Convert Tradingview's (Pinescript) Engulfing Indicators to MQL5 for MetaTrader5 Use

İş tamamlandı

Tamamlanma süresi: 1 gün
Müşteri tarafından geri bildirim
Excellent work! Perfectly done and quick.
Geliştirici tarafından geri bildirim
Kind and correct customer. great!!!

İş Gereklilikleri

For bearish:

//@version=4

study("Engulfing - Bearish", shorttitle = "Engulfing - Bear", overlay=true)


C_DownTrend = true

C_UpTrend = true

var trendRule1 = "SMA50"

var trendRule2 = "SMA50, SMA200"

var trendRule = input(trendRule1, "Detect Trend Based On", options=[trendRule1, trendRule2, "No detection"])


if trendRule == trendRule1

priceAvg = sma(close, 50)

C_DownTrend := close < priceAvg

C_UpTrend := close > priceAvg


if trendRule == trendRule2

sma200 = sma(close, 200)

sma50 = sma(close, 50)

C_DownTrend := close < sma50 and sma50 < sma200

C_UpTrend := close > sma50 and sma50 > sma200

C_Len = 14 // ema depth for bodyAvg

C_ShadowPercent = 5.0 // size of shadows

C_ShadowEqualsPercent = 100.0

C_DojiBodyPercent = 5.0

C_Factor = 2.0 // shows the number of times the shadow dominates the candlestick body


C_BodyHi = max(close, open)

C_BodyLo = min(close, open)

C_Body = C_BodyHi - C_BodyLo

C_BodyAvg = ema(C_Body, C_Len)

C_SmallBody = C_Body < C_BodyAvg

C_LongBody = C_Body > C_BodyAvg

C_UpShadow = high - C_BodyHi

C_DnShadow = C_BodyLo - low

C_HasUpShadow = C_UpShadow > C_ShadowPercent / 100 * C_Body

C_HasDnShadow = C_DnShadow > C_ShadowPercent / 100 * C_Body

C_WhiteBody = open < close

C_BlackBody = open > close

C_Range = high-low

C_IsInsideBar = C_BodyHi[1] > C_BodyHi and C_BodyLo[1] < C_BodyLo

C_BodyMiddle = C_Body / 2 + C_BodyLo

C_ShadowEquals = C_UpShadow == C_DnShadow or (abs(C_UpShadow - C_DnShadow) / C_DnShadow * 100) < C_ShadowEqualsPercent and (abs(C_DnShadow - C_UpShadow) / C_UpShadow * 100) < C_ShadowEqualsPercent

C_IsDojiBody = C_Range > 0 and C_Body <= C_Range * C_DojiBodyPercent / 100

C_Doji = C_IsDojiBody and C_ShadowEquals


patternLabelPosLow = low - (atr(30) * 0.6)

patternLabelPosHigh = high + (atr(30) * 0.6)


C_EngulfingBearishNumberOfCandles = 2

C_EngulfingBearish = C_UpTrend and C_BlackBody and C_LongBody and C_WhiteBody[1] and C_SmallBody[1] and close <= open[1] and open >= close[1] and ( close < open[1] or open > close[1] )

alertcondition(C_EngulfingBearish, title = "Engulfing", message = "New Engulfing - Bearish pattern detected.")

if C_EngulfingBearish

    var ttBearishEngulfing = "Engulfing\nAt the end of a given uptrend, a reversal pattern will most likely appear. During the first day, this candlestick pattern uses a small body. It is then followed by a day where the candle body fully overtakes the body from the day before it and closes in the trend’s opposite direction. Although similar to the outside reversal chart pattern, it is not essential for this pattern to fully overtake the range (high to low), rather only the open and the close."

    label.new(bar_index, patternLabelPosHigh, text="BE", style=label.style_label_down, color = color.red, textcolor=color.white, tooltip = ttBearishEngulfing)

bgcolor(highest(C_EngulfingBearish?1:0, C_EngulfingBearishNumberOfCandles)!=0 ? color.red : na, offset=-(C_EngulfingBearishNumberOfCandles-1))



For bullish:

//@version=4

study("Engulfing - Bullish", shorttitle = "Engulfing - Bull", overlay=true)


C_DownTrend = true

C_UpTrend = true

var trendRule1 = "SMA50"

var trendRule2 = "SMA50, SMA200"

var trendRule = input(trendRule1, "Detect Trend Based On", options=[trendRule1, trendRule2, "No detection"])


if trendRule == trendRule1

priceAvg = sma(close, 50)

C_DownTrend := close < priceAvg

C_UpTrend := close > priceAvg


if trendRule == trendRule2

sma200 = sma(close, 200)

sma50 = sma(close, 50)

C_DownTrend := close < sma50 and sma50 < sma200

C_UpTrend := close > sma50 and sma50 > sma200

C_Len = 14 // ema depth for bodyAvg

C_ShadowPercent = 5.0 // size of shadows

C_ShadowEqualsPercent = 100.0

C_DojiBodyPercent = 5.0

C_Factor = 2.0 // shows the number of times the shadow dominates the candlestick body


C_BodyHi = max(close, open)

C_BodyLo = min(close, open)

C_Body = C_BodyHi - C_BodyLo

C_BodyAvg = ema(C_Body, C_Len)

C_SmallBody = C_Body < C_BodyAvg

C_LongBody = C_Body > C_BodyAvg

C_UpShadow = high - C_BodyHi

C_DnShadow = C_BodyLo - low

C_HasUpShadow = C_UpShadow > C_ShadowPercent / 100 * C_Body

C_HasDnShadow = C_DnShadow > C_ShadowPercent / 100 * C_Body

C_WhiteBody = open < close

C_BlackBody = open > close

C_Range = high-low

C_IsInsideBar = C_BodyHi[1] > C_BodyHi and C_BodyLo[1] < C_BodyLo

C_BodyMiddle = C_Body / 2 + C_BodyLo

C_ShadowEquals = C_UpShadow == C_DnShadow or (abs(C_UpShadow - C_DnShadow) / C_DnShadow * 100) < C_ShadowEqualsPercent and (abs(C_DnShadow - C_UpShadow) / C_UpShadow * 100) < C_ShadowEqualsPercent

C_IsDojiBody = C_Range > 0 and C_Body <= C_Range * C_DojiBodyPercent / 100

C_Doji = C_IsDojiBody and C_ShadowEquals


patternLabelPosLow = low - (atr(30) * 0.6)

patternLabelPosHigh = high + (atr(30) * 0.6)


C_EngulfingBullishNumberOfCandles = 2

C_EngulfingBullish = C_DownTrend and C_WhiteBody and C_LongBody and C_BlackBody[1] and C_SmallBody[1] and close >= open[1] and open <= close[1] and ( close > open[1] or open < close[1] )

alertcondition(C_EngulfingBullish, title = "Engulfing", message = "New Engulfing - Bullish pattern detected.")

if C_EngulfingBullish

    var ttBullishEngulfing = "Engulfing\nAt the end of a given downward trend, there will most likely be a reversal pattern. To distinguish the first day, this candlestick pattern uses a small body, followed by a day where the candle body fully overtakes the body from the day before, and closes in the trend’s opposite direction. Although similar to the outside reversal chart pattern, it is not essential for this pattern to completely overtake the range (high to low), rather only the open and the close."

    label.new(bar_index, patternLabelPosLow, text="BE", style=label.style_label_up, color = color.blue, textcolor=color.white, tooltip = ttBullishEngulfing)

bgcolor(highest(C_EngulfingBullish?1:0, C_EngulfingBullishNumberOfCandles)!=0 ? color.blue : na, offset=-(C_EngulfingBullishNumberOfCandles-1))


*The bullish and bearish indicators shall be combined into one indicator, any object e.g. arrow can be used to indicate the signal, plus integration of alerts. Trend rules not necessary and may be removed for simplicity. Conditions in bold text are the only ones necessary to create arrow object and alert. Thank you.


Yanıtlandı

1
Geliştirici 1
Derecelendirme
(174)
Projeler
199
12%
Arabuluculuk
38
37% / 34%
Süresi dolmuş
5
3%
Çalışıyor
Yayınlandı: 2 kod
2
Geliştirici 2
Derecelendirme
(132)
Projeler
178
39%
Arabuluculuk
4
25% / 50%
Süresi dolmuş
14
8%
Serbest
3
Geliştirici 3
Derecelendirme
(412)
Projeler
543
75%
Arabuluculuk
9
44% / 0%
Süresi dolmuş
24
4%
Serbest
Benzer siparişler
I need help in modifying an amibroker AFL indicator the indicator already works but I need per symbol static variable isolation, parameters persistence per symbol after restart, non declining trailing stop logic, parameter auto restore when switching symbols and a global reset function for static variables. For better understanding As discussed, this is the official offer for restructuring my RAD Chandelier stop loss
I am looking for an experienced MQL5 developer who already has or can provide an advanced grid-style Expert Advisor based on Bollinger Bands, designed for trading multiple forex pairs simultaneously. The EA should use intelligent grid placement logic derived from Bollinger Band levels, with dynamic lot sizing, proper risk management, and optimized trade management to handle ranging and volatile market conditions
Hi, I have a clear MT5 EA wrapper project with locked TSCEA, requiring enhanced execution logic (“pending OR better market” order handling). I can share detailed spec. Please let me know your availability and quote range. Thanks, Tom Pike ------------------------------------------------------------------------------------------------------------------------------ Title: MT5 Wrapper EA – “Limit Order OR Better
ICT_OneTrade_2R 100 - 200 USD
🔥 ICT_OneTrade_2R Precision. Discipline. Consistency. ICT_OneTrade_2R is a professional Expert Advisor designed for traders who value structured execution and controlled risk. This system is built around a fixed Risk-to-Reward ratio of 1:2 (RR 2.0) — meaning every trade is planned with precision: Risk 1 → Target 2. No randomness. No overtrading. Just one high-quality trade per session. ⚙️ Key Features ✔ Fixed RR 1:2
Subject: Upgrade Trading Bot to Professional Dynamic Hedging on Current Candle Hello [Developer Name], I currently have a trading bot that operates with pending orders (Buy Stop and Sell Stop) using Take Profit, Stop Loss, and Trailing Stop. I want to upgrade it to a professional, dynamic hedging system that: Opens trades on the current candle directly, without waiting for future triggers. Manages trades
Trade settings: --------------------------------- fixed lot size ….. 0.0 Buy /Sell distance market order…. 0.0 - 700.0 points Buy / Sell distance pending order Entry---- 0.0 - 700.0 points Max Trade------ 10.0 Min spread...… 0.0 points Max spread..... 3000.0 points Daily profit percentage ….. 0.0 - 100 % Global Stoploss Percentage----- 0.0 - 100 % Max Daily loss Percentage ------0.0 - 100 % Stop level = 0.0 point
Hi , I have some indicators that I want set up on my TV chart and want to create one chart for some and another chart for some others. Plus I want to set up the brackets orders so I can trade from the chart. I have these set up somewhat but need it cleaned up and the way I want them. how much would something like this cost to do? I'm in California and would like you to show me so I can learn to do this when I want to
Apply with a keen sense of responsibility . Copy the code . Both of my expert has sufficient materials . Its a simple winning strategy , therefore please be ahead of time . Code BLUE . Changing The Strategy According to what i think is correct
I would love to see most of my trades going well being in profits! & keep consistent trading without having to blow any accounts be able to identify right trades and have good trading strategy
Yash Agrawal 30+ USD
// Simple EMA Bot input int FastEMA = 9; input int SlowEMA = 21; void OnTick() { double fast = iMA(NULL,0,FastEMA,0,MODE_EMA,PRICE_CLOSE,0); double slow = iMA(NULL,0,SlowEMA,0,MODE_EMA,PRICE_CLOSE,0); if(fast > slow) { if(PositionsTotal()==0) OrderSend(Symbol(),OP_BUY,0.01,Ask,10,0,0); } if(fast < slow) { if(PositionsTotal()==0) OrderSend(Symbol(),OP_SELL,0.01,Bid,10,0,0); } }

Proje bilgisi

Bütçe
30 - 40 USD
Son teslim tarihi
from 2 to 4 gün