Modify a free martingale system based EA

MQL4 Uzmanlar

İş tamamlandı

Tamamlanma süresi: 3 gün
Müşteri tarafından geri bildirim
this person has no time to deal, he finds an excuse or the other and moves ahead
Geliştirici tarafından geri bildirim
Be careful - this customer try to get You to do extra work for free, threatening not to complete already performed job. Use arbitration without hesitation

Şartname

hi

 

I like this below given free EA, it is martingale based EA, the EA from below code places a 0.01 lots order, and if the order is in loss, then it will put second order with 0.02 lots to even out the loosing order, and it keeps on making multiple orders of 0.03 , 0.04 etc lots to even out the loosing trades, i like this. But, the problem is that i do not want the EA to place the second order of 0.02 lots, instead the EA should place 2 orders at 15 seconds interval of 0.01 lots each, and for 0.03 lot, it should put 3 orders of 0.01 lots each at 15 seconds interval and so on.... i think you can use for loop for it... or whatever suitable

 Please note it that i want the results of the below EA and the modified EA to be SAME, by same i don't mean exactly same, but the result should be almost 95% same.... 

Also, i would like to tell you that i have already tried to put the mult = 1, by doing so, the EA does not make a single order by 0.02 lots, it does as i wanted, it does 0.01 lots 2 orders, but the problem here is that the second order is generated about 1 hour late as it waits for the occurrence of the stochastic to put the next order to even out the loosing order... and this makes the EA go in loss

 so as i said above, i just want the EA to put 2 orders of 0.01 instead of 0.02... and 3 orders of 0.01 instead of 0.03 and so on...

or however it is possible.... use your logic....

 all i need is the same performance but not the order of 0.02 or 0.03, all orders should be of constant lot 0.01 only and result should be same, the orders should be with 15 seconds gap

 the reason for the 15 second gap and constant lot size.... all i can tell is that i want this EA to be placed on a system as an account manager and the company has the rule of 15 second gap and constant lot size, so that is the reason i want this EA to be modified

 

thanks ..below is the code to be modified

 

//+------------------------------------------------------------------+
//|                                                          aaa.mq4 |
//|                      Copyright © 2007, MetaQuotes Software Corp. |
//|                                        http://www.metaquotes.net |
//+------------------------------------------------------------------+
#property copyright "Copyright © 2007, MetaQuotes Software Corp."
#property link      "http://www.metaquotes.net"
extern double step=25;
extern int StepMode=0;
// Åñëè StepMode = 0, òî øàã ìåæäó îðäåðàìè ôèêñèðîâàííûé è ðàâåí step
// Åñëè StepMode = 1, òî øàã ïîñòåïåííî óâåëè÷èâàåòñÿ
extern double proffactor=10;
extern double mult=1.5;
extern double lotsbuy=0.01;
extern double lotssell=0.01;  
extern double per_K=200;
extern double per_D=20;
extern double slow=20;
extern double zoneBUY=50;
extern double zoneSELL=50;
extern double Magicbuy=555;
extern double Magicsell=556;
double openpricebuy,openpricesell,lotsbuy2,lotssell2,lastlotbuy,lastlotsell,tpb,tps,cnt,smbuy,smsell,lotstep,
ticketbuy,ticketsell,maxLot,free,balance,lotsell,lotbuy,dig,sig_buy,sig_sell,ask,bid;                           
                                int OrdersTotalMagicbuy(int Magicbuy)
 {
   int j=0;
   int r;
   for (r=0;r<OrdersTotal();r++)
   {
     if(OrderSelect(r,SELECT_BY_POS,MODE_TRADES))
     {
        if (OrderMagicNumber()==Magicbuy) j++;
     }
   }   
 return(j); 
 }

                                int OrdersTotalMagicsell(int Magicsell)
{
   int d=0;
   int n;
   for (n=0;n<OrdersTotal();n++)
   {
     if(OrderSelect(n,SELECT_BY_POS,MODE_TRADES))
     {
        if (OrderMagicNumber()==Magicsell) d++;
     }
   }    
 return(d);
  }     
                                      int orderclosebuy(int ticketbuy)
     {
string symbol = Symbol();
int cnt;
    for(cnt = OrdersTotal(); cnt >= 0; cnt--)
       {
       OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);       
       if(OrderSymbol() == symbol && OrderMagicNumber()==Magicbuy) 
         {
         ticketbuy=OrderTicket();OrderSelect(ticketbuy, SELECT_BY_TICKET, MODE_TRADES);lotsbuy2=OrderLots() ;                         
         double bid = MarketInfo(symbol,MODE_BID); 
         RefreshRates();
         OrderClose(ticketbuy,lotsbuy2,bid,3,Magenta); 
         }
       }
       lotsbuy2=lotsbuy;return(0);
     } 
                                      int orderclosesell(int ticketsell)
     {
string symbol = Symbol();
int cnt;   
    for(cnt = OrdersTotal(); cnt >= 0; cnt--)
       {
       OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);       
       if(OrderSymbol() == symbol && OrderMagicNumber()==Magicsell) 
         {
         ticketsell=OrderTicket();OrderSelect(ticketsell, SELECT_BY_TICKET, MODE_TRADES);lotssell2=OrderLots() ;                         
         double ask = MarketInfo(symbol,MODE_ASK); 
         RefreshRates();
         OrderClose(ticketsell,lotssell2,ask,3, Lime); 
         }
       }
       lotssell2=lotssell;return(0); 
     }
                                                 int start()
  {
//----
  double profitbuy=0;double profitsell=0;
  string symbol = OrderSymbol();
  double spread = MarketInfo(symbol,MODE_SPREAD);
  double minLot = MarketInfo(symbol,MODE_MINLOT);
  if (minLot==0.01){dig=2;maxLot=MarketInfo(symbol,MODE_MAXLOT);}
  if (minLot==0.1){dig=1;maxLot=((AccountBalance()/2)/1000);}
  if(OrdersTotalMagicbuy(Magicbuy)>0)
  {
  double smbuy;
  for (cnt=0;cnt<OrdersTotal();cnt++)
    {
    OrderSelect(cnt,SELECT_BY_POS, MODE_TRADES);
    if (OrderSymbol() == Symbol() && OrderMagicNumber () == Magicbuy) 
      {
      ticketbuy = OrderTicket();OrderSelect(ticketbuy,SELECT_BY_TICKET, MODE_TRADES);
      smbuy = smbuy+OrderLots();openpricebuy = OrderOpenPrice();lastlotbuy = OrderLots();
      }
    }
    {   
    if (smbuy+(NormalizeDouble((lastlotbuy*mult),dig))<maxLot)
      {     
      if(StepMode==0)
        {
        if(Ask<=openpricebuy-step*Point)
          {
          lotsbuy2=lastlotbuy*mult;
          RefreshRates();ticketbuy=OrderSend(Symbol(),OP_BUY,NormalizeDouble(lotsbuy2,dig),Ask,3,0,0,"MartingailExpert",Magicbuy,0,Blue);
          }
        }
      if(StepMode==1)
        {
        if(Ask<=openpricebuy-(step+OrdersTotalMagicbuy(Magicbuy)+OrdersTotalMagicbuy(Magicbuy)-2)*Point)
          {
          lotsbuy2=lastlotbuy*mult;
          RefreshRates();ticketbuy=OrderSend(Symbol(),OP_BUY,NormalizeDouble(lotsbuy2,dig),Ask,3,0,0,"MartingailExpert",Magicbuy,0,Blue);
          } 
        }
      }
    }
  }
  if(OrdersTotalMagicsell(Magicsell)>0)
  {
  double smsell;
  for (cnt=0;cnt<OrdersTotal();cnt++)
    {
    OrderSelect(cnt,SELECT_BY_POS, MODE_TRADES);
    if (OrderSymbol() == Symbol() && OrderMagicNumber () == Magicsell)
      {
      ticketsell = OrderTicket();OrderSelect(ticketsell,SELECT_BY_TICKET, MODE_TRADES);
      smsell = smsell + OrderLots();openpricesell = OrderOpenPrice();lastlotsell = OrderLots();
      }     
    }
    {
    if (smsell+(NormalizeDouble((lastlotsell*mult),dig))<maxLot)
      {
      if(StepMode==0)
        {
        if(Bid>=openpricesell+step*Point)
          {
          lotssell2=lastlotsell*mult;
          RefreshRates();ticketsell=OrderSend(Symbol(),OP_SELL,NormalizeDouble(lotssell2,dig),Bid,3,0,0,"MartingailExpert",Magicsell,0,Red);
          }
        }
      if(StepMode==1)
        {
        if(Bid>=openpricesell+(step+OrdersTotalMagicsell(Magicsell)+OrdersTotalMagicsell(Magicsell)-2)*Point)
          {
          lotssell2=lastlotsell*mult;
          RefreshRates();ticketsell=OrderSend(Symbol(),OP_SELL,NormalizeDouble(lotssell2,dig),Bid,3,0,0,"MartingailExpert",Magicsell,0,Red);
          }
        }
      }
    }  
  }
  if(OrdersTotalMagicbuy(Magicbuy)<1)
  { 
  if(iStochastic(NULL,0,per_K,per_D,slow,MODE_LWMA,1,0,1)>iStochastic(NULL,0,per_K,per_D,slow,MODE_LWMA,1,1,1)
  && iStochastic(NULL,0,per_K,per_D,slow,MODE_LWMA,1,1,1)>zoneBUY)ticketbuy = OrderSend(Symbol(),OP_BUY,lotsbuy,Ask,3,0,0,"MartingailExpert",Magicbuy,0,Blue);
  }
  if(OrdersTotalMagicsell(Magicsell)<1)
  {
  if(iStochastic(NULL,0,per_K,per_D,slow,MODE_LWMA,1,0,1)<iStochastic(NULL,0,per_K,per_D,slow,MODE_LWMA,1,1,1)
  && iStochastic(NULL,0,per_K,per_D,slow,MODE_LWMA,1,1,1)<zoneSELL)ticketsell = OrderSend(Symbol(),OP_SELL,lotssell,Bid,3,0,0,"MartingailExpert",Magicsell,0,Red);
  }
  for (cnt=0;cnt<OrdersTotal();cnt++)
  {
  OrderSelect(cnt,SELECT_BY_POS,MODE_TRADES);
  if (OrderSymbol()==Symbol() && OrderMagicNumber () == Magicbuy)
    {
    ticketbuy = OrderTicket();OrderSelect(ticketbuy,SELECT_BY_TICKET, MODE_TRADES);profitbuy = profitbuy+OrderProfit() ;
    openpricebuy = OrderOpenPrice();
    }
  }  
  tpb = (OrdersTotalMagicbuy(Magicbuy)*proffactor*Point)+openpricebuy;
  double bid = MarketInfo(Symbol(),MODE_BID);
  if (profitbuy>0)
  {
  if (Bid>=tpb) orderclosebuy(ticketbuy);
  }
  for (cnt=0;cnt<OrdersTotal();cnt++)
  {   
  OrderSelect(cnt,SELECT_BY_POS,MODE_TRADES);
  if (OrderSymbol() == Symbol() && OrderMagicNumber() == Magicsell)
    {
    ticketsell = OrderTicket();OrderSelect(ticketsell,SELECT_BY_TICKET, MODE_TRADES);profitsell = profitsell+OrderProfit();
    openpricesell = OrderOpenPrice(); 
    }
  }
  tps = openpricesell-(OrdersTotalMagicsell(Magicsell)*proffactor*Point);
  double ask = MarketInfo(Symbol(),MODE_ASK);    
  if (profitsell>0)
  {
  if (Ask<=tps)orderclosesell(ticketsell);    
  }
  free = AccountFreeMargin();balance = AccountBalance();    
  for (cnt=0;cnt< OrdersTotal();cnt++)
  {   
  OrderSelect(cnt,SELECT_BY_POS,MODE_TRADES);
  if (OrderSymbol()==Symbol() && OrderMagicNumber () == Magicbuy)  ticketbuy = OrderTicket();
  if (OrderSymbol()==Symbol() && OrderMagicNumber () == Magicsell) ticketsell = OrderTicket();
  }
  if (OrdersTotalMagicbuy(Magicbuy)==0)
  {
  profitbuy=0;ticketbuy=0;tpb=0;
  }
  if (OrdersTotalMagicsell(Magicsell)==0)
  {
  profitsell=0;ticketsell=0;tps=0;
  }
  Comment("FreeMargin = ",NormalizeDouble(free,0),"  Balance = ",NormalizeDouble(balance,0),"  maxLot = ",NormalizeDouble(maxLot,dig),"\n",
  "Totalbuy = ",OrdersTotalMagicbuy(Magicbuy),"  Lot = ",smbuy,"  Totalsell = ",OrdersTotalMagicsell(Magicsell),"  Lot = ",smsell,"\n",
  "---------------------------------------------------------------","\n","Profitbuy = ",profitbuy,"\n",
  "Profitsell = ",profitsell);
//----
   for(int ii=0; ii<2; ii+=2)
     {
      ObjectDelete("rect"+ii);
      ObjectCreate("rect"+ii,OBJ_HLINE, 0, 0,tps);
      ObjectSet("rect"+ii, OBJPROP_COLOR, Red);
      ObjectSet("rect"+ii, OBJPROP_WIDTH, 1);
      ObjectSet("rect"+ii, OBJPROP_RAY, False);
      }    
   for(int rr=0; rr<2; rr+=2)
      {
      ObjectDelete("rect1"+rr);
      ObjectCreate("rect1"+rr,OBJ_HLINE, 0, 0,tpb);      
      ObjectSet("rect1"+rr, OBJPROP_COLOR, Blue);
      ObjectSet("rect1"+rr, OBJPROP_WIDTH, 1);
      ObjectSet("rect1"+rr, OBJPROP_RAY, False);     
     }
   return(0);
}  
//+------------------------------------------------------------------+

 

Yanıtlandı

1
Geliştirici 1
Derecelendirme
(851)
Projeler
1459
72%
Arabuluculuk
122
29% / 48%
Süresi dolmuş
356
24%
Çalışıyor
Yayınlandı: 3 makale
2
Geliştirici 2
Derecelendirme
(273)
Projeler
396
63%
Arabuluculuk
70
53% / 26%
Süresi dolmuş
198
50%
Serbest
3
Geliştirici 3
Derecelendirme
(59)
Projeler
182
55%
Arabuluculuk
31
45% / 16%
Süresi dolmuş
103
57%
Serbest
4
Geliştirici 4
Derecelendirme
(182)
Projeler
342
42%
Arabuluculuk
118
12% / 73%
Süresi dolmuş
104
30%
Serbest
Yayınlandı: 4 kod
5
Geliştirici 5
Derecelendirme
(9)
Projeler
20
70%
Arabuluculuk
1
0% / 100%
Süresi dolmuş
9
45%
Serbest
6
Geliştirici 6
Derecelendirme
(180)
Projeler
301
30%
Arabuluculuk
54
24% / 56%
Süresi dolmuş
98
33%
Serbest
7
Geliştirici 7
Derecelendirme
(4)
Projeler
7
43%
Arabuluculuk
5
0% / 60%
Süresi dolmuş
3
43%
Serbest
Yayınlandı: 1 kod
8
Geliştirici 8
Derecelendirme
(20)
Projeler
46
54%
Arabuluculuk
3
67% / 0%
Süresi dolmuş
14
30%
Serbest
9
Geliştirici 9
Derecelendirme
(59)
Projeler
90
39%
Arabuluculuk
26
4% / 77%
Süresi dolmuş
40
44%
Serbest
Benzer siparişler
Labouchere System has many series and can transfer the Units to any other Series when needed (this function is very important). The coders who really knows this cancellation sytem can apply. Also the coder should have practical usage of phyton language to translate this strategy into phyton to use it in crypto markets. No indicator or chart issues , but it has many mathematical functions and calculations . the code
Hello everyone, I’m looking for someone who can help me develop an Expert Advisor (EA) for Boom and Crash markets. I need a developer who has proven experience and has already developed at least 10–15 EAs for Boom and Crash. This will help save both your time and my time when filtering developers. The EA will include: EMA crossover strategy Different time filters Additional custom conditions and logic I’m also
I want to find a Developer to perform this work and settle payments in this Application. I undertake not to communicate with Applicants anywhere else except this Application, including third-party messengers, personal correspondence or emails. I understand that violators will be banned from publishing Orders in the Freelance service. I have read the Rules of using the Freelance service and accept them. I agree with
Overview: I would like to create a robot in MT5 (what I use) that when the price or candle touches a moving average it auto- matically gets me into a trade. Details or features I need: 1 a way to tell it how much to trade 0.10 or ten cents per pip or more or do I set this in MT5? 2 a way to limit the number of trades per candle or set it to two or three trades (if the price crosses over the moving average ten times I
Candle bot 30+ USD
A dual-direction breakout stacking EA using previous candle highs/lows as triggers with rolling pending orders and fixed micro take profits. It is suitable for: automation EA development trend capture with repeated entries recovery-style trade management
Szukam doświadczonego programisty do stworzenia dedykowanego doradcy eksperckiego (EA) do tradingu. Programista powinien posiadać solidną wiedzę z zakresu MT5, logiki strategii, wskaźników, zarządzania ryzykiem i backtestingu. Doświadczenie w tworzeniu niezawodnych i profesjonalnych robotów handlowych będzie dodatkowym atutem. Proszę o kontakt, jeśli zrealizowałeś już podobne projekty. wszystkie szczeguły podam w
I am looking to buy a ready-made automated trading robot / EA that works on the Tradovate platform and is proven to pass prop firm challenges for Apex Trader Funding, Tradeify, and Lucid Trading.Key Requirements (must be ready-made or very close to plug-and-play):Fully functional on Tradovate (native or via stable bridge/copier/webhook/API integration – MT5 EA + Tradovate bridge is acceptable if it works reliably)
Alex 1000+ USD
Нужен бот для скальпинга именно на Python. Работа напрямую через API биржи (без привязки к TradingView и MetaTrader). Бот будет запускаться локально на ноутбуке / VPS. Критически важна скорость (использование асинхронности, WebSockets
Looking for an experienced programmer to create a fully automated trading system. The EA must be able to detect SPECIFIC H&Shoulder patterns, identify entry point and open a position. Parameters: Candle Count : EX: 50 - meaning the max amount of candle history to look for a pattern. (user adjustable) RISK: EG "2" Meaning the position that must be opened must be 2% of the Balance of the account (user adjustable). The
I’m looking for an experienced MetaTrader 4 (MT4) developer to analyze, repair, and live-test an existing .EX4 Expert Advisor. Project Details Existing file: GannMadeEasy_pro.ex4 Platform: MetaTrader 4 Issue: EA is not loading properly on charts in newer MT4 builds Goal: Make the EA fully functional and compatible with current MT4 versions Requirements The developer must: Analyze the existing EX4 file Identify

Proje bilgisi

Bütçe
100 - 110 USD
Son teslim tarihi
from 1 to 7 gün