with profit) but immediately after that the price jumps a gap or jerks quickly to 4255.17 in 1 to 5ms (example) and at this time the Stop Loss is executed at 4255.07 and then matches the loss. This situation often appears when the price fluctuates too fast. This is a hypothetical situation to explain about gap, slippage, order slippage... so you understand some losses can appear unexpectedly like that.
Nguyen Hang Hai Ha  
For Gold trading, you can fine-tune the EA's time filter (Time Start and Time End) to optimize performance across different market sessions. Consider your current latency and the speed of price movement during the US session.

For example, if your latency is high (e.g., 50ms) and prices move up to 100 points within 20ms during the US session, your EA may not be able to place orders fast enough, resulting in slippage.

In this case, it's better to set the EA to trade only during the Asian session, where price movements are more stable and consistent. This helps reduce the impact of latency and improves execution quality.

Tip: To trade only during the Asian session, set the Time Start to 01:30 and Time End to 07:00. This helps avoid high volatility periods and reduces the impact of latency.
art2702  

Hello,

This is a great robot! I have a question.

Do you recommend keeping the default EA settings for Gold, even if the price has less than 3 decimal places?

Thank you

Nguyen Hang Hai Ha  
art2702 #:

Hello,

This is a great robot! I have a question.

Do you recommend keeping the default EA settings for Gold, even if the price has less than 3 decimal places?

Thank you

Hello

For 3-digit Gold symbols, you should increase the Max Spread, Trailing Stop, Start Trailing, Take Profit, and Stop Loss parameters by 10x, because the Pip and Point values differ by a factor of 10 between 2-digit and 3-digit symbols.


akira1212  
I made a purchase but there are no transactions. What is the reason?
Nguyen Hang Hai Ha  
akira1212 #:
I made a purchase but there are no transactions. What is the reason?

Hi, in most cases there is no special reason, it just takes a little time for the signal logic settings to appear and then the EA will open a trade order according to that signal. This means it can take up to 48 hours for you to see the first trade order.

You can see the attached image to see that there are periods of many hours without trading orders

However, you should also check your settings, make sure you keep MT4 online 24/5. The solution is to use VPS to ensure a continuous connection with low latency. If you use PC/Laptop make sure you have turned off auto sleep mode. 

Check the information appearing on the chart if there is any.

Check the pair name is correct, because XAUUSD can be written with many different names like XAUUSDm XAUUSDpro XAUUSDraw or GOLD...

Check your account type is working properly, avoid account types with tag 'disable trade' or 'account with bonus', because brokers usually do not allow EA on bonus.

Check Enable Auto Trading and Allow Live Trading

Check spread

If it is a 3 digit account, you need to edit the parameters Max Spread, Take Profit, Stop Loss, Trailing, Start Trailing with the value x10 default value.

t

acchana24  
The default parameters are not profitable at all.

Do I need to change the parameters?

Also, which broker would you like?
Mohammed Habeeb  
Hi I am using Justmarkets ecn raw spread account but still not profitable making losses it's like 5 profitable trades and 1 sl then all gone + minus balance going down only
akira1212  
グエン・ハン・ハイ・ハ # :

こんにちは。ほとんどの場合、特別な理由はありません。逆ロジックの設定が表示され、EAがそれに応じて取引注文を開始するまでに少し時間がかかるだけです。

添付画像を見ると、取引注文がない期間が何時間もあることがわかります。

ただし、設定も確認し、MT4が24時間365日オンライン状態を維持できるようにしてください。 解決策としては、VPSを使用して低遅延で継続的な接続を確保することです。 PC/ラップトップをご利用の場合は、自動スリープモードがオフになっていることを確認してください。 

チャートに情報が表示されている場合はそれを確認します。

XAUUSD は、XAUUSDm、XAUUSDpro、XAUUSDraw、GOLD など、さまざまな名前で表記される可能性があるため、ペア名が正しいことを確認してください。

アカウントの種類が正しく機能していることを確認してください。 ブローカーは通常、ボーナスでのEAを許可しないため、「取引を有効にする」または「ボーナス付きのアカウント」というタグが付いたアカウントの種類は避けてください。

自動取引を有効にするとライブ取引を許可するをチェックします

チェックスプレッド

3桁のアカウントの場合は、Max Spread、Take Profit、Stop Loss、Trailing、Start Trailingのパラメータを当然値のx10に編集する必要があります。

Thank you for your help. It has been over 48 hours since it was launched, but there have been no transactions yet. The version is 1.3. It is an XM KIWAMI Koza. I have checked other options and nothing seems to be wrong. I would appreciate it if you could let me know if there is anything that could be causing the lack of transactions.

アキラ1212 #:
購入したのですが、取引がありません。理由は何でしょうか？
Dosyalar:
unnamed.jpg  169 kb
Nguyen Hang Hai Ha  
akira1212 #:
Hello, your pair name is GOLD# which shows that it seems to be a less popular broker.

Some rare cases are brokers that do not allow the use of EAs, or have hidden rules that prevent the operation of EAs.

+ So, check your account status (e.g., disabled trading status, which may prevent you from opening a trade).
+ Check the currency account and lot size: EA calculates lot size according to Balance, if your currency account is JPY, the lot size may be too large and there is not enough balance to open an order, the solution is to use Fixed Lot = your lot size.
+ Try with another more popular broker.
Nguyen Hang Hai Ha  
akira1212 #:
Your account balance is 8847 JPY which is equivalent to 56 USD
Lot Size is 0.3 which is too big and the balance is not enough to open a trade

The solution is to use (setting) Fixed Lot = 0.01
akira1212  
Thank you for your reply. I will try 0.01 lots.
If it still doesn't work, I would appreciate it if you could recommend a broker. In that case, please let me know the minimum deposit amount for a broker with a proven track record.
akira1212  
I tried to set it up. Please let me know if there are any mistakes.
Dosyalar:
unnamed.jpg  68 kb
Nguyen Hang Hai Ha  
akira1212 #:
I tried to set it up. Please let me know if there are any mistakes.
After installing correctly, you just need to be patient. EA (most EA) usually do not open 1 order immediately after installation, signals need time. Just be patient.
akira1212  
なんとか動作させることはできたのですが、このブローカーでは成果が出ていないようです。このEAを使って利益を出せるブローカーを教えていただけますか？
Dosyalar:
unnamed.jpg  200 kb
akira1212  
I managed to get it to work, but it seems I'm not seeing results with this broker. Can you tell me which brokers I can use this EA with to make a profit?
Nguyen Hang Hai Ha  
akira1212 #:
I managed to get it to work, but it seems I'm not seeing results with this broker. Can you tell me which brokers I can use this EA with to make a profit?
You can try with roboforex, cent account type here is also suitable for small balance.

For Gold, there is a time filter (Start Time, End Time) that you can fine-tune to make the EA work most effectively during the seasons. You can consider between your current latency and the speed of price movement in the US session to plan to use the appropriate time filter. If you have high latency (e.g. 50ms or not use VPS) and see that the price moves up to 100 points in 20ms during the US session, it is clear that the EA's order placement speed cannot keep up with the price movement speed, causing your execution price to be worse than during the US session, which is slippage due to latency. From there, you set a filter for the EA to trade only during the Asian session for more stable and consistent results and avoid the risks of high latency.

Example: Time Start: 1:30 Time End: 7:30 to trade consistently and steadily.

There is a way to manage EA like this: start running EA from Asian session, in the first 2 hours if you see good results then continue to let it run for the next 3 to 5 hours. If the profit meets expectations then turn off EA to start again the next day. If in the first 2 to 3 hours of Asian session, the results are bad showing that the day's fluctuations may not be suitable then turn off EA to cut small losses and come back the next day. To control risk and maintain stability.

Gold is very volatile so I usually just let it run during the Asian session then close manual before US seasion.
akira1212  
I have checked the contents. Will I make a profit if I use Roboforex?
I think it would be difficult to follow the instructions exactly as written because I have a job and can only use an EA that will make a profit if it is run as is.
Unfortunately, I understand that this EA will not make a profit if you leave it alone.
Yalnızca ürünü satın alan veya kiralayan kullanıcılar yorum yazabilir
12